Linux wireless drivers development
 help / color / mirror / Atom feed
* [PATCH] wifi: mac80211: reject zero or oversized fq_quantum in aqm debugfs
@ 2026-11-19 17:14 Andrey Misiurov
  0 siblings, 0 replies; only message in thread
From: Andrey Misiurov @ 2026-11-19 17:14 UTC (permalink / raw)
  To: Johannes Berg
  Cc: Toke Høiland-Jørgensen, linux-wireless, linux-kernel,
	Andrey Misiurov

The aqm debugfs file lets you set fq.quantum, the byte budget a flow gets
each round in the transmit scheduler. aqm_write() accepts any u32 with no
check.

The scheduler keeps draining a flow until its budget runs out. A quantum of
0, or one above INT_MAX, makes that budget never go positive -- it stays 0,
or wraps negative in the signed counter. The loop then never moves on: it
spins forever holding fq->lock, and the first frame sent hangs the CPU:

  watchdog: BUG: soft lockup - CPU#1 stuck for 145s! [kworker/1:1]
  CPU: 1 PID: 22249 Comm: kworker/1:1
  Workqueue: mld mld_ifc_work
  RIP: 0010:__list_del_entry_valid+0x21/0x100
  Call Trace:
   fq_tin_dequeue.constprop.0+0x426/0x8d0 [mac80211]
   ieee80211_tx_dequeue+0x817/0x15d0 [mac80211]
   ieee80211_handle_wake_tx_queue+0x1ae/0x2a0 [mac80211]
   drv_wake_tx_queue+0x1a3/0x350 [mac80211]
   ieee80211_queue_skb+0x302/0x610 [mac80211]
   ieee80211_tx+0x261/0x3e0 [mac80211]
   ieee80211_xmit+0x18c/0x280 [mac80211]
   __ieee80211_subif_start_xmit+0x5a3/0xb90 [mac80211]
   ieee80211_subif_start_xmit+0xe2/0x7f0 [mac80211]
   dev_hard_start_xmit+0x157/0x420
   __dev_queue_xmit+0x1116/0x1770
   neigh_resolve_output+0x472/0x9c0
   ip6_finish_output2+0x87f/0x1320
   ip6_output+0x1dd/0x630
   mld_sendpack+0x94c/0xd40
   mld_ifc_work+0x42/0x270
   process_one_work+0x830/0x1330
   worker_thread+0x4f3/0xb40
   kthread+0x32a/0x410
   ret_from_fork+0x2c/0x50

The same lockup was fixed for the netlink knob by d1cba2ea8121, which caps it
at INT_MAX; the debugfs knob was left unchecked (netlink also cannot set 0,
where 0 means "keep"). The file is root-only (0600), so this is hardening.

Fix: read the value into a local and accept only 1..INT_MAX.

Fixes: 9399b86c0e9a ("mac80211: add debug knobs for fair queuing")
Signed-off-by: Andrey Misiurov <amisiurov@cloudlinux.com>
---
Found while reviewing a backport.

Reproduced on almalinux9 5.14.0-503.11.1 debug over mac80211_hwsim: writing
'fq_quantum 0' is accepted and the next TX wedges a CPU as above; with the
fix 'fq_quantum 0' and 2147483648 both return -EINVAL and TX keeps running.

 net/mac80211/debugfs.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -117,6 +117,7 @@
 {
 	struct ieee80211_local *local = file->private_data;
 	char buf[100];
+	u32 quantum;
 
 	if (count >= sizeof(buf))
 		return -EINVAL;
@@ -133,8 +134,12 @@
 		return count;
 	else if (sscanf(buf, "fq_memory_limit %u", &local->fq.memory_limit) == 1)
 		return count;
-	else if (sscanf(buf, "fq_quantum %u", &local->fq.quantum) == 1)
+	else if (sscanf(buf, "fq_quantum %u", &quantum) == 1) {
+		if (!quantum || quantum > INT_MAX)
+			return -EINVAL;
+		local->fq.quantum = quantum;
 		return count;
+	}
 
 	return -EINVAL;
 }

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2026-11-19 17:14 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-19 17:14 [PATCH] wifi: mac80211: reject zero or oversized fq_quantum in aqm debugfs Andrey Misiurov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox