[PATCH AUTOSEL 4.19 027/244] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()

[PATCH AUTOSEL 4.19 027/244] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e025da3d7aa4770bb1d1b3b0aa7cc4da1744852d ]

If "ret_len" is negative then it could lead to a NULL dereference.

The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
then we don't allocate the "dcmd_buf" buffer.  Then we pass "ret_len" to
brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
Most of the functions in that call tree check whether the buffer we pass
is NULL but there are at least a couple places which don't such as
brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd().  We memcpy() to and
from the buffer so it would result in a NULL dereference.

The fix is to change the types so that "ret_len" can't be negative.  (If
we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
issue).

Fixes: 1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
index 8eff2753abade..d493021f60318 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
@@ -35,9 +35,10 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 	struct brcmf_if *ifp;
 	const struct brcmf_vndr_dcmd_hdr *cmdhdr = data;
 	struct sk_buff *reply;
-	int ret, payload, ret_len;
+	unsigned int payload, ret_len;
 	void *dcmd_buf = NULL, *wr_pointer;
 	u16 msglen, maxmsglen = PAGE_SIZE - 0x100;
+	int ret;
 
 	if (len < sizeof(*cmdhdr)) {
 		brcmf_err("vendor command too short: %d\n", len);
@@ -65,7 +66,7 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 			brcmf_err("oversize return buffer %d\n", ret_len);
 			ret_len = BRCMF_DCMD_MAXLEN;
 		}
-		payload = max(ret_len, len) + 1;
+		payload = max_t(unsigned int, ret_len, len) + 1;
 		dcmd_buf = vzalloc(payload);
 		if (NULL == dcmd_buf)
 			return -ENOMEM;
-- 
2.20.1

[PATCH AUTOSEL 4.19 043/244] iwlwifi: pcie: don't crash on invalid RX interrupt

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 30f24eabab8cd801064c5c37589d803cb4341929 ]

If for some reason the device gives us an RX interrupt before we're
ready for it, perhaps during device power-on with misconfigured IRQ
causes mapping or so, we can crash trying to access the queues.

Prevent that by checking that we actually have RXQs and that they
were properly allocated.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index b2905f01b7df3..6dcd5374d9b4d 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1388,10 +1388,15 @@ static struct iwl_rx_mem_buffer *iwl_pcie_get_rxb(struct iwl_trans *trans,
 static void iwl_pcie_rx_handle(struct iwl_trans *trans, int queue)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	struct iwl_rxq *rxq = &trans_pcie->rxq[queue];
+	struct iwl_rxq *rxq;
 	u32 r, i, count = 0;
 	bool emergency = false;
 
+	if (WARN_ON_ONCE(!trans_pcie->rxq || !trans_pcie->rxq[queue].bd))
+		return;
+
+	rxq = &trans_pcie->rxq[queue];
+
 restart:
 	spin_lock(&rxq->lock);
 	/* uCode's read index (stored in shared DRAM) indicates the last Rx
-- 
2.20.1

[PATCH AUTOSEL 4.19 052/244] mac80211/cfg80211: update bss channel on channel switch

[Sasha Levin]

From: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>

[ Upstream commit 5dc8cdce1d722c733f8c7af14c5fb595cfedbfa8 ]

FullMAC STAs have no way to update bss channel after CSA channel switch
completion. As a result, user-space tools may provide inconsistent
channel info. For instance, consider the following two commands:
$ sudo iw dev wlan0 link
$ sudo iw dev wlan0 info
The latter command gets channel info from the hardware, so most probably
its output will be correct. However the former command gets channel info
from scan cache, so its output will contain outdated channel info.
In fact, current bss channel info will not be updated until the
next [re-]connect.

Note that mac80211 STAs have a workaround for this, but it requires
access to internal cfg80211 data, see ieee80211_chswitch_work:

	/* XXX: shouldn't really modify cfg80211-owned data! */
	ifmgd->associated->channel = sdata->csa_chandef.chan;

This patch suggests to convert mac80211 workaround into cfg80211 behavior
and to update current bss channel in cfg80211_ch_switch_notify.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c    | 3 ---
 net/wireless/nl80211.c | 5 +++++
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 3dbecae4be73c..2ac749c4a6b26 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1156,9 +1156,6 @@ static void ieee80211_chswitch_work(struct work_struct *work)
 		goto out;
 	}
 
-	/* XXX: shouldn't really modify cfg80211-owned data! */
-	ifmgd->associated->channel = sdata->csa_chandef.chan;
-
 	ifmgd->csa_waiting_bcn = true;
 
 	ieee80211_sta_reset_beacon_monitor(sdata);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 048e004ed0ee8..c6711ead5e591 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -15441,6 +15441,11 @@ void cfg80211_ch_switch_notify(struct net_device *dev,
 
 	wdev->chandef = *chandef;
 	wdev->preset_chandef = *chandef;
+
+	if (wdev->iftype == NL80211_IFTYPE_STATION &&
+	    !WARN_ON(!wdev->current_bss))
+		wdev->current_bss->pub.channel = chandef->chan;
+
 	nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL,
 				 NL80211_CMD_CH_SWITCH_NOTIFY, 0);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 058/244] mwifiex: prevent an array overflow

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit b4c35c17227fe437ded17ce683a6927845f8c4a4 ]

The "rate_index" is only used as an index into the phist_data->rx_rate[]
array in the mwifiex_hist_data_set() function.  That array has
MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some
debugfs information.  The "rate_index" variable comes from the network
skb->data[] and it is a u8 so it's in the 0-255 range.  We need to cap
it to prevent an array overflow.

Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfp.c b/drivers/net/wireless/marvell/mwifiex/cfp.c
index bfe84e55df776..f1522fb1c1e87 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfp.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfp.c
@@ -531,5 +531,8 @@ u8 mwifiex_adjust_data_rate(struct mwifiex_private *priv,
 		rate_index = (rx_rate > MWIFIEX_RATE_INDEX_OFDM0) ?
 			      rx_rate - 1 : rx_rate;
 
+	if (rate_index >= MWIFIEX_MAX_AC_RX_RATES)
+		rate_index = MWIFIEX_MAX_AC_RX_RATES - 1;
+
 	return rate_index;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 059/244] rsi: Fix NULL pointer dereference in kmalloc

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit d5414c2355b20ea8201156d2e874265f1cb0d775 ]

kmalloc can fail in rsi_register_rates_channels but memcpy still attempts
to write to channels. The patch replaces these calls with kmemdup and
passes the error upstream.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_mac80211.c | 30 ++++++++++++---------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
index 4e510cbe0a89f..be59d66585d6d 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -188,27 +188,27 @@ bool rsi_is_cipher_wep(struct rsi_common *common)
  * @adapter: Pointer to the adapter structure.
  * @band: Operating band to be set.
  *
- * Return: None.
+ * Return: int - 0 on success, negative error on failure.
  */
-static void rsi_register_rates_channels(struct rsi_hw *adapter, int band)
+static int rsi_register_rates_channels(struct rsi_hw *adapter, int band)
 {
 	struct ieee80211_supported_band *sbands = &adapter->sbands[band];
 	void *channels = NULL;
 
 	if (band == NL80211_BAND_2GHZ) {
-		channels = kmalloc(sizeof(rsi_2ghz_channels), GFP_KERNEL);
-		memcpy(channels,
-		       rsi_2ghz_channels,
-		       sizeof(rsi_2ghz_channels));
+		channels = kmemdup(rsi_2ghz_channels, sizeof(rsi_2ghz_channels),
+				   GFP_KERNEL);
+		if (!channels)
+			return -ENOMEM;
 		sbands->band = NL80211_BAND_2GHZ;
 		sbands->n_channels = ARRAY_SIZE(rsi_2ghz_channels);
 		sbands->bitrates = rsi_rates;
 		sbands->n_bitrates = ARRAY_SIZE(rsi_rates);
 	} else {
-		channels = kmalloc(sizeof(rsi_5ghz_channels), GFP_KERNEL);
-		memcpy(channels,
-		       rsi_5ghz_channels,
-		       sizeof(rsi_5ghz_channels));
+		channels = kmemdup(rsi_5ghz_channels, sizeof(rsi_5ghz_channels),
+				   GFP_KERNEL);
+		if (!channels)
+			return -ENOMEM;
 		sbands->band = NL80211_BAND_5GHZ;
 		sbands->n_channels = ARRAY_SIZE(rsi_5ghz_channels);
 		sbands->bitrates = &rsi_rates[4];
@@ -227,6 +227,7 @@ static void rsi_register_rates_channels(struct rsi_hw *adapter, int band)
 	sbands->ht_cap.mcs.rx_mask[0] = 0xff;
 	sbands->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
 	/* sbands->ht_cap.mcs.rx_highest = 0x82; */
+	return 0;
 }
 
 /**
@@ -1985,11 +1986,16 @@ int rsi_mac80211_attach(struct rsi_common *common)
 	wiphy->available_antennas_rx = 1;
 	wiphy->available_antennas_tx = 1;
 
-	rsi_register_rates_channels(adapter, NL80211_BAND_2GHZ);
+	status = rsi_register_rates_channels(adapter, NL80211_BAND_2GHZ);
+	if (status)
+		return status;
 	wiphy->bands[NL80211_BAND_2GHZ] =
 		&adapter->sbands[NL80211_BAND_2GHZ];
 	if (common->num_supp_bands > 1) {
-		rsi_register_rates_channels(adapter, NL80211_BAND_5GHZ);
+		status = rsi_register_rates_channels(adapter,
+						     NL80211_BAND_5GHZ);
+		if (status)
+			return status;
 		wiphy->bands[NL80211_BAND_5GHZ] =
 			&adapter->sbands[NL80211_BAND_5GHZ];
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 060/244] net: cw1200: fix a NULL pointer dereference

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 0ed2a005347400500a39ea7c7318f1fea57fb3ca ]

In case create_singlethread_workqueue fails, the fix free the
hardware and returns NULL to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/st/cw1200/main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/st/cw1200/main.c b/drivers/net/wireless/st/cw1200/main.c
index 90dc979f260b6..c1608f0bf6d01 100644
--- a/drivers/net/wireless/st/cw1200/main.c
+++ b/drivers/net/wireless/st/cw1200/main.c
@@ -345,6 +345,11 @@ static struct ieee80211_hw *cw1200_init_common(const u8 *macaddr,
 	mutex_init(&priv->wsm_cmd_mux);
 	mutex_init(&priv->conf_mutex);
 	priv->workqueue = create_singlethread_workqueue("cw1200_wq");
+	if (!priv->workqueue) {
+		ieee80211_free_hw(hw);
+		return NULL;
+	}
+
 	sema_init(&priv->scan.lock, 1);
 	INIT_WORK(&priv->scan.work, cw1200_scan_work);
 	INIT_DELAYED_WORK(&priv->scan.probe_work, cw1200_probe_work);
-- 
2.20.1

[PATCH AUTOSEL 4.19 061/244] at76c50x-usb: Don't register led_trigger if usb_register_driver failed

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 09ac2694b0475f96be895848687ebcbba97eeecf ]

Syzkaller report this:

[ 1213.468581] BUG: unable to handle kernel paging request at fffffbfff83bf338
[ 1213.469530] #PF error: [normal kernel read fault]
[ 1213.469530] PGD 237fe4067 P4D 237fe4067 PUD 237e60067 PMD 1c868b067 PTE 0
[ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI
[ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G         C        5.1.0-rc3+ #8
[ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1213.473514] RIP: 0010:strcmp+0x31/0xa0
[ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
[ 1213.473514] RSP: 0018:ffff8881f2b7f950 EFLAGS: 00010246
[ 1213.473514] RAX: 1ffffffff83bf338 RBX: ffff8881ea6f7240 RCX: ffffffff825350c6
[ 1213.473514] RDX: 0000000000000000 RSI: ffffffffc1ee19c0 RDI: ffffffffc1df99c0
[ 1213.473514] RBP: ffffffffc1df99c1 R08: 0000000000000001 R09: 0000000000000004
[ 1213.473514] R10: 0000000000000000 R11: ffff8881de353f00 R12: ffff8881ee727900
[ 1213.473514] R13: dffffc0000000000 R14: 0000000000000001 R15: ffffffffc1eeaaf0
[ 1213.473514] FS:  00007fa66fa01700(0000) GS:ffff8881f7200000(0000) knlGS:0000000000000000
[ 1213.473514] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1213.473514] CR2: fffffbfff83bf338 CR3: 00000001ebb9e005 CR4: 00000000007606f0
[ 1213.473514] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1213.473514] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1213.473514] PKRU: 55555554
[ 1213.473514] Call Trace:
[ 1213.473514]  led_trigger_register+0x112/0x3f0
[ 1213.473514]  led_trigger_register_simple+0x7a/0x110
[ 1213.473514]  ? 0xffffffffc1c10000
[ 1213.473514]  at76_mod_init+0x77/0x1000 [at76c50x_usb]
[ 1213.473514]  do_one_initcall+0xbc/0x47d
[ 1213.473514]  ? perf_trace_initcall_level+0x3a0/0x3a0
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  do_init_module+0x1b5/0x547
[ 1213.473514]  load_module+0x6405/0x8c10
[ 1213.473514]  ? module_frob_arch_sections+0x20/0x20
[ 1213.473514]  ? kernel_read_file+0x1e6/0x5d0
[ 1213.473514]  ? find_held_lock+0x32/0x1c0
[ 1213.473514]  ? cap_capable+0x1ae/0x210
[ 1213.473514]  ? __do_sys_finit_module+0x162/0x190
[ 1213.473514]  __do_sys_finit_module+0x162/0x190
[ 1213.473514]  ? __ia32_sys_init_module+0xa0/0xa0
[ 1213.473514]  ? __mutex_unlock_slowpath+0xdc/0x690
[ 1213.473514]  ? wait_for_completion+0x370/0x370
[ 1213.473514]  ? vfs_write+0x204/0x4a0
[ 1213.473514]  ? do_syscall_64+0x18/0x450
[ 1213.473514]  do_syscall_64+0x9f/0x450
[ 1213.473514]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1213.473514] RIP: 0033:0x462e99
[ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
[ 1213.473514] RSP: 002b:00007fa66fa00c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 1213.473514] RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
[ 1213.473514] RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
[ 1213.473514] RBP: 00007fa66fa00c70 R08: 0000000000000000 R09: 0000000000000000
[ 1213.473514] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa66fa016bc
[ 1213.473514] R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

If usb_register failed, no need to call led_trigger_register_simple.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1264b951463a ("at76c50x-usb: add driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/atmel/at76c50x-usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/atmel/at76c50x-usb.c b/drivers/net/wireless/atmel/at76c50x-usb.c
index e99e766a30285..1cabae424839e 100644
--- a/drivers/net/wireless/atmel/at76c50x-usb.c
+++ b/drivers/net/wireless/atmel/at76c50x-usb.c
@@ -2585,8 +2585,8 @@ static int __init at76_mod_init(void)
 	if (result < 0)
 		printk(KERN_ERR DRIVER_NAME
 		       ": usb_register failed (status %d)\n", result);
-
-	led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
+	else
+		led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
 	return result;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 064/244] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit b2c01aab9646ed8ffb7c549afe55d5349c482425 ]

Syzkaller report this:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468
Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d
RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952
RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030
RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed
R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000
R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000
FS:  00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 driver_remove_file+0x40/0x50 drivers/base/driver.c:122
 pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline]
 pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209
 ssb_modexit+0xa/0x1b [ssb]
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff
Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6
 [last unloaded: 3c59x]
Dumping ftrace buffer:
   (ftrace buffer empty)
---[ end trace 3913cbf8011e1c05 ]---

In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed,
however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver
unconditionally, which may tigger a NULL pointer dereference issue as above.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ssb/bridge_pcmcia_80211.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/ssb/bridge_pcmcia_80211.c b/drivers/ssb/bridge_pcmcia_80211.c
index f51f150307dfb..ffa379efff83c 100644
--- a/drivers/ssb/bridge_pcmcia_80211.c
+++ b/drivers/ssb/bridge_pcmcia_80211.c
@@ -113,16 +113,21 @@ static struct pcmcia_driver ssb_host_pcmcia_driver = {
 	.resume		= ssb_host_pcmcia_resume,
 };
 
+static int pcmcia_init_failed;
+
 /*
  * These are not module init/exit functions!
  * The module_pcmcia_driver() helper cannot be used here.
  */
 int ssb_host_pcmcia_init(void)
 {
-	return pcmcia_register_driver(&ssb_host_pcmcia_driver);
+	pcmcia_init_failed = pcmcia_register_driver(&ssb_host_pcmcia_driver);
+
+	return pcmcia_init_failed;
 }
 
 void ssb_host_pcmcia_exit(void)
 {
-	pcmcia_unregister_driver(&ssb_host_pcmcia_driver);
+	if (!pcmcia_init_failed)
+		pcmcia_unregister_driver(&ssb_host_pcmcia_driver);
 }
-- 
2.20.1