Linux wireless drivers development
 help / color / mirror / Atom feed
* [PATCH] ath10k: Fix a typo in spectral code commments
@ 2016-06-14  5:33 Mohammed Shafi Shajakhan
  2016-06-16 15:59 ` Bob Copeland
       [not found] ` <575FC1E5.90108@vitracom.de>
  0 siblings, 2 replies; 4+ messages in thread
From: Mohammed Shafi Shajakhan @ 2016-06-14  5:33 UTC (permalink / raw)
  To: ath10k; +Cc: mohammed, linux-wireless, Mohammed Shafi Shajakhan

From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>

Found this obvious typo while going through the spectral
code design in ath10k

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/spectral.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/spectral.c b/drivers/net/wireless/ath/ath10k/spectral.c
index 4671cfb..4510906 100644
--- a/drivers/net/wireless/ath/ath10k/spectral.c
+++ b/drivers/net/wireless/ath/ath10k/spectral.c
@@ -101,7 +101,7 @@ int ath10k_spectral_process_fft(struct ath10k *ar,
 		break;
 	case 80:
 		/* TODO: As experiments with an analogue sender and various
-		 * configuaritions (fft-sizes of 64/128/256 and 20/40/80 Mhz)
+		 * configurations (fft-sizes of 64/128/256 and 20/40/80 Mhz)
 		 * show, the particular configuration of 80 MHz/64 bins does
 		 * not match with the other smaples at all. Until the reason
 		 * for that is found, don't report these samples.
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2016-06-16 16:07 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-14  5:33 [PATCH] ath10k: Fix a typo in spectral code commments Mohammed Shafi Shajakhan
2016-06-16 15:59 ` Bob Copeland
2016-06-16 16:04   ` Mohammed Shafi Shajakhan
     [not found] ` <575FC1E5.90108@vitracom.de>
2016-06-16 16:06   ` Shajakhan, Mohammed Shafi (Mohammed Shafi)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox