[PATCH] wifi: rtlwifi: rtl_usb: Store the endpoint addresses

[PATCH] wifi: rtlwifi: rtl_usb: Store the endpoint addresses

[Bitterblue Smith]

And use the stored addresses in rtl8192cu instead of hardcoding them.

This is what the vendor drivers do.

Perhaps this is not strictly necessary for RTL8192CU devices. However,
the dual mac version of RTL8192DU has two USB interfaces, each with its
own set of endpoints. Hardcoding their addresses in the upcoming
rtl8192du driver would require making some assumptions which I'm not
qualified to make.

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
 .../wireless/realtek/rtlwifi/rtl8192cu/sw.c   |  1 -
 .../wireless/realtek/rtlwifi/rtl8192cu/trx.c  | 77 ++++++++++---------
 .../wireless/realtek/rtlwifi/rtl8192cu/trx.h  |  1 -
 drivers/net/wireless/realtek/rtlwifi/usb.c    | 31 ++++++--
 drivers/net/wireless/realtek/rtlwifi/usb.h    |  2 +
 drivers/net/wireless/realtek/rtlwifi/wifi.h   |  1 -
 6 files changed, 68 insertions(+), 45 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
index 9f4cf09090d6..48be7e346efc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
@@ -145,7 +145,6 @@ MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
 
 static struct rtl_hal_usbint_cfg rtl92cu_interface_cfg = {
 	/* rx */
-	.in_ep_num = RTL92C_USB_BULK_IN_NUM,
 	.rx_urb_num = RTL92C_NUM_RX_URBS,
 	.rx_max_size = RTL92C_SIZE_MAX_RX_BUFFER,
 	.usb_rx_hdl = rtl8192cu_rx_hdl,
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
index cbbd1dab8af0..b8124b474646 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
@@ -79,68 +79,75 @@ static int configvernoutep(struct ieee80211_hw *hw)
 static void twooutepmapping(struct ieee80211_hw *hw, bool is_chip8,
 			     bool  bwificfg, struct rtl_ep_map *ep_map)
 {
+	struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw);
+	struct rtl_usb *rtlusb = rtl_usbdev(usb_priv);
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 
 	if (bwificfg) { /* for WMM */
 		rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
 			"USB Chip-B & WMM Setting.....\n");
-		ep_map->ep_mapping[RTL_TXQ_BE]	= 2;
-		ep_map->ep_mapping[RTL_TXQ_BK]	= 3;
-		ep_map->ep_mapping[RTL_TXQ_VI]	= 3;
-		ep_map->ep_mapping[RTL_TXQ_VO] = 2;
-		ep_map->ep_mapping[RTL_TXQ_MGT] = 2;
-		ep_map->ep_mapping[RTL_TXQ_BCN] = 2;
-		ep_map->ep_mapping[RTL_TXQ_HI]	= 2;
+		ep_map->ep_mapping[RTL_TXQ_BE]	= rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_BK]	= rtlusb->out_eps[1];
+		ep_map->ep_mapping[RTL_TXQ_VI]	= rtlusb->out_eps[1];
+		ep_map->ep_mapping[RTL_TXQ_VO]	= rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_MGT] = rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_BCN] = rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_HI]	= rtlusb->out_eps[0];
 	} else { /* typical setting */
 		rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
 			"USB typical Setting.....\n");
-		ep_map->ep_mapping[RTL_TXQ_BE]	= 3;
-		ep_map->ep_mapping[RTL_TXQ_BK]	= 3;
-		ep_map->ep_mapping[RTL_TXQ_VI]	= 2;
-		ep_map->ep_mapping[RTL_TXQ_VO]	= 2;
-		ep_map->ep_mapping[RTL_TXQ_MGT] = 2;
-		ep_map->ep_mapping[RTL_TXQ_BCN] = 2;
-		ep_map->ep_mapping[RTL_TXQ_HI]	= 2;
+		ep_map->ep_mapping[RTL_TXQ_BE]	= rtlusb->out_eps[1];
+		ep_map->ep_mapping[RTL_TXQ_BK]	= rtlusb->out_eps[1];
+		ep_map->ep_mapping[RTL_TXQ_VI]	= rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_VO]	= rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_MGT] = rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_BCN] = rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_HI]	= rtlusb->out_eps[0];
 	}
 }
 
 static void threeoutepmapping(struct ieee80211_hw *hw, bool  bwificfg,
 			       struct rtl_ep_map *ep_map)
 {
+	struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw);
+	struct rtl_usb *rtlusb = rtl_usbdev(usb_priv);
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 
 	if (bwificfg) { /* for WMM */
 		rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
 			"USB 3EP Setting for WMM.....\n");
-		ep_map->ep_mapping[RTL_TXQ_BE]	= 5;
-		ep_map->ep_mapping[RTL_TXQ_BK]	= 3;
-		ep_map->ep_mapping[RTL_TXQ_VI]	= 3;
-		ep_map->ep_mapping[RTL_TXQ_VO]	= 2;
-		ep_map->ep_mapping[RTL_TXQ_MGT] = 2;
-		ep_map->ep_mapping[RTL_TXQ_BCN] = 2;
-		ep_map->ep_mapping[RTL_TXQ_HI]	= 2;
+		ep_map->ep_mapping[RTL_TXQ_BE]	= rtlusb->out_eps[2];
+		ep_map->ep_mapping[RTL_TXQ_BK]	= rtlusb->out_eps[1];
+		ep_map->ep_mapping[RTL_TXQ_VI]	= rtlusb->out_eps[1];
+		ep_map->ep_mapping[RTL_TXQ_VO]	= rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_MGT] = rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_BCN] = rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_HI]	= rtlusb->out_eps[0];
 	} else { /* typical setting */
 		rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
 			"USB 3EP Setting for typical.....\n");
-		ep_map->ep_mapping[RTL_TXQ_BE]	= 5;
-		ep_map->ep_mapping[RTL_TXQ_BK]	= 5;
-		ep_map->ep_mapping[RTL_TXQ_VI]	= 3;
-		ep_map->ep_mapping[RTL_TXQ_VO]	= 2;
-		ep_map->ep_mapping[RTL_TXQ_MGT] = 2;
-		ep_map->ep_mapping[RTL_TXQ_BCN] = 2;
-		ep_map->ep_mapping[RTL_TXQ_HI]	= 2;
+		ep_map->ep_mapping[RTL_TXQ_BE]	= rtlusb->out_eps[2];
+		ep_map->ep_mapping[RTL_TXQ_BK]	= rtlusb->out_eps[2];
+		ep_map->ep_mapping[RTL_TXQ_VI]	= rtlusb->out_eps[1];
+		ep_map->ep_mapping[RTL_TXQ_VO]	= rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_MGT] = rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_BCN] = rtlusb->out_eps[0];
+		ep_map->ep_mapping[RTL_TXQ_HI]	= rtlusb->out_eps[0];
 	}
 }
 
 static void oneoutepmapping(struct ieee80211_hw *hw, struct rtl_ep_map *ep_map)
 {
-	ep_map->ep_mapping[RTL_TXQ_BE]	= 2;
-	ep_map->ep_mapping[RTL_TXQ_BK]	= 2;
-	ep_map->ep_mapping[RTL_TXQ_VI]	= 2;
-	ep_map->ep_mapping[RTL_TXQ_VO] = 2;
-	ep_map->ep_mapping[RTL_TXQ_MGT] = 2;
-	ep_map->ep_mapping[RTL_TXQ_BCN] = 2;
-	ep_map->ep_mapping[RTL_TXQ_HI]	= 2;
+	struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw);
+	struct rtl_usb *rtlusb = rtl_usbdev(usb_priv);
+
+	ep_map->ep_mapping[RTL_TXQ_BE]	= rtlusb->out_eps[0];
+	ep_map->ep_mapping[RTL_TXQ_BK]	= rtlusb->out_eps[0];
+	ep_map->ep_mapping[RTL_TXQ_VI]	= rtlusb->out_eps[0];
+	ep_map->ep_mapping[RTL_TXQ_VO]	= rtlusb->out_eps[0];
+	ep_map->ep_mapping[RTL_TXQ_MGT] = rtlusb->out_eps[0];
+	ep_map->ep_mapping[RTL_TXQ_BCN] = rtlusb->out_eps[0];
+	ep_map->ep_mapping[RTL_TXQ_HI]	= rtlusb->out_eps[0];
 }
 
 static int _out_ep_mapping(struct ieee80211_hw *hw)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.h
index caeebe4480ff..09e61dc0f317 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.h
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.h
@@ -4,7 +4,6 @@
 #ifndef __RTL92CU_TRX_H__
 #define __RTL92CU_TRX_H__
 
-#define RTL92C_USB_BULK_IN_NUM			1
 #define RTL92C_NUM_RX_URBS			8
 #define RTL92C_NUM_TX_URBS			32
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 1fc480fe18ad..6e8c87a2fae4 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -216,7 +216,6 @@ static int _rtl_usb_init_rx(struct ieee80211_hw *hw)
 
 	rtlusb->rx_max_size = rtlpriv->cfg->usb_interface_cfg->rx_max_size;
 	rtlusb->rx_urb_num = rtlpriv->cfg->usb_interface_cfg->rx_urb_num;
-	rtlusb->in_ep = rtlpriv->cfg->usb_interface_cfg->in_ep_num;
 	rtlusb->usb_rx_hdl = rtlpriv->cfg->usb_interface_cfg->usb_rx_hdl;
 	rtlusb->usb_rx_segregate_hdl =
 		rtlpriv->cfg->usb_interface_cfg->usb_rx_segregate_hdl;
@@ -248,20 +247,38 @@ static int _rtl_usb_init(struct ieee80211_hw *hw)
 
 		pep_desc = &usb_intf->cur_altsetting->endpoint[epidx].desc;
 
-		if (usb_endpoint_dir_in(pep_desc))
+		if (usb_endpoint_dir_in(pep_desc)) {
+			if (usb_endpoint_xfer_bulk(pep_desc)) {
+				/* The vendor drivers assume there is only one
+				 * bulk in ep and that it's the first in ep.
+				 */
+				if (rtlusb->in_ep_nums == 0)
+					rtlusb->in_ep = usb_endpoint_num(pep_desc);
+				else
+					pr_warn("%s: bulk in endpoint is not the first in endpoint\n",
+						__func__);
+			}
+
 			rtlusb->in_ep_nums++;
-		else if (usb_endpoint_dir_out(pep_desc))
+		} else if (usb_endpoint_dir_out(pep_desc)) {
+			if (rtlusb->out_ep_nums < RTL_USB_MAX_BULKOUT_NUM) {
+				if (usb_endpoint_xfer_bulk(pep_desc))
+					rtlusb->out_eps[rtlusb->out_ep_nums] =
+							usb_endpoint_num(pep_desc);
+			} else {
+				pr_warn("%s: found more bulk out endpoints than the expected %d\n",
+					__func__, RTL_USB_MAX_BULKOUT_NUM);
+			}
+
 			rtlusb->out_ep_nums++;
+		}
 
 		rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
 			"USB EP(0x%02x), MaxPacketSize=%d, Interval=%d\n",
 			pep_desc->bEndpointAddress, pep_desc->wMaxPacketSize,
 			pep_desc->bInterval);
 	}
-	if (rtlusb->in_ep_nums <  rtlpriv->cfg->usb_interface_cfg->in_ep_num) {
-		pr_err("Too few input end points found\n");
-		return -EINVAL;
-	}
+
 	if (rtlusb->out_ep_nums == 0) {
 		pr_err("No output end points found\n");
 		return -EINVAL;
diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.h b/drivers/net/wireless/realtek/rtlwifi/usb.h
index 3bf85b23eec1..12529afc0510 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.h
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.h
@@ -19,6 +19,7 @@
 
 #define RTL_USB_MAX_TXQ_NUM		4		/* max tx queue */
 #define RTL_USB_MAX_EP_NUM		6		/* max ep number */
+#define RTL_USB_MAX_BULKOUT_NUM		4
 #define RTL_USB_MAX_TX_URBS_NUM		8
 
 enum rtl_txq {
@@ -94,6 +95,7 @@ struct rtl_usb {
 
 	/* Tx */
 	u8 out_ep_nums ;
+	u8 out_eps[RTL_USB_MAX_BULKOUT_NUM];
 	u8 out_queue_sel;
 	struct rtl_ep_map ep_map;
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h
index b65d54115eac..f388d13e2ba8 100644
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -2353,7 +2353,6 @@ struct rtl_mod_params {
 
 struct rtl_hal_usbint_cfg {
 	/* data - rx */
-	u32 in_ep_num;
 	u32 rx_urb_num;
 	u32 rx_max_size;
 
-- 
2.43.0

RE: [PATCH] wifi: rtlwifi: rtl_usb: Store the endpoint addresses

[Ping-Ke Shih]

> -----Original Message-----
> From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
> Sent: Tuesday, February 13, 2024 10:33 PM
> To: linux-wireless@vger.kernel.org
> Cc: Ping-Ke Shih <pkshih@realtek.com>; Larry Finger <Larry.Finger@lwfinger.net>
> Subject: [PATCH] wifi: rtlwifi: rtl_usb: Store the endpoint addresses
> 
> And use the stored addresses in rtl8192cu instead of hardcoding them.
> 
> This is what the vendor drivers do.
> 
> Perhaps this is not strictly necessary for RTL8192CU devices. However,
> the dual mac version of RTL8192DU has two USB interfaces, each with its
> own set of endpoints. Hardcoding their addresses in the upcoming
> rtl8192du driver would require making some assumptions which I'm not
> qualified to make.
> 
> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>

Though I'm not familiar with endpoints of USB, patch makes sense to me

Acked-by: Ping-Ke Shih <pkshih@realtek.com>

Re: [PATCH] wifi: rtlwifi: rtl_usb: Store the endpoint addresses

[Kalle Valo]

Bitterblue Smith <rtl8821cerfe2@gmail.com> wrote:

> And use the stored addresses in rtl8192cu instead of hardcoding them.
> 
> This is what the vendor drivers do.
> 
> Perhaps this is not strictly necessary for RTL8192CU devices. However,
> the dual mac version of RTL8192DU has two USB interfaces, each with its
> own set of endpoints. Hardcoding their addresses in the upcoming
> rtl8192du driver would require making some assumptions which I'm not
> qualified to make.
> 
> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
> Acked-by: Ping-Ke Shih <pkshih@realtek.com>

Patch applied to wireless-next.git, thanks.

42ffccd0a36e wifi: rtlwifi: rtl_usb: Store the endpoint addresses

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/7b6a602a-6101-4bab-958d-bcff4d565b40@gmail.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches