From: Sebastian Gottschall <s.gottschall@dd-wrt.com>
To: Balaji Pothunoori <bpothuno@qti.qualcomm.com>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH] ath10k: handling qos at STA side based on AP WMM enable/disable
Date: Wed, 29 Nov 2017 09:33:36 +0100 [thread overview]
Message-ID: <e84f2a95-178b-dc07-bc6e-9dc779e0db0f@dd-wrt.com> (raw)
In-Reply-To: <e93273148ad44a54bfb39bc7018bfcc0@aptaiexm02b.ap.qualcomm.com>
Am 29.11.2017 um 07:58 schrieb Balaji Pothunoori:
> Hi Sebastian,
>
> If I am not wrong you are seeing the issue with WRT3200ACM (Marvell 88W8964) as client + QCA9984 (FW : 10.4-3.5.3-00038) as AP with below change you are seeing the crash while running traffic between the WRT3200ACM + QCA9984 ?
> Do you used any other client in place of WRT3200ACM ?
there is not much traffic required. as it seems the firmware crashes
immediatly after association. the issue is also not present in
10.4-3.4-0082ww
> Can you share the more details on firmware crash ?
so a firmware crashdump from log? i'll try to get it within the next
hours. just need to resetup the test scenario
Sebastian
>
> Regards,
> Balaji.
>
> -----Original Message-----
> From: Sebastian Gottschall [mailto:s.gottschall@dd-wrt.com]
> Sent: Wednesday, November 29, 2017 8:28 AM
> To: Balaji Pothunoori <bpothuno@qti.qualcomm.com>; ath10k@lists.infradead.org
> Cc: linux-wireless@vger.kernel.org
> Subject: Re: [PATCH] ath10k: handling qos at STA side based on AP WMM enable/disable
>
> did you notice that Marvell 88W8964 based clients will crash 10.4-3.5.3 firmwares? (tested with 9984 and 10.4-3.5.3-00038) client device was a linksys wrt3200acm running dd-wrt for testing
>
> Am 28.11.2017 um 11:07 schrieb bpothuno@qti.qualcomm.com:
>> From: Balaji Pothunoori <bpothuno@qti.qualcomm.com>
>>
>> Data packets are not sent by STA in case of STA joined to non QOS AP
>> (WMM disabled AP). This is happening because of STA is sending data
>> packets to firmware from host with qos enabled along with non qos
>> queue value(TID = 16).
>> Due to qos enabled, firmware is discarding the packet.
>>
>> This patch fixes this issue by updating the qos based on station WME
>> capability field if WMM is disabled in AP.
>>
>> This patch is required by 10.4 family chipsets like
>> QCA4019/QCA9888/QCA9884/QCA99X0.
>> Firmware Versoin : 10.4-3.5.1-00018.
>>
>> For 10.2.4 family chipsets QCA988X/QCA9887 and QCA6174 this patch has
>> no effect.
>>
>> Signed-off-by: Balaji Pothunoori <bpothuno@qti.qualcomm.com>
>> ---
>> drivers/net/wireless/ath/ath10k/mac.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/wireless/ath/ath10k/mac.c
>> b/drivers/net/wireless/ath/ath10k/mac.c
>> index 0a947ee..2616b99 100644
>> --- a/drivers/net/wireless/ath/ath10k/mac.c
>> +++ b/drivers/net/wireless/ath/ath10k/mac.c
>> @@ -2563,7 +2563,7 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
>> }
>> break;
>> case WMI_VDEV_TYPE_STA:
>> - if (vif->bss_conf.qos)
>> + if (sta->wme)
>> arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
>> break;
>> case WMI_VDEV_TYPE_IBSS:
>
> --
> Mit freundlichen Grüssen / Regards
>
> Sebastian Gottschall / CTO
>
> NewMedia-NET GmbH - DD-WRT
> Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
> Registergericht: Amtsgericht Darmstadt, HRB 25473
> Geschäftsführer: Peter Steinhäuser, Christian Scheele http://www.dd-wrt.com
> email: s.gottschall@dd-wrt.com
> Tel.: +496251-582650 / Fax: +496251-5826565
>
--
Mit freundlichen Grüssen / Regards
Sebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottschall@dd-wrt.com
Tel.: +496251-582650 / Fax: +496251-5826565
next prev parent reply other threads:[~2017-11-29 8:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-28 10:07 [PATCH] ath10k: handling qos at STA side based on AP WMM enable/disable bpothuno
2017-11-29 2:57 ` Sebastian Gottschall
2017-11-29 6:58 ` Balaji Pothunoori
2017-11-29 8:33 ` Sebastian Gottschall [this message]
2017-11-29 10:12 ` Balaji Pothunoori
2017-11-29 13:38 ` Sebastian Gottschall
2017-11-30 5:24 ` Balaji Pothunoori
2017-12-14 15:19 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e84f2a95-178b-dc07-bc6e-9dc779e0db0f@dd-wrt.com \
--to=s.gottschall@dd-wrt.com \
--cc=ath10k@lists.infradead.org \
--cc=bpothuno@qti.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox