Re: [PATCH v3 0/7] b43: complete N-PHY rev 8 + radio 2057 rev 8 support

["Michael Büsch" <m@bues.ch>]

[-- Attachment #1: Type: text/plain, Size: 1272 bytes --]

On Sun, 24 May 2026 23:56:17 +0200
Alessio Ferri <alessio.ferri@mythread.it> wrote:

> Alessio Ferri (7):
>       b43: add firmware mappings and remove comments wondering about rev22 initvals
>       b43: add d11 core revision 0x16 to id table
>       b43: route d11 corerev 22 to 24-bit indirect radio access
>       b43: support radio 2057 rev 8
>       b43: add IPA TX gain table for N-PHY r8 + radio 2057 r8
>       b43: add channel info table for N-PHY r8 + radio 2057 r8
>       b43: add RF power offset for N-PHY r8 + radio 2057 r8
> 
>  drivers/net/wireless/broadcom/b43/main.c        |  22 ++-
>  drivers/net/wireless/broadcom/b43/radio_2057.c  | 230 ++++++++++++++++++++++--
>  drivers/net/wireless/broadcom/b43/tables_nphy.c |  58 ++++++
>  3 files changed, 290 insertions(+), 20 deletions(-)


Looks good and in general low risk because it doesn't change any code
paths of supported hw revisions.
I'd still prefer if somebody could test this change on another supported 2057 radio.
I don't have such a device unfortunately.

Does the D-Link DSL-3580L work with full expected wireless throughput after this change
or are there any remaining known issues?

Acked-by: Michael Büsch <m@bues.ch>

-- 
Michael Büsch
https://bues.ch/

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]