public inbox for linux-wireless@vger.kernel.org
 help / color / mirror / Atom feed
From: Ping-Ke Shih <pkshih@realtek.com>
To: Andrey Skvortsov <andrej.skvortzov@gmail.com>,
	Kalle Valo <kvalo@kernel.org>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Bitterblue Smith <rtl8821cerfe2@gmail.com>,
	Fiona Klute <fiona.klute@gmx.de>
Subject: RE: [PATCH] wifi: rtw88: enable TX reports for the management queue
Date: Mon, 30 Jun 2025 01:51:13 +0000	[thread overview]
Message-ID: <dbd7eee63629497194901210c46bd704@realtek.com> (raw)
In-Reply-To: <20250628223048.3597641-1-andrej.skvortzov@gmail.com>

Andrey Skvortsov <andrej.skvortzov@gmail.com> wrote:
> This is needed for AP mode. Otherwise client sees the network, but
> can't connect to it.
> 
> REG_FWHW_TXQ_CTRL+1 is set to WLAN_TXQ_RPT_EN (0x1F) in common mac
> init function (__rtw8723x_mac_init), but the value was overwritten
> from mac table later.

Since the tables were copied from vendor driver, I suspect people might
overwrite the tables again resulting in regression. 

So we can add a mac_post_init to set the value after loading parameters:

  rtw_mac_init(rtwdev); // not set REG_FWHW_TXQ_CTRL+1 to WLAN_TXQ_RPT_EN

  chip->ops->phy_set_param(rtwdev); // "0x421, 0x0000000F," by table

  rtw_mac_postinit(rtwdev); // set REG_FWHW_TXQ_CTRL+1 to WLAN_TXQ_RPT_EN 

Only rtw8703b/rtw8723d implement postinit ops.

> 
> Tested on rtl8723cs, that reuses rtw8703b driver.
> 
> Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
> ---
>  drivers/net/wireless/realtek/rtw88/rtw8703b_tables.c | 1 -
>  drivers/net/wireless/realtek/rtw88/rtw8723d_table.c  | 1 -
>  2 files changed, 2 deletions(-)
> 
> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8703b_tables.c
> b/drivers/net/wireless/realtek/rtw88/rtw8703b_tables.c
> index 81020fd907aa6..fe4b112f582ba 100644
> --- a/drivers/net/wireless/realtek/rtw88/rtw8703b_tables.c
> +++ b/drivers/net/wireless/realtek/rtw88/rtw8703b_tables.c
> @@ -199,7 +199,6 @@ static const u32 rtw8703b_mac[] = {
>         0x035, 0x00000000,
>         0x067, 0x00000002,
>         0x092, 0x00000080,
> -       0x421, 0x0000000F,
>         0x428, 0x0000000A,
>         0x429, 0x00000010,
>         0x430, 0x00000000,
> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8723d_table.c
> b/drivers/net/wireless/realtek/rtw88/rtw8723d_table.c
> index 27a22b392df00..bc7c6111782b2 100644
> --- a/drivers/net/wireless/realtek/rtw88/rtw8723d_table.c
> +++ b/drivers/net/wireless/realtek/rtw88/rtw8723d_table.c
> @@ -10,7 +10,6 @@ static const u32 rtw8723d_mac[] = {
>         0x020, 0x00000013,
>         0x02F, 0x00000010,
>         0x077, 0x00000007,
> -       0x421, 0x0000000F,
>         0x428, 0x0000000A,
>         0x429, 0x00000010,
>         0x430, 0x00000000,
> --
> 2.47.2


  reply	other threads:[~2025-06-30  1:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-28 22:30 [PATCH] wifi: rtw88: enable TX reports for the management queue Andrey Skvortsov
2025-06-30  1:51 ` Ping-Ke Shih [this message]
2025-07-09 22:20   ` Andrey Skvortsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dbd7eee63629497194901210c46bd704@realtek.com \
    --to=pkshih@realtek.com \
    --cc=andrej.skvortzov@gmail.com \
    --cc=fiona.klute@gmx.de \
    --cc=kvalo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=rtl8821cerfe2@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox