[PATCH AUTOSEL 4.9 24/87] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies

[PATCH AUTOSEL 4.9 24/87] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies

[Sasha Levin]

From: Alexei Avshalom Lazar <ailizaro@codeaurora.org>

[ Upstream commit de77a53c2d1e8fb3621e63e8e1f0f0c9a1a99ff7 ]

ies1 or ies2 might be null when code inside
_wil_cfg80211_merge_extra_ies access them.
Add explicit check for null and make sure ies1/ies2 are not
accessed in such a case.

spos might be null and be accessed inside
_wil_cfg80211_merge_extra_ies.
Add explicit check for null in the while condition statement
and make sure spos is not accessed in such a case.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index d117240d9a73..b8eeaef17edc 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1005,6 +1005,12 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
 	u8 *buf, *dpos;
 	const u8 *spos;
 
+	if (!ies1)
+		ies1_len = 0;
+
+	if (!ies2)
+		ies2_len = 0;
+
 	if (ies1_len == 0 && ies2_len == 0) {
 		*merged_ies = NULL;
 		*merged_len = 0;
@@ -1014,17 +1020,19 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
 	buf = kmalloc(ies1_len + ies2_len, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
-	memcpy(buf, ies1, ies1_len);
+	if (ies1)
+		memcpy(buf, ies1, ies1_len);
 	dpos = buf + ies1_len;
 	spos = ies2;
-	while (spos + 1 < ies2 + ies2_len) {
+	while (spos && (spos + 1 < ies2 + ies2_len)) {
 		/* IE tag at offset 0, length at offset 1 */
 		u16 ielen = 2 + spos[1];
 
 		if (spos + ielen > ies2 + ies2_len)
 			break;
 		if (spos[0] == WLAN_EID_VENDOR_SPECIFIC &&
-		    !_wil_cfg80211_find_ie(ies1, ies1_len, spos, ielen)) {
+		    (!ies1 || !_wil_cfg80211_find_ie(ies1, ies1_len,
+						     spos, ielen))) {
 			memcpy(dpos, spos, ielen);
 			dpos += ielen;
 		}
-- 
2.19.1

[PATCH AUTOSEL 4.9 46/87] iwlwifi: pcie: fix emergency path

[Sasha Levin]

From: Sara Sharon <sara.sharon@intel.com>

[ Upstream commit c6ac9f9fb98851f47b978a9476594fc3c477a34d ]

Allocator swaps the pending requests with 0 when it starts
working. This means that relying on it n RX path to decide if
to move to emergency is not always a good idea, since it may
be zero, but there are still a lot of unallocated RBs in the
system. Change allocator to decrement the pending requests on
real time. It is more expensive since it accesses the atomic
variable more times, but it gives the RX path a better idea
of the system's status.

Reported-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes: 868a1e863f95 ("iwlwifi: pcie: avoid empty free RB queue")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index e58a50d31d96..c21f8bd32d08 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -475,7 +475,7 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	struct iwl_rb_allocator *rba = &trans_pcie->rba;
 	struct list_head local_empty;
-	int pending = atomic_xchg(&rba->req_pending, 0);
+	int pending = atomic_read(&rba->req_pending);
 
 	IWL_DEBUG_RX(trans, "Pending allocation requests = %d\n", pending);
 
@@ -530,11 +530,13 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
 			i++;
 		}
 
+		atomic_dec(&rba->req_pending);
 		pending--;
+
 		if (!pending) {
-			pending = atomic_xchg(&rba->req_pending, 0);
+			pending = atomic_read(&rba->req_pending);
 			IWL_DEBUG_RX(trans,
-				     "Pending allocation requests = %d\n",
+				     "Got more pending allocation requests = %d\n",
 				     pending);
 		}
 
@@ -546,12 +548,15 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
 		spin_unlock(&rba->lock);
 
 		atomic_inc(&rba->req_ready);
+
 	}
 
 	spin_lock(&rba->lock);
 	/* return unused rbds to the allocator empty list */
 	list_splice_tail(&local_empty, &rba->rbd_empty);
 	spin_unlock(&rba->lock);
+
+	IWL_DEBUG_RX(trans, "%s, exit.\n", __func__);
 }
 
 /*
-- 
2.19.1

[PATCH AUTOSEL 4.9 65/87] mt7601u: bump supported EEPROM version

[Sasha Levin]

From: Stanislaw Gruszka <sgruszka@redhat.com>

[ Upstream commit 3bd1505fed71d834f45e87b32ff07157fdda47e0 ]

As reported by Michael eeprom 0d is supported and work with the driver.

Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param
with 0d EEPORM looks like this:

RSSI offset: 0 0
Reference temp: f9
LNA gain: 8
Reg channels: 1-14
Per rate power:
	 raw:05 bw20:05 bw40:05
	 raw:05 bw20:05 bw40:05
	 raw:03 bw20:03 bw40:03
	 raw:03 bw20:03 bw40:03
	 raw:04 bw20:04 bw40:04
	 raw:00 bw20:00 bw40:00
	 raw:00 bw20:00 bw40:00
	 raw:00 bw20:00 bw40:00
	 raw:02 bw20:02 bw40:02
	 raw:00 bw20:00 bw40:00
Per channel power:
	 tx_power  ch1:09 ch2:09
	 tx_power  ch3:0a ch4:0a
	 tx_power  ch5:0a ch6:0a
	 tx_power  ch7:0b ch8:0b
	 tx_power  ch9:0b ch10:0b
	 tx_power  ch11:0b ch12:0b
	 tx_power  ch13:0b ch14:0b

Reported-and-tested-by: Michael <ZeroBeat@gmx.de>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt7601u/eeprom.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.h b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
index 662d12703b69..57b503ae63f1 100644
--- a/drivers/net/wireless/mediatek/mt7601u/eeprom.h
+++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
@@ -17,7 +17,7 @@
 
 struct mt7601u_dev;
 
-#define MT7601U_EE_MAX_VER			0x0c
+#define MT7601U_EE_MAX_VER			0x0d
 #define MT7601U_EEPROM_SIZE			256
 
 #define MT7601U_DEFAULT_TX_POWER		6
-- 
2.19.1

[PATCH AUTOSEL 4.9 83/87] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure

[Sasha Levin]

From: Zumeng Chen <zumeng.chen@gmail.com>

[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ]

Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware
failed instead of meaningless goto out to avoid the following memory leak
reports(Only the last one listed):

unreferenced object 0xc28a9a00 (size 512):
  comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
  backtrace:
    [<6624adab>] kmemleak_alloc+0x40/0x74
    [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270
    [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore]
    [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore]
    [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211]
    [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211]
    [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211]
    [<7e1d425a>] process_one_work+0x284/0x42c
    [<55f9432e>] worker_thread+0x2fc/0x48c
    [<abb582c6>] kthread+0x148/0x160
    [<63144b13>] ret_from_fork+0x14/0x2c
    [< (null)>] (null)
    [<1f6e7715>] 0xffffffff

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wlcore/main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 5438975c7ff2..17d32ce5d16b 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1058,8 +1058,11 @@ static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt)
 		goto out;
 
 	ret = wl12xx_fetch_firmware(wl, plt);
-	if (ret < 0)
-		goto out;
+	if (ret < 0) {
+		kfree(wl->fw_status);
+		kfree(wl->raw_fw_status);
+		kfree(wl->tx_res_if);
+	}
 
 out:
 	return ret;
-- 
2.19.1