linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2009-12-11 11:41:34 to 2009-12-15 09:43:10 UTC [more...]

[PATCH] wireless: wext: allocate space for NULL-termination for 32byte SSIDs
 2009-12-15  9:43 UTC 

[PATCH 1/6] ath9k: Fix bug in assigning sequence number
 2009-12-15  5:04 UTC  (5+ messages)

Does the RTL8187 mac80211 drivers support master/ap mode?
 2009-12-15  2:50 UTC  (4+ messages)

Function name collisions with mac80211
 2009-12-15  1:42 UTC  (2+ messages)

[PATCH v2.6.33] rt2x00: Fix calculation of rt2800 iveiv entry offset
 2009-12-14 22:32 UTC 

[PATCH 0/2] iwlwifi updates for 2.6.34
 2009-12-14 22:12 UTC  (3+ messages)
` [PATCH 1/2] iwlwifi: on-screen event log dump
` [PATCH 2/2] iwlwifi: remove extra error msg on sensitivity calibration

[PATCH 0/6] iwlwifi fixes for 2.6.33
 2009-12-14 22:12 UTC  (7+ messages)
` [PATCH 1/6] iwlwifi: fix EEPROM/OTP reading endian annotations and a bug
` [PATCH 2/6] iwlwifi: fix more eeprom endian bugs
` [PATCH 3/6] iwl3945: disable power save
` [PATCH 4/6] iwlwifi: initialize spinlock before use
` [PATCH 5/6] iwl3945: fix panic in iwl3945 driver
` [PATCH 6/6] iwlwifi: fix 40MHz operation setting on cards that do not allow it

[PATCH 5/9] drivers/net/wireless: Correct code taking the size of a pointer
 2009-12-14 22:07 UTC  (6+ messages)

[PATCH v2 2.6.33] rt2x00: Disable powersaving for rt61pci and rt2800pci
 2009-12-14 21:34 UTC  (2+ messages)

[PATCH 2.6.33] rt2x00: Fix rt2800usb detection in rt2800lib
 2009-12-14 19:27 UTC  (12+ messages)
` [PATCH 2.6.33] rt2x00: Disable powersaving for rt61pci
          ` [rt2x00-users] "
` [PATCH] rt2x00: Fix rt2800usb detection in rt2800lib

Ethernet bridging with wireless
 2009-12-14 20:21 UTC  (3+ messages)

Revised wireless tree management practices
 2009-12-14 20:09 UTC  (28+ messages)

Compat-wireless for 2.6.32.1
 2009-12-14 19:43 UTC 

[ath9k-devel] 5 MHz and 10 MHz channel bandwidth available on any Atheros agn-Card?
 2009-12-14 19:19 UTC 

ath9k ps poll performance
 2009-12-14 17:45 UTC  (3+ messages)

Compat-wireless for 2.6.32
 2009-12-14 17:44 UTC 

mac80211 or ath9k? No connect to other band after resume
 2009-12-14 17:26 UTC  (3+ messages)

ath5k: 2.6.32-rc6 "no further txbuf available, dropping packet"
 2009-12-14 15:30 UTC  (3+ messages)
  ` ath5k: 2.6.32-rc6

[PATCH 1/2] wireless: support internal statically compiled regulatory database
 2009-12-14 13:54 UTC  (6+ messages)
` [PATCH 2/2] wireless: remove CONFIG_WIRELESS_OLD_REGULATORY

[PATCH] orinoco: fix GFP_KERNEL in orinoco_set_key with interrupts disabled
 2009-12-14 13:53 UTC  (4+ messages)

[PATCH 3/6 v2] ath9k: Stop ANI when doing a reset
 2009-12-14 11:04 UTC 

[PATCH 3/6] ath9k: Stop ANI when doing a reset
 2009-12-14 11:04 UTC  (3+ messages)

[PATCH 4/6] ath9k: Remove ANI lock
 2009-12-14  9:32 UTC 

[PATCH 6/6] ath9k: Fix TX queue draining
 2009-12-14  9:27 UTC 

[PATCH 5/6] ath9k: Fix TX poll routine
 2009-12-14  9:27 UTC 

[PATCH 2/6] ath9k: Clarify Interrupt mitigation
 2009-12-14  9:27 UTC 

cfg80211 connect for at76c50x-usb
 2009-12-14  6:29 UTC  (7+ messages)

2.6.32-git5+, CONFIG_WEXT_PRIV and Broadcom's driver for BCM4322 Wireless chips
 2009-12-13 13:39 UTC  (4+ messages)

[PATCH] rtl8180: Remove usage of deprecated 'qual'
 2009-12-13 13:10 UTC  (3+ messages)

[RFC 1/2] wireless: support internal statically compiled regulatory database
 2009-12-13  8:43 UTC  (3+ messages)
` [RFC 2/2] wireless: remove CONFIG_WIRELESS_OLD_REGULATORY

Multi-channel and Multi-interface Wireless Network
 2009-12-13  2:06 UTC 

[PATCH 00/31] wl1271: patches for wk50
 2009-12-12 21:05 UTC  (39+ messages)
` [PATCH 02/31] wl1271: updated general parameters structure for newer firmwares
` [PATCH 03/31] wl1271: update radio and general parameters values
` [PATCH 04/31] wl1271: added radio parameters configuration values newer firmwares
` [PATCH 05/31] wl1271: use join command with dummy BSSID
` [PATCH 06/31] wl1271: remove workaround for disconnection
` [PATCH 07/31] wl1271: fix tx power setting function
` [PATCH 08/31] wl1271: check result code from the join command
` [PATCH 09/31] wl1271: set null data template when BSSID is known
` [PATCH 10/31] wl1271: use the correct macro when setting the basic rates
` [PATCH 11/31] wl1271: implement dco itrim parameters setting
` [PATCH 12/31] wl1271: fix one typo in the rx_rssi_and_proc_compens values
` [PATCH 13/31] wl1271: add gpio_power file in debugfs to power the chip on and off
` [PATCH 14/31] wl1271: upload only the first 468 bytes from the NVS file
` [PATCH 15/31] wl1271: some new configuration values according to new reference
` [PATCH 16/31] wl1271: use channel 1 when configuring the data path
` [PATCH 17/31] wl1271: Configure smart-reflex paramter values
` [PATCH 18/31] wl1271: Remove smart reflex ACX
` [PATCH 19/31] wl1271: Use slow rates for association messages
` [PATCH 20/31] wl1271: Fix event acknowledging functionality
` [PATCH 21/31] wl1271: prevent power save entry while not associated
` [PATCH 22/31] wl1271: Implement chipset boot retry
` [PATCH 23/31] wl1271: Add pre-power-on sleep
` [PATCH 24/31] wl1271: Remove beacon-loss-ind from PSM entry failure handling
` [PATCH 25/31] wl1271: Add rudimentary ad-hoc support
` [PATCH 26/31] wl1271: Change rates configured for templates
` [PATCH 27/31] wl1271: Fix supported rate management
` [PATCH 28/31] wl1271: Change booleans in struct wl1271 into a flags bitmask
` [PATCH 29/31] wl1271: Add support for acx_pm_config
` [PATCH 30/31] wl1271: Check vif for NULL when indicating beacon-loss
` [PATCH 31/31] wl1271: Prevent performing "join" before association

[PATCH 0/4] off-channel work
 2009-12-12 15:28 UTC  (3+ messages)
` [PATCH 1/4] mac80211: Generalize off-channel operation helpers from scan code
  ` [PATCH 1/4 v2] "

[PATCH] mac80211: remove requeue from work
 2009-12-12 15:29 UTC 

mac80211 noob question
 2009-12-12 11:44 UTC  (6+ messages)

Switching channel in IBSS network doesn't work in ath9k
 2009-12-12  9:40 UTC  (6+ messages)
        ` AW: "

[PATCH] ath9k: Last fix for TX software padding
 2009-12-11 23:22 UTC 

[PATCH] b43: Allow PIO mode to be selected at module load
 2009-12-11 23:19 UTC  (2+ messages)

[PATCH 0/2] Add support for Sphairon Homelink 1202 USB WLAN
 2009-12-11 22:37 UTC  (8+ messages)

pull request: wireless-2.6 2009-12-11
 2009-12-11 22:20 UTC  (2+ messages)

[PATCH 2/2] zd1211rw: improve ejecting of fake CDROM
 2009-12-11 18:07 UTC 

[RFC] mac80211: disallow bridging managed/adhoc interfaces
 2009-12-11 13:58 UTC  (5+ messages)

[PATCH v2 00/31] wl1271: patches for wk50
 2009-12-11 13:41 UTC  (32+ messages)
` [PATCH v2 01/31] wl1271: updated radio parameters structure for newer firmwares
` [PATCH v2 02/31] wl1271: updated general "
` [PATCH v2 03/31] wl1271: update radio and general parameters values
` [PATCH v2 04/31] wl1271: added radio parameters configuration values newer firmwares
` [PATCH v2 05/31] wl1271: use join command with dummy BSSID
` [PATCH v2 06/31] wl1271: remove workaround for disconnection
` [PATCH v2 07/31] wl1271: limit TX power to 25dBm for every channel
` [PATCH v2 08/31] wl1271: check result code from the join command
` [PATCH v2 09/31] wl1271: set null data template when BSSID is known
` [PATCH v2 10/31] wl1271: use the correct macro when setting the basic rates
` [PATCH v2 11/31] wl1271: implement dco itrim parameters setting
` [PATCH v2 12/31] wl1271: fix one typo in the rx_rssi_and_proc_compens values
` [PATCH v2 13/31] wl1271: add gpio_power file in debugfs to power the chip on and off
` [PATCH v2 14/31] wl1271: upload only the first 468 bytes from the NVS file
` [PATCH v2 15/31] wl1271: some new configuration values according to new reference
` [PATCH v2 16/31] wl1271: use channel 1 when configuring the data path
` [PATCH v2 17/31] wl1271: Configure smart-reflex paramter values
` [PATCH v2 18/31] wl1271: Remove smart reflex ACX
` [PATCH v2 19/31] wl1271: Use slow rates for association messages
` [PATCH v2 20/31] wl1271: Fix event acknowledging functionality
` [PATCH v2 21/31] wl1271: prevent power save entry while not associated
` [PATCH v2 22/31] wl1271: Implement chipset boot retry
` [PATCH v2 23/31] wl1271: Add pre-power-on sleep
` [PATCH v2 24/31] wl1271: Remove beacon-loss-ind from PSM entry failure handling
` [PATCH v2 25/31] wl1271: Add rudimentary ad-hoc support
` [PATCH v2 26/31] wl1271: Change rates configured for templates
` [PATCH v2 27/31] wl1271: Fix supported rate management
` [PATCH v2 28/31] wl1271: Change booleans in struct wl1271 into a flags bitmask
` [PATCH v2 29/31] wl1271: Add support for acx_pm_config
` [PATCH v2 30/31] wl1271: Check vif for NULL when indicating beacon-loss
` [PATCH v2 31/31] wl1271: Prevent performing "join" before association


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).