[PATCH AUTOSEL 4.19 06/60] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()

[PATCH AUTOSEL 4.19 06/60] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()

[Sasha Levin]

From: John Crispin <john@phrozen.org>

[ Upstream commit 25d16d124a5e249e947c0487678b61dcff25cf8b ]

The reported rate is not scaled down correctly. After applying this patch,
the function will behave just like the v/ht equivalents.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index aad1c8e858e5..d57e2f679a3e 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1219,7 +1219,7 @@ static u32 cfg80211_calculate_bitrate_he(struct rate_info *rate)
 	if (rate->he_dcm)
 		result /= 2;
 
-	return result;
+	return result / 10000;
 }
 
 u32 cfg80211_calculate_bitrate(struct rate_info *rate)
-- 
2.20.1

[PATCH AUTOSEL 4.19 11/60] mac80211: mesh: fix RCU warning

[Sasha Levin]

From: Thomas Pedersen <thomas@eero.com>

[ Upstream commit 551842446ed695641a00782cd118cbb064a416a1 ]

ifmsh->csa is an RCU-protected pointer. The writer context
in ieee80211_mesh_finish_csa() is already mutually
exclusive with wdev->sdata.mtx, but the RCU checker did
not know this. Use rcu_dereference_protected() to avoid a
warning.

fixes the following warning:

[   12.519089] =============================
[   12.520042] WARNING: suspicious RCU usage
[   12.520652] 5.1.0-rc7-wt+ #16 Tainted: G        W
[   12.521409] -----------------------------
[   12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage!
[   12.522928] other info that might help us debug this:
[   12.523984] rcu_scheduler_active = 2, debug_locks = 1
[   12.524855] 5 locks held by kworker/u8:2/152:
[   12.525438]  #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620
[   12.526607]  #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620
[   12.528001]  #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90
[   12.529116]  #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90
[   12.530233]  #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90

Signed-off-by: Thomas Pedersen <thomas@eero.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index d51da26e9c18..0f9446ab7e4f 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1212,7 +1212,8 @@ int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
 	ifmsh->chsw_ttl = 0;
 
 	/* Remove the CSA and MCSP elements from the beacon */
-	tmp_csa_settings = rcu_dereference(ifmsh->csa);
+	tmp_csa_settings = rcu_dereference_protected(ifmsh->csa,
+					    lockdep_is_held(&sdata->wdev.mtx));
 	RCU_INIT_POINTER(ifmsh->csa, NULL);
 	if (tmp_csa_settings)
 		kfree_rcu(tmp_csa_settings, rcu_head);
@@ -1234,6 +1235,8 @@ int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
 	struct mesh_csa_settings *tmp_csa_settings;
 	int ret = 0;
 
+	lockdep_assert_held(&sdata->wdev.mtx);
+
 	tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings),
 				   GFP_ATOMIC);
 	if (!tmp_csa_settings)
-- 
2.20.1

[PATCH AUTOSEL 4.19 12/60] mac80211: free peer keys before vif down in mesh

[Sasha Levin]

From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>

[ Upstream commit 0112fa557c3bb3a002bc85760dc3761d737264d3 ]

freeing peer keys after vif down is resulting in peer key uninstall
to fail due to interface lookup failure. so fix that.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 0f9446ab7e4f..3162f955f3ae 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -923,6 +923,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 
 	/* flush STAs and mpaths on this iface */
 	sta_info_flush(sdata);
+	ieee80211_free_keys(sdata, true);
 	mesh_path_flush_by_iface(sdata);
 
 	/* stop the beacon */
-- 
2.20.1

[PATCH AUTOSEL 4.19 13/60] mwifiex: Fix possible buffer overflows at parsing bss descriptor

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 13ec7f10b87f5fc04c4ccbd491c94c7980236a74 ]

mwifiex_update_bss_desc_with_ie() calls memcpy() unconditionally in
a couple places without checking the destination size.  Since the
source is given from user-space, this may trigger a heap buffer
overflow.

Fix it by putting the length check before performing memcpy().

This fix addresses CVE-2019-3846.

Reported-by: huangwen <huangwen@venustech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/scan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index 8e483b0bc3b1..ddf985fb93ab 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -1247,6 +1247,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 		}
 		switch (element_id) {
 		case WLAN_EID_SSID:
+			if (element_len > IEEE80211_MAX_SSID_LEN)
+				return -EINVAL;
 			bss_entry->ssid.ssid_len = element_len;
 			memcpy(bss_entry->ssid.ssid, (current_ptr + 2),
 			       element_len);
@@ -1256,6 +1258,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_SUPP_RATES:
+			if (element_len > MWIFIEX_SUPPORTED_RATES)
+				return -EINVAL;
 			memcpy(bss_entry->data_rates, current_ptr + 2,
 			       element_len);
 			memcpy(bss_entry->supported_rates, current_ptr + 2,
-- 
2.20.1

[PATCH AUTOSEL 4.19 14/60] mwifiex: Abort at too short BSS descriptor element

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 685c9b7750bfacd6fc1db50d86579980593b7869 ]

Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that
the source descriptor entries contain the enough size for each type
and performs copying without checking the source size.  This may lead
to read over boundary.

Fix this by putting the source size check in appropriate places.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/scan.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index ddf985fb93ab..80136153a8e8 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -1269,6 +1269,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_FH_PARAMS:
+			if (element_len + 2 < sizeof(*fh_param_set))
+				return -EINVAL;
 			fh_param_set =
 				(struct ieee_types_fh_param_set *) current_ptr;
 			memcpy(&bss_entry->phy_param_set.fh_param_set,
@@ -1277,6 +1279,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_DS_PARAMS:
+			if (element_len + 2 < sizeof(*ds_param_set))
+				return -EINVAL;
 			ds_param_set =
 				(struct ieee_types_ds_param_set *) current_ptr;
 
@@ -1288,6 +1292,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_CF_PARAMS:
+			if (element_len + 2 < sizeof(*cf_param_set))
+				return -EINVAL;
 			cf_param_set =
 				(struct ieee_types_cf_param_set *) current_ptr;
 			memcpy(&bss_entry->ss_param_set.cf_param_set,
@@ -1296,6 +1302,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_IBSS_PARAMS:
+			if (element_len + 2 < sizeof(*ibss_param_set))
+				return -EINVAL;
 			ibss_param_set =
 				(struct ieee_types_ibss_param_set *)
 				current_ptr;
@@ -1305,10 +1313,14 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_ERP_INFO:
+			if (!element_len)
+				return -EINVAL;
 			bss_entry->erp_flags = *(current_ptr + 2);
 			break;
 
 		case WLAN_EID_PWR_CONSTRAINT:
+			if (!element_len)
+				return -EINVAL;
 			bss_entry->local_constraint = *(current_ptr + 2);
 			bss_entry->sensed_11h = true;
 			break;
@@ -1349,6 +1361,9 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_VENDOR_SPECIFIC:
+			if (element_len + 2 < sizeof(vendor_ie->vend_hdr))
+				return -EINVAL;
+
 			vendor_ie = (struct ieee_types_vendor_specific *)
 					current_ptr;
 
-- 
2.20.1

Re: [PATCH AUTOSEL 4.19 14/60] mwifiex: Abort at too short BSS descriptor element

[Brian Norris]

On Wed, Jun 26, 2019 at 5:49 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Takashi Iwai <tiwai@suse.de>
>
> [ Upstream commit 685c9b7750bfacd6fc1db50d86579980593b7869 ]
>
> Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that
> the source descriptor entries contain the enough size for each type
> and performs copying without checking the source size.  This may lead
> to read over boundary.
>
> Fix this by putting the source size check in appropriate places.
>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

For the record, this fixup is still aiming for 5.2, correcting some
potential mistakes in this patch:

63d7ef36103d mwifiex: Don't abort on small, spec-compliant vendor IEs

So you might want to hold off a bit, and grab them both.

Brian

Re: [PATCH AUTOSEL 4.19 14/60] mwifiex: Abort at too short BSS descriptor element

[Sasha Levin]

On Fri, Jun 28, 2019 at 03:58:49PM -0700, Brian Norris wrote:
>On Wed, Jun 26, 2019 at 5:49 PM Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Takashi Iwai <tiwai@suse.de>
>>
>> [ Upstream commit 685c9b7750bfacd6fc1db50d86579980593b7869 ]
>>
>> Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that
>> the source descriptor entries contain the enough size for each type
>> and performs copying without checking the source size.  This may lead
>> to read over boundary.
>>
>> Fix this by putting the source size check in appropriate places.
>>
>> Signed-off-by: Takashi Iwai <tiwai@suse.de>
>> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>For the record, this fixup is still aiming for 5.2, correcting some
>potential mistakes in this patch:
>
>63d7ef36103d mwifiex: Don't abort on small, spec-compliant vendor IEs
>
>So you might want to hold off a bit, and grab them both.

I see that 63d7ef36103d didn't make it into 5.2, so I'll just drop this
for now.

--
Thanks,
Sasha

Re: [PATCH AUTOSEL 4.19 14/60] mwifiex: Abort at too short BSS descriptor element

[Brian Norris]

On Wed, Jul 10, 2019 at 7:51 AM Sasha Levin <sashal@kernel.org> wrote:
> I see that 63d7ef36103d didn't make it into 5.2, so I'll just drop this
> for now.

Yeah, I think it's stuck at net/master. Presumably it'll get into
5.3-rc somewhere.

Brian

[PATCH AUTOSEL 4.19 15/60] iwlwifi: Fix double-free problems in iwl_req_fw_callback()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit a8627176b0de7ba3f4524f641ddff4abf23ae4e4 ]

In the error handling code of iwl_req_fw_callback(), iwl_dealloc_ucode()
is called to free data. In iwl_drv_stop(), iwl_dealloc_ucode() is called
again, which can cause double-free problems.

To fix this bug, the call to iwl_dealloc_ucode() in
iwl_req_fw_callback() is deleted.

This bug is found by a runtime fuzzing tool named FIZZER written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index c0631255aee7..db6628d390a2 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1547,7 +1547,6 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	goto free;
 
  out_free_fw:
-	iwl_dealloc_ucode(drv);
 	release_firmware(ucode_raw);
  out_unbind:
 	complete(&drv->request_firmware_complete);
-- 
2.20.1

[PATCH AUTOSEL 4.19 16/60] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 69ae4f6aac1578575126319d3f55550e7e440449 ]

A few places in mwifiex_uap_parse_tail_ies() perform memcpy()
unconditionally, which may lead to either buffer overflow or read over
boundary.

This patch addresses the issues by checking the read size and the
destination size at each place more properly.  Along with the fixes,
the patch cleans up the code slightly by introducing a temporary
variable for the token size, and unifies the error path with the
standard goto statement.

Reported-by: huangwen <huangwen@venustech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/ie.c | 47 +++++++++++++++--------
 1 file changed, 31 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/ie.c b/drivers/net/wireless/marvell/mwifiex/ie.c
index 75cbd609d606..801a2d7b020a 100644
--- a/drivers/net/wireless/marvell/mwifiex/ie.c
+++ b/drivers/net/wireless/marvell/mwifiex/ie.c
@@ -329,6 +329,8 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 	struct ieee80211_vendor_ie *vendorhdr;
 	u16 gen_idx = MWIFIEX_AUTO_IDX_MASK, ie_len = 0;
 	int left_len, parsed_len = 0;
+	unsigned int token_len;
+	int err = 0;
 
 	if (!info->tail || !info->tail_len)
 		return 0;
@@ -344,6 +346,12 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 	 */
 	while (left_len > sizeof(struct ieee_types_header)) {
 		hdr = (void *)(info->tail + parsed_len);
+		token_len = hdr->len + sizeof(struct ieee_types_header);
+		if (token_len > left_len) {
+			err = -EINVAL;
+			goto out;
+		}
+
 		switch (hdr->element_id) {
 		case WLAN_EID_SSID:
 		case WLAN_EID_SUPP_RATES:
@@ -361,16 +369,19 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 			if (cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
 						    WLAN_OUI_TYPE_MICROSOFT_WMM,
 						    (const u8 *)hdr,
-						    hdr->len + sizeof(struct ieee_types_header)))
+						    token_len))
 				break;
 		default:
-			memcpy(gen_ie->ie_buffer + ie_len, hdr,
-			       hdr->len + sizeof(struct ieee_types_header));
-			ie_len += hdr->len + sizeof(struct ieee_types_header);
+			if (ie_len + token_len > IEEE_MAX_IE_SIZE) {
+				err = -EINVAL;
+				goto out;
+			}
+			memcpy(gen_ie->ie_buffer + ie_len, hdr, token_len);
+			ie_len += token_len;
 			break;
 		}
-		left_len -= hdr->len + sizeof(struct ieee_types_header);
-		parsed_len += hdr->len + sizeof(struct ieee_types_header);
+		left_len -= token_len;
+		parsed_len += token_len;
 	}
 
 	/* parse only WPA vendor IE from tail, WMM IE is configured by
@@ -380,15 +391,17 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 						    WLAN_OUI_TYPE_MICROSOFT_WPA,
 						    info->tail, info->tail_len);
 	if (vendorhdr) {
-		memcpy(gen_ie->ie_buffer + ie_len, vendorhdr,
-		       vendorhdr->len + sizeof(struct ieee_types_header));
-		ie_len += vendorhdr->len + sizeof(struct ieee_types_header);
+		token_len = vendorhdr->len + sizeof(struct ieee_types_header);
+		if (ie_len + token_len > IEEE_MAX_IE_SIZE) {
+			err = -EINVAL;
+			goto out;
+		}
+		memcpy(gen_ie->ie_buffer + ie_len, vendorhdr, token_len);
+		ie_len += token_len;
 	}
 
-	if (!ie_len) {
-		kfree(gen_ie);
-		return 0;
-	}
+	if (!ie_len)
+		goto out;
 
 	gen_ie->ie_index = cpu_to_le16(gen_idx);
 	gen_ie->mgmt_subtype_mask = cpu_to_le16(MGMT_MASK_BEACON |
@@ -398,13 +411,15 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 
 	if (mwifiex_update_uap_custom_ie(priv, gen_ie, &gen_idx, NULL, NULL,
 					 NULL, NULL)) {
-		kfree(gen_ie);
-		return -1;
+		err = -EINVAL;
+		goto out;
 	}
 
 	priv->gen_idx = gen_idx;
+
+ out:
 	kfree(gen_ie);
-	return 0;
+	return err;
 }
 
 /* This function parses different IEs-head & tail IEs, beacon IEs,
-- 
2.20.1

[PATCH AUTOSEL 4.19 40/60] mac80211: only warn once on chanctx_conf being NULL

[Sasha Levin]

From: Yibo Zhao <yiboz@codeaurora.org>

[ Upstream commit 563572340173865a9a356e6bb02579e6998a876d ]

In multiple SSID cases, it takes time to prepare every AP interface
to be ready in initializing phase. If a sta already knows everything it
needs to join one of the APs and sends authentication to the AP which
is not fully prepared at this point of time, AP's channel context
could be NULL. As a result, warning message occurs.

Even worse, if the AP is under attack via tools such as MDK3 and massive
authentication requests are received in a very short time, console will
be hung due to kernel warning messages.

WARN_ON_ONCE() could be a better way for indicating warning messages
without duplicate messages to flood the console.

Johannes: We still need to address the underlying problem, but we
          don't really have a good handle on it yet. Suppress the
          worst side-effects for now.

Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Yibo Zhao <yiboz@codeaurora.org>
[johannes: add note, change subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 172aeae21ae9..6ea64cadad00 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1410,7 +1410,7 @@ ieee80211_get_sband(struct ieee80211_sub_if_data *sdata)
 	rcu_read_lock();
 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 
-	if (WARN_ON(!chanctx_conf)) {
+	if (WARN_ON_ONCE(!chanctx_conf)) {
 		rcu_read_unlock();
 		return NULL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 41/60] mac80211: do not start any work during reconfigure flow

[Sasha Levin]

From: Naftali Goldstein <naftali.goldstein@intel.com>

[ Upstream commit f8891461a277ec0afc493fd30cd975a38048a038 ]

It is not a good idea to try to perform any work (e.g. send an auth
frame) during reconfigure flow.

Prevent this from happening, and at the end of the reconfigure flow
requeue all the works.

Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h | 7 +++++++
 net/mac80211/util.c        | 4 ++++
 2 files changed, 11 insertions(+)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6ea64cadad00..ae9cce2d41da 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1998,6 +1998,13 @@ void __ieee80211_flush_queues(struct ieee80211_local *local,
 
 static inline bool ieee80211_can_run_worker(struct ieee80211_local *local)
 {
+	/*
+	 * It's unsafe to try to do any work during reconfigure flow.
+	 * When the flow ends the work will be requeued.
+	 */
+	if (local->in_reconfig)
+		return false;
+
 	/*
 	 * If quiescing is set, we are racing with __ieee80211_suspend.
 	 * __ieee80211_suspend flushes the workers after setting quiescing,
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 3deaa01ebee4..f60e033f68c9 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2224,6 +2224,10 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		mutex_lock(&local->mtx);
 		ieee80211_start_next_roc(local);
 		mutex_unlock(&local->mtx);
+
+		/* Requeue all works */
+		list_for_each_entry(sdata, &local->interfaces, list)
+			ieee80211_queue_work(&local->hw, &sdata->work);
 	}
 
 	ieee80211_wake_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
-- 
2.20.1