[RFC PATCH] wifi: rt2x00: use VCO_IC 0x2 for RF3053 on 2.4 GHz

[RFC PATCH] wifi: rt2x00: use VCO_IC 0x2 for RF3053 on 2.4 GHz

[Ho Jie Feng]

Using the 0x1, the VCO calibration result is 0x7f on channels 6
and below. Using 0x2 fixes it.

Hardware: Netgear WNDA4100 (USB 0846:9013, RT3593 rev 0402, RF3053)

Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
---
RFC for this since I am not sure if it is a generic fix, since the
vendor driver also doesn't use VCO_IC=0x2.
Is this also a known issue?

Testing on different hardware would be appreciated.

 drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 2e2e382b62475..4a44a0222210d 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -2979,7 +2979,7 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
 
 	rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
 	if (rf->channel >= 1 && rf->channel <= 14)
-		rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1);
+		rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
 	else if (rf->channel >= 36 && rf->channel <= 64)
 		rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
 	else if (rf->channel >= 100 && rf->channel <= 128)

base-commit: af32da41b0327b9c6a37856ba82b6760d6c8d10e
-- 
2.55.0

Re: [RFC PATCH] wifi: rt2x00: use VCO_IC 0x2 for RF3053 on 2.4 GHz

[Stanislaw Gruszka]

Hi

On Mon, Oct 12, 2026 at 09:37:27PM +0800, Ho Jie Feng wrote:
> Using the 0x1, the VCO calibration result is 0x7f on channels 6
> and below. Using 0x2 fixes it.
>
> Hardware: Netgear WNDA4100 (USB 0846:9013, RT3593 rev 0402, RF3053)
> 
> Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
> ---
> RFC for this since I am not sure if it is a generic fix, since the
> vendor driver also doesn't use VCO_IC=0x2.
> Is this also a known issue?

Could you elaborate what is the issue and what you mean by
"VCO calibration result is 0x7f" ?

Regards
Stanislaw

> Testing on different hardware would be appreciated.
> 
>  drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> index 2e2e382b62475..4a44a0222210d 100644
> --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> @@ -2979,7 +2979,7 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
>  
>  	rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
>  	if (rf->channel >= 1 && rf->channel <= 14)
> -		rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1);
> +		rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
>  	else if (rf->channel >= 36 && rf->channel <= 64)
>  		rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
>  	else if (rf->channel >= 100 && rf->channel <= 128)
> 
> base-commit: af32da41b0327b9c6a37856ba82b6760d6c8d10e
> -- 
> 2.55.0
> 

Re: [RFC PATCH] wifi: rt2x00: use VCO_IC 0x2 for RF3053 on 2.4 GHz

[Jie Feng]

On Tue, 13 Oct 2026 at 18:23, Stanislaw Gruszka <stf_xl@wp.pl> wrote:
>
> Hi
>
> On Mon, Oct 12, 2026 at 09:37:27PM +0800, Ho Jie Feng wrote:
> > Using the 0x1, the VCO calibration result is 0x7f on channels 6
> > and below. Using 0x2 fixes it.
> >
> > Hardware: Netgear WNDA4100 (USB 0846:9013, RT3593 rev 0402, RF3053)
> >
> > Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
> > ---
> > RFC for this since I am not sure if it is a generic fix, since the
> > vendor driver also doesn't use VCO_IC=0x2.
> > Is this also a known issue?
>
> Could you elaborate what is the issue and what you mean by
> "VCO calibration result is 0x7f" ?'
I had accidentally left the description out, sorry about that.

The adapter doesn't work on the lower channels in 2.4GHz,
channels 8 and below. This looked like an issue with
the PLL or something after debugging.

By tuning to channels 1-12 and using the debugfs to dump the
RFCSR registers, RFCSR4 is always 0x7f on the failing channels
consistently. Since there is code to switch RFCSR6 based on
channel, I tried the same as the 5GHz code to switch RFCSR6=0x2
for lower channels and it worked on all the channels surprisingly.

Due to the behaviour of RFCSR4, I think it is a VCO calibration
result since it seems to change after enabling the calibration.

I could not find any mention of this issue elsewhere, and suspect
either this hardware has very few Linux users or my hardware
is special in some way, so I can't guarantee that setting
it to 0x2 will work with another device even if it is the
same WNDA4100 model and chipset, so some testing would
be appreciated.

> Regards
> Stanislaw
>
> > Testing on different hardware would be appreciated.
> >
> >  drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> > index 2e2e382b62475..4a44a0222210d 100644
> > --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> > +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
> > @@ -2979,7 +2979,7 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
> >
> >       rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
> >       if (rf->channel >= 1 && rf->channel <= 14)
> > -             rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 1);
> > +             rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
> >       else if (rf->channel >= 36 && rf->channel <= 64)
> >               rt2x00_set_field8(&rfcsr, RFCSR6_VCO_IC, 2);
> >       else if (rf->channel >= 100 && rf->channel <= 128)
> >
> > base-commit: af32da41b0327b9c6a37856ba82b6760d6c8d10e
> > --
> > 2.55.0
> >