From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH mt76-next 21/27] wifi: mt76: mt7996: set up the BSS of a late station link before its peer
Date: Tue, 6 Oct 2026 22:59:30 +0200 [thread overview]
Message-ID: <20261006205936.669125-21-nbd@nbd.name> (raw)
In-Reply-To: <20261006205936.669125-1-nbd@nbd.name>
On association, a station link gets its BSS_INFO with the BSSID and
its broadcast STA_REC from BSS_CHANGED_BSSID before the peer STA_REC is
created, and mt7996_link_info_changed() notes that station mode maps
the peer entry through the BSSID. For a link that becomes active later,
_ieee80211_set_active_links() calls drv_change_sta_links() first and
reports BSS_CHANGED_BSSID for the link only afterwards.
Send the BSS_INFO and the broadcast STA_REC of an added station link
from mt7996_mac_sta_change_links() before its peer entry is set up when
the station is already associated, in the order of an association. The
later BSS_CHANGED_BSSID finds the BSSID recorded and does not add the
broadcast entry as new again.
This prepares for bringing up such links in the following change.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
.../net/wireless/mediatek/mt76/mt7996/main.c | 72 +++++++++++++------
1 file changed, 52 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
index d90ada7f0f2a..4f3ebe4cee65 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
@@ -1439,26 +1439,6 @@ mt7996_mac_sta_add_links(struct mt7996_dev *dev, struct ieee80211_vif *vif,
return err;
}
-static int
-mt7996_mac_sta_change_links(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta, u16 old_links,
- u16 new_links)
-{
- struct mt7996_dev *dev = mt7996_hw_dev(hw);
- unsigned long add = new_links & ~old_links;
- unsigned long rem = old_links & ~new_links;
- int ret;
-
- mutex_lock(&dev->mt76.mutex);
-
- mt7996_mac_sta_remove_links(dev, vif, sta, rem, false);
- ret = mt7996_mac_sta_add_links(dev, vif, sta, add);
-
- mutex_unlock(&dev->mt76.mutex);
-
- return ret;
-}
-
static int
mt7996_mac_sta_add(struct mt7996_dev *dev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
@@ -1598,6 +1578,58 @@ mt7996_mac_sta_event(struct mt7996_dev *dev, struct ieee80211_vif *vif,
return err;
}
+static void
+mt7996_mac_sta_links_bss_add(struct mt7996_dev *dev, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, unsigned long links)
+{
+ struct mt7996_sta *msta = (struct mt7996_sta *)sta->drv_priv;
+ unsigned int link_id;
+
+ if (vif->type != NL80211_IFTYPE_STATION ||
+ msta->conn_state == CONN_STATE_DISCONNECT)
+ return;
+
+ for_each_set_bit(link_id, &links, IEEE80211_MLD_MAX_NUM_LINKS) {
+ struct ieee80211_bss_conf *link_conf;
+ struct mt7996_vif_link *link;
+ struct mt7996_phy *phy;
+
+ link_conf = link_conf_dereference_protected(vif, link_id);
+ if (!link_conf || !link_conf->bssid ||
+ is_zero_ether_addr(link_conf->bssid))
+ continue;
+
+ link = mt7996_vif_link(dev, vif, link_id);
+ if (!link)
+ continue;
+
+ phy = mt7996_vif_link_phy(link);
+ if (phy)
+ mt7996_vif_link_bss_add(phy, vif, link_conf, link, true);
+ }
+}
+
+static int
+mt7996_mac_sta_change_links(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, u16 old_links,
+ u16 new_links)
+{
+ struct mt7996_dev *dev = mt7996_hw_dev(hw);
+ unsigned long add = new_links & ~old_links;
+ unsigned long rem = old_links & ~new_links;
+ int ret;
+
+ mutex_lock(&dev->mt76.mutex);
+
+ mt7996_mac_sta_remove_links(dev, vif, sta, rem, false);
+ mt7996_mac_sta_links_bss_add(dev, vif, sta, add);
+ ret = mt7996_mac_sta_add_links(dev, vif, sta, add);
+
+ mutex_unlock(&dev->mt76.mutex);
+
+ return ret;
+}
+
static void
mt7996_mac_sta_remove(struct mt7996_dev *dev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
--
2.47.3
next prev parent reply other threads:[~2026-10-06 20:59 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-06 20:59 [PATCH mt76-next 01/27] wifi: mt76: abort a scan only for a link change on the scanning radio Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 02/27] wifi: mt76: mt7996: enable the SKU power limit table Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 03/27] wifi: mt76: mt7996: set sniffer mode on a radio that is already running Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 04/27] wifi: mt76: mt7996: update the address of an AP link that is added again Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 05/27] wifi: mt76: mt7996: size the MLD setup TLV by the links it describes Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 06/27] wifi: mt76: mt7996: find the last MLD link among the links torn down Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 07/27] wifi: mt76: mt7996: upload only the keys of the link being set up Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 08/27] wifi: mt76: mt7996: do not walk the vif keys when a link is destroyed Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 09/27] wifi: mt76: mt7996: report station statistics from the primary link Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 10/27] wifi: mt76: mt7996: clear all link wcid entries in sta_pre_rcu_remove Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 11/27] wifi: mt76: mt7996: free the WTBL index if a link allocation fails Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 12/27] wifi: mt76: mt7996: pick the secondary link from links with driver state Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 13/27] wifi: mt76: mt7996: make a returning link primary if a station has none Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 14/27] wifi: mt76: mt7996: do not reuse the deflink of a removed station link Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 15/27] wifi: mt76: mt7996: keep a returning link when adding station links fails Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 16/27] wifi: mt76: mt7996: add the station BMC entry as new once per BSSID Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 17/27] wifi: mt76: mt7996: keep 4-address and decap state per station Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 18/27] wifi: mt76: mt7996: do not add a station link in disconnected state Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 19/27] wifi: mt76: mt7996: record the connection state of a station Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 20/27] wifi: mt76: mt7996: keep the block ack session parameters per station Felix Fietkau
2026-10-06 20:59 ` Felix Fietkau [this message]
2026-10-06 20:59 ` [PATCH mt76-next 22/27] wifi: mt76: mt7996: bring up station links added after association Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 23/27] wifi: mt76: mt7996: set up block ack sessions on station links added later Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 24/27] wifi: mt76: mt7996: restore a station link that returns after a removal Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 25/27] wifi: mt76: mt7996: fix PLE free page and AC queue register offsets Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 26/27] wifi: mt76: mt7996: fix the hw-queues debugfs queue requests Felix Fietkau
2026-10-06 20:59 ` [PATCH mt76-next 27/27] wifi: mt76: mt7996: disable the RX NAPIs before the DMA cleanup Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261006205936.669125-21-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox