[PATCH] NFC: pn544: Auto-select core module

[PATCH] NFC: pn544: Auto-select core module

[Jean Delvare]

As I understand it, the core nfc_pn544 module is useless without
either the I2C or the MEI access module. So hide NFC_PN544 and
select it automatically if either NFC_PN544_I2C or NFC_PN544_MEI is
selected.

This avoids presenting NFC_PN544 when neither NFC_PN544_I2C nor
NFC_PN544_MEI can be selected.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/nfc/pn544/Kconfig |   18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

--- linux-3.15-rc1.orig/drivers/nfc/pn544/Kconfig	2014-04-18 19:18:55.998723014 +0200
+++ linux-3.15-rc1/drivers/nfc/pn544/Kconfig	2014-04-18 19:19:16.195149146 +0200
@@ -1,20 +1,15 @@
 config NFC_PN544
-	tristate "NXP PN544 NFC driver"
-	depends on NFC_HCI
+	tristate
 	select CRC_CCITT
-	default n
 	---help---
 	  NXP PN544 core driver.
 	  This is a driver based on the HCI NFC kernel layers and
 	  will thus not work with NXP libnfc library.
 
-	  To compile this driver as a module, choose m here. The module will
-	  be called pn544.
-	  Say N if unsure.
-
 config NFC_PN544_I2C
-	tristate "NFC PN544 i2c support"
-	depends on NFC_PN544 && I2C && NFC_SHDLC
+	tristate "NXP PN544 device support (I2C)"
+	depends on NFC_HCI && I2C && NFC_SHDLC
+	select NFC_PN544
 	---help---
 	  This module adds support for the NXP pn544 i2c interface.
 	  Select this if your platform is using the i2c bus.
@@ -23,8 +18,9 @@ config NFC_PN544_I2C
 	  Say N if unsure.
 
 config NFC_PN544_MEI
-	tristate "NFC PN544 MEI support"
-	depends on NFC_PN544 && NFC_MEI_PHY
+	tristate "NXP PN544 device support (MEI)"
+	depends on NFC_HCI && NFC_MEI_PHY
+	select NFC_PN544
 	---help---
 	  This module adds support for the mei interface of adapters using
 	  NXP pn544 chipsets.  Select this if your pn544 chipset


-- 
Jean Delvare
SUSE L3 Support