From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 5/8] mt76: do not set NEEDS_UNIQUE_STA_ADDR for 7615 and 7915
Date: Sun, 27 Sep 2020 19:18:49 +0200 [thread overview]
Message-ID: <20200927171852.48669-5-nbd@nbd.name> (raw)
In-Reply-To: <20200927171852.48669-1-nbd@nbd.name>
The newer chipsets can deal with the same STA on multiple interfaces
Preparation for supporting more station interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
drivers/net/wireless/mediatek/mt76/mac80211.c | 1 -
drivers/net/wireless/mediatek/mt76/mt7603/init.c | 1 +
drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 1 +
3 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mac80211.c b/drivers/net/wireless/mediatek/mt76/mac80211.c
index 4e0ed9c79d50..a778ecc65261 100644
--- a/drivers/net/wireless/mediatek/mt76/mac80211.c
+++ b/drivers/net/wireless/mediatek/mt76/mac80211.c
@@ -314,7 +314,6 @@ mt76_phy_init(struct mt76_dev *dev, struct ieee80211_hw *hw)
ieee80211_hw_set(hw, MFP_CAPABLE);
ieee80211_hw_set(hw, AP_LINK_PS);
ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
- ieee80211_hw_set(hw, NEEDS_UNIQUE_STA_ADDR);
wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
wiphy->interface_modes =
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/init.c b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
index c4848fafd270..619a97a8ea21 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
@@ -557,6 +557,7 @@ int mt7603_register_device(struct mt7603_dev *dev)
ieee80211_hw_set(hw, TX_STATUS_NO_AMPDU_LEN);
ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING);
+ ieee80211_hw_set(hw, NEEDS_UNIQUE_STA_ADDR);
/* init led callbacks */
if (IS_ENABLED(CONFIG_MT76_LEDS)) {
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index 11b769af2f8f..ea31650a01b8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -186,6 +186,7 @@ void mt76x02_init_device(struct mt76x02_dev *dev)
ieee80211_hw_set(hw, SUPPORTS_HT_CCK_RATES);
ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING);
+ ieee80211_hw_set(hw, NEEDS_UNIQUE_STA_ADDR);
dev->mt76.global_wcid.idx = 255;
dev->mt76.global_wcid.hw_key_idx = -1;
--
2.28.0
next prev parent reply other threads:[~2020-09-27 17:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-27 17:18 [PATCH 1/8] mt76: mt7915: add 802.11 encap offload support Felix Fietkau
2020-09-27 17:18 ` [PATCH 2/8] mt76: mt7915: add encap offload for 4-address mode stations Felix Fietkau
2020-09-27 17:18 ` [PATCH 3/8] mt76: use ieee80211_rx_list to pass frames to the network stack as a batch Felix Fietkau
2020-09-27 17:18 ` [PATCH 4/8] mt76: mt7615: add debugfs knob for setting extended local mac addresses Felix Fietkau
2020-09-27 17:18 ` Felix Fietkau [this message]
2020-09-27 17:18 ` [PATCH 6/8] mt76: mt7915: support 32 station interfaces Felix Fietkau
2020-09-27 17:18 ` [PATCH 7/8] mt76: mt7915: fix processing txfree events Felix Fietkau
2020-09-27 17:18 ` [PATCH 8/8] mt76: mt7915: use napi_consume_skb to bulk-free tx skbs Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200927171852.48669-5-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox