* [PATCH v2 2/2] wifi: rtlwifi: fix typos in comments
2026-09-07 4:48 [PATCH v2 0/2] wifi: realtek: fix typos in comments Hemanth Selam
2026-09-07 4:48 ` [PATCH v2 1/2] wifi: rtl8xxxu: fix typo "Tranceiver" in comment Hemanth Selam
@ 2026-09-07 4:48 ` Hemanth Selam
2026-09-07 5:23 ` Ping-Ke Shih
1 sibling, 1 reply; 5+ messages in thread
From: Hemanth Selam @ 2026-09-07 4:48 UTC (permalink / raw)
To: Jes Sorensen, Ping-Ke Shih; +Cc: linux-wireless, linux-kernel
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Since v1 this is split out of a single "wifi: realtek:" patch, and the
single-line comments it touches now carry exactly one space after "/*"
and before "*/", as Ping-Ke Shih asked. Comment blocks are left alone.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
drivers/net/wireless/realtek/rtlwifi/base.c | 2 +-
.../realtek/rtlwifi/btcoexist/halbtc8192e2ant.c | 2 +-
.../realtek/rtlwifi/btcoexist/halbtc8723b2ant.c | 2 +-
.../realtek/rtlwifi/btcoexist/halbtc8821a2ant.c | 2 +-
drivers/net/wireless/realtek/rtlwifi/core.c | 4 ++--
drivers/net/wireless/realtek/rtlwifi/debug.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/dm.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/hw.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/phy.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/phy.h | 2 +-
.../wireless/realtek/rtlwifi/rtl8188ee/pwrseq.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/reg.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8188ee/trx.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8192ce/hw.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8192ce/trx.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8192d/reg.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8192de/hw.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8192du/phy.c | 4 ++--
.../net/wireless/realtek/rtlwifi/rtl8192ee/fw.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8192ee/phy.c | 2 +-
.../wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8192ee/trx.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 4 ++--
.../net/wireless/realtek/rtlwifi/rtl8192se/phy.c | 10 +++++-----
.../net/wireless/realtek/rtlwifi/rtl8192se/reg.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8192se/trx.c | 4 ++--
.../wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c | 2 +-
.../wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8723ae/trx.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8723be/dm.c | 2 +-
.../wireless/realtek/rtlwifi/rtl8723be/pwrseq.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8723be/reg.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8723be/trx.c | 4 ++--
.../net/wireless/realtek/rtlwifi/rtl8821ae/dm.c | 12 ++++++------
.../net/wireless/realtek/rtlwifi/rtl8821ae/fw.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 2 +-
.../wireless/realtek/rtlwifi/rtl8821ae/pwrseq.h | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8821ae/reg.h | 14 +++++++-------
.../net/wireless/realtek/rtlwifi/rtl8821ae/trx.c | 2 +-
drivers/net/wireless/realtek/rtlwifi/usb.c | 2 +-
drivers/net/wireless/realtek/rtlwifi/wifi.h | 6 +++---
41 files changed, 63 insertions(+), 63 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c
index 9e98c01bb90e..b6dcdd03535a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -1271,7 +1271,7 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw,
tcb_desc->disable_ratefallback = 1;
} else {
/*
- *because hw will nerver use hw_rate
+ *because hw will never use hw_rate
*when tcb_desc->use_driver_rate = false
*so we never set highest N rate here,
*and N rate will all be controlled by FW
diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c
index edcd3c879f7f..7bece8765c7f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8192e2ant.c
@@ -1667,7 +1667,7 @@ static void btc8192e2ant_tdma_duration_adjust(struct btc_coexist *btcoexist,
n = 3;
wait_cnt = 0;
} else {
- /* accquire the BT TRx retry count from BT_Info byte2 */
+ /* acquire the BT TRx retry count from BT_Info byte2 */
retry_cnt = coex_sta->bt_retry_cnt;
rtl_dbg(rtlpriv, COMP_BT_COEXIST, DBG_LOUD,
"[BTCoex], retry_cnt = %d\n", retry_cnt);
diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
index 7a71f063015a..dac0568f6fd8 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
@@ -1894,7 +1894,7 @@ static void btc8723b2ant_tdma_duration_adjust(struct btc_coexist *btcoexist,
result = 0;
wait_count = 0;
} else {
- /*accquire the BT TRx retry count from BT_Info byte2*/
+ /* acquire the BT TRx retry count from BT_Info byte2 */
retry_count = coex_sta->bt_retry_cnt;
if ((coex_sta->low_priority_tx) > 1050 ||
diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c
index c5b8df58d4a2..e9045551e89f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c
@@ -1780,7 +1780,7 @@ static void btc8821a2ant_tdma_duration_adjust(struct btc_coexist *btcoexist,
result = 0;
wait_count = 0;
} else {
- /* accquire the BT TRx retry count from BT_Info byte2 */
+ /* acquire the BT TRx retry count from BT_Info byte2 */
retry_count = coex_sta->bt_retry_cnt;
rtl_dbg(rtlpriv, COMP_BT_COEXIST, DBG_LOUD,
"[BTCoex], retry_count = %d\n", retry_count);
diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c b/drivers/net/wireless/realtek/rtlwifi/core.c
index 22633c301564..e971132fee14 100644
--- a/drivers/net/wireless/realtek/rtlwifi/core.c
+++ b/drivers/net/wireless/realtek/rtlwifi/core.c
@@ -608,7 +608,7 @@ static int rtl_op_config(struct ieee80211_hw *hw, int radio_idx, u32 changed)
/* sleep here is must, or we may recv the beacon and
* cause mac80211 into wrong ps state, this will cause
* power save nullfunc send fail, and further cause
- * pkt loss, So sleep must quickly but not immediatly
+ * pkt loss, So sleep must quickly but not immediately
* because that will cause nullfunc send by mac80211
* fail, and cause pkt loss, we have tested that 5mA
* is worked very well */
@@ -1711,7 +1711,7 @@ static void rtl_op_rfkill_poll(struct ieee80211_hw *hw)
}
/* this function is called by mac80211 to flush tx buffer
- * before switch channle or power save, or tx buffer packet
+ * before switch channel or power save, or tx buffer packet
* maybe send after offchannel or rf sleep, this may cause
* dis-association by AP */
static void rtl_op_flush(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/realtek/rtlwifi/debug.h b/drivers/net/wireless/realtek/rtlwifi/debug.h
index 1c0bcf8ec1a9..afed6ac36afc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/debug.h
+++ b/drivers/net/wireless/realtek/rtlwifi/debug.h
@@ -18,7 +18,7 @@
/*#define DBG_EMERG 0 */
/*
- *Abnormal, rare, or unexpeted cases.
+ *Abnormal, rare, or unexpected cases.
*For example, Packet/IO Ctl canceled,
*device suprisely unremoved and so on.
*/
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c
index f749d19ec5f5..d9132d90feb1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c
@@ -879,7 +879,7 @@ static void dm_txpower_track_cb_therm(struct ieee80211_hw *hw)
{0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 25, 25}
};
- /*Initilization (7 steps in total) */
+ /* Initialization (7 steps in total) */
rtlpriv->dm.txpower_trackinginit = true;
rtl_dbg(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
"%s\n", __func__);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
index 53c32e1de7e4..321c395f85e5 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
@@ -1090,7 +1090,7 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
rtl88e_phy_mac_config(hw);
/* because last function modify RCR, so we update
* rcr var here, or TP will unstable for receive_config
- * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+ * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx
* RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
*/
rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
index 0fab3a0c7d49..754ca8549c76 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
@@ -1891,7 +1891,7 @@ static void _rtl88e_phy_set_rfpath_switch(struct ieee80211_hw *hw,
rtl_set_bbreg(hw, 0x914, MASKLWORD, 0x0201);
/* We use the RF definition of MAIN and AUX,
- * left antenna and right antenna repectively.
+ * left antenna and right antenna respectively.
* Default output at AUX.
*/
if (bmain) {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.h b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.h
index 8157ef419eeb..3fef46e67501 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.h
@@ -5,7 +5,7 @@
#define __RTL92C_PHY_H__
/* MAX_TX_COUNT must always set to 4, otherwise read efuse
- * table secquence will be wrong.
+ * table sequence will be wrong.
*/
#define MAX_TX_COUNT 4
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/pwrseq.h
index 42e222c1795f..d34c50a4285e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/pwrseq.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/pwrseq.h
@@ -14,7 +14,7 @@
* 4: LPS--Low Power State
* 5: SUS--Suspend
*
- * The transision from different states are defined below
+ * The transition from different states are defined below
* TRANS_CARDEMU_TO_ACT
* TRANS_ACT_TO_CARDEMU
* TRANS_CARDEMU_TO_SUS
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/reg.h b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/reg.h
index 0fc8db8916fa..d23da11c2f8e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/reg.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/reg.h
@@ -609,7 +609,7 @@
#define HWSET_MAX_SIZE 512
#define EFUSE_MAX_SECTION 64
#define EFUSE_REAL_CONTENT_LEN 256
-/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte.*/
+/* PG data exclude header, dummy 7 bytes from CP test and reserved 1byte. */
#define EFUSE_OOB_PROTECT_BYTES 18
#define EEPROM_DEFAULT_TSSI 0x0
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c
index d094163a9a71..ce19b09e36be 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c
@@ -432,7 +432,7 @@ bool rtl88ee_rx_query_desc(struct ieee80211_hw *hw,
/* hw will set status->decrypted true, if it finds the
* frame is open data frame or mgmt frame.
- * So hw will not decryption robust managment frame
+ * So hw will not decryption robust management frame
* for IEEE80211w but still set status->decrypted
* true, so here we should set it back to undecrypted
* for IEEE80211w frame, and mac80211 sw will help
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
index 4354ae67a379..942ffea27547 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c
@@ -952,7 +952,7 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw)
rtl92c_phy_mac_config(hw);
/* because last function modify RCR, so we update
* rcr var here, or TP will unstable for receive_config
- * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+ * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx
* RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/
rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/trx.c
index ed151754fc6e..99472053ccff 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/trx.c
@@ -302,7 +302,7 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
/* hw will set stats->decrypted true, if it finds the
* frame is open data frame or mgmt frame.
- * So hw will not decryption robust managment frame
+ * So hw will not decryption robust management frame
* for IEEE80211w but still set status->decrypted
* true, so here we should set it back to undecrypted
* for IEEE80211w frame, and mac80211 sw will help
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192d/reg.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192d/reg.h
index b5b906b799cb..639aa0d92e05 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192d/reg.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192d/reg.h
@@ -1051,7 +1051,7 @@
/* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
/* 3. RF register 0x00-2E */
/* 4. Bit Mask for BB/RF register */
-/* 5. Other defintion for BB/RF R/W */
+/* 5. Other definition for BB/RF R/W */
/* 3. Page8(0x800) */
#define RFPGA0_RFMOD 0x800
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
index 03f4314bdb2e..d7f48f2bde7a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
@@ -644,7 +644,7 @@ int rtl92de_hw_init(struct ieee80211_hw *hw)
rtl92d_phy_mac_config(hw);
/* because last function modify RCR, so we update
* rcr var here, or TP will unstable for receive_config
- * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+ * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx
* RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/
rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c
index 8c2167cc1f13..fe3af3e8e345 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c
@@ -764,7 +764,7 @@ static void _rtl92du_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
rtlhal->interfaceindex == 1) {
need_pwr_down = rtl92du_phy_enable_anotherphy(hw, false);
rtlhal->during_mac1init_radioa = true;
- /* asume no this case */
+ /* assume no this case */
if (need_pwr_down)
rtl92d_phy_enable_rf_env(hw, path,
&u4regvalue);
@@ -2248,7 +2248,7 @@ static void _rtl92du_phy_reload_lck_setting(struct ieee80211_hw *hw, u8 channel)
bneed_powerdown_radio =
rtl92du_phy_enable_anotherphy(hw, false);
rtlpriv->rtlhal.during_mac1init_radioa = true;
- /* asume no this case */
+ /* assume no this case */
if (bneed_powerdown_radio)
rtl92d_phy_enable_rf_env(hw, erfpath,
&u4regvalue);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
index 88b7a715f4c5..3728e3ec2c25 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c
@@ -762,7 +762,7 @@ void rtl92ee_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
}
}
-/*Shoud check FW support p2p or not.*/
+/* Should check FW support p2p or not. */
static void rtl92ee_set_p2p_ctw_period_cmd(struct ieee80211_hw *hw, u8 ctwindow)
{
u8 u1_ctwindow_period[1] = {ctwindow};
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c
index 1e7f0cd1c86e..2435d457e520 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c
@@ -2733,7 +2733,7 @@ static void _rtl92ee_phy_set_rfpath_switch(struct ieee80211_hw *hw,
rtl_set_bbreg(hw, 0x914, MASKLWORD, 0x0201);
/* We use the RF definition of MAIN and AUX,
- * left antenna and right antenna repectively.
+ * left antenna and right antenna respectively.
* Default output at AUX.
*/
if (bmain) {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h
index 2ae8347f7ebb..09f12b5a41ba 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h
@@ -15,7 +15,7 @@
* 4: LPS--Low Power State
* 5: SUS--Suspend
*
- * The transision from different states are defined below
+ * The transition from different states are defined below
* TRANS_CARDEMU_TO_ACT
* TRANS_ACT_TO_CARDEMU
* TRANS_CARDEMU_TO_SUS
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c
index 16589e18494b..658591badd8e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c
@@ -385,7 +385,7 @@ bool rtl92ee_rx_query_desc(struct ieee80211_hw *hw,
/* hw will set status->decrypted true, if it finds the
* frame is open data frame or mgmt frame.
- * So hw will not decryption robust managment frame
+ * So hw will not decryption robust management frame
* for IEEE80211w but still set status->decrypted
* true, so here we should set it back to undecrypted
* for IEEE80211w frame, and mac80211 sw will help
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
index e5775b94f04e..272c1b3b576d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
@@ -982,7 +982,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
/* because last function modify RCR, so we update
* rcr var here, or TP will unstable for receive_config
- * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+ * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx
* RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
*/
rtlpci->receive_config = rtl_read_dword(rtlpriv, RCR);
@@ -2367,7 +2367,7 @@ bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
}
/* Is_wepkey just used for WEP used as group & pairwise key
- * if pairwise is AES ang group is WEP Is_wepkey == false.*/
+ * if pairwise is AES and group is WEP Is_wepkey == false.*/
void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all)
{
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
index d9ef7e1da1db..11e783f9b4c2 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c
@@ -689,7 +689,7 @@ static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
rtlphy->phyreg_def[RF90_PATH_C].rfintfe = RFPGA0_XC_RFINTERFACEOE;
rtlphy->phyreg_def[RF90_PATH_D].rfintfe = RFPGA0_XD_RFINTERFACEOE;
- /* Addr of LSSI. Wirte RF register by driver */
+ /* Addr of LSSI. Write RF register by driver */
rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
RFPGA0_XA_LSSIPARAMETER;
rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =
@@ -711,13 +711,13 @@ static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
- /* Tranceiver A~D HSSI Parameter-1 */
+ /* Transceiver A~D HSSI Parameter-1 */
rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para1 = RFPGA0_XC_HSSIPARAMETER1;
rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para1 = RFPGA0_XD_HSSIPARAMETER1;
- /* Tranceiver A~D HSSI Parameter-2 */
+ /* Transceiver A~D HSSI Parameter-2 */
rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2;
rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2;
rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para2 = RFPGA0_XC_HSSIPARAMETER2;
@@ -765,13 +765,13 @@ static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
- /* Tranceiver LSSI Readback */
+ /* Transceiver LSSI Readback */
rtlphy->phyreg_def[RF90_PATH_A].rf_rb = RFPGA0_XA_LSSIREADBACK;
rtlphy->phyreg_def[RF90_PATH_B].rf_rb = RFPGA0_XB_LSSIREADBACK;
rtlphy->phyreg_def[RF90_PATH_C].rf_rb = RFPGA0_XC_LSSIREADBACK;
rtlphy->phyreg_def[RF90_PATH_D].rf_rb = RFPGA0_XD_LSSIREADBACK;
- /* Tranceiver LSSI Readback PI mode */
+ /* Transceiver LSSI Readback PI mode */
rtlphy->phyreg_def[RF90_PATH_A].rf_rbpi = TRANSCEIVERA_HSPI_READBACK;
rtlphy->phyreg_def[RF90_PATH_B].rf_rbpi = TRANSCEIVERB_HSPI_READBACK;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/reg.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/reg.h
index 45f968e0e57c..bd43d91bc146 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/reg.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/reg.h
@@ -303,7 +303,7 @@
#define RPWM PCI_RPWM
-/* Regsiter Bit and Content definition */
+/* Register Bit and Content definition */
#define ISO_MD2PP BIT(0)
#define ISO_PA2PCIE BIT(3)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/trx.c
index f104cdb649f8..b057d035a3a8 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/trx.c
@@ -276,7 +276,7 @@ bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
/* hw will set stats->decrypted true, if it finds the
* frame is open data frame or mgmt frame,
- * hw will not decrypt robust managment frame
+ * hw will not decrypt robust management frame
* for IEEE80211w but still set stats->decrypted
* true, so here we should set it back to undecrypted
* for IEEE80211w frame, and mac80211 sw will help
@@ -466,7 +466,7 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
/* Alwasy enable all rate fallback range */
set_tx_desc_data_rate_fb_limit(pdesc, 0x1F);
- /* Fix: I don't kown why hw use 6.5M to tx when set it */
+ /* Fix: I don't known why hw use 6.5M to tx when set it */
set_tx_desc_user_rate(pdesc,
ptcb_desc->use_driver_rate ? 1 : 0);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c
index b34dffc6a30c..b36f958a7363 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c
@@ -889,7 +889,7 @@ void rtl8723e_dm_bt_set_bt_dm(struct ieee80211_hw *hw,
/* Note:
* We should add delay for making sure
- * sw DacSwing can be set sucessfully.
+ * sw DacSwing can be set successfully.
* because of that rtl8723e_dm_bt_set_fw_2_ant_hid()
* and rtl8723e_dm_bt_set_fw_tdma_ctrl()
* will overwrite the reg 0x880.
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h
index d9247a8f3039..4835fb17c5e1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h
@@ -15,7 +15,7 @@
* 4: LPS--Low Power State
* 5: SUS--Suspend
*
- * The transision from different states are defined below
+ * The transition from different states are defined below
* TRANS_CARDEMU_TO_ACT
* TRANS_ACT_TO_CARDEMU
* TRANS_CARDEMU_TO_SUS
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/trx.c
index 65bfc14702f4..f40b0efebe3a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/trx.c
@@ -305,7 +305,7 @@ bool rtl8723e_rx_query_desc(struct ieee80211_hw *hw,
/* hw will set status->decrypted true, if it finds the
* frame is open data frame or mgmt frame.
- * So hw will not decryption robust managment frame
+ * So hw will not decryption robust management frame
* for IEEE80211w but still set status->decrypted
* true, so here we should set it back to undecrypted
* for IEEE80211w frame, and mac80211 sw will help
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c
index c65d14fb914f..82e6202fca38 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c
@@ -742,7 +742,7 @@ static void rtl8723be_dm_txpower_tracking_callback_thermalmeter(
5, 6, 6, 6, 6, 7, 7, 7, 8, 8, 9,
9, 10, 10, 11, 12, 13, 14, 15};
- /*Initilization ( 7 steps in total )*/
+ /* Initialization ( 7 steps in total ) */
rtlpriv->dm.txpower_trackinginit = true;
rtl_dbg(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
"%s\n", __func__);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h
index 57eac4864184..94f7ab48cab2 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/pwrseq.h
@@ -15,7 +15,7 @@
* 4: LPS--Low Power State
* 5: SUS--Suspend
*
- * The transision from different states are defined below
+ * The transition from different states are defined below
* TRANS_CARDEMU_TO_ACT
* TRANS_ACT_TO_CARDEMU
* TRANS_CARDEMU_TO_SUS
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/reg.h b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/reg.h
index 28fd22b2a792..35c96d33e8e0 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/reg.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/reg.h
@@ -603,7 +603,7 @@
#define EFUSE_MAX_SECTION 64
#define EFUSE_REAL_CONTENT_LEN 256
#define EFUSE_OOB_PROTECT_BYTES 18 /* PG data exclude header,
- * dummy 7 bytes frome CP test
+ * dummy 7 bytes from CP test
* and reserved 1byte.
*/
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c
index 8b6352f7f93b..b6029bfaedac 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c
@@ -220,7 +220,7 @@ static void _rtl8723be_translate_rx_signal_stuff(struct ieee80211_hw *hw,
(ether_addr_equal(praddr, rtlefuse->dev_addr));
/* YP: packet_beacon is not initialized,
- * this assignment is neccesary,
+ * this assignment is necessary,
* otherwise it counld be true in this case
* the situation is much worse in Kernel 3.10
*/
@@ -360,7 +360,7 @@ bool rtl8723be_rx_query_desc(struct ieee80211_hw *hw,
/* hw will set status->decrypted true, if it finds the
* frame is open data frame or mgmt frame.
- * So hw will not decryption robust managment frame
+ * So hw will not decryption robust management frame
* for IEEE80211w but still set status->decrypted
* true, so here we should set it back to undecrypted
* for IEEE80211w frame, and mac80211 sw will help
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
index f8b159c74658..0e8547a29f0a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
@@ -1150,7 +1150,7 @@ u8 rtl8821ae_hw_rate_to_mrate(struct ieee80211_hw *hw, u8 rate)
/*-----------------------------------------------------------------------------
* Function: odm_TxPwrTrackSetPwr88E()
*
- * Overview: 88E change all channel tx power accordign to flag.
+ * Overview: 88E change all channel tx power according to flag.
* OFDM & CCK are all different.
*
* Input: NONE
@@ -1459,7 +1459,7 @@ void rtl8812ae_dm_txpower_tracking_callback_thermalmeter(
const u8 *delta_swing_table_idx_tup_b;
const u8 *delta_swing_table_idx_tdown_b;
- /*2. Initialization ( 7 steps in total )*/
+ /* 2. Initialization ( 7 steps in total ) */
rtl8812ae_get_delta_swing_table(hw,
&delta_swing_table_idx_tup_a,
&delta_swing_table_idx_tdown_a,
@@ -1546,7 +1546,7 @@ void rtl8812ae_dm_txpower_tracking_callback_thermalmeter(
if (delta > 0 && rtldm->txpower_track_control) {
/* "delta" here is used to record the
- * absolute value of differrence.
+ * absolute value of difference.
*/
delta = thermal_value > rtlefuse->eeprom_thermalmeter ?
(thermal_value - rtlefuse->eeprom_thermalmeter) :
@@ -1829,7 +1829,7 @@ static void rtl8821ae_get_delta_swing_table(struct ieee80211_hw *hw,
/*-----------------------------------------------------------------------------
* Function: odm_TxPwrTrackSetPwr88E()
*
- * Overview: 88E change all channel tx power accordign to flag.
+ * Overview: 88E change all channel tx power according to flag.
* OFDM & CCK are all different.
*
* Input: NONE
@@ -2029,7 +2029,7 @@ void rtl8821ae_dm_txpower_tracking_callback_thermalmeter(
const u8 *delta_swing_table_idx_tup_a;
const u8 *delta_swing_table_idx_tdown_a;
- /*2. Initilization ( 7 steps in total )*/
+ /* 2. Initialization ( 7 steps in total ) */
rtl8821ae_get_delta_swing_table(hw,
&delta_swing_table_idx_tup_a,
&delta_swing_table_idx_tdown_a);
@@ -2111,7 +2111,7 @@ void rtl8821ae_dm_txpower_tracking_callback_thermalmeter(
if (delta > 0 && rtldm->txpower_track_control) {
/*"delta" here is used to record the
- * absolute value of differrence.
+ * absolute value of difference.
*/
delta = thermal_value > rtlefuse->eeprom_thermalmeter ?
(thermal_value - rtlefuse->eeprom_thermalmeter) :
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
index 1ae56e15ca7f..4facbc0bff4e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
@@ -654,7 +654,7 @@ void rtl8821ae_set_fw_keep_alive_cmd(struct ieee80211_hw *hw,
rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD, "Enable(%d)\n", func_en);
SET_8812_H2CCMD_KEEP_ALIVE_ENABLE(keep_alive_info, func_en);
- /* 1: the period is controled by driver, 0: by Fw default */
+ /* 1: the period is controlled by driver, 0: by Fw default */
SET_8812_H2CCMD_KEEP_ALIVE_ACCPEPT_USER_DEFINED(keep_alive_info, 1);
SET_8812_H2CCMD_KEEP_ALIVE_PERIOD(keep_alive_info, 10); /* 10 sec */
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 1ba53e671207..98d9bf370079 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -1019,7 +1019,7 @@ static void _rtl8821ae_hw_configure(struct ieee80211_hw *hw)
/* ARFB table 12 for 11ac 24G 1SS */
rtl_write_dword(rtlpriv, REG_ARFR3, 0x00000015);
rtl_write_dword(rtlpriv, REG_ARFR3 + 4, 0xffcff000);
- /* 0x420[7] = 0 , enable retry AMPDU in new AMPD not singal MPDU. */
+ /* 0x420[7] = 0 , enable retry AMPDU in new AMPD not signal MPDU. */
rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F00);
rtl_write_byte(rtlpriv, REG_AMPDU_MAX_TIME, 0x70);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/pwrseq.h
index d6f3cbab4abc..7297733c7710 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/pwrseq.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/pwrseq.h
@@ -343,7 +343,7 @@ extern struct wlan_pwr_cfg rtl8812_leave_lps_flow
* 4: LPS--Low Power State
* 5: SUS--Suspend
*
- * The transision from different states are defined below
+ * The transition from different states are defined below
* TRANS_CARDEMU_TO_ACT
* TRANS_ACT_TO_CARDEMU
* TRANS_CARDEMU_TO_SUS
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/reg.h b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/reg.h
index 7d833b72c7ed..ceddd72e2581 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/reg.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/reg.h
@@ -631,7 +631,7 @@
#define HWSET_MAX_SIZE 512
#define EFUSE_MAX_SECTION 64
#define EFUSE_REAL_CONTENT_LEN 256
-/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte.*/
+/* PG data exclude header, dummy 7 bytes from CP test and reserved 1byte. */
#define EFUSE_OOB_PROTECT_BYTES 18
#define EEPROM_DEFAULT_TSSI 0x0
@@ -1523,7 +1523,7 @@
#define ROFDM0_TXCOEFF5 0xcb4
#define ROFDM0_TXCOEFF6 0xcb8
-/*Path_A RFE cotrol */
+/* Path_A RFE control */
#define RA_RFE_CTRL_8812 0xcb8
/*Path_B RFE control*/
#define RB_RFE_CTRL_8812 0xeb8
@@ -2336,7 +2336,7 @@
#define REG_UN_used_register 0x01bf
-/* Path_A RFE cotrol pinmux*/
+/* Path_A RFE control pinmux */
#define RA_RFE_PINMUX 0xcb0
/* Path_B RFE control pinmux*/
#define RB_RFE_PINMUX 0xeb0
@@ -2345,17 +2345,17 @@
#define RB_RFE_INV 0xeb4
/* RXIQC */
-/*RxIQ imblance matrix coeff. A & B*/
+/* RxIQ imbalance matrix coeff. A & B */
#define RA_RXIQC_AB 0xc10
-/*RxIQ imblance matrix coeff. C & D*/
+/* RxIQ imbalance matrix coeff. C & D */
#define RA_RXIQC_CD 0xc14
/* Pah_A TX scaling factor*/
#define RA_TXSCALE 0xc1c
/* Path_B TX scaling factor*/
#define RB_TXSCALE 0xe1c
-/*RxIQ imblance matrix coeff. A & B*/
+/* RxIQ imbalance matrix coeff. A & B */
#define RB_RXIQC_AB 0xe10
-/*RxIQ imblance matrix coeff. C & D*/
+/* RxIQ imbalance matrix coeff. C & D */
#define RB_RXIQC_CD 0xe14
/*bit mask for IQC matrix element A & C*/
#define RXIQC_AC 0x02ff
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c
index bd71592fe26a..12a8341d2f1c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c
@@ -512,7 +512,7 @@ bool rtl8821ae_rx_query_desc(struct ieee80211_hw *hw,
/* hw will set status->decrypted true, if it finds the
* frame is open data frame or mgmt frame.
- * So hw will not decryption robust managment frame
+ * So hw will not decryption robust management frame
* for IEEE80211w but still set status->decrypted
* true, so here we should set it back to undecrypted
* for IEEE80211w frame, and mac80211 sw will help
diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 9a64df9eed39..d013e5986948 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -43,7 +43,7 @@ static void _usbctrl_vendorreq_sync(struct usb_device *udev, u8 reqtype,
reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
pdata, len, 1000);
if (status < 0) {
- /* firmware download is checksumed, don't retry */
+ /* firmware download is checksummed, don't retry */
if ((value >= FW_8192C_START_ADDRESS &&
value <= FW_8192C_END_ADDRESS))
break;
diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h
index f1830ddcdd8c..23697704ffee 100644
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -744,7 +744,7 @@ enum rtl_var_map {
RTL_IMR_BDOK, /*Beacon Queue DMA OK Interrup */
RTL_IMR_HIGHDOK, /*High Queue DMA OK Interrupt */
RTL_IMR_COMDOK, /*Command Queue DMA OK Interrupt*/
- RTL_IMR_TBDOK, /*Transmit Beacon OK interrup */
+ RTL_IMR_TBDOK, /* Transmit Beacon OK interrupt */
RTL_IMR_MGNTDOK, /*Management Queue DMA OK Interrupt */
RTL_IMR_TBDER, /*For 92C,Transmit Beacon Error Interrupt */
RTL_IMR_BKDOK, /*AC_BK DMA OK Interrupt */
@@ -2693,7 +2693,7 @@ struct rtl_priv {
int max_fw_size;
/* hal_cfg : for diff cards
- * intf_ops : for diff interrface usb/pcie
+ * intf_ops : for diff interface usb/pcie
*/
const struct rtl_hal_cfg *cfg;
const struct rtl_intf_ops *intf_ops;
@@ -2841,7 +2841,7 @@ enum bt_radio_shared {
#define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT(6)
/* no matter RFOFF or SLEEP we set PS_ASPM_LEVL*/
#define RT_PS_LEVEL_ASPM BIT(7)
-/*When LPS is on, disable 2R if no packet is received or transmittd.*/
+/* When LPS is on, disable 2R if no packet is received or transmitted. */
#define RT_RF_LPS_DISALBE_2R BIT(30)
#define RT_RF_LPS_LEVEL_ASPM BIT(31) /*LPS with ASPM */
#define RT_IN_PS_LEVEL(ppsc, _ps_flg) \
^ permalink raw reply related [flat|nested] 5+ messages in thread