[PATCH] wireless-regdb: Remove DFS requirement for India (IN)

[PATCH] wireless-regdb: Remove DFS requirement for India (IN)

[Jouni Malinen]

The "Indoor Use of low power wireless equipment in the frequency band 5
GHz (Exemption from Licensing Requirement) Rules, 2005" notification by
Ministry of Communications and Information Technology (Wireless Planning
and Coordination Wing) (New Delhi, the 28th January 2005) does not
mandate use of DFS, so remove the DFS flag from the 5250-5330 MHz band
in India.

In addition, increase the TX power limit to 23 dBm to match the 200 mW
maximum mentioned in the same notification. Also use the exact ranges
from that notification and enable use of 160 MHz channels in the
5150-5350 MHz band.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
---
 db.txt | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/db.txt b/db.txt
index 7964cfb..05108e0 100644
--- a/db.txt
+++ b/db.txt
@@ -580,11 +580,10 @@ country IL: DFS-ETSI
 	(5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
 	(5250 - 5350 @ 80), (200 mW), NO-OUTDOOR, DFS, AUTO-BW
 
-country IN: DFS-JP
+country IN:
 	(2402 - 2482 @ 40), (20)
-	(5170 - 5250 @ 80), (20), AUTO-BW
-	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
-	(5735 - 5835 @ 80), (20)
+	(5150 - 5350 @ 160), (23)
+	(5725 - 5875 @ 80), (23)
 
 country IR: DFS-JP
 	(2402 - 2482 @ 40), (20)
-- 
2.7.4

Re: [PATCH] wireless-regdb: Remove DFS requirement for India (IN)

[Seth Forshee]

On Mon, Jan 30, 2017 at 02:08:32PM +0200, Jouni Malinen wrote:
> The "Indoor Use of low power wireless equipment in the frequency band 5
> GHz (Exemption from Licensing Requirement) Rules, 2005" notification by
> Ministry of Communications and Information Technology (Wireless Planning
> and Coordination Wing) (New Delhi, the 28th January 2005) does not
> mandate use of DFS, so remove the DFS flag from the 5250-5330 MHz band
> in India.
> 
> In addition, increase the TX power limit to 23 dBm to match the 200 mW
> maximum mentioned in the same notification. Also use the exact ranges
> from that notification and enable use of 160 MHz channels in the
> 5150-5350 MHz band.
> 
> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>

Applied, thanks.