[PATCH 1/2] mt76: mt7915: fix key set/delete issue

[PATCH 1/2] mt76: mt7915: fix key set/delete issue

[Felix Fietkau]

Deleting a key with the previous key index deletes the current key
Rework the code to better keep track of multiple keys and check for the
key index before deleting the current key

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../net/wireless/mediatek/mt76/mt7915/main.c  | 25 +++++++++++++------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index cde8c1ce3ae0..b32a435688bc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -346,7 +346,9 @@ static int mt7915_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	struct mt7915_sta *msta = sta ? (struct mt7915_sta *)sta->drv_priv :
 				  &mvif->sta;
 	struct mt76_wcid *wcid = &msta->wcid;
+	u8 *wcid_keyidx = &wcid->hw_key_idx;
 	int idx = key->keyidx;
+	int err = 0;
 
 	/* The hardware does not support per-STA RX GTK, fallback
 	 * to software mode for these.
@@ -361,6 +363,7 @@ static int mt7915_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	/* fall back to sw encryption for unsupported ciphers */
 	switch (key->cipher) {
 	case WLAN_CIPHER_SUITE_AES_CMAC:
+		wcid_keyidx = &wcid->hw_key_idx2;
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIE;
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
@@ -376,16 +379,24 @@ static int mt7915_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		return -EOPNOTSUPP;
 	}
 
-	if (cmd == SET_KEY) {
-		key->hw_key_idx = wcid->idx;
-		wcid->hw_key_idx = idx;
-	} else if (idx == wcid->hw_key_idx) {
-		wcid->hw_key_idx = -1;
-	}
+	mutex_lock(&dev->mt76.mutex);
+
+	if (cmd == SET_KEY)
+		*wcid_keyidx = idx;
+	else if (idx == *wcid_keyidx)
+		*wcid_keyidx = -1;
+	else
+		goto out;
+
 	mt76_wcid_key_setup(&dev->mt76, wcid,
 			    cmd == SET_KEY ? key : NULL);
 
-	return mt7915_mcu_add_key(dev, vif, msta, key, cmd);
+	err = mt7915_mcu_add_key(dev, vif, msta, key, cmd);
+
+out:
+	mutex_unlock(&dev->mt76.mutex);
+
+	return err;
 }
 
 static int mt7915_config(struct ieee80211_hw *hw, u32 changed)
-- 
2.30.1

[PATCH 2/2] mt76: mt7915: refresh repeater entry MAC address when setting BSSID

[Felix Fietkau]

When disassociating and clearing the BSSID of a repeater entry used by a client
mode interface, the corresponding MAC address entry can get lost too, causing
the client interface to not be able to associate anymore.
Fix this by also refreshing the MAC address when setting the BSSID

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 29b5039cc286..9d0911ac1d90 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1008,8 +1008,10 @@ int mt7915_mcu_add_bss_info(struct mt7915_phy *phy,
 	struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
 	struct sk_buff *skb;
 
-	if (mvif->omac_idx >= REPEATER_BSSID_START)
+	if (mvif->omac_idx >= REPEATER_BSSID_START) {
+		mt7915_mcu_muar_config(phy, vif, false, enable);
 		mt7915_mcu_muar_config(phy, vif, true, enable);
+	}
 
 	skb = mt7915_mcu_alloc_sta_req(phy->dev, mvif, NULL,
 				       MT7915_BSS_UPDATE_MAX_SIZE);
-- 
2.30.1