From: Sander Eikelenboom <linux@eikelenboom.it>
To: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Cc: linux-wireless@vger.kernel.org, johannes@sipsolutions.net,
<mcgrof@do-not-panic.com>, <collen@cozybit.com>
Subject: Re: [RFC/RFT] cfg80211: reg: track crda request
Date: Fri, 11 Apr 2014 19:21:10 +0200 [thread overview]
Message-ID: <2710039777.20140411192110@eikelenboom.it> (raw)
In-Reply-To: <1397219374-3280-1-git-send-email-janusz.dziedzic@tieto.com>
Friday, April 11, 2014, 2:29:34 PM, you wrote:
> Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
> ---
> This is instead of:
> cfg80211: fix processing world regdomain when non modular
> @Sander @Colleen - could you chec this one?
I applied this as a single patch onto 3.15-mergewindow and this one doesn't work
for me (Luis patchset does work for me), somehow it doesn't seem to be able to set the initial domain:
[ 8.492292] libipw: 802.11 data/management/control stack, git-1.1.13
[ 8.492293] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 8.492293] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 8.492293] Copyright(c) 2003- 2014 Intel Corporation
[ 8.656243] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 8.656244] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 8.656267] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 8.656268] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 8.656282] xen_netfront: Initialising Xen virtual ethernet driver
[ 8.656768] iwlwifi 0000:00:05.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 8.656781] iwlwifi 0000:00:05.0: CONFIG_IWLWIFI_DEBUG disabled
[ 8.656783] iwlwifi 0000:00:05.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 8.656784] iwlwifi 0000:00:05.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 8.656786] iwlwifi 0000:00:05.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 8.657277] iwlwifi 0000:00:05.0: L1 Disabled; Enabling L0S
[ 8.748141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.748142] ehci-pci: EHCI PCI platform driver
[ 8.748168] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.748177] ohci-pci: OHCI PCI platform driver
[ 8.748193] ohci-platform: OHCI generic platform driver
[ 8.748208] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.851536] usbcore: registered new interface driver usb-storage
[ 8.851582] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 8.857493] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.857500] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.857587] hv_vmbus: registering driver hyperv_keyboard
[ 8.857689] mousedev: PS/2 mouse device common for all mice
[ 8.860082] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 8.861546] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 8.861634] rtc_cmos 00:04: alarms up to one day, 114 bytes nvram, hpet irqs
[ 8.861839] i2c /dev entries driver
[ 8.862186] piix4_smbus 0000:00:01.3: SMBus Host Controller not enabled!
[ 8.862241] pps_ldisc: PPS line discipline registered
[ 8.865539] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 8.865600] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.865609] iTCO_vendor_support: vendor-support=0
[ 8.865610] xen_wdt: Xen WatchDog Timer Driver v0.01
[ 8.865692] xen_wdt: initialized (timeout=60s, nowayout=0)
[ 8.865701] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[ 8.865702] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[ 8.865742] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 9.207187] device-mapper: uevent: version 1.0.3
[ 9.488036] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 9.887271] device-mapper: multipath: version 1.7.0 loaded
[ 9.887274] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 10.179352] leds_ss4200: no LED devices found
[ 10.179378] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.179529] usbcore: registered new interface driver usbhid
[ 10.179529] usbhid: USB HID core driver
[ 10.179534] hv_utils: Registering HyperV Utility Driver
[ 10.179536] hv_vmbus: registering driver hv_util
[ 10.179612] usbcore: registered new interface driver snd-usb-audio
[ 10.179626] usbcore: registered new interface driver snd-ua101
[ 10.179641] usbcore: registered new interface driver snd-usb-usx2y
[ 10.179657] usbcore: registered new interface driver snd-usb-us122l
[ 10.179674] usbcore: registered new interface driver snd-usb-caiaq
[ 10.179696] usbcore: registered new interface driver snd-usb-6fire
[ 10.179713] usbcore: registered new interface driver snd-usb-hiface
[ 10.179721] drop_monitor: Initializing network drop monitor service
[ 10.179745] GACT probability on
[ 10.179746] Mirror/redirect action on
[ 10.179748] Simple TC action Loaded
[ 10.179877] netem: version 1.3
[ 10.179878] u32 classifier
[ 10.179879] Performance counters on
[ 10.179879] input device check on
[ 10.179879] Actions configured
[ 10.179883] Netfilter messages via NETLINK v0.30.
[ 10.179886] nfnl_acct: registering with nfnetlink.
[ 10.179895] nf_conntrack version 0.5.0 (3812 buckets, 15248 max)
[ 10.363970] ctnetlink v0.93: registering with nfnetlink.
[ 10.721587] xt_time: kernel timezone is -0000
[ 10.721589] ip_set: protocol 6
[ 10.721595] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 10.815483] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 10.815524] IPVS: Creating netns size=2048 id=0
[ 10.815536] IPVS: ipvs loaded.
[ 10.815537] IPVS: [rr] scheduler registered.
[ 10.815538] IPVS: [wrr] scheduler registered.
[ 10.815539] IPVS: [lc] scheduler registered.
[ 10.815539] IPVS: [wlc] scheduler registered.
[ 10.815543] IPVS: [lblc] scheduler registered.
[ 10.815545] IPVS: [lblcr] scheduler registered.
[ 10.815546] IPVS: [dh] scheduler registered.
[ 10.815546] IPVS: [sh] scheduler registered.
[ 10.815547] IPVS: [sed] scheduler registered.
[ 10.815547] IPVS: [nq] scheduler registered.
[ 10.815639] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.815699] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 10.815714] arp_tables: (C) 2002 David S. Miller
[ 10.815732] TCP: cubic registered
[ 10.815733] Initializing XFRM netlink socket
[ 10.815738] NET: Registered protocol family 17
[ 10.815744] NET: Registered protocol family 15
[ 10.903989] Ebtables v2.0 registered
[ 16.972127] random: nonblocking pool is initialized
[ 18.164092] [sched_delayed] sched: RT throttling activated
[ 18.219157] cfg80211: Calling CRDA to update world regulatory domain
[ 18.300211] NET: Registered protocol family 33
[ 18.369824] Key type rxrpc registered
[ 18.422370] Key type rxrpc_s registered
[ 18.473663] 8021q: 802.1Q VLAN Support v1.8
[ 18.523017] lib80211: common routines for IEEE802.11 drivers
[ 18.574402] Key type dns_resolver registered
[ 18.622013] openvswitch: Open vSwitch switching datapath
[ 18.674762] registered taskstats version 1
[ 18.732965] Btrfs loaded
[ 18.791101] xenbus_probe_frontend: Device with no driver: device/vkbd/0
[ 18.852883] xenbus_probe_frontend: Device with no driver: device/pci/0
[ 18.905176] console [netcon0] enabled
[ 18.958757] netconsole: network logging started
[ 19.026602] rtc_cmos 00:04: setting system clock to 2014-04-11 19:11:51 UTC (1397243511)
[ 19.148159] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 19.221561] EDD information not available.
[ 19.297754] ALSA device list:
[ 19.367650] No soundcards found.
[ 19.437876] Freeing unused kernel memory: 1140K (ffffffff81f2b000 - ffffffff82048000)
[ 19.576458] Write protecting the kernel read-only data: 14336k
[ 19.654147] Freeing unused kernel memory: 844K (ffff88000192d000 - ffff880001a00000)
[ 19.808901] Freeing unused kernel memory: 296K (ffff880001db6000 - ffff880001e00000)
Loading, please wait...
[ 19.974135] udevd[181]: starting version 175
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Volume group "creabox" not found
Skipping volume group creabox
Unable to find LVM volume creabox/creabox_swap
done.
Begin: Running /scripts/local-premount ... done.
[ 20.259586] EXT4-fs (xvda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 20.425150] EXT4-fs (xvda2): mounted filesystem without journal. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
procd: Console is alive
procd: - watchdog -
procd: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 21.428177] cfg80211: Calling CRDA to update world regulatory domain
mount_root: mounting /dev/root
[ 23.681772] EXT4-fs (xvda2): re-mounted. Opts: (null)
mount: mounting 1 on /mnt failed: No such file or directory
mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory
umount: can't umount /mnt: Invalid argument
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[ 24.676227] cfg80211: Calling CRDA to update world regulatory domain
procd: - init complete -
[ 25.743753] device eth0 entered promiscuous mode
[ 25.837701] br-lan: port 1(eth0) entered forwarding state
[ 25.927344] br-lan: port 1(eth0) entered forwarding state
[ 27.112645] iwlwifi 0000:00:05.0: L1 Disabled; Enabling L0S
[ 27.213610] iwlwifi 0000:00:05.0: Radio type=0x2-0x1-0x0
[ 27.588361] iwlwifi 0000:00:05.0: L1 Disabled; Enabling L0S
[ 27.704274] iwlwifi 0000:00:05.0: Radio type=0x2-0x1-0x0
[ 27.882909] device wlan0 entered promiscuous mode
[ 27.988091] cfg80211: Calling CRDA to update world regulatory domain
[ 29.094996] br-lan: port 2(wlan0) entered forwarding state
[ 29.208669] br-lan: port 2(wlan0) entered forwarding state
[ 31.228267] cfg80211: Calling CRDA to update world regulatory domain
[ 34.468228] cfg80211: Calling CRDA to update world regulatory domain
[ 37.724294] cfg80211: Calling CRDA to update world regulatory domain
[ 40.956212] br-lan: port 1(eth0) entered forwarding state
[ 40.972164] cfg80211: Calling CRDA to update world regulatory domain
[ 44.124328] cfg80211: Calling CRDA to update world regulatory domain
[ 44.252127] br-lan: port 2(wlan0) entered forwarding state
[ 47.364252] cfg80211: Calling CRDA to update world regulatory domain
[ 50.604271] cfg80211: Calling CRDA to update world regulatory domain
[ 53.836240] cfg80211: Calling CRDA to update world regulatory domain
<big snip>
[ 221.132223] cfg80211: Calling CRDA to update world regulatory domain
[ 224.332269] cfg80211: Calling CRDA to update world regulatory domain
[ 227.532277] cfg80211: Calling CRDA to update world regulatory domain
[ 230.748282] cfg80211: Calling CRDA to update world regulatory domain
BusyBox v1.19.4 (2014-01-09 04:48:06 MST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r39211)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/# iw reg get
country 00: DFS-UNSET
(2402 - 2472 @ 40), (6, 20)
(2457 - 2482 @ 40), (6, 20), PASSIVE-SCAN
(2474 - 2494 @ 20), (6, 20), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 160), (6, 20), PASSIVE-SCAN
(5250 - 5330 @ 160), (6, 20), DFS, PASSIVE-SCAN
(5490 - 5730 @ 160), (6, 20), DFS, PASSIVE-SCAN
next prev parent reply other threads:[~2014-04-11 17:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-11 12:29 [RFC/RFT] cfg80211: reg: track crda request Janusz Dziedzic
2014-04-11 14:44 ` Sander Eikelenboom
2014-04-11 17:21 ` Sander Eikelenboom [this message]
2014-04-11 19:55 ` Janusz Dziedzic
2014-04-11 20:09 ` Sander Eikelenboom
2014-04-11 20:13 ` Johannes Berg
2014-04-11 20:16 ` Sander Eikelenboom
2014-04-12 18:49 ` Sander Eikelenboom
2014-04-14 19:58 ` Colleen T
2014-04-13 9:30 ` Arik Nemtsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2710039777.20140411192110@eikelenboom.it \
--to=linux@eikelenboom.it \
--cc=collen@cozybit.com \
--cc=janusz.dziedzic@tieto.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=mcgrof@do-not-panic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox