* Re: bump
2024-03-20 10:41 ` bump Arend van Spriel
2024-03-20 10:51 ` bump Arend van Spriel
@ 2024-03-20 21:20 ` Hranislav Milenkovic
2024-03-23 19:40 ` bump Arend van Spriel
1 sibling, 1 reply; 5+ messages in thread
From: Hranislav Milenkovic @ 2024-03-20 21:20 UTC (permalink / raw)
To: Arend van Spriel, Sebastian Gottschall; +Cc: brcm80211, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 9685 bytes --]
Hi Arend, thank you for responding to my mail.
To answer you, I use both ddwrt and openwrt even. Both of them have problems with this chipset.
1) Openwrt stalls sometimes described here https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432 has problem with weak siignal on 5 ghz and doesn't show signal level because of BRCMF_FEAT_DUMP_OBSS is disabled described here https://github.com/openwrt/openwrt/issues/13903
2) ddwrt (brcmfamc version) has great signal strenght, shows signal levels but crashes all the time and basic functions like su-beamformee doesn't work with 43602
I attached as many info as I could get like hostapd.conf, dmesg, build versions/branch but commad you asked for f in brcmfmac43602-pcie.*; do strings $f | tail -1; output nothing both on openwrt and ddwrt...
Hranislav Milenkovic
+381 (0)65 2026199
Sent with Proton Mail secure email.
On Wednesday, March 20th, 2024 at 11:41 AM, Arend van Spriel <arend.vanspriel@broadcom.com> wrote:
> On 3/7/2024 7:53 AM, Hranislav Milenkovic wrote:
>
> > Hi Arend, couple years later same question... can these crashes be
> > fixed... who maintains chipset firmware for 43602... I get it for
> > brcmfmac but who maintains firmwares from here
> > https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/ https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/
>
>
> Hi Hranislav,
>
> The firmware repo is maintained by kernel.org. Regarding the firmwares
> for the brcm chips these have been submitted by Broadcom. The 43602 is
> EOL so there will be no regular releases. Can you provide hardware
> configuration details for your platform.
>
> The firmware repo has two firmware files for 43602:
>
> -rw-r--r-- brcmfmac43602-pcie.ap.bin 595472
> -rw-r--r-- brcmfmac43602-pcie.bin 635449
>
> Which one are you using?
>
> > I have some crashes if you are interested (also have you seen this
> > bugreport
> > https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432
> > https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432)
>
>
> You made me look. So are you using OpenWrt? What release/branch are you
> using?
>
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.722477] ieee80211 phy0:
> > brcmf_fw_crashed: Firmware has halted or crashed
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.729587] 0001:01:00.0:
> > CONSOLE: 005280.898
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.734051] 0001:01:00.0:
> > CONSOLE: FWID 01-f458629d
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.739004] 0001:01:00.0:
> > CONSOLE: flags 110005
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.743562] 0001:01:00.0:
> > CONSOLE: 005280.898
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.748079] 0001:01:00.0:
> > CONSOLE: TRAP 7(26fea8): pc 1871d6, lr 1867e9, sp 26ff00, cpsr 800001df,
> > spsr 800001bf
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.758362] 0001:01:00.0:
> > CONSOLE: 005280.898 r0 1000000, r1 40000000, r2 40, r3 1, r4 1fc8d8,
> > r5 26af20, r6 25f2d4
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.769074] 0001:01:00.0:
> > CONSOLE: 005280.898 r7 25eab4, r8 25f2dc, r9 0, r10 bf3c0282, r11
> > db1d6d6c, r12 6038120
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.779551] 0001:01:00.0:
> > CONSOLE: 005280.898
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.784043] 0001:01:00.0:
> > CONSOLE: sp+0 00000000 0026af20 00000000 0018861d
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.791385] 0001:01:00.0:
> > CONSOLE: 005280.898 sp+10 00000000 0025f3c0 00000000 0018078c
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.799596] 0001:01:00.0:
> > CONSOLE:
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.803114] 0001:01:00.0:
> > CONSOLE: 005280.898 sp+c 0018861d
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.808743] 0001:01:00.0:
> > CONSOLE: 005280.898 sp+2c 00006fc7
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.814441] 0001:01:00.0:
> > CONSOLE: 005280.898 sp+30 00006f9d
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.820146] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+3c 00007005
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.825842] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+4c 00007243
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.831544] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+5c 00183825
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.837236] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+70 001837f9
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.842937] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+8c 001823d7
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.848640] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+98 000001df
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.854329] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+d8 000071df
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.860032] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+e8 00188e59
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.797981] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.805670] brcmfmac:
> > brcmf_cfg80211_stop_ap: bss_enable config failed -5
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.812497] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.820190] ieee80211 phy0:
> > brcmf_cfg80211_stop_ap: SET SSID error (-5)
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.826827] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.834521] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.842213] brcmfmac:
> > brcmf_cfg80211_stop_ap: wl apsta failed (-5)
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.848420] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.856098] ieee80211 phy0:
> > brcmf_cfg80211_stop_ap: BRCMF_C_DOWN error -5
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.864446] br0: port
> > 4(wlan0) entered disabled state
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.870425] device wlan0 left
> > promiscuous mode
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.874923] br0: port
> > 4(wlan0) entered disabled state
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5286.417713] brcmfmac:
> > brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5286.428364] brcmfmac
> > 0001:01:00.0: Direct firmware load for �H0^[�
> > �\\v`�\x04`�dp^[�`0\v�y�\x03�H0^[�\\`\v�\x04`�dp^[�`0\v�r�\x04 failed with error -2
>
>
> Not sure why this is all garbled. Can image there is not file with that
> name though ;-) Above seems the driver attempts to recover from the
> firmware crash. I can take a look at the firmware crash and the recovery
> mechanism in the driver.
>
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5286.441255] brcmfmac
> > 0001:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt
> > failed with error -2
> > Mar 05 19:13:25 178.220.177.32 kernel [ 5289.150530] BUG: Bad page
> > state in process modprobe pfn:07150
> > Mar 05 19:13:25 178.220.177.32 kernel [ 5289.156407] page:86cb6f40
> > count:-1 mapcount:0 mapping: (null) index:0x0
> > Mar 05 19:13:25 178.220.177.32 kernel [ 5289.163118] flags: 0x0()
> > Mar 05 19:13:25 178.220.177.32 kernel [ 5289.165660] page dumped
> > because: nonzero _count
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.171893] 0002:03:00.0:
> > CONSOLE: 041746.172 ucode revision 986.128
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.178467] 0002:03:00.0:
> > CONSOLE: 041746.172 wl0: PSM microcode watchdog fired at 41733 (seconds)
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.187768] 0002:03:00.0:
> > CONSOLE: 041746.172 wl0: psmdebug 0x00ec8111, phydebug 0x00000048,
> > psm_brc 0x0501 psm_brc_1 0x0000maccontrol 0x84160403 ifsstat 0x00af
> > m_cts_duration 0x0000 m_ucode_dbgst 0x0002
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.206038] 0002:03:00.0:
> > CONSOLE: 041746.172 wepctl 0x0050 wepstat 0x0000 wep_hdrloc 0x001e
> > wep_psdulen 281
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.216025] 0002:03:00.0:
> > CONSOLE: 041746.172 RXE_RXCNT: 0x011f DAGG: ctl: 0x0000, bleft:
> > 0x0096
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.225523] 0002:03:00.0:
> > CONSOLE: offs: 0x000c, stat: 0x1056, len: 0x0000
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.232995] 0002:03:00.0:
> > CONSOLE: 041746.172 M_RXFRM_BLK scr(0:63) btc_params(0:63) phydebug PC
> > ampdu clk off
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.243076] 0002:03:00.0:
> > CONSOLE: 041746.172 wlc_dump_aggfifo:
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.249089] 0002:03:00.0:
> > CONSOLE: 041746.172 framerdy 0x0 bmccmd 7 framecnt 1024
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.256822] 0002:03:00.0:
> > CONSOLE: 041746.172 AQM agg params 0xfc0 maxlen hi/lo 0x0 0xffff minlen
> > 0x0 adjlen 0x0
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.267153] 0002:03:00.0:
> > CONSOLE: 041746.172 AQM agg results 0x8001 len hi/lo: 0x0 0x22
> > BAbitmap(0-3) 0 0 0 0
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.277244] ieee80211 phy1:
> > brcmf_psm_watchdog_notify: PSM's watchdog has fired!
>
>
> The PSM watchdog means the microcode got stuck in a bad state. Getting
> microcode development involved in fixing this will prove difficult.
>
> Regards,
> Arend
[-- Attachment #2: Openwrt.snapshot.r25589.txt --]
[-- Type: text/plain, Size: 41181 bytes --]
[hranislav@toshiba-laptop ~]$ sudo ssh 192.168.1.1
[sudo] password for hranislav:
root@192.168.1.1's password:
BusyBox v1.36.1 (2024-03-16 23:19:22 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r25589-f84ed09d2c
-----------------------------------------------------
root@R8000:~# for f in brcmfmac43602-pcie.*; do strings $f | tail -1;
>
JUST BLANK SCREEN NO NOTHING NO MICROCODE VERSION
root@R8000:~# cat /tmp/run/hostapd-phy1.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=US
ieee80211d=1
hw_mode=g
supported_rates=60 90 120 180 240 360 480 540
basic_rates=60 120 240
beacon_int=100
channel=6
chanlist=6
#num_global_macaddr=1
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][SHORT-GI-20][DSSS_CCK-40]
interface=phy1-ap0
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
skip_inactivity_poll=0
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
utf8_ssid=1
multi_ap=0
wpa_passphrase=mojabeti12
wpa_psk_file=/var/run/hostapd-phy1-ap0.psk
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Marko&Pavle
bridge=br-lan
wds_bridge=
snoop_iface=br-lan
wpa_disable_eapol_key_retries=0
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
dynamic_vlan=0
vlan_naming=1
vlan_no_bridge=1
vlan_file=/var/run/hostapd-phy1-ap0.vlan
qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
bssid=2c:30:33:59:aa:68
#default_macaddr
root@R8000:~# cat /tmp/run/hostapd-phy0.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=US
ieee80211d=1
ieee80211h=1
hw_mode=a
beacon_int=100
channel=149
chanlist=149
tx_queue_data2_burst=2.0
#num_global_macaddr=1
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
ieee80211ac=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=155
vht_capab=[SHORT-GI-80][SU-BEAMFORMER][SU-BEAMFORMEE][SOUNDING-DIMENSION-3][BF-ANTENNA-3][MAX-A-MPDU-LEN-EXP0][VHT-LINK-ADAPT-3]
interface=phy0-ap0
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
skip_inactivity_poll=0
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
utf8_ssid=1
multi_ap=0
wpa_passphrase=mojabeti12
wpa_psk_file=/var/run/hostapd-phy0-ap0.psk
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Marko&Pavle
bridge=br-lan
wds_bridge=
snoop_iface=br-lan
wpa_disable_eapol_key_retries=0
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
dynamic_vlan=0
vlan_naming=1
vlan_no_bridge=1
vlan_file=/var/run/hostapd-phy0-ap0.vlan
qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
bssid=2c:30:33:59:aa:57
#default_macaddr
root@R8000:~# cat /tmp/run/hostapd-phy0.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=US
ieee80211d=1
ieee80211h=1
hw_mode=a
beacon_int=100
channel=149
chanlist=149
tx_queue_data2_burst=2.0
#num_global_macaddr=1
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
ieee80211ac=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=155
vht_capab=[SHORT-GI-80][SU-BEAMFORMER][SU-BEAMFORMEE][SOUNDING-DIMENSION-3][BF-ANTENNA-3][MAX-A-MPDU-LEN-EXP0][VHT-LINK-ADAPT-3]
interface=phy0-ap0
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
skip_inactivity_poll=0
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
utf8_ssid=1
multi_ap=0
wpa_passphrase=mojabeti12
wpa_psk_file=/var/run/hostapd-phy0-ap0.psk
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Marko&Pavle
bridge=br-lan
wds_bridge=
snoop_iface=br-lan
wpa_disable_eapol_key_retries=0
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
dynamic_vlan=0
vlan_naming=1
vlan_no_bridge=1
vlan_file=/var/run/hostapd-phy0-ap0.vlan
qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
bssid=2c:30:33:59:aa:57
#default_macaddr
root@R8000:~# cat /tmp/run/hostapd-phy2.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=US
ieee80211d=1
ieee80211h=1
hw_mode=a
beacon_int=100
channel=44
chanlist=44
tx_queue_data2_burst=2.0
#num_global_macaddr=1
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
ieee80211ac=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42
vht_capab=[SHORT-GI-80][SU-BEAMFORMER][SU-BEAMFORMEE][SOUNDING-DIMENSION-3][BF-ANTENNA-3][MAX-A-MPDU-LEN-EXP0][VHT-LINK-ADAPT-3]
interface=phy2-ap0
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
skip_inactivity_poll=0
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
utf8_ssid=1
multi_ap=0
wpa_passphrase=mojabeti12
wpa_psk_file=/var/run/hostapd-phy2-ap0.psk
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Marko&Pavle
bridge=br-lan
wds_bridge=
snoop_iface=br-lan
wpa_disable_eapol_key_retries=0
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
dynamic_vlan=0
vlan_naming=1
vlan_no_bridge=1
vlan_file=/var/run/hostapd-phy2-ap0.vlan
qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
bssid=2c:30:33:59:aa:79
#default_macaddr
root@R8000:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.150 (builder@buildhost) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 12.3.0 r25589-f84ed09d2c) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Mar 19 06:20:26 2024
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Netgear R8000 (BCM4709)
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] HighMem [mem 0x0000000008000000-0x000000008fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] node 0: [mem 0x0000000088000000-0x000000008fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000008fffffff]
[ 0.000000] percpu: Embedded 11 pages/cpu s16140 r8192 d20724 u45056
[ 0.000000] pcpu-alloc: s16140 r8192 d20724 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65248
[ 0.000000] Kernel command line: console=ttyS0,115200
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 249464K/262144K available (6488K kernel code, 570K rwdata, 1480K rodata, 1024K init, 299K bss, 12680K reserved, 0K cma-reserved, 131072K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[ 0.000002] sched_clock: 64 bits at 500MHz, resolution 2ns, wraps every 4398046511103ns
[ 0.000026] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[ 0.000052] Switching to timer-based delay loop, resolution 2ns
[ 0.000333] Calibrating delay loop (skipped), value calculated using timer frequency.. 1000.00 BogoMIPS (lpj=5000000)
[ 0.000350] CPU: Testing write buffer coherency: ok
[ 0.000379] CPU0: Spectre v2: using BPIALL workaround
[ 0.000388] pid_max: default: 32768 minimum: 301
[ 0.000926] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000941] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.002283] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003017] Setting up static identity map for 0x100000 - 0x10003c
[ 0.003171] rcu: Hierarchical SRCU implementation.
[ 0.003493] smp: Bringing up secondary CPUs ...
[ 0.004108] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004123] CPU1: Spectre v2: using BPIALL workaround
[ 0.004226] smp: Brought up 1 node, 2 CPUs
[ 0.004240] SMP: Total of 2 processors activated (2000.00 BogoMIPS).
[ 0.004250] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
[ 0.004256] CPU: This may indicate a broken bootloader or firmware.
[ 0.007249] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.007279] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.007506] pinctrl core: initialized pinctrl subsystem
[ 0.008281] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.008897] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.009592] thermal_sys: Registered thermal governor 'step_wise'
[ 0.020393] clocksource: Switched to clocksource arm_global_timer
[ 0.021373] NET: Registered PF_INET protocol family
[ 0.021516] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.022022] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.022056] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.022071] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.022090] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.022113] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.022200] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.022236] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.022445] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.022484] PCI: CLS 0 bytes, default 64
[ 0.023385] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.026922] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.026945] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.027810] bounce: pool size: 64 pages
[ 0.027903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.030267] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.032267] printk: console [ttyS0] disabled
[ 0.032355] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 28, base_baud = 7812500) is a 16550
[ 0.555170] printk: console [ttyS0] enabled
[ 0.560350] bcm2835-rng 18004000.rng: hwrng registered
[ 0.691683] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 0.698072] nand: AMD/Spansion S34ML01G2
[ 0.702025] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.709637] iproc_nand 18028000.nand-controller: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
[ 0.720597] Scanning device for bad blocks
[ 0.962719] random: crng init done
[ 2.786066] 4 bcm47xxpart partitions found on MTD device brcmnand.0
[ 2.792379] Creating 4 MTD partitions on "brcmnand.0":
[ 2.797533] 0x000000000000-0x000000080000 : "boot"
[ 2.803048] 0x000000080000-0x000000200000 : "nvram"
[ 2.808601] 0x000000200000-0x000002600000 : "firmware"
[ 2.815209] 2 trx partitions found on MTD device firmware
[ 2.820661] Creating 2 MTD partitions on "firmware":
[ 2.825646] 0x00000000001c-0x000000400000 : "linux"
[ 2.830545] mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only
[ 2.840345] 0x000000400000-0x000002400000 : "ubi"
[ 2.845879] 0x000002600000-0x000008000000 : "board_data"
[ 2.853949] bcm_iproc 18029200.spi: using bspi-mspi mode
[ 2.861520] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
[ 2.869524] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
[ 2.877683] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 2.883937] bcma-host-soc 18000000.axi: bus0: Found chip with id 53010, rev 0x00 and package 0x00
[ 2.892962] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[ 2.903588] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 2.903601] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0)
[ 2.914370] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 2.914380] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
[ 2.924399] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 2.934858] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 2.945312] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 2.955766] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 2.966158] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 2.976725] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 2.987303] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 2.997907] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 2.997917] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
[ 3.009979] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
[ 3.020409] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
[ 3.030829] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.030838] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[ 3.041081] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.041092] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[ 3.051158] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.051168] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[ 3.062553] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.062563] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[ 3.075331] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.075341] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
[ 3.085442] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[ 3.097083] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.097093] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[ 3.108558] bcma-host-soc 18000000.axi: bus0: Flash type not supported
[ 3.133153] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 11 provided by platform.
[ 3.133451] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS)
[ 3.139061] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
[ 3.145645] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
[ 3.151953] bgmac_bcma bcma0:3: Using random MAC: 5a:e3:cf:c9:18:6f
[ 3.159448] b53-srab-switch b53-srab-switch: invalid resource
[ 3.165264] b53-srab-switch: probe of b53-srab-switch failed with error -22
[ 3.172963] bgmac_bcma bcma0:4: Found PHY addr: 30 (NOREGS)
[ 3.178577] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
[ 3.185142] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
[ 3.191440] bgmac_bcma bcma0:4: Using random MAC: 1e:67:d7:31:23:42
[ 3.199502] bgmac_bcma bcma0:5: Found PHY addr: 30 (NOREGS)
[ 3.205157] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
[ 3.213548] bgmac_bcma bcma0:6: Unsupported core_unit 3
[ 3.218814] bgmac_bcma: probe of bcma0:6 failed with error -524
[ 3.224939] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
[ 3.232493] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
[ 3.242124] OF: /axi@18000000/pcie@12000: Missing device_type
[ 3.247893] pcie_iproc_bcma bcma0:7: non-prefetchable memory resource required
[ 3.370381] pcie_iproc_bcma bcma0:7: link: UP
[ 3.374880] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
[ 3.381199] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.386712] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
[ 3.393641] pci 0000:00:00.0: [14e4:8012] type 01 class 0x060400
[ 3.399673] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.409415] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 3.416604] PCI: bus0: Fast back to back transfers disabled
[ 3.422216] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.430418] pci 0000:01:00.0: [14e4:aa52] type 00 class 0x028000
[ 3.436460] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.446168] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 3.453000] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 3.459909] pci 0000:01:00.0: supports D1 D2
[ 3.465232] PCI: bus1: Fast back to back transfers disabled
[ 3.470846] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.477505] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x085fffff]
[ 3.484331] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x083fffff 64bit]
[ 3.491687] pci 0000:01:00.0: BAR 0: assigned [mem 0x08400000-0x08407fff 64bit]
[ 3.499028] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 3.504015] pci 0000:00:00.0: bridge window [mem 0x08000000-0x085fffff]
[ 3.510880] pci 0000:00:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[ 3.519243] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
[ 3.526777] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
[ 3.536402] pcie_iproc_bcma bcma0:8: non-prefetchable memory resource required
[ 3.670377] pcie_iproc_bcma bcma0:8: link: UP
[ 3.674868] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
[ 3.681181] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 3.686687] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
[ 3.693616] pci 0001:00:00.0: [14e4:8012] type 01 class 0x060400
[ 3.699647] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.709380] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 3.716556] PCI: bus0: Fast back to back transfers disabled
[ 3.722172] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.730403] pci 0001:01:00.0: [10b5:8603] type 01 class 0x060400
[ 3.736443] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.746151] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff]
[ 3.752584] pci 0001:01:00.0: supports D1 D2
[ 3.756866] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.764568] PCI: bus1: Fast back to back transfers disabled
[ 3.770170] pci 0001:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.778396] pci 0001:02:00.0: [0000:0012] type 12 class 0x001200
[ 3.784449] pci_bus 0001:02: 2-byte config write to 0001:02:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.794154] pci 0001:02:00.0: unknown header type 12, ignoring device
[ 3.800727] pci 0001:02:01.0: [10b5:8603] type 01 class 0x060400
[ 3.806905] pci 0001:02:01.0: supports D1 D2
[ 3.811199] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.818133] pci 0001:02:02.0: [10b5:8603] type 01 class 0x060400
[ 3.824331] pci 0001:02:02.0: supports D1 D2
[ 3.828622] pci 0001:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.835564] pci 0001:02:03.0: [0008:0000] type 00 class 0x000000
[ 3.841922] pci 0001:02:04.0: [0008:0000] type 00 class 0x000000
[ 3.848247] pci 0001:02:05.0: [0008:0000] type 00 class 0x000000
[ 3.854617] pci 0001:02:06.0: [0008:0000] type 00 class 0x000000
[ 3.860976] pci 0001:02:07.0: [0008:0000] type 00 class 0x000000
[ 3.867315] pci 0001:02:08.0: [0008:0000] type 00 class 0x000000
[ 3.873663] pci 0001:02:09.0: [0008:0000] type 00 class 0x000000
[ 3.880003] pci 0001:02:0a.0: [0008:0000] type 00 class 0x000000
[ 3.886361] pci 0001:02:0b.0: [0008:0000] type 00 class 0x000000
[ 3.892701] pci 0001:02:0c.0: [0008:0000] type 00 class 0x000000
[ 3.899045] pci 0001:02:0d.0: [0008:0000] type 00 class 0x000000
[ 3.905388] pci 0001:02:0e.0: [0008:0000] type 00 class 0x000000
[ 3.911760] pci 0001:02:0f.0: [0008:0000] type 00 class 0x000000
[ 3.918106] pci 0001:02:10.0: [0008:0000] type 00 class 0x000000
[ 3.924476] pci 0001:02:11.0: [0008:0000] type 00 class 0x000000
[ 3.930840] pci 0001:02:12.0: [0008:0000] type 00 class 0x000000
[ 3.937181] pci 0001:02:13.0: [0008:0000] type 00 class 0x000000
[ 3.943548] pci 0001:02:14.0: [0008:0000] type 00 class 0x000000
[ 3.949904] pci 0001:02:15.0: [0008:0000] type 00 class 0x000000
[ 3.956252] pci 0001:02:16.0: [0008:0000] type 00 class 0x000000
[ 3.962616] pci 0001:02:17.0: [0008:0000] type 00 class 0x000000
[ 3.968934] pci 0001:02:18.0: [0008:0000] type 00 class 0x000000
[ 3.975311] pci 0001:02:19.0: [0008:0000] type 00 class 0x000000
[ 3.981662] pci 0001:02:1a.0: [0008:0000] type 00 class 0x000000
[ 3.987999] pci 0001:02:1b.0: [0008:0000] type 00 class 0x000000
[ 3.994363] pci 0001:02:1c.0: [0008:0000] type 00 class 0x000000
[ 4.000723] pci 0001:02:1d.0: [0008:0000] type 00 class 0x000000
[ 4.007058] pci 0001:02:1e.0: [0008:0000] type 00 class 0x000000
[ 4.013407] pci 0001:02:1f.0: [0008:0000] type 00 class 0x000000
[ 4.019959] PCI: bus2: Fast back to back transfers disabled
[ 4.025581] pci 0001:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.033635] pci 0001:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.041885] pci 0001:03:00.0: [14e4:aa52] type 00 class 0x028000
[ 4.047923] pci_bus 0001:03: 2-byte config write to 0001:03:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 4.057647] pci 0001:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 4.064481] pci 0001:03:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 4.071471] pci 0001:03:00.0: supports D1 D2
[ 4.076855] PCI: bus3: Fast back to back transfers disabled
[ 4.082468] pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 03
[ 4.089314] pci 0001:04:00.0: [14e4:aa52] type 00 class 0x028000
[ 4.095374] pci_bus 0001:04: 2-byte config write to 0001:04:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 4.105096] pci 0001:04:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 4.111932] pci 0001:04:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 4.118917] pci 0001:04:00.0: supports D1 D2
[ 4.124322] PCI: bus4: Fast back to back transfers disabled
[ 4.129924] pci_bus 0001:04: busn_res: [bus 04-ff] end is updated to 04
[ 4.136588] pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 04
[ 4.143243] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 04
[ 4.149952] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x40cfffff]
[ 4.156790] pci 0001:00:00.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.164577] pci 0001:01:00.0: BAR 8: assigned [mem 0x40000000-0x40bfffff]
[ 4.171393] pci 0001:01:00.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.179158] pci 0001:01:00.0: BAR 0: assigned [mem 0x40c00000-0x40c03fff]
[ 4.185976] pci 0001:01:00.0: BAR 7: no space for [io size 0x1000]
[ 4.192263] pci 0001:01:00.0: BAR 7: failed to assign [io size 0x1000]
[ 4.198907] pci 0001:02:01.0: BAR 8: assigned [mem 0x40000000-0x405fffff]
[ 4.205721] pci 0001:02:02.0: BAR 8: assigned [mem 0x40600000-0x40bfffff]
[ 4.212541] pci 0001:02:01.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.220310] pci 0001:02:01.0: BAR 7: no space for [io size 0x1000]
[ 4.226602] pci 0001:02:01.0: BAR 7: failed to assign [io size 0x1000]
[ 4.233247] pci 0001:03:00.0: BAR 2: assigned [mem 0x40000000-0x403fffff 64bit]
[ 4.240596] pci 0001:03:00.0: BAR 0: assigned [mem 0x40400000-0x40407fff 64bit]
[ 4.247944] pci 0001:02:01.0: PCI bridge to [bus 03]
[ 4.252935] pci 0001:02:01.0: bridge window [mem 0x40000000-0x405fffff]
[ 4.259741] pci 0001:02:01.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.267518] pci 0001:04:00.0: BAR 2: assigned [mem 0x40800000-0x40bfffff 64bit]
[ 4.274876] pci 0001:04:00.0: BAR 0: assigned [mem 0x40600000-0x40607fff 64bit]
[ 4.282225] pci 0001:02:02.0: PCI bridge to [bus 04]
[ 4.287204] pci 0001:02:02.0: bridge window [mem 0x40600000-0x40bfffff]
[ 4.294033] pci 0001:01:00.0: PCI bridge to [bus 02-04]
[ 4.299277] pci 0001:01:00.0: bridge window [mem 0x40000000-0x40bfffff]
[ 4.306088] pci 0001:01:00.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.313863] pci 0001:00:00.0: PCI bridge to [bus 01-04]
[ 4.319102] pci 0001:00:00.0: bridge window [mem 0x40000000-0x40cfffff]
[ 4.325914] pci 0001:00:00.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.333941] pci 0001:00:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[ 4.342321] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
[ 4.349847] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
[ 4.359476] pcie_iproc_bcma bcma0:9: non-prefetchable memory resource required
[ 4.480379] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[ 4.486585] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[ 4.493536] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
[ 4.502601] bcma-host-soc 18000000.axi: bus0: Bus registered
[ 4.509498] NET: Registered PF_INET6 protocol family
[ 4.515878] Segment Routing with IPv6
[ 4.519581] In-situ OAM (IOAM) with IPv6
[ 4.523616] NET: Registered PF_PACKET protocol family
[ 4.528732] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.542123] 8021q: 802.1Q VLAN Support v1.8
[ 4.546380] Registering SWP/SWPB emulation handler
[ 4.554393] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
[ 4.683667] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
[ 4.694808] b53-srab-switch 18007000.ethernet-switch lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
[ 4.707353] b53-srab-switch 18007000.ethernet-switch lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL)
[ 4.719919] b53-srab-switch 18007000.ethernet-switch lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
[ 4.732497] b53-srab-switch 18007000.ethernet-switch lan4 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
[ 4.745087] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] (irq=POLL)
[ 4.757053] DSA: tree 0 setup
[ 4.760961] UBI: auto-attach mtd4
[ 4.764306] ubi0: attaching mtd4
[ 4.937686] ubi0: scanning is finished
[ 4.950178] ubi0: attached mtd4 (name "ubi", size 32 MiB)
[ 4.955645] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.962554] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.969358] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.976344] ubi0: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0
[ 4.982381] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 4.989621] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1319723030
[ 4.998784] ubi0: available PEBs: 0, total reserved PEBs: 256, PEBs reserved for bad PEB handling: 20
[ 5.008074] ubi0: background thread "ubi_bgt0d" started, PID 337
[ 5.014928] block ubiblock0_0: created from ubi0:0(rootfs)
[ 5.020484] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 5.031533] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 5.039654] Freeing unused kernel image (initmem) memory: 1024K
[ 5.070557] Run /sbin/init as init process
[ 5.074669] with arguments:
[ 5.074673] /sbin/init
[ 5.074676] with environment:
[ 5.074679] HOME=/
[ 5.074683] TERM=linux
[ 5.399075] init: Console is alive
[ 5.402779] init: - watchdog -
[ 5.888979] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.968967] bcma_hcd bcma0:12: error -EBUSY: error obtaining VCC GPIO
[ 5.975496] bcma_hcd: probe of bcma0:12 failed with error -16
[ 5.990079] usbcore: registered new interface driver usbfs
[ 5.995712] usbcore: registered new interface driver hub
[ 6.001144] usbcore: registered new device driver usb
[ 6.010580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.018112] fsl-ehci: Freescale EHCI Host controller driver
[ 6.026061] ehci-platform: EHCI generic platform driver
[ 6.034345] ehci-platform 18021000.usb: EHCI Host Controller
[ 6.036688] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.040064] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
[ 6.047142] ohci-platform: OHCI generic platform driver
[ 6.054432] ehci-platform 18021000.usb: irq 45, io mem 0x18021000
[ 6.059692] ohci-platform 18022000.usb: Generic Platform OHCI controller
[ 6.072425] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
[ 6.080417] ohci-platform 18022000.usb: irq 45, io mem 0x18022000
[ 6.100458] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
[ 6.107305] hub 1-0:1.0: USB hub found
[ 6.111265] hub 1-0:1.0: 2 ports detected
[ 6.154987] hub 2-0:1.0: USB hub found
[ 6.158812] hub 2-0:1.0: 2 ports detected
[ 6.173846] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.187676] init: - preinit -
[ 6.750220] mtdblock: MTD device 'nvram' is NAND, please consider using UBI block devices instead.
[ 7.035265] mtdblock: MTD device 'nvram' is NAND, please consider using UBI block devices instead.
[ 7.450533] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
[ 7.459146] bgmac_bcma bcma0:5 eth2: Link is Up - 1Gbps/Full - flow control off
[ 7.466894] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 9.646079] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 9.651940] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 500
[ 9.700842] UBIFS (ubi0:1): recovery needed
[ 9.820295] UBIFS (ubi0:1): recovery completed
[ 9.824912] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 9.832794] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.842744] UBIFS (ubi0:1): FS size: 21966848 bytes (20 MiB, 173 LEBs), max 183 LEBs, journal size 1142784 bytes (1 MiB, 9 LEBs)
[ 9.854346] UBIFS (ubi0:1): reserved for root: 1037548 bytes (1013 KiB)
[ 9.860991] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID D155CD63-6248-4725-8B7E-002D4406B78E, small LPT model
[ 9.874608] mount_root: switching to ubifs overlay
[ 9.891420] urandom-seed: Seeding with /etc/urandom.seed
[ 10.018847] procd: - early -
[ 10.021929] procd: - watchdog -
[ 10.610690] procd: - watchdog -
[ 10.616317] procd: - ubus -
[ 10.671799] procd: - init -
[ 11.393369] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.473936] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4
[ 11.481501] Backport generated by backports.git 193becf2
[ 11.588101] PPP generic driver version 2.4.2
[ 11.596025] NET: Registered PF_PPPOX protocol family
[ 11.620754] usbcore: registered new interface driver brcmfmac
[ 11.626695] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 11.632425] brcmfmac 0000:01:00.0: enabling device (0140 -> 0142)
[ 11.704656] urngd: v1.0.2 started.
[ 11.770600] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 11.779640] pci 0001:00:00.0: enabling device (0140 -> 0142)
[ 11.785354] pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 11.791055] pci 0001:02:01.0: enabling device (0140 -> 0142)
[ 11.796736] brcmfmac 0001:03:00.0: enabling device (0140 -> 0142)
[ 11.803441] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.bin failed with error -2
[ 11.965154] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 11.974219] pci 0001:02:02.0: enabling device (0140 -> 0142)
[ 11.979923] brcmfmac 0001:04:00.0: enabling device (0140 -> 0142)
[ 11.987136] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.bin failed with error -2
[ 12.013717] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[ 12.023721] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[ 12.035817] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 12.046277] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txcap_blob failed with error -2
[ 12.102541] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 12.112946] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txcap_blob failed with error -2
[ 12.162536] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 12.172147] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.bin failed with error -2
[ 12.189262] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.197684] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[ 12.210146] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 12.220597] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txcap_blob failed with error -2
[ 12.346156] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 12.357279] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 12.369487] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Sep 18 2015 03:30:01 version 7.35.177.56 (r587209) FWID 01-6cb8e269
[ 12.386827] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 12.397943] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 12.408432] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Sep 18 2015 03:30:01 version 7.35.177.56 (r587209) FWID 01-6cb8e269
[ 12.445165] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 12.456339] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 12.464517] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Sep 18 2015 03:30:01 version 7.35.177.56 (r587209) FWID 01-6cb8e269
[ 18.514940] bgmac_bcma bcma0:5 eth2: Link is Up - 1Gbps/Full - flow control off
[ 18.523811] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 18.536888] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
[ 18.554612] br-lan: port 1(lan1) entered blocking state
[ 18.559917] br-lan: port 1(lan1) entered disabled state
[ 18.565665] device lan1 entered promiscuous mode
[ 18.570324] device eth2 entered promiscuous mode
[ 18.691267] b53-srab-switch 18007000.ethernet-switch lan2: configuring for phy/gmii link mode
[ 18.704565] br-lan: port 2(lan2) entered blocking state
[ 18.709850] br-lan: port 2(lan2) entered disabled state
[ 18.715600] device lan2 entered promiscuous mode
[ 18.820995] b53-srab-switch 18007000.ethernet-switch lan3: configuring for phy/gmii link mode
[ 18.835927] br-lan: port 3(lan3) entered blocking state
[ 18.841279] br-lan: port 3(lan3) entered disabled state
[ 18.846976] device lan3 entered promiscuous mode
[ 18.953423] b53-srab-switch 18007000.ethernet-switch lan4: configuring for phy/gmii link mode
[ 18.981846] br-lan: port 4(lan4) entered blocking state
[ 18.987162] br-lan: port 4(lan4) entered disabled state
[ 19.010582] device lan4 entered promiscuous mode
[ 19.141092] b53-srab-switch 18007000.ethernet-switch wan: configuring for phy/gmii link mode
[ 21.348314] brcmfmac 0000:01:00.0 phy0-ap0: renamed from wlan1
[ 21.529899] br-lan: port 5(phy0-ap0) entered blocking state
[ 21.535652] br-lan: port 5(phy0-ap0) entered disabled state
[ 21.541543] device phy0-ap0 entered promiscuous mode
[ 21.556920] device phy0-ap0 left promiscuous mode
[ 21.561818] br-lan: port 5(phy0-ap0) entered disabled state
[ 21.592717] br-lan: port 5(phy0-ap0) entered blocking state
[ 21.598332] br-lan: port 5(phy0-ap0) entered disabled state
[ 21.604283] device phy0-ap0 entered promiscuous mode
[ 21.709883] brcmfmac 0001:04:00.0 phy2-ap0: renamed from wlan0
[ 21.829180] br-lan: port 6(phy2-ap0) entered blocking state
[ 21.834857] br-lan: port 6(phy2-ap0) entered disabled state
[ 21.840798] device phy2-ap0 entered promiscuous mode
[ 21.858983] device phy2-ap0 left promiscuous mode
[ 21.863941] br-lan: port 6(phy2-ap0) entered disabled state
[ 21.892415] br-lan: port 6(phy2-ap0) entered blocking state
[ 21.898035] br-lan: port 6(phy2-ap0) entered disabled state
[ 21.903979] device phy2-ap0 entered promiscuous mode
[ 22.053728] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
[ 22.060637] br-lan: port 5(phy0-ap0) entered blocking state
[ 22.066280] br-lan: port 5(phy0-ap0) entered forwarding state
[ 22.080516] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 22.200466] brcmfmac 0001:03:00.0 phy1-ap0: renamed from wlan2
[ 22.267194] br-lan: port 7(phy1-ap0) entered blocking state
[ 22.272860] br-lan: port 7(phy1-ap0) entered disabled state
[ 22.278681] device phy1-ap0 entered promiscuous mode
[ 22.304656] device phy1-ap0 left promiscuous mode
[ 22.309518] br-lan: port 7(phy1-ap0) entered disabled state
[ 22.342398] br-lan: port 7(phy1-ap0) entered blocking state
[ 22.348027] br-lan: port 7(phy1-ap0) entered disabled state
[ 22.354042] device phy1-ap0 entered promiscuous mode
[ 23.113154] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready
[ 23.119941] br-lan: port 6(phy2-ap0) entered blocking state
[ 23.125574] br-lan: port 6(phy2-ap0) entered forwarding state
[ 23.361714] b53-srab-switch 18007000.ethernet-switch wan: Link is Up - 1Gbps/Full - flow control rx/tx
[ 23.371153] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
[ 23.850129] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[ 23.857038] br-lan: port 7(phy1-ap0) entered blocking state
[ 23.862707] br-lan: port 7(phy1-ap0) entered forwarding state
[-- Attachment #3: ddwrt.r55416.txt --]
[-- Type: text/plain, Size: 45287 bytes --]
[hranislav@toshiba-laptop ~]$ mactelnet r8000
Searching for 'r8000'...found
Login: root
Password:
Connecting to 2c:30:33:59:aa:55...done
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.36.1 (2024-03-19 05:14:22 +06) built-in shell (ash)
~ # for f in brcmfmac43602-pcie.*; do strings $f | tail -1;in brcmfmac43602-pcie.*; do strings $f | tail -1;
> >
NOTHING NO MICROCODE VERSION
~ # cat /tmp/wlan2_hostap.conf
eee80211h=1
no_country_ie=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx_freq=5210
hw_mode=a
basic_rates=60 120 240
channel=44
frequency=5220
beacon_int=100
interface=wlan2
no_country_ie=1
preamble=1
disassoc_low_ack=1
wmm_enabled=1
ignore_broadcast_ssid=0
max_num_sta=256
dtim_period=2
ssid=Marko&Pavle
bridge=br0
bridge=br0
logger_syslog=-1
logger_stdout=-1
logger_stdout_level=2
eapol_version=1
eapol_key_index_workaround=0
wpa=2
ieee80211w=0
wpa_passphrase=mojabeti12
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
okc=0
disable_pmksa_caching=1
wpa_group_rekey=3600
wpa_strict_rekey=0
signal_connect=-128
signal_stay=-128
signal_poll_time=10
signal_strikes=3
~ # eee80211h=1
no_country_ie=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx_freq=5210
hw_mode=a
basic_rates=60 120 240
channel=44
frequency=5220
beacon_int=100
interface=wlan2
no_country_ie=1
preamble=1
disassoc_low_ack=1
wmm_enabled=1
ignore_broadcast_ssid=0
max_num_sta=256
dtim_period=2
ssid=Marko&Pavle
bridge=br0
bridge=br0
logger_syslog=-1
logger_stdout=-1
logger_stdout_level=2
eapol_version=1
eapol_key_index_workaround=0
wpa=2
ieee80211w=0
wpa_passphrase=mojabeti12
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
okc=0
disable_pmksa_caching=1
wpa_group_rekey=3600
wpa_strict_rekey=0
signal_connect=-128
signal_stay=-128
signal_poll_time=10
signal_strikes=3
~ # cat /tmp/wlan0_hostap.conf
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
country_code=US
tx_queue_data2_burst=2.0
wmm_ac_be_txop_limit=0
ieee80211n=1
noscan=1
dynamic_ht40=0
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
vht_capab=[SHORT-GI-80][MAX-A-MPDU-LEN-EXP0]
ieee80211ac=1
ieee80211d=1
ieee80211h=1
no_country_ie=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx_freq=5210
hw_mode=a
basic_rates=60 120 240
channel=44
frequency=5220
beacon_int=100
interface=wlan2
no_country_ie=1
preamble=1
disassoc_low_ack=1
wmm_enabled=1
ignore_broadcast_ssid=0
max_num_sta=256
dtim_period=2
ssid=Marko&Pavle
bridge=br0
bridge=br0
logger_syslog=-1
logger_stdout=-1
logger_stdout_level=2
eapol_version=1
eapol_key_index_workaround=0
wpa=2
ieee80211w=0
wpa_passphrase=mojabeti12
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
okc=0
disable_pmksa_caching=1
wpa_group_rekey=3600
wpa_strict_rekey=0
signal_connect=-128
signal_stay=-128
signal_poll_time=10
signal_strikes=3
~ # ~ # cat /tmp/wlan1_hostap.conf
driver=nl80211
ctrl_interface=/var/run/hostapd
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
country_code=US
tx_queue_data2_burst=2.0
wmm_ac_be_txop_limit=0
ieee80211n=1
noscan=1
dynamic_ht40=0
ht_capab=[HT20][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
hw_mode=g
basic_rates=10 20 55 60 110 120 240
supported_rates=10 20 55 60 90 110 120 180 240 360 480 540
channel=6
frequency=2437
beacon_int=100
interface=wlan1
vht_capab=[MAX-A-MPDU-LEN-EXP0]
ieee80211ac=1
vht_oper_chwidth=0
no_country_ie=1
vendor_vht=1
preamble=1
disassoc_low_ack=1
wmm_enabled=1
ignore_broadcast_ssid=0
max_num_sta=256
dtim_period=2
ssid=Marko&Pavle
bridge=br0
bridge=br0
logger_syslog=-1
logger_stdout=-1
logger_stdout_level=2
eapol_version=1
eapol_key_index_workaround=0
wpa=2
ieee80211w=0
wpa_passphrase=mojabeti12
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
okc=0
disable_pmksa_caching=1
wpa_group_rekey=3600
wpa_strict_rekey=0
signal_connect=-128
signal_stay=-128
signal_poll_time=10
signal_strikes=3
~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Northstar Prototype
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] map io
[ 0.000000] MPCORE found at 19020000 (VIRT 99020000) 18000000 98000000
[ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat 805c26c0, node_mem_map 86bb8000
[ 0.000000] Normal zone: 288 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] HighMem zone: 32768 pages, LIFO batch:7
[ 0.000000] PERCPU: Embedded 11 pages/cpu @86b94000 s12588 r8192 d24276 u45056
[ 0.000000] pcpu-alloc: s12588 r8192 d24276 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65248
[ 0.000000] Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3 earlyprintk=1 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 253004K/262144K available (4029K kernel code, 271K rwdata, 1412K rodata, 340K init, 487K bss, 9140K reserved, 0K cma-reserved, 131072K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0x88800000 - 0xff800000 (1904 MB)
[ 0.000000] lowmem : 0x80000000 - 0x88000000 ( 128 MB)
[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80008000 - 0x80558b34 (5443 kB)
[ 0.000000] .init : 0x80559000 - 0x805ae000 ( 340 kB)
[ 0.000000] .data : 0x805ae000 - 0x805f1d1c ( 272 kB)
[ 0.000000] .bss : 0x805f4000 - 0x8066df04 ( 488 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] MPCORE GIC init
[ 0.000000] soc_dmu_init
[ 0.000000] add clk lookups
[ 0.000000] MPCORE Global Timer Clock 500000000Hz on IRQ 27
[ 0.000007] sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 4294967295ns
[ 0.000031] clocksource: mpcore_gtimer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[ 0.000054] register local timer
00] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80008000 - 0x80558b34 (5443 kB)
[ 0.000000] .init : 0x80559000 - 0x805ae000 ( 340 kB)
[ 0.000000] .data : 0x805ae000 - 0x805f1d1c ( 272 kB)
[ 0.000000] .bss : 0x805f4000 - 0x8066df04 ( 488 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] MPCORE GIC init
[ 0.000000] soc_dmu_init
[ 0.000000] add clk lookups
[ 0.000000] MPCORE Global Timer Clock 500000000Hz on IRQ 27
[ 0.000007] sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 4294967295ns
[ 0.000031] clocksource: mpcore_gtimer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[ 0.000054] register local timer
[ 0.000095] smp_twd: clock not found -2
[ 0.000132] Calibrating local timer... 499.75MHz.
[ 0.060078] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
[ 0.120070] pid_max: default: 32768 minimum: 301
[ 0.120201] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.120219] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.120954] Initializing cgroup subsys io
[ 0.120985] Initializing cgroup subsys memory
[ 0.121032] Initializing cgroup subsys pids
[ 0.121096] CPU: Testing write buffer coherency: ok
[ 0.121426] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.121441] 2 cores has been found
[ 0.121542] Setting up static identity map for 0x85e0 - 0x8614
[ 0.121653] L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
[ 0.180062] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.180131] Brought up 2 CPUs
[ 0.180145] SMP: Total of 2 processors activated (3981.31 BogoMIPS).
[ 0.183875] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.183910] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.184414] NET: Registered protocol family 16
[ 0.185055] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.185633] coherence_win_size = 10000000
[ 0.185646] coherence_flag = FFFFFFF8
[ 0.185651] ddr_phys_offset_va =FFFFFFFF
[ 0.185655] ddr_phys_offset2_va =A8000000
[ 0.185682] Found a AMD NAND flash:
[ 0.185687] Total size: 128MB
[ 0.185691] Block size: 128KB
[ 0.185695] Page Size: 2048B
[ 0.185699] OOB Size: 64B
[ 0.185703] Sector size: 512B
[ 0.185707] Spare size: 16B
[ 0.185711] ECC level: 8 (8-bit)
[ 0.185717] Device ID: 0x 1 0xf1 0x80 0x1d 0x 1 0xf1
[ 0.211716] found nand nvram at 80000
[ 0.211945] CCA UART Clock Config: Sel=1 Ovr=1 Div=48
[ 0.211953] CCA UART Clock rate 125000000Hz CCB UART Clock rate 125000000Hz
[ 0.241022] alg: self-tests for poly1305-generic (poly1305) passed
[ 0.242742] clocksource: Switched to clocksource mpcore_gtimer
[ 0.243904] NET: Registered protocol family 2
[ 0.244044] IP idents hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.244427] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.244446] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.244464] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.244517] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.244544] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.244688] NET: Registered protocol family 1
[ 0.244735] PCI: CLS 0 bytes, default 32
[ 0.245109] alg: self-tests for aes-asm (aes) passed
[ 0.245466] alg: self-tests for sha1-asm (sha1) passed
[ 0.245812] alg: self-tests for sha256-asm (sha256) passed
[ 0.246082] alg: self-tests for sha224-asm (sha224) passed
[ 0.246598] alg: self-tests for sha384-arm (sha384) passed
[ 0.247099] alg: self-tests for sha512-arm (sha512) passed
[ 0.247285] alg: self-tests for poly1305-arm (poly1305) passed
[ 0.247310] init gpio code
[ 0.248938] Netgear R8000 init
[ 0.249294] PCI: no core
[ 0.249300] PCI: no core
[ 0.249565] PCI: scanning bus 0
[ 0.249668] PCI host bridge to bus 0000:00
[ 0.249687] pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
[ 0.249697] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.249709] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.249735] pci 0000:00:00.0: [14e4:0800] type 00 class 0x050100
[ 0.249762] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x18000fff]
[ 0.249784] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.249958] pci 0000:00:01.0: [14e4:050b] type 00 class 0xffffff
[ 0.249981] pci 0000:00:01.0: reg 0x10: [mem 0x18001000-0x18001fff]
[ 0.250046] pci 0000:00:01.0: reg 0x14: [mem 0x18002000-0x18002fff]
[ 0.250063] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250191] pci 0000:00:02.0: [14e4:0502] type 00 class 0xffffff
[ 0.250210] pci 0000:00:02.0: reg 0x10: [mem 0x1802c000-0x1802cfff]
[ 0.250230] pci 0000:00:02.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250344] pci 0000:00:03.0: [14e4:4715] type 00 class 0x020000
[ 0.250363] pci 0000:00:03.0: reg 0x10: [mem 0x18024000-0x18024fff]
[ 0.250384] pci 0000:00:03.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250504] pci 0000:00:04.0: [14e4:4715] type 00 class 0x020000
[ 0.250525] pci 0000:00:04.0: reg 0x10: [mem 0x18025000-0x18025fff]
[ 0.250544] pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250657] pci 0000:00:05.0: [14e4:4715] type 00 class 0x020000
[ 0.250675] pci 0000:00:05.0: reg 0x10: [mem 0x18026000-0x18026fff]
[ 0.250695] pci 0000:00:05.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250819] pci 0000:00:06.0: [14e4:4715] type 00 class 0x020000
[ 0.250836] pci 0000:00:06.0: reg 0x10: [mem 0x18027000-0x18027fff]
[ 0.250857] pci 0000:00:06.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250972] pci 0000:00:07.0: [14e4:0501] type 00 class 0xffffff
[ 0.250990] pci 0000:00:07.0: reg 0x10: [mem 0x18012000-0x18012fff]
[ 0.251010] pci 0000:00:07.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251134] pci 0000:00:08.0: [14e4:0501] type 00 class 0xffffff
[ 0.251152] pci 0000:00:08.0: reg 0x10: [mem 0x18013000-0x18013fff]
[ 0.251172] pci 0000:00:08.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251285] pci 0000:00:09.0: [14e4:0501] type 00 class 0xffffff
[ 0.251303] pci 0000:00:09.0: reg 0x10: [mem 0x18014000-0x18014fff]
[ 0.251321] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251442] pci 0000:00:0a.0: [14e4:0510] type 00 class 0xffffff
[ 0.251461] pci 0000:00:0a.0: reg 0x10: [mem 0x1800b000-0x1800bfff]
[ 0.251473] pci 0000:00:0a.0: reg 0x14: [mem 0x1800c000-0x1800cfff]
[ 0.251490] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251615] pci 0000:00:0b.0: [14e4:471a] type 00 class 0x0c0310
[ 0.251632] pci 0000:00:0b.0: reg 0x10: [mem 0x18022000-0x18022fff]
[ 0.251651] pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251774] pci 0000:00:0b.1: [14e4:471a] type 00 class 0x0c0320
[ 0.251792] pci 0000:00:0b.1: reg 0x10: [mem 0x18021000-0x18021fff]
[ 0.251812] pci 0000:00:0b.1: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251939] pci 0000:00:0c.0: [14e4:472a] type 00 class 0x0c0330
[ 0.251959] pci 0000:00:0c.0: reg 0x10: [mem 0x18023000-0x18023fff]
[ 0.251980] pci 0000:00:0c.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252097] pci 0000:00:0d.0: [14e4:0503] type 00 class 0xffffff
[ 0.252115] pci 0000:00:0d.0: reg 0x10: [mem 0x18020000-0x18020fff]
[ 0.252135] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252262] pci 0000:00:0e.0: [14e4:4711] type 00 class 0x040100
[ 0.252280] pci 0000:00:0e.0: reg 0x10: [mem 0x1802a000-0x1802afff]
[ 0.252300] pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252416] pci 0000:00:0f.0: [14e4:0506] type 00 class 0xffffff
[ 0.252434] pci 0000:00:0f.0: reg 0x10: [mem 0x18210000-0x1821ffff]
[ 0.252454] pci 0000:00:0f.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252572] pci 0000:00:10.0: [14e4:0507] type 00 class 0xffffff
[ 0.252589] pci 0000:00:10.0: reg 0x10: [mem 0x18010000-0x18010fff]
[ 0.252609] pci 0000:00:10.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252740] pci 0000:00:11.0: [14e4:0508] type 00 class 0xffffff
[ 0.252758] pci 0000:00:11.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[ 0.252779] pci 0000:00:11.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252896] pci 0000:00:12.0: [14e4:0509] type 00 class 0xffffff
[ 0.252917] pci 0000:00:12.0: reg 0x10: [mem 0x18028000-0x18028fff]
[ 0.252937] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.253065] pci 0000:00:13.0: [14e4:050a] type 00 class 0xffffff
[ 0.253088] pci 0000:00:13.0: reg 0x10: [mem 0x18029000-0x18029fff]
[ 0.253108] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.253232] PCI: Fixing up bus 0 domain 0
[ 0.618699] PCIE1 link=1
[ 0.618975] PCIE1 switching to GEN2
[ 0.968409] PCIE1 link=1
[ 0.968516] PCI host bridge to bus 0001:00
[ 0.968535] pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
[ 0.968544] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.968573] pci 0001:00:00.0: [14e4:8012] type 01 class 0x060400
[ 0.968630] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.968775] PCI: Fixing up bus 0 domain 1
[ 0.968787] PCI: bus0: Fast back to back transfers disabled
[ 0.968896] pci 0001:01:00.0: [14e4:aa52] type 00 class 0x028000
[ 0.968936] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 0.968953] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 0.968983] pci 0001:01:00.0: Max Payload Size set to 512 (was 128, max 512)
[ 0.969046] pci 0001:01:00.0: supports D1 D2
[ 0.969160] PCI: Fixing up bus 1 domain 1
[ 0.969175] PCI: bus1: Fast back to back transfers disabled
[ 0.969186] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.969199] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.969266] pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x085fffff]
[ 0.969280] pci 0001:01:00.0: BAR 2: assigned [mem 0x08000000-0x083fffff 64bit]
[ 0.969299] pci 0001:01:00.0: BAR 0: assigned [mem 0x08400000-0x08407fff 64bit]
[ 0.969315] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.969324] pci 0001:00:00.0: bridge window [mem 0x08000000-0x085fffff]
[ 1.318795] PCIE2 link=1
[ 1.319089] PCIE2 switching to GEN2
[ 1.668528] PCIE2 link=1
[ 1.668640] PCI host bridge to bus 0002:00
[ 1.668657] pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
[ 1.668667] pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.668696] pci 0002:00:00.0: [14e4:8012] type 01 class 0x060400
[ 1.668747] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.668881] PCI: Fixing up bus 0 domain 2
[ 1.668894] PCI: bus0: Fast back to back transfers disabled
[ 1.668982] PCIE: Doing PLX switch Init...Test Read = fb410003
[ 1.668993] PCIE: Doing PLX switch Init...GPIO Read = 0000003c
[ 1.718860] PCIE: Setting PEX8603 UpPort to 0dB de-emphasis.
[ 1.718868] PCIE 0002:01:0000: PLX UpPort mem_base 0x40000000, mem_limit 0x41ffffff
[ 1.718917] pci 0002:01:00.0: [10b5:8603] type 01 class 0x060400
[ 1.718963] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff]
[ 1.719065] pci 0002:01:00.0: supports D1 D2
[ 1.719074] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.719213] PCI: Fixing up bus 1 domain 2
[ 1.719233] PCI: bus1: Fast back to back transfers disabled
[ 1.719367] PCIE: Doing PLX switch Init...Test Read = fb410003
[ 1.719379] PCIE: Doing PLX switch Init...GPIO Read = 00000000
[ 1.769249] PCIE 0002:02:0008: PLX DownPort mem_base 0x43000000, mem_limit 0x44ffffff
[ 1.868970] PCIE 0002:02:0008: PLX DownPort Link speed is GEN2
[ 1.868975] PCIE 0002:02:0008: PLX DownPort Link status 0x6012
[ 1.869020] pci 0002:02:01.0: [10b5:8603] type 01 class 0x060400
[ 1.869159] pci 0002:02:01.0: supports D1 D2
[ 1.869168] pci 0002:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.869306] PCIE: Doing PLX switch Init...Test Read = fb410003
[ 1.869317] PCIE: Doing PLX switch Init...GPIO Read = 00000000
[ 1.919186] PCIE 0002:02:0010: PLX DownPort mem_base 0x46000000, mem_limit 0x47ffffff
[ 2.018907] PCIE 0002:02:0010: PLX DownPort Link speed is GEN2
[ 2.018912] PCIE 0002:02:0010: PLX DownPort Link status 0x6012
[ 2.018964] pci 0002:02:02.0: [10b5:8603] type 01 class 0x060400
[ 2.019100] pci 0002:02:02.0: supports D1 D2
[ 2.019108] pci 0002:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.019264] PCI: Fixing up bus 2 domain 2
[ 2.019295] PCI: bus2: Fast back to back transfers disabled
[ 2.019449] pci 0002:03:00.0: [14e4:aa52] type 00 class 0x028000
[ 2.019510] pci 0002:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 2.019534] pci 0002:03:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 2.019664] pci 0002:03:00.0: supports D1 D2
[ 2.019805] PCI: Fixing up bus 3 domain 2
[ 2.019823] PCI: bus3: Fast back to back transfers disabled
[ 2.019835] pci_bus 0002:03: busn_res: [bus 03-ff] end is updated to 03
[ 2.019995] pci 0002:04:00.0: [14e4:aa52] type 00 class 0x028000
[ 2.020058] pci 0002:04:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 2.020081] pci 0002:04:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 2.020214] pci 0002:04:00.0: supports D1 D2
[ 2.020359] PCI: Fixing up bus 4 domain 2
[ 2.020376] PCI: bus4: Fast back to back transfers disabled
[ 2.020388] pci_bus 0002:04: busn_res: [bus 04-ff] end is updated to 04
[ 2.020402] pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 04
[ 2.020415] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 04
[ 2.020426] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 04
[ 2.020546] pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x40cfffff]
[ 2.020559] pci 0002:00:00.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020573] pci 0002:01:00.0: BAR 8: assigned [mem 0x40000000-0x40bfffff]
[ 2.020583] pci 0002:01:00.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020592] pci 0002:01:00.0: BAR 0: assigned [mem 0x40c00000-0x40c03fff]
[ 2.020604] pci 0002:01:00.0: BAR 7: no space for [io size 0x1000]
[ 2.020613] pci 0002:01:00.0: BAR 7: failed to assign [io size 0x1000]
[ 2.020625] pci 0002:02:01.0: BAR 8: assigned [mem 0x40000000-0x405fffff]
[ 2.020634] pci 0002:02:02.0: BAR 8: assigned [mem 0x40600000-0x40bfffff]
[ 2.020643] pci 0002:02:01.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020651] pci 0002:02:01.0: BAR 7: no space for [io size 0x1000]
[ 2.020659] pci 0002:02:01.0: BAR 7: failed to assign [io size 0x1000]
[ 2.020669] pci 0002:03:00.0: BAR 2: assigned [mem 0x40000000-0x403fffff 64bit]
[ 2.020693] pci 0002:03:00.0: BAR 0: assigned [mem 0x40400000-0x40407fff 64bit]
[ 2.020715] pci 0002:02:01.0: PCI bridge to [bus 03]
[ 2.020726] pci 0002:02:01.0: bridge window [mem 0x40000000-0x405fffff]
[ 2.020735] pci 0002:02:01.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020749] pci 0002:04:00.0: BAR 2: assigned [mem 0x40800000-0x40bfffff 64bit]
[ 2.020772] pci 0002:04:00.0: BAR 0: assigned [mem 0x40600000-0x40607fff 64bit]
[ 2.020793] pci 0002:02:02.0: PCI bridge to [bus 04]
[ 2.020803] pci 0002:02:02.0: bridge window [mem 0x40600000-0x40bfffff]
[ 2.020817] pci 0002:01:00.0: PCI bridge to [bus 02-04]
[ 2.020826] pci 0002:01:00.0: bridge window [mem 0x40000000-0x40bfffff]
[ 2.020835] pci 0002:01:00.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020846] pci 0002:00:00.0: PCI bridge to [bus 01-04]
[ 2.020854] pci 0002:00:00.0: bridge window [mem 0x40000000-0x40cfffff]
[ 2.020862] pci 0002:00:00.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.270576] PCIE3 link=0
[ 2.276805] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.277033] alg: self-tests for cipher_null-generic (cipher_null) passed
[ 2.277119] alg: self-tests for ecb-cipher_null (ecb(cipher_null)) passed
[ 2.277189] alg: self-tests for compress_null-generic (compress_null) passed
[ 2.277262] alg: self-tests for digest_null-generic (digest_null) passed
[ 2.277439] alg: self-tests for md4-generic (md4) passed
[ 2.277610] alg: self-tests for md5-generic (md5) passed
[ 2.277864] alg: self-tests for sha1-generic (sha1) passed
[ 2.278168] alg: self-tests for sha256-generic (sha256) passed
[ 2.278462] alg: self-tests for sha224-generic (sha224) passed
[ 2.278644] alg: self-tests for aes-generic (aes) passed
[ 2.278824] alg: self-tests for arc4-generic (arc4) passed
[ 2.279396] alg: self-tests for ecb(arc4)-generic (ecb(arc4)) passed
[ 2.279757] alg: self-tests for crc32c-generic (crc32c) passed
[ 2.280356] alg: self-tests for drbg_pr_ctr_aes128 (stdrng) passed
[ 2.280450] alg: self-tests for drbg_pr_ctr_aes192 (stdrng) passed
[ 2.280528] alg: self-tests for drbg_pr_ctr_aes256 (stdrng) passed
[ 2.280600] alg: self-tests for drbg_pr_sha1 (stdrng) passed
[ 2.280675] alg: self-tests for drbg_pr_sha384 (stdrng) passed
[ 2.280754] alg: self-tests for drbg_pr_sha512 (stdrng) passed
[ 2.281167] alg: self-tests for drbg_pr_sha256 (stdrng) passed
[ 2.281252] alg: self-tests for drbg_pr_hmac_sha1 (stdrng) passed
[ 2.281331] alg: self-tests for drbg_pr_hmac_sha384 (stdrng) passed
[ 2.281404] alg: self-tests for drbg_pr_hmac_sha512 (stdrng) passed
[ 2.282305] alg: self-tests for hmac(sha256-asm) (hmac(sha256)) passed
[ 2.283209] alg: self-tests for drbg_pr_hmac_sha256 (stdrng) passed
[ 2.283695] alg: self-tests for drbg_nopr_ctr_aes128 (stdrng) passed
[ 2.283900] alg: self-tests for drbg_nopr_ctr_aes192 (stdrng) passed
[ 2.284104] alg: self-tests for drbg_nopr_ctr_aes256 (stdrng) passed
[ 2.284186] alg: self-tests for drbg_nopr_sha1 (stdrng) passed
[ 2.284262] alg: self-tests for drbg_nopr_sha384 (stdrng) passed
[ 2.284338] alg: self-tests for drbg_nopr_sha512 (stdrng) passed
[ 2.284633] alg: self-tests for drbg_nopr_sha256 (stdrng) passed
[ 2.284728] alg: self-tests for drbg_nopr_hmac_sha1 (stdrng) passed
[ 2.284807] alg: self-tests for drbg_nopr_hmac_sha384 (stdrng) passed
[ 2.284880] alg: self-tests for drbg_nopr_hmac_sha512 (stdrng) passed
[ 2.285724] alg: self-tests for drbg_nopr_hmac_sha256 (stdrng) passed
[ 2.287123] alg: self-tests for jitterentropy_rng (jitterentropy_rng) passed
[ 2.287483] alg: self-tests for ghash-generic (ghash) passed
[ 2.287516] NET: Registered protocol family 38
[ 2.287660] io scheduler noop registered (default)
[ 2.287721] io scheduler cfq registered
[ 2.288995] serial8250_init
[ 2.289013] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 2.289518] console [ttyS0] disabled
[ 2.289563] serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 7812500) is a 16550
[ 3.575404] console [ttyS0] enabled
[ 3.579149] serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 7812500) is a 16550
[ 3.596909] brd: module loaded
[ 3.604786] loop: module loaded
[ 3.608832] bcmsflash: found no supported devices
[ 4.199136] Boot partition size = 524288(0x80000)
[ 4.205742] lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x2400000, 0x20000
[ 4.214409] found TRX Header on nflash!
[ 4.219152] nflash: squash filesystem with lzma found at block 32
[ 4.227269] Creating 5 MTD partitions on "nflash":
[ 4.232082] 0x000000000000-0x000000080000 : "boot"
[ 4.237579] 0x000000080000-0x000000200000 : "nvram"
[ 4.243433] 0x000000200000-0x000002600000 : "linux"
[ 4.249258] 0x000000400000-0x000002600000 : "rootfs"
[ 4.254919] 0x000002600000-0x000002680000 : "board_data"
[ 4.260975] PPP generic driver version 2.4.2
[ 4.265469] PPP BSD Compression module registered
[ 4.270196] PPP Deflate Compression module registered
[ 4.275291] PPP MPPE Compression module registered
[ 4.280103] NET: Registered protocol family 24
[ 4.284584] i2c /dev entries driver
[ 4.288143] GACT probability NOT on
[ 4.291658] Mirror/redirect action on
[ 4.295343] Simple TC action Loaded
[ 4.299375] netem: version 1.3
[ 4.302484] u32 classifier
[ 4.305197] Performance counters on
[ 4.309035] input device check on
[ 4.312714] Actions configured
[ 4.316144] Netfilter messages via NETLINK v0.30.
[ 4.320902] nf_conntrack version 0.5.0.4 (3953 buckets, 15812 max)
[ 4.327561] nf_conntrack_rtsp v0.7 loading
[ 4.332040] xt_time: kernel timezone is -0000
[ 4.336424] ip_set: protocol 6
[ 4.339701] gre: GRE over IPv4 demultiplexor driver
[ 4.344891] nf_nat_rtsp v0.7 loading
[ 4.348494] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.354082] NET: Registered protocol family 17
[ 4.358596] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 4.371462] Bridge firewalling registered
[ 4.375489] 8021q: 802.1Q VLAN Support v1.8
[ 4.379811] Registering SWP/SWPB emulation handler
[ 4.384647] max nvram space = 131072
[ 4.388271] read 65536 bytes to offset 0
[ 4.407195] registered taskstats version 1
[ 4.412152] Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
[ 4.420958] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 4.427324] nand: AMD/Spansion NAND 128MiB 3,3V 8-bit
[ 4.432396] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 4.439996] Spare area=64 eccbytes 56, ecc bytes located at:
[ 4.445662] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
[ 4.445662] Available 7 bytes at (off,len):
[ 4.464454] (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
[ 4.483218] Scanning device for bad blocks
[ 5.073857] Options: NO_SUBPAGE_WRITE,
[ 5.077650] Creating 1 MTD partitions on "brcmnand":
[ 5.082627] 0x000002680000-0x000008000000 : "ddwrt"
[ 5.093370] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 5.100833] Freeing unused kernel memory: 340K
[ 8.211237] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
[ 8.480732] eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.164.18 (r692288)
[ 8.538637] switch id 12
[ 8.541188] switch id32 53012
[ 8.544183] b5301x_common: found switch: BCM53012, rev 5
[ 8.685541] b53_robo_cpu_port_upd, pdesc[8].cpu=1
[ 8.690335] bcm_robo_config_vlan_fun vid=1, vlan->members=0x1af, vlan->untag=0xaf
[ 8.697956] bcm_robo_config_vlan_fun ports=0 1 2 3 5 7 8t
[ 8.703483] bcm_robo_config_vlan_fun vid=2, vlan->members=0x110, vlan->untag=0x110
[ 8.711165] bcm_robo_config_vlan_fun ports=4 8
[ 8.837360] Loading modules backported from Linux version v5.15.33-0-g06f50ca83ace
[ 8.844961] Backport generated by backports.git v5.15.33-1-0-g183c4ab2
[ 9.305707] PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
[ 9.458628] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 9.818658] scan for domain_nr 1 and bus 1
[ 9.822796] load nvram for 0
[ 9.825882] nvram len = 2066
[ 9.828841] Halt ARM.
[ 9.831119] Download FW brcm/brcmfmac43602-pcie.bin
[ 9.863611] Download NVRAM brcm/brcmfmac43602-pcie.txt
[ 9.868873] Bring ARM in running state
[ 9.908348] Wait for FW init
[ 9.968318] Shared RAM addr: 0x001e946c
[ 9.972177] Console: base 26eccc, buf 26e8c4, size 1024
[ 9.979988] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 9.985084] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 9.990997] 0001:01:00.0: CONSOLE: 604, Failed: 0
[ 9.995789] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.004603] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 10.014915] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 10.026614] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Jun 12 2022 22:08:58 version 7.49.6 (r588839) FWID 01-f458629d
[ 10.041172] 0001:01:00.0: CONSOLE:
[ 10.046476] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 10.055301] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was pfn_gscan_cfg
[ 10.063802] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 10.072446] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was pfn
[ 10.080089] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 10.088730] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was rsdb_mode
[ 10.096893] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 10.105536] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was tdls_enable
[ 10.114034] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 10.122676] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was pfn_macaddr
[ 10.131009] enabling firmware feature: MONITOR_FMT_RADIOTAP
[ 10.137896] brcmfmac: brcmf_setup_wiphybands: nmode=1, vhtmode=1, vhtmode_init=1 , bw_cap=(0, 7)
[ 10.151023] 0001:01:00.0: CONSOLE: 000000.241 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 10.161704] 0001:01:00.0: CONSOLE: 000000.241 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 10.172728] PCI: Enabling device 0002:03:00.0 (0140 -> 0142)
[ 10.328237] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.340994] scan for domain_nr 2 and bus 3
[ 10.345133] load nvram for 1
[ 10.348249] nvram len = 1303
[ 10.351207] Halt ARM.
[ 10.353491] Download FW brcm/brcmfmac43602-pcie.bin
[ 10.392506] Download NVRAM brcm/brcmfmac43602-pcie.txt
[ 10.397746] Bring ARM in running state
[ 10.438097] Wait for FW init
[ 10.498059] Shared RAM addr: 0x001e946c
[ 10.501919] Console: base 26eccc, buf 26e8c4, size 1024
[ 10.509749] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 10.514848] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 10.520767] 0002:03:00.0: CONSOLE: 604, Failed: 0
[ 10.526062] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.534845] brcmfmac 0002:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 10.545161] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 10.556902] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Jun 12 2022 22:08:58 version 7.49.6 (r588839) FWID 01-f458629d
[ 10.571594] 0002:03:00.0: CONSOLE:
[ 10.578475] enabling firmware feature: MONITOR_FMT_RADIOTAP
[ 10.585648] brcmfmac: brcmf_setup_wiphybands: nmode=1, vhtmode=1, vhtmode_init=1 , bw_cap=(1, 0)
[ 10.599602] 0002:03:00.0: CONSOLE: 000000.159 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 10.610492] 0002:03:00.0: CONSOLE: 000000.170 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 10.622226] PCI: Enabling device 0002:04:00.0 (0140 -> 0142)
[ 10.778025] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.790672] scan for domain_nr 2 and bus 4
[ 10.794807] load nvram for 2
[ 10.797897] nvram len = 2128
[ 10.800886] Halt ARM.
[ 10.803165] Download FW brcm/brcmfmac43602-pcie.bin
[ 10.855278] Download NVRAM brcm/brcmfmac43602-pcie.txt
[ 10.860604] Bring ARM in running state
[ 10.897869] Wait for FW init
[ 10.957836] Shared RAM addr: 0x001e946c
[ 10.961698] Console: base 26eccc, buf 26e8c4, size 1024
[ 10.969525] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 10.974614] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 10.980532] 0002:04:00.0: CONSOLE: 604, Failed: 0
[ 10.985816] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.994599] brcmfmac 0002:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 11.004914] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 11.016726] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Jun 12 2022 22:08:58 version 7.49.6 (r588839) FWID 01-f458629d
[ 11.031435] 0002:04:00.0: CONSOLE:
[ 11.039832] enabling firmware feature: MONITOR_FMT_RADIOTAP
[ 11.048629] brcmfmac: brcmf_setup_wiphybands: nmode=1, vhtmode=1, vhtmode_init=1 , bw_cap=(0, 7)
[ 11.065737] 0002:04:00.0: CONSOLE: 000000.165 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 11.077051] 0002:04:00.0: CONSOLE: 000000.176 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 11.241646] eth0: mixed HW and IP checksum settings.
[ 12.615580] NET: Registered protocol family 10
[ 12.778732] sit: IPv6 over IPv4 tunneling driver
[ 12.992007] mip6: Mobile IPv6
[ 18.009332] net_ratelimit: 26 callbacks suppressed
[ 18.014152] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 18.022901] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was toe_ol
[ 18.054767] 0001:01:00.0: CONSOLE: 000008.145 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 18.065794] brcmfmac: brcmf_config_dongle: power save set to disabled
[ 18.072862] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=2
[ 18.082242] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 18.090876] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 18.099121] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 18.106146] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.112946] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 18.121618] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 18.159844] b53_robo_cpu_port_upd, pdesc[8].cpu=1
[ 18.164626] bcm_robo_config_vlan_fun vid=1, vlan->members=0x1af, vlan->untag=0xaf
[ 18.172213] bcm_robo_config_vlan_fun ports=0 1 2 3 5 7 8t
[ 18.177839] bcm_robo_config_vlan_fun vid=2, vlan->members=0x110, vlan->untag=0x110
[ 18.185525] bcm_robo_config_vlan_fun ports=4 8
[ 18.207944] device br0 entered promiscuous mode
[ 18.308415] device vlan1 entered promiscuous mode
[ 18.313532] device eth0 entered promiscuous mode
[ 18.326746] br0: port 1(vlan1) entered forwarding state
[ 18.332264] br0: port 1(vlan1) entered forwarding state
[ 18.337793] device br0 left promiscuous mode
[ 18.345953] device br0 entered promiscuous mode
[ 18.358835] device br0 left promiscuous mode
[ 18.399060] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 18.407977] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 18.992868] Current Country US, ccode Q2, rev 86
[ 18.997798] Current Country US, ccode Q2, rev 86
[ 19.002787] Current Country US, ccode Q2, rev 86
[ 19.011490] Current Country US, ccode Q2, rev 86
[ 19.023493] Current Country US, ccode Q2, rev 86
[ 19.035970] Current Country US, ccode Q2, rev 86
[ 19.060642] brcmfmac: brcmf_setup_wiphybands: nmode=3, vhtmode=1, vhtmode_init=1 , bw_cap=(0, 7)
[ 20.075202] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 20.086449] ieee80211 phy2: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 20.095124] ieee80211 phy2: brcmf_fil_iovar_data_get: fil_iovar_data_get was toe_ol
[ 20.126983] 0002:04:00.0: CONSOLE: 000009.224 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 20.138007] brcmfmac: brcmf_config_dongle: power save set to disabled
[ 20.145095] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 20.154902] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 20.162212] device wlan2 entered promiscuous mode
[ 20.422332] 0002:04:00.0: CONSOLE: 000009.520 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 20.460983] br0: port 2(wlan2) entered forwarding state
[ 20.466270] br0: port 2(wlan2) entered forwarding state
[ 20.471563] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[ 20.538559] brcmfmac: brcmf_setup_wiphybands: nmode=1, vhtmode=0, vhtmode_init=1 , bw_cap=(3, 0)
[ 20.684547] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 20.720568] 0002:03:00.0: CONSOLE: 000010.278 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 20.731608] brcmfmac: brcmf_config_dongle: power save set to disabled
[ 20.738780] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 20.748579] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 20.756304] device wlan1 entered promiscuous mode
[ 20.822037] 0002:03:00.0: CONSOLE: 000010.380 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 20.865925] br0: port 3(wlan1) entered forwarding state
[ 20.871212] br0: port 3(wlan1) entered forwarding state
[ 20.876537] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 20.909074] random: nonblocking pool is initialized
[ 20.948081] brcmfmac: brcmf_setup_wiphybands: nmode=3, vhtmode=1, vhtmode_init=1 , bw_cap=(0, 7)
[ 21.086846] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 21.098255] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.106046] device wlan0 entered promiscuous mode
[ 21.171435] 0001:01:00.0: CONSOLE: 000011.264 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 21.262958] 0001:01:00.0: CONSOLE: 000011.302 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 21.273622] br0: port 4(wlan0) entered forwarding state
[ 21.278915] br0: port 4(wlan0) entered forwarding state
[ 21.284265] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.362388] Current Country US, ccode Q2, rev 86
[ 21.367372] Current Country US, ccode Q2, rev 86
[ 21.372276] Current Country US, ccode Q2, rev 86
[ 21.381526] Current Country US, ccode Q2, rev 86
[ 21.393657] Current Country US, ccode Q2, rev 86
[ 21.405711] Current Country US, ccode Q2, rev 86
[ 21.832586] device vlan2 entered promiscuous mode
[ 22.079219] tun: Universal TUN/TAP device driver, 1.6
[ 22.084745] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 27.523036] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 27.955051] net_ratelimit: 72 callbacks suppressed
[ 27.959983] ieee80211 phy1: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 27.968678] ieee80211 phy1: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 27.977185] ieee80211 phy2: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 27.979986] CTF: disabled
[ 27.988676] ieee80211 phy2: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 27.996576] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 28.005224] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 28.495934] device vlan2 left promiscuous mode
[ 33.366845] br0: port 1(vlan1) entered forwarding state
[ 35.485807] br0: port 2(wlan2) entered forwarding state
[ 35.885609] br0: port 3(wlan1) entered forwarding state
[ 36.282353] br0: port 4(wlan0) entered forwarding state
~ # il_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 28.005224] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 28.495934] device vlan2 left promiscuous mode
[ 33.366845] br0: port 1(vlan1) entered forwarding state
[ 35.485807] br0: port 2(wlan2) entered forwarding state
[ 35.885609] br0: port 3(wlan1) entered forwarding state
[ 36.282353] br0: port 4(wlan0) entered forwarding state
~ # 0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 28.495934] device vlan2 left promiscuous mode
[ 33.366845] br0: port 1(vlan1) entered forwarding state
[ 35.485807] br0: port 2(wlan2) entered forwarding state
[ 35.885609] br0: port 3(wlan1) entered forwarding state
[ 36.282353] br0: port 4(wlan0) entered forwarding state
^ permalink raw reply [flat|nested] 5+ messages in thread