* [PATCH 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom,ath10k.txt
@ 2016-11-08 15:04 c_traja
2016-11-15 13:39 ` [PATCH 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom, ath10k.txt Valo, Kalle
0 siblings, 1 reply; 2+ messages in thread
From: c_traja @ 2016-11-08 15:04 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, tamizhchelvam
From: Tamizh chelvam <tamizhchelvam@codeaurora.org>
There two things done in this patch.
1) 'btcoex_support' flag for BTCOEX feature support by the hardware.
2) 'wlan_btcoex_gpio' is used to fill wlan priority pin number for
BTCOEX priority feature support.
Signed-off-by: Tamizh chelvam <tamizhchelvam@codeaurora.org>
---
.../bindings/net/wireless/qcom,ath10k.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 74d7f0a..08150e2d 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -46,6 +46,10 @@ Optional properties:
hw versions.
- qcom,ath10k-pre-calibration-data : pre calibration data as an array,
the length can vary between hw versions.
+- btcoex_support : should contain eithr "0" or "1" to indicate btcoex
+ support by the hardware.
+- btcoex_gpio_pin : btcoex gpio pin number for the device which
+ supports BTCOEX.
Example (to supply the calibration data alone):
--
1.7.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom, ath10k.txt
2016-11-08 15:04 [PATCH 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom,ath10k.txt c_traja
@ 2016-11-15 13:39 ` Valo, Kalle
0 siblings, 0 replies; 2+ messages in thread
From: Valo, Kalle @ 2016-11-15 13:39 UTC (permalink / raw)
To: Raja, Tamizh Chelvam
Cc: ath10k@lists.infradead.org, tamizhchelvam@codeaurora.org,
linux-wireless@vger.kernel.org, devicetree@vger.kernel.org
(Adding devicetree list)
<c_traja@qti.qualcomm.com> writes:
> From: Tamizh chelvam <tamizhchelvam@codeaurora.org>
>
> There two things done in this patch.
>
> 1) 'btcoex_support' flag for BTCOEX feature support by the hardware.
> 2) 'wlan_btcoex_gpio' is used to fill wlan priority pin number for
> BTCOEX priority feature support.
>
> Signed-off-by: Tamizh chelvam <tamizhchelvam@codeaurora.org>
> ---
> .../bindings/net/wireless/qcom,ath10k.txt | 4 ++++
> 1 file changed, 4 insertions(+)
As this changes the device tree bindings you need to CC the device tree
list. Please resend the whole patchset (and mark it as v2).
--=20
Kalle Valo=
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-11-15 13:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-08 15:04 [PATCH 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom,ath10k.txt c_traja
2016-11-15 13:39 ` [PATCH 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom, ath10k.txt Valo, Kalle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox