From: Lorenzo Bianconi <lorenzo@kernel.org>
To: nbd@nbd.name
Cc: linux-wireless@vger.kernel.org, lorenzo.bianconi@redhat.com,
sean.wang@mediatek.com, deren.wu@mediatek.com
Subject: Re: [PATCH] mt76: mt7921: move mt7921_init_hw in a dedicated work
Date: Sun, 13 Mar 2022 13:53:21 +0100 [thread overview]
Message-ID: <Yi3pQYQH/3pADHpd@lore-desk> (raw)
In-Reply-To: <0358e31e71481dec87f7ecb3b040db53076ffc4a.1646654230.git.lorenzo@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 4399 bytes --]
> Firmware initialization can take a while. Move mt7921_init_hw routine in
> a dedicated work in order to not slow down bootstrap process.
>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Hi Felix,
let's put this patch on hold for the moment and continue the upstream
discussion. Thanks.
Regards,
Lorenzo
> ---
> .../net/wireless/mediatek/mt76/mt7921/init.c | 66 +++++++++++++------
> .../wireless/mediatek/mt76/mt7921/mt7921.h | 2 +
> 2 files changed, 49 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> index fa6af85bba7b..332af886b95a 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> @@ -165,7 +165,7 @@ static int __mt7921_init_hardware(struct mt7921_dev *dev)
>
> static int mt7921_init_hardware(struct mt7921_dev *dev)
> {
> - int ret, idx, i;
> + int ret, i;
>
> set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state);
>
> @@ -182,6 +182,13 @@ static int mt7921_init_hardware(struct mt7921_dev *dev)
> return ret;
> }
>
> + return 0;
> +}
> +
> +static int mt7921_init_wcid(struct mt7921_dev *dev)
> +{
> + int idx;
> +
> /* Beacon and mgmt frames should occupy wcid 0 */
> idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7921_WTBL_STA - 1);
> if (idx)
> @@ -195,6 +202,42 @@ static int mt7921_init_hardware(struct mt7921_dev *dev)
> return 0;
> }
>
> +static void mt7921_init_work(struct work_struct *work)
> +{
> + struct mt7921_dev *dev = container_of(work, struct mt7921_dev,
> + init_work);
> + int ret;
> +
> + ret = mt7921_init_hardware(dev);
> + if (ret)
> + return;
> +
> + mt76_set_stream_caps(&dev->mphy, true);
> + mt7921_set_stream_he_caps(&dev->phy);
> +
> + ret = mt76_register_device(&dev->mt76, true, mt76_rates,
> + ARRAY_SIZE(mt76_rates));
> + if (ret) {
> + dev_err(dev->mt76.dev, "register device failed\n");
> + return;
> + }
> +
> + ret = mt7921_init_debugfs(dev);
> + if (ret) {
> + dev_err(dev->mt76.dev, "debugfs register failed\n");
> + goto error;
> + }
> +
> + ret = mt76_connac_mcu_set_deep_sleep(&dev->mt76, dev->pm.ds_enable);
> + if (ret)
> + goto error;
> +
> + dev->hw_init_done = true;
> + return;
> +error:
> + mt76_unregister_device(&dev->mt76);
> +}
> +
> int mt7921_register_device(struct mt7921_dev *dev)
> {
> struct ieee80211_hw *hw = mt76_hw(dev);
> @@ -222,6 +265,7 @@ int mt7921_register_device(struct mt7921_dev *dev)
> spin_lock_init(&dev->sta_poll_lock);
>
> INIT_WORK(&dev->reset_work, mt7921_mac_reset_work);
> + INIT_WORK(&dev->init_work, mt7921_init_work);
>
> dev->pm.idle_timeout = MT7921_PM_TIMEOUT;
> dev->pm.stats.last_wake_event = jiffies;
> @@ -234,7 +278,7 @@ int mt7921_register_device(struct mt7921_dev *dev)
> if (mt76_is_sdio(&dev->mt76))
> hw->extra_tx_headroom += MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE;
>
> - ret = mt7921_init_hardware(dev);
> + ret = mt7921_init_wcid(dev);
> if (ret)
> return ret;
>
> @@ -262,23 +306,7 @@ int mt7921_register_device(struct mt7921_dev *dev)
> dev->mphy.hw->wiphy->available_antennas_rx = dev->mphy.chainmask;
> dev->mphy.hw->wiphy->available_antennas_tx = dev->mphy.chainmask;
>
> - mt76_set_stream_caps(&dev->mphy, true);
> - mt7921_set_stream_he_caps(&dev->phy);
> -
> - ret = mt76_register_device(&dev->mt76, true, mt76_rates,
> - ARRAY_SIZE(mt76_rates));
> - if (ret)
> - return ret;
> -
> - ret = mt7921_init_debugfs(dev);
> - if (ret)
> - return ret;
> -
> - ret = mt76_connac_mcu_set_deep_sleep(&dev->mt76, dev->pm.ds_enable);
> - if (ret)
> - return ret;
> -
> - dev->hw_init_done = true;
> + queue_work(system_wq, &dev->init_work);
>
> return 0;
> }
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> index 394a677140da..b6c8f84acb64 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> @@ -204,6 +204,8 @@ struct mt7921_dev {
> struct list_head sta_poll_list;
> spinlock_t sta_poll_lock;
>
> + struct work_struct init_work;
> +
> u8 fw_debug;
>
> struct mt76_connac_pm pm;
> --
> 2.35.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
prev parent reply other threads:[~2022-03-13 12:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-07 11:58 [PATCH] mt76: mt7921: move mt7921_init_hw in a dedicated work Lorenzo Bianconi
2022-03-07 12:00 ` Lorenzo Bianconi
2022-03-07 13:35 ` Deren Wu
2022-03-07 14:27 ` Lorenzo Bianconi
2022-03-07 21:46 ` sean.wang
2022-03-07 22:47 ` Lorenzo Bianconi
2022-03-08 2:27 ` sean.wang
2022-03-13 12:53 ` Lorenzo Bianconi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Yi3pQYQH/3pADHpd@lore-desk \
--to=lorenzo@kernel.org \
--cc=deren.wu@mediatek.com \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=nbd@nbd.name \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox