[PATCH AUTOSEL 4.19 29/65] mac80211: fix miscounting of ttl-dropped frames

[PATCH AUTOSEL 4.19 29/65] mac80211: fix miscounting of ttl-dropped frames

[Sasha Levin]

From: Bob Copeland <me@bobcopeland.com>

[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ]

In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl'
counter when we decrement the ttl to zero.  For unicast frames
destined for other hosts, we stop processing the frame at that point.

For multicast frames, we do not rebroadcast it in this case, but we
do pass the frame up the stack to process it on this STA.  That
doesn't match the usual definition of "dropped," so don't count
those as such.

With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a
peer in a ttl=1 network no longer increments the counter rapidly.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 5e2b4a41acf1..77cfa62274f3 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2676,7 +2676,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 	skb_set_queue_mapping(skb, q);
 
 	if (!--mesh_hdr->ttl) {
-		IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
+		if (!is_multicast_ether_addr(hdr->addr1))
+			IEEE80211_IFSTA_MESH_CTR_INC(ifmsh,
+						     dropped_frames_ttl);
 		goto out;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 59/65] mac80211: don't initiate TDLS connection if station is not associated to AP

[Sasha Levin]

From: Balaji Pothunoori <bpothuno@codeaurora.org>

[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ]

Following call trace is observed while adding TDLS peer entry in driver
during TDLS setup.

Call Trace:
[<c1301476>] dump_stack+0x47/0x61
[<c10537d2>] __warn+0xe2/0x100
[<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211]
[<c1053895>] warn_slowpath_null+0x25/0x30
[<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211]
[<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211]
[<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211]
[<c1876fe3>] nl80211_new_station+0x273/0x420
[<c170f6d9>] genl_rcv_msg+0x219/0x3c0
[<c170f4c0>] ? genl_rcv+0x30/0x30
[<c170ee7e>] netlink_rcv_skb+0x8e/0xb0
[<c170f4ac>] genl_rcv+0x1c/0x30
[<c170e8aa>] netlink_unicast+0x13a/0x1d0
[<c170ec18>] netlink_sendmsg+0x2d8/0x390
[<c16c5acd>] sock_sendmsg+0x2d/0x40
[<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0

Fixing this by allowing TDLS setup request only when we have completed
association.

Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/cfg.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 5d22eda8a6b1..8089af436ff7 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1474,6 +1474,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 	if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
 		sta->sta.tdls = true;
 
+	if (sta->sta.tdls && sdata->vif.type == NL80211_IFTYPE_STATION &&
+	    !sdata->u.mgd.associated)
+		return -EINVAL;
+
 	err = sta_apply_parameters(local, sta, params);
 	if (err) {
 		sta_info_free(local, sta);
-- 
2.19.1

[PATCH AUTOSEL 4.19 60/65] mac80211: Add attribute aligned(2) to struct 'action'

[Sasha Levin]

From: Mathieu Malaterre <malat@debian.org>

[ Upstream commit 7c53eb5d87bc21464da4268c3c0c47457b6d9c9b ]

During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO
follow-MAC mode") a new struct 'action' was declared with packed
attribute as:

  struct {
          struct ieee80211_hdr_3addr hdr;
          u8 category;
          u8 action_code;
  } __packed action;

But since struct 'ieee80211_hdr_3addr' is declared with an aligned
keyword as:

  struct ieee80211_hdr {
  	__le16 frame_control;
  	__le16 duration_id;
  	u8 addr1[ETH_ALEN];
  	u8 addr2[ETH_ALEN];
  	u8 addr3[ETH_ALEN];
  	__le16 seq_ctrl;
  	u8 addr4[ETH_ALEN];
  } __packed __aligned(2);

Solve the ambiguity of placing aligned structure in a packed one by
adding the aligned(2) attribute to struct 'action'.

This removes the following warning (W=1):

  net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned]

Cc: Johannes Berg <johannes.berg@intel.com>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 77cfa62274f3..a804ef55ec60 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -220,7 +220,7 @@ static void ieee80211_handle_mu_mimo_mon(struct ieee80211_sub_if_data *sdata,
 		struct ieee80211_hdr_3addr hdr;
 		u8 category;
 		u8 action_code;
-	} __packed action;
+	} __packed __aligned(2) action;
 
 	if (!sdata)
 		return;
-- 
2.19.1

[PATCH AUTOSEL 4.19 61/65] cfg80211: extend range deviation for DMG

[Sasha Levin]

From: Chaitanya Tata <chaitanya.tata@bluwirelesstechnology.com>

[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ]

Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/reg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 24cfa2776f50..8002ace7c9f6 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1249,7 +1249,7 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd)
  * definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"),
  * however it is safe for now to assume that a frequency rule should not be
  * part of a frequency's band if the start freq or end freq are off by more
- * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the
+ * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 20 GHz for the
  * 60 GHz band.
  * This resolution can be lowered and should be considered as we add
  * regulatory rule support for other "bands".
@@ -1264,7 +1264,7 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
 	 * with the Channel starting frequency above 45 GHz.
 	 */
 	u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ?
-			10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
+			20 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
 	if (abs(freq_khz - freq_range->start_freq_khz) <= limit)
 		return true;
 	if (abs(freq_khz - freq_range->end_freq_khz) <= limit)
-- 
2.19.1