From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH v2 24/24] wifi: mt76: mt7915: avoid long MCU command timeouts during SER
Date: Tue, 27 Aug 2024 11:30:11 +0200 [thread overview]
Message-ID: <20240827093011.18621-24-nbd@nbd.name> (raw)
In-Reply-To: <20240827093011.18621-1-nbd@nbd.name>
Immediately abort MCU commands when firmware requests DMA restart.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 54974ff72a5b..cf77ce0c8759 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1696,6 +1696,11 @@ void mt7915_reset(struct mt7915_dev *dev)
return;
}
+ if ((READ_ONCE(dev->recovery.state) & MT_MCU_CMD_STOP_DMA)) {
+ set_bit(MT76_MCU_RESET, &dev->mphy.state);
+ wake_up(&dev->mt76.mcu.wait);
+ }
+
queue_work(dev->mt76.wq, &dev->reset_work);
wake_up(&dev->reset_wait);
}
--
2.46.0
prev parent reply other threads:[~2024-08-27 9:55 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-27 9:29 [PATCH v2 01/24] mt76: mt7603: fix mixed declarations and code Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 02/24] wifi: mt76: mt7603: fix reading target power from eeprom Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 03/24] wifi: mt76: mt7603: initialize chainmask Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 04/24] wifi: mt76: fix mt76_get_rate Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 05/24] wifi: mt76: partially move channel change code to core Felix Fietkau
2024-08-27 18:02 ` Shiji Yang
2024-08-27 18:37 ` Felix Fietkau
2024-08-28 1:32 ` Shiji Yang
2024-08-28 6:34 ` [PATCH v3 " Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 06/24] wifi: mt76: add separate tx scheduling queue for off-channel tx Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 07/24] wifi: mt76: mt7915: disable tx worker during tx BA session enable/disable Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 08/24] wifi: mt76: mt7915: allocate vif wcid in the same range as stations Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 09/24] wifi: mt76: connac: add support for IEEE 802.11 fragmentation Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 10/24] wifi: mt76: connac: add support for passing connection state directly Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 11/24] wifi: mt76: change .sta_assoc callback to .sta_event Felix Fietkau
2024-08-27 9:29 ` [PATCH v2 12/24] wifi: mt76: mt7915: use mac80211 .sta_state op Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 13/24] wifi: mt76: mt7915: set MT76_MCU_RESET early in mt7915_mac_full_reset Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 14/24] wifi: mt76: mt7915: retry mcu messages Felix Fietkau
2024-09-13 19:32 ` Nícolas F. R. A. Prado
2024-09-17 10:22 ` Kalle Valo
2024-08-27 9:30 ` [PATCH v2 15/24] wifi: mt76: mt7915: reset the device after MCU timeout Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 16/24] wifi: mt76: mt7915: add dummy HW offload of IEEE 802.11 fragmentation Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 17/24] wifi: mt76: mt7915: hold dev->mt76.mutex while disabling tx worker Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 18/24] wifi: mt76: connac: move mt7615_mcu_del_wtbl_all to connac Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 19/24] wifi: mt76: mt7915: improve hardware restart reliability Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 20/24] mt76: shrink mt76_queue_buf Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 21/24] wifi: mt76: mt7915: fix rx filter setting for bfee functionality Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 22/24] wifi: mt76: mt7915: always query station rx rate from firmware Felix Fietkau
2024-08-27 9:30 ` [PATCH v2 23/24] wifi: mt76: mt7996: fix uninitialized TLV data Felix Fietkau
2024-08-27 9:30 ` Felix Fietkau [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240827093011.18621-24-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox