[PATCH 0/3] [v5 net-next] wireless: p54 devicetree conversion

[PATCH 0/3] [v5 net-next] wireless: p54 devicetree conversion

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

This is an older patch of mine that I lost track of. We already decided
a while ago that the OMAP2 platform should probably be removed entirely,
and this is the only known user, but it's probably a good idea to still
get the driver changes in, in case there are other out-of-tree users.

We probably don't have to worry about bisectability any more though,
so the devicetree and driver changes can just get merged independently
through the OMAP and wireless trees, respectively.

     Arnd

---

v4 Link: https://lore.kernel.org/all/20260430081242.3686993-1-arnd@kernel.org/
v3 Link: https://lore.kernel.org/all/20260427142355.2532714-1-arnd@kernel.org/
v2 Link: https://lore.kernel.org/all/20230404082401.1087835-1-arnd@kernel.org/

Cc: "Aaro Koskinen" <aaro.koskinen@iki.fi>
Cc: "Andreas Kemnade" <andreas@kemnade.info>
Cc: "Arnd Bergmann" <arnd@arndb.de>
Cc: "Bartosz Golaszewski" <brgl@kernel.org>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Dmitry Torokhov" <dmitry.torokhov@gmail.com>
Cc: "Eric Dumazet" <edumazet@google.com>
Cc: "Felipe Balbi" <balbi@kernel.org>
Cc: "Jakub Kicinski" <kuba@kernel.org>
Cc: "Johannes Berg" <johannes@sipsolutions.net>
Cc: "Kevin Hilman" <khilman@baylibre.com>
Cc: "Krzysztof Kozlowski" <krzk+dt@kernel.org>
Cc: "Linus Walleij" <linusw@kernel.org>
Cc: "Paolo Abeni" <pabeni@redhat.com>
Cc: "Rob Herring" <robh+dt@kernel.org>
Cc: "Roger Quadros" <rogerq@kernel.org>
Cc: "Tony Lindgren" <tony@atomide.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-omap@vger.kernel.org



Arnd Bergmann (3):
  [v5 net-next] dt-bindings: net: add st,stlc4560/p54spi binding
  [v5 net-next] p54spi: convert to devicetree
  [v5 omap] ARM: dts: omap2: add stlc4560 spi-wireless node

 .../bindings/net/wireless/st,stlc4560.yaml    | 61 +++++++++++++++++
 MAINTAINERS                                   |  1 +
 arch/arm/boot/dts/ti/omap/omap2.dtsi          |  4 ++
 .../dts/ti/omap/omap2420-n8x0-common.dtsi     | 12 ++++
 arch/arm/mach-omap2/board-n8x0.c              | 18 -----
 drivers/net/wireless/intersil/p54/p54spi.c    | 67 +++++++------------
 drivers/net/wireless/intersil/p54/p54spi.h    |  3 +
 7 files changed, 104 insertions(+), 62 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml

-- 
2.39.5

[PATCH 1/3] [v5 net-next] dt-bindings: net: add st,stlc4560/p54spi binding

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

The SPI version of Prism54 was sold under a couple of different
names and supported by the Linux p54spi driver, but there was
never a DT binding for it.

Document the four known names of this device and the properties
that are sufficient for its use on the Nokia N8x0 tablet.

As I don't have this hardware or documentation for it, this is
purely based on existing usage in the driver.

Link: https://lore.kernel.org/all/e8dc9acb-6f85-e0a9-a145-d101ca6da201@gmail.com/
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v5: fix name in MAINTAINERS file
v4: renamed file to st,stlc4560, matching the primary compatible string
    require st,stlc4560 string
---
 .../bindings/net/wireless/st,stlc4560.yaml    | 61 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml

diff --git a/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml b/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml
new file mode 100644
index 000000000000..a32265c07350
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/st,stlc4560.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST/Intersil/Conexant stlc45xx/p54spi/cx3110x SPI wireless device
+
+maintainers:
+  - Christian Lamparter <chunkeey@gmail.com>
+
+description:
+  The SPI variant of the Intersil Prism54 wireless device was sold
+  under a variety of names, including Conexant CX3110x and
+  ST Microelectronics STLC5460.
+
+allOf:
+  - $ref: ieee80211.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: st,stlc4560
+      - items:
+          - enum:
+              - cnxt,3110x
+              - isil,p54spi
+              - st,stlc4550
+          - const: st,stlc4560
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@0 {
+            compatible = "st,stlc4560";
+            reg = <0>;
+            spi-max-frequency = <48000000>;
+            interrupts-extended = <&gpio 23>;
+            powerdown-gpios = <&gpio 1>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 21c0ef0b9ce5..7defcc6e2072 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20142,6 +20142,7 @@ M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/p54
+F:	Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml
 F:	drivers/net/wireless/intersil/
 
 PACKET SOCKETS
-- 
2.39.5

Re: [PATCH 1/3] [v5 net-next] dt-bindings: net: add st,stlc4560/p54spi binding

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 766 bytes --]

On Thu, May 07, 2026 at 11:24:49PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The SPI version of Prism54 was sold under a couple of different
> names and supported by the Linux p54spi driver, but there was
> never a DT binding for it.
> 
> Document the four known names of this device and the properties
> that are sufficient for its use on the Nokia N8x0 tablet.
> 
> As I don't have this hardware or documentation for it, this is
> purely based on existing usage in the driver.
> 
> Link: https://lore.kernel.org/all/e8dc9acb-6f85-e0a9-a145-d101ca6da201@gmail.com/
> Acked-by: Christian Lamparter <chunkeey@gmail.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH 2/3] [v5 net-next] p54spi: convert to devicetree

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

The Prism54 SPI driver hardcodes GPIO numbers and expects users to
pass them as module parameters, apparently a relic from its life as a
staging driver. This works because there is only one user, the Nokia
N8x0 tablet.

Convert this to the gpio descriptor interface and DT based probing
to improve this and simplify the code at the same time.

Acked-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v5:
 - fix irq assignment # https://sashiko.dev/#/patchset/20260430081242.3686993-1-arnd%40kernel.org

v4:
 - make gpio line optional again
 - fix EPROBE_DEFER handling
 - match only st,stlc4560 compatible value, with binding change

v3:
 - rebase an older patch
---
 arch/arm/mach-omap2/board-n8x0.c           | 18 ------
 drivers/net/wireless/intersil/p54/p54spi.c | 67 ++++++++--------------
 drivers/net/wireless/intersil/p54/p54spi.h |  3 +
 3 files changed, 26 insertions(+), 62 deletions(-)

diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 969265d5d5c6..d9acd32c5457 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -20,7 +20,6 @@
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
 #include <linux/mmc/host.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/mmc-omap.h>
 #include <linux/mfd/menelaus.h>
 
@@ -106,21 +105,6 @@ static void __init n8x0_usb_init(void) {}
 
 #endif /*CONFIG_USB_MUSB_TUSB6010 */
 
-
-static struct omap2_mcspi_device_config p54spi_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct spi_board_info n800_spi_board_info[] __initdata = {
-	{
-		.modalias	= "p54spi",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.max_speed_hz   = 48000000,
-		.controller_data = &p54spi_mcspi_config,
-	},
-};
-
 #if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP)
 
 /*
@@ -524,7 +508,5 @@ omap_late_initcall(n8x0_late_initcall);
 void * __init n8x0_legacy_init(void)
 {
 	board_check_revision();
-	spi_register_board_info(n800_spi_board_info,
-				ARRAY_SIZE(n800_spi_board_info));
 	return &mmc1_data;
 }
diff --git a/drivers/net/wireless/intersil/p54/p54spi.c b/drivers/net/wireless/intersil/p54/p54spi.c
index 9d66dcae54e0..d18be2545028 100644
--- a/drivers/net/wireless/intersil/p54/p54spi.c
+++ b/drivers/net/wireless/intersil/p54/p54spi.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/firmware.h>
@@ -15,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/spi/spi.h>
 #include <linux/etherdevice.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 
 #include "p54spi.h"
@@ -30,19 +31,6 @@
 MODULE_FIRMWARE("3826.arm");
 MODULE_FIRMWARE("3826.eeprom");
 
-/* gpios should be handled in board files and provided via platform data,
- * but because it's currently impossible for p54spi to have a header file
- * in include/linux, let's use module parameters for now
- */
-
-static int p54spi_gpio_power = 97;
-module_param(p54spi_gpio_power, int, 0444);
-MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
-
-static int p54spi_gpio_irq = 87;
-module_param(p54spi_gpio_irq, int, 0444);
-MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
-
 static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
 			      void *buf, size_t len)
 {
@@ -262,14 +250,14 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 
 static void p54spi_power_off(struct p54s_priv *priv)
 {
-	disable_irq(gpio_to_irq(p54spi_gpio_irq));
-	gpio_set_value(p54spi_gpio_power, 0);
+	disable_irq(priv->irq);
+	gpiod_set_value(priv->gpio_powerdown, 1);
 }
 
 static void p54spi_power_on(struct p54s_priv *priv)
 {
-	gpio_set_value(p54spi_gpio_power, 1);
-	enable_irq(gpio_to_irq(p54spi_gpio_irq));
+	gpiod_set_value(priv->gpio_powerdown, 0);
+	enable_irq(priv->irq);
 
 	/* need to wait a while before device can be accessed, the length
 	 * is just a guess
@@ -608,31 +596,20 @@ static int p54spi_probe(struct spi_device *spi)
 		goto err_free;
 	}
 
-	ret = gpio_request(p54spi_gpio_power, "p54spi power");
-	if (ret < 0) {
-		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
+	priv->gpio_powerdown = gpiod_get_optional(&spi->dev, "powerdown", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->gpio_powerdown)) {
+		ret = dev_err_probe(&priv->spi->dev, PTR_ERR(priv->gpio_powerdown),
+				    "powerdown GPIO request failed\n");
 		goto err_free;
 	}
 
-	ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
-	if (ret < 0) {
-		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
-		goto err_free_gpio_power;
-	}
-
-	gpio_direction_output(p54spi_gpio_power, 0);
-	gpio_direction_input(p54spi_gpio_irq);
-
-	ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
-			  p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi",
-			  priv->spi);
+	ret = request_irq(spi->irq, p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi", priv->spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "request_irq() failed");
-		goto err_free_gpio_irq;
+		goto err_free_gpio_power;
 	}
 
-	irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
-
+	priv->irq = spi->irq;
 	INIT_WORK(&priv->work, p54spi_work);
 	init_completion(&priv->fw_comp);
 	INIT_LIST_HEAD(&priv->tx_pending);
@@ -659,11 +636,9 @@ static int p54spi_probe(struct spi_device *spi)
 
 err_free_common:
 	release_firmware(priv->firmware);
-	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
-err_free_gpio_irq:
-	gpio_free(p54spi_gpio_irq);
+	free_irq(priv->irq, spi);
 err_free_gpio_power:
-	gpio_free(p54spi_gpio_power);
+	gpiod_put(priv->gpio_powerdown);
 err_free:
 	p54_free_common(priv->hw);
 	return ret;
@@ -675,10 +650,8 @@ static void p54spi_remove(struct spi_device *spi)
 
 	p54_unregister_common(priv->hw);
 
-	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
-
-	gpio_free(p54spi_gpio_power);
-	gpio_free(p54spi_gpio_irq);
+	free_irq(priv->irq, spi);
+	gpiod_put(priv->gpio_powerdown);
 	release_firmware(priv->firmware);
 
 	mutex_destroy(&priv->mutex);
@@ -686,10 +659,16 @@ static void p54spi_remove(struct spi_device *spi)
 	p54_free_common(priv->hw);
 }
 
+static const struct of_device_id p54spi_of_ids[] = {
+	{ .compatible = "st,stlc4560", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, p54spi_of_ids);
 
 static struct spi_driver p54spi_driver = {
 	.driver = {
 		.name		= "p54spi",
+		.of_match_table = p54spi_of_ids,
 	},
 
 	.probe		= p54spi_probe,
diff --git a/drivers/net/wireless/intersil/p54/p54spi.h b/drivers/net/wireless/intersil/p54/p54spi.h
index e5619a13fd61..118785cc635a 100644
--- a/drivers/net/wireless/intersil/p54/p54spi.h
+++ b/drivers/net/wireless/intersil/p54/p54spi.h
@@ -107,6 +107,9 @@ struct p54s_priv {
 
 	enum fw_state fw_state;
 	const struct firmware *firmware;
+
+	struct gpio_desc *gpio_powerdown;
+	int irq;
 };
 
 #endif /* P54SPI_H */
-- 
2.39.5

Re: [PATCH 2/3] [v5 net-next] p54spi: convert to devicetree

[Bartosz Golaszewski]

On Thu, 7 May 2026 23:24:50 +0200, Arnd Bergmann <arnd@kernel.org> said:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The Prism54 SPI driver hardcodes GPIO numbers and expects users to
> pass them as module parameters, apparently a relic from its life as a
> staging driver. This works because there is only one user, the Nokia
> N8x0 tablet.
>
> Convert this to the gpio descriptor interface and DT based probing
> to improve this and simplify the code at the same time.
>
> Acked-by: Christian Lamparter <chunkeey@gmail.com>
> Reviewed-by: Linus Walleij <linusw@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

Re: [PATCH 2/3] [v5 net-next] p54spi: convert to devicetree

[Simon Horman]

From: 'Simon Horman' <horms@kernel.org>

This is an AI-generated review of your patch. The human sending this
email has considered the AI review valid, or at least plausible.
Full review at: https://sashiko.dev
---
p54spi: convert to devicetree

This commit converts the Prism54 SPI driver from using hardcoded GPIO
module parameters to using the GPIO descriptor interface and device tree
probing.

> diff --git a/drivers/net/wireless/intersil/p54/p54spi.c b/drivers/net/wireless/intersil/p54/p54spi.c
> index 9d66dcae54e02..d18be25450285 100644
> --- a/drivers/net/wireless/intersil/p54/p54spi.c
> +++ b/drivers/net/wireless/intersil/p54/p54spi.c

[ ... ]

> @@ -30,19 +31,6 @@
>  MODULE_FIRMWARE("3826.arm");
>  MODULE_FIRMWARE("3826.eeprom");
>  
> -/* gpios should be handled in board files and provided via platform data,
> - * but because it's currently impossible for p54spi to have a header file
> - * in include/linux, let's use module parameters for now
> - */
> -
> -static int p54spi_gpio_power = 97;
> -module_param(p54spi_gpio_power, int, 0444);
> -MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
> -
> -static int p54spi_gpio_irq = 87;
> -module_param(p54spi_gpio_irq, int, 0444);
> -MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
> -
>  static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
>  			      void *buf, size_t len)
>  {

Simon says: As a pre-existing issue I don't think we need to be concerned
            about this in the scope of this patch-set. But it may
	    be a potential for follow-up.

This problem wasn't introduced by this patch, but I noticed a pre-existing
issue in the context here. Does the p54spi_spi_read() function perform an SPI
transfer using a stack-allocated buffer?

Looking at p54spi_spi_read(), the addr variable is allocated on the stack and
passed as a transfer buffer to spi_sync(). The SPI framework maps transfer
buffers for DMA. Passing a stack-allocated buffer is illegal, particularly with
CONFIG_VMAP_STACK enabled, because stack memory resides in vmalloc space and
cannot be safely DMA-mapped.

Could this cause memory corruption or a kernel panic during the transfer?

[ ... ]

> @@ -608,31 +596,20 @@ static int p54spi_probe(struct spi_device *spi)
>  		goto err_free;
>  	}
>  
> -	ret = gpio_request(p54spi_gpio_power, "p54spi power");
> -	if (ret < 0) {
> -		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
> +	priv->gpio_powerdown = gpiod_get_optional(&spi->dev, "powerdown", GPIOD_OUT_HIGH);
> +	if (IS_ERR(priv->gpio_powerdown)) {
> +		ret = dev_err_probe(&priv->spi->dev, PTR_ERR(priv->gpio_powerdown),
> +				    "powerdown GPIO request failed\n");
>  		goto err_free;
>  	}
>  
> -	ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
> -	if (ret < 0) {
> -		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
> -		goto err_free_gpio_power;
> -	}
> -
> -	gpio_direction_output(p54spi_gpio_power, 0);
> -	gpio_direction_input(p54spi_gpio_irq);
> -
> -	ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
> -			  p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi",
> -			  priv->spi);
> +	ret = request_irq(spi->irq, p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi", priv->spi);

Simon says: This one seems more concerning in the context of this patch-set.

Is there missing validation for spi->irq before calling request_irq()?

If the device tree node lacks an interrupts property, the SPI core may set
spi->irq to 0 or a negative error code.

Passing this directly to request_irq() without validation can successfully
hijack a core system interrupt like the system timer on some architectures,
leading to system instability or deadlocks.

Should there be a check like if (spi->irq <= 0) to fail the probe gracefully?

>  	if (ret < 0) {
>  		dev_err(&priv->spi->dev, "request_irq() failed");
> -		goto err_free_gpio_irq;
> +		goto err_free_gpio_power;
>  	}

Re: [PATCH 2/3] [v5 net-next] p54spi: convert to devicetree

[Arnd Bergmann]

On Mon, May 11, 2026, at 18:12, Simon Horman wrote:
>
> Simon says: As a pre-existing issue I don't think we need to be concerned
>             about this in the scope of this patch-set. But it may
> 	    be a potential for follow-up.
>
> This problem wasn't introduced by this patch, but I noticed a pre-existing
> issue in the context here. Does the p54spi_spi_read() function perform an SPI
> transfer using a stack-allocated buffer?
>
> Looking at p54spi_spi_read(), the addr variable is allocated on the stack and
> passed as a transfer buffer to spi_sync(). The SPI framework maps transfer
> buffers for DMA. Passing a stack-allocated buffer is illegal, particularly with
> CONFIG_VMAP_STACK enabled, because stack memory resides in vmalloc space and
> cannot be safely DMA-mapped.
>
> Could this cause memory corruption or a kernel panic during the transfer?

I already commented on this earlier: This is indeed a theoretical
bug, but it works in practice because DMA-capable SPI controllers
tend to all use MMIO for short transfers instead of DMA.

SPI is very fragile this way, and I do have some patches to improve
that overall, but it seems out of scope for this one driver.

>> -
>> -	gpio_direction_output(p54spi_gpio_power, 0);
>> -	gpio_direction_input(p54spi_gpio_irq);
>> -
>> -	ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
>> -			  p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi",
>> -			  priv->spi);
>> +	ret = request_irq(spi->irq, p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi", priv->spi);
>
> Simon says: This one seems more concerning in the context of this patch-set.
>
> Is there missing validation for spi->irq before calling request_irq()?
>
> If the device tree node lacks an interrupts property, the SPI core may set
> spi->irq to 0 or a negative error code.
>
> Passing this directly to request_irq() without validation can successfully
> hijack a core system interrupt like the system timer on some architectures,
> leading to system instability or deadlocks.
>
> Should there be a check like if (spi->irq <= 0) to fail the probe gracefully?

I also commented on this: request_irq() already fails gracefully
with -EINVAL when presented with an invalid IRQ. IRQ 0 is guaranteed
to be invalid on any target that uses devicetree.

      Arnd

[PATCH 3/3] [v5 omap] ARM: dts: omap2: add stlc4560 spi-wireless node

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

Converted from the platform_device creation in board-n8x0.c.

Link: https://lore.kernel.org/all/20230314163201.955689-1-arnd@kernel.org/
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/boot/dts/ti/omap/omap2.dtsi                |  4 ++++
 arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi | 12 ++++++++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/ti/omap/omap2.dtsi b/arch/arm/boot/dts/ti/omap/omap2.dtsi
index afabb36a8ac1..fdc1790adf43 100644
--- a/arch/arm/boot/dts/ti/omap/omap2.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2.dtsi
@@ -129,6 +129,8 @@ i2c2: i2c@48072000 {
 		};
 
 		mcspi1: spi@48098000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi1";
 			reg = <0x48098000 0x100>;
@@ -140,6 +142,8 @@ mcspi1: spi@48098000 {
 		};
 
 		mcspi2: spi@4809a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi2";
 			reg = <0x4809a000 0x100>;
diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
index 63b0b4921e4e..fe9dd8bbfc85 100644
--- a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
@@ -109,3 +109,15 @@ partition@5 {
 		};
 	};
 };
+
+&mcspi2 {
+	status = "okay";
+
+	wifi@0 {
+		reg = <0>;
+		compatible = "st,stlc4560";
+		spi-max-frequency = <48000000>;
+		interrupts-extended = <&gpio3 23 IRQ_TYPE_EDGE_RISING>;
+		powerdown-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* gpio 97 */
+	};
+};
-- 
2.39.5