From: Kalle Valo <kvalo@qca.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 5/8] ath10k: delete ar_pci->fw_indicator_address
Date: Tue, 25 Mar 2014 11:15:28 +0200 [thread overview]
Message-ID: <20140325091528.16651.24296.stgit@potku.adurom.net> (raw)
In-Reply-To: <20140325091311.16651.15747.stgit@potku.adurom.net>
It always contains the same constant, no need to have a separate variable for it.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 16 ++++++----------
drivers/net/wireless/ath/ath10k/pci.h | 3 ---
2 files changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index e70dde1beaca..0d8efba160dd 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1750,16 +1750,15 @@ static int ath10k_pci_ce_init(struct ath10k *ar)
static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
{
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
- u32 fw_indicator_address, fw_indicator;
+ u32 fw_indicator;
ath10k_pci_wake(ar);
- fw_indicator_address = ar_pci->fw_indicator_address;
- fw_indicator = ath10k_pci_read32(ar, fw_indicator_address);
+ fw_indicator = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
if (fw_indicator & FW_IND_EVENT_PENDING) {
/* ACK: clear Target-side pending event */
- ath10k_pci_write32(ar, fw_indicator_address,
+ ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS,
fw_indicator & ~FW_IND_EVENT_PENDING);
if (ar_pci->started) {
@@ -1778,7 +1777,6 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
static int ath10k_pci_warm_reset(struct ath10k *ar)
{
- struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
int ret = 0;
u32 val;
@@ -1810,7 +1808,7 @@ static int ath10k_pci_warm_reset(struct ath10k *ar)
msleep(100);
/* clear fw indicator */
- ath10k_pci_write32(ar, ar_pci->fw_indicator_address, 0);
+ ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS, 0);
/* clear target LF timer interrupts */
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
@@ -2151,7 +2149,6 @@ static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg)
static void ath10k_pci_early_irq_tasklet(unsigned long data)
{
struct ath10k *ar = (struct ath10k *)data;
- struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
u32 fw_ind;
int ret;
@@ -2162,9 +2159,9 @@ static void ath10k_pci_early_irq_tasklet(unsigned long data)
return;
}
- fw_ind = ath10k_pci_read32(ar, ar_pci->fw_indicator_address);
+ fw_ind = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
if (fw_ind & FW_IND_EVENT_PENDING) {
- ath10k_pci_write32(ar, ar_pci->fw_indicator_address,
+ ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS,
fw_ind & ~FW_IND_EVENT_PENDING);
/* Some structures are unavailable during early boot or at
@@ -2537,7 +2534,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
}
ar_pci->ar = ar;
- ar_pci->fw_indicator_address = FW_INDICATOR_ADDRESS;
atomic_set(&ar_pci->keep_awake_count, 0);
pci_set_drvdata(pdev, ar);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index b43fdb4f7319..dfdebb4157aa 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -189,9 +189,6 @@ struct ath10k_pci {
struct ath10k_hif_cb msg_callbacks_current;
- /* Target address used to signal a pending firmware event */
- u32 fw_indicator_address;
-
/* Copy Engine used for Diagnostic Accesses */
struct ath10k_ce_pipe *ce_diag;
next prev parent reply other threads:[~2014-03-25 9:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-25 9:14 [PATCH 0/8] ath10k: small cleanups to pci.c Kalle Valo
2014-03-25 9:15 ` [PATCH 1/8] ath10k: cleanup ath10k_pci_wait_for_target_init() Kalle Valo
2014-03-25 9:32 ` Michal Kazior
2014-03-26 9:28 ` Kalle Valo
2014-03-26 9:52 ` Michal Kazior
2014-03-26 11:10 ` Kalle Valo
2014-03-25 9:15 ` [PATCH 2/8] ath10k: add module parameter to disable cold reset Kalle Valo
2014-03-25 9:15 ` [PATCH 3/8] ath10k: fix name of target_ps module parameter Kalle Valo
2014-03-25 9:15 ` [PATCH 4/8] ath10k: advertise only firmware API 2 files Kalle Valo
2014-03-25 9:15 ` Kalle Valo [this message]
2014-03-25 9:15 ` [PATCH 6/8] ath10k: improve pci debug messages Kalle Valo
2014-03-25 9:15 ` [PATCH 7/8] ath10k: add module parameter values to the pci info print Kalle Valo
2014-03-25 9:15 ` [PATCH 8/8] ath10k: print chip id during boot Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140325091528.16651.24296.stgit@potku.adurom.net \
--to=kvalo@qca.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox