Linux wireless drivers development
 help / color / mirror / Atom feed
From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Cc: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Subject: [PATCH v2 16/24] wifi: mt76: mt7915: add dummy HW offload of IEEE 802.11 fragmentation
Date: Tue, 27 Aug 2024 11:30:03 +0200	[thread overview]
Message-ID: <20240827093011.18621-16-nbd@nbd.name> (raw)
In-Reply-To: <20240827093011.18621-1-nbd@nbd.name>

From: Benjamin Lin <benjamin-jw.lin@mediatek.com>

Currently, CONNAC2 series do not support encryption for fragmented Tx frames.
Therefore, add dummy function mt7915_set_frag_threshold() to prevent SW
IEEE 802.11 fragmentation.

Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/mediatek/mt76/mt7915/init.c | 1 +
 drivers/net/wireless/mediatek/mt76/mt7915/main.c | 7 +++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index a978f434dc5e..511e0d04eb95 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -398,6 +398,7 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
 	ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD);
 	ieee80211_hw_set(hw, SUPPORTS_MULTI_BSSID);
 	ieee80211_hw_set(hw, WANT_MONITOR_VIF);
+	ieee80211_hw_set(hw, SUPPORTS_TX_FRAG);
 
 	hw->max_tx_fragments = 4;
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 9bf308429db3..e80db20035ab 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -1594,6 +1594,12 @@ mt7915_twt_teardown_request(struct ieee80211_hw *hw,
 	mutex_unlock(&dev->mt76.mutex);
 }
 
+static int
+mt7915_set_frag_threshold(struct ieee80211_hw *hw, u32 val)
+{
+	return 0;
+}
+
 static int
 mt7915_set_radar_background(struct ieee80211_hw *hw,
 			    struct cfg80211_chan_def *chandef)
@@ -1723,6 +1729,7 @@ const struct ieee80211_ops mt7915_ops = {
 	.sta_set_decap_offload = mt7915_sta_set_decap_offload,
 	.add_twt_setup = mt7915_mac_add_twt_setup,
 	.twt_teardown_request = mt7915_twt_teardown_request,
+	.set_frag_threshold = mt7915_set_frag_threshold,
 	CFG80211_TESTMODE_CMD(mt76_testmode_cmd)
 	CFG80211_TESTMODE_DUMP(mt76_testmode_dump)
 #ifdef CONFIG_MAC80211_DEBUGFS
-- 
2.46.0


  parent reply	other threads:[~2024-08-27  9:55 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-27  9:29 [PATCH v2 01/24] mt76: mt7603: fix mixed declarations and code Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 02/24] wifi: mt76: mt7603: fix reading target power from eeprom Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 03/24] wifi: mt76: mt7603: initialize chainmask Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 04/24] wifi: mt76: fix mt76_get_rate Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 05/24] wifi: mt76: partially move channel change code to core Felix Fietkau
2024-08-27 18:02   ` Shiji Yang
2024-08-27 18:37     ` Felix Fietkau
2024-08-28  1:32       ` Shiji Yang
2024-08-28  6:34   ` [PATCH v3 " Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 06/24] wifi: mt76: add separate tx scheduling queue for off-channel tx Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 07/24] wifi: mt76: mt7915: disable tx worker during tx BA session enable/disable Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 08/24] wifi: mt76: mt7915: allocate vif wcid in the same range as stations Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 09/24] wifi: mt76: connac: add support for IEEE 802.11 fragmentation Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 10/24] wifi: mt76: connac: add support for passing connection state directly Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 11/24] wifi: mt76: change .sta_assoc callback to .sta_event Felix Fietkau
2024-08-27  9:29 ` [PATCH v2 12/24] wifi: mt76: mt7915: use mac80211 .sta_state op Felix Fietkau
2024-08-27  9:30 ` [PATCH v2 13/24] wifi: mt76: mt7915: set MT76_MCU_RESET early in mt7915_mac_full_reset Felix Fietkau
2024-08-27  9:30 ` [PATCH v2 14/24] wifi: mt76: mt7915: retry mcu messages Felix Fietkau
2024-09-13 19:32   ` Nícolas F. R. A. Prado
2024-09-17 10:22     ` Kalle Valo
2024-08-27  9:30 ` [PATCH v2 15/24] wifi: mt76: mt7915: reset the device after MCU timeout Felix Fietkau
2024-08-27  9:30 ` Felix Fietkau [this message]
2024-08-27  9:30 ` [PATCH v2 17/24] wifi: mt76: mt7915: hold dev->mt76.mutex while disabling tx worker Felix Fietkau
2024-08-27  9:30 ` [PATCH v2 18/24] wifi: mt76: connac: move mt7615_mcu_del_wtbl_all to connac Felix Fietkau
2024-08-27  9:30 ` [PATCH v2 19/24] wifi: mt76: mt7915: improve hardware restart reliability Felix Fietkau
2024-08-27  9:30 ` [PATCH v2 20/24] mt76: shrink mt76_queue_buf Felix Fietkau
2024-08-27  9:30 ` [PATCH v2 21/24] wifi: mt76: mt7915: fix rx filter setting for bfee functionality Felix Fietkau
2024-08-27  9:30 ` [PATCH v2 22/24] wifi: mt76: mt7915: always query station rx rate from firmware Felix Fietkau
2024-08-27  9:30 ` [PATCH v2 23/24] wifi: mt76: mt7996: fix uninitialized TLV data Felix Fietkau
2024-08-27  9:30 ` [PATCH v2 24/24] wifi: mt76: mt7915: avoid long MCU command timeouts during SER Felix Fietkau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240827093011.18621-16-nbd@nbd.name \
    --to=nbd@nbd.name \
    --cc=benjamin-jw.lin@mediatek.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox