* [RFC 45/53] wireless-regdb: MY, Malaysia - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on 5 GHz, updates the
max EIRP and adds a new 5 GHz range:
* 5170 - 5250 MHz
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/db.txt b/db.txt
index 16d9f8c..fa8502c 100644
--- a/db.txt
+++ b/db.txt
@@ -548,8 +548,9 @@ country MT: DFS-ETSI
country MY:
(2402 - 2482 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 30), DFS
- (5735 - 5835 @ 40), (N/A, 30)
+ (5170 - 5250 @ 80), (N/A, 17)
+ (5250 - 5330 @ 80), (N/A, 23), DFS
+ (5735 - 5835 @ 80), (N/A, 30)
country MX:
(2402 - 2472 @ 40), (3, 27)
--
1.7.10.4
^ permalink raw reply related
* [RFC 44/53] wireless-regdb: KW, Kuwait - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on 5 GHz.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/db.txt b/db.txt
index a4d0587..16d9f8c 100644
--- a/db.txt
+++ b/db.txt
@@ -469,8 +469,8 @@ country KR:
country KW:
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
country KZ:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [RFC 43/53] wireless-regdb: IL, Isreal - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on 5 GHz.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/db.txt b/db.txt
index a101b1e..a4d0587 100644
--- a/db.txt
+++ b/db.txt
@@ -394,8 +394,8 @@ country IE: DFS-ETSI
country IL:
(2402 - 2482 @ 40), (N/A, 20)
- (5150 - 5250 @ 40), (N/A, 200 mW), NO-OUTDOOR
- (5250 - 5350 @ 40), (N/A, 200 mW), NO-OUTDOOR, DFS
+ (5150 - 5250 @ 80), (N/A, 200 mW), NO-OUTDOOR
+ (5250 - 5350 @ 80), (N/A, 200 mW), NO-OUTDOOR, DFS
country IN:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [RFC 42/53] wireless-regdb: ID, Indonesia - enable 5 GHz and VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Pursuant to:
http://www.postel.go.id/content/ID/regulasi/standardisasi/kepdir/bwa%205,8%20ghz.pdf,
provide a 5GHz rule for Indonesian regulatory domain. QCA has
also verified VHT80 can be enabled. Patch originally posted by
Paul Stewart <pstew@chromium.org>, I just modified to enable 80 MHz
bandwidth.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/db.txt b/db.txt
index 0ebb934..a101b1e 100644
--- a/db.txt
+++ b/db.txt
@@ -380,7 +380,9 @@ country HU: DFS-ETSI
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
country ID:
+ # ref: http://www.postel.go.id/content/ID/regulasi/standardisasi/kepdir/bwa%205,8%20ghz.pdf
(2402 - 2482 @ 40), (N/A, 20)
+ (5735 - 5815 @ 20), (N/A, 20)
country IE: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [RFC 41/53] wireless-regdb: US, United States - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth support on the US 5 GHz
frequencies. This also updates the 5 GHz bands with higher
max EIRP.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/db.txt b/db.txt
index 63ee9b4..0ebb934 100644
--- a/db.txt
+++ b/db.txt
@@ -767,11 +767,11 @@ country UA:
country US: DFS-FCC
(2402 - 2472 @ 40), (3, 27)
- (5170 - 5250 @ 40), (3, 17)
- (5250 - 5330 @ 40), (3, 20), DFS
- (5490 - 5600 @ 40), (3, 20), DFS
- (5650 - 5710 @ 40), (3, 20), DFS
- (5735 - 5835 @ 40), (3, 30)
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5600 @ 80), (3, 24), DFS
+ (5650 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
# 60g band
# reference: http://cfr.regstoday.com/47cfr15.aspx#47_CFR_15p255
# channels 1,2,3, EIRP=40dBm(43dBm peak)
--
1.7.10.4
^ permalink raw reply related
* [RFC 40/53] wireless-regdb: enable VHT80 and VHT160 for JP
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
As per Michael Green we can enable VHT80 and VHT160 on
the enabled JP channels now. I've enabled them only for
the channels where either 80 MHz or 160 MHz actually fits
on the channel spacing for the band defined.
When passed to the kernel I have verified we get:
cfg80211: Regulatory domain changed to country: JP
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2300 mBm)
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index ead6646..63ee9b4 100644
--- a/db.txt
+++ b/db.txt
@@ -433,9 +433,9 @@ country JP:
(2474 - 2494 @ 20), (N/A, 20), NO-OFDM
(4910 - 4990 @ 40), (N/A, 23)
(5030 - 5090 @ 40), (N/A, 23)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 23), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 160), (N/A, 23), DFS
country JO:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [RFC 39/53] wireless-regdb: CN, China - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enable 80 MHz on the 5 GHz band.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/db.txt b/db.txt
index 4f2d4e7..ead6646 100644
--- a/db.txt
+++ b/db.txt
@@ -164,7 +164,7 @@ country CL:
country CN:
(2402 - 2482 @ 40), (N/A, 20)
- (5735 - 5835 @ 40), (N/A, 30)
+ (5735 - 5835 @ 80), (N/A, 30)
# 60 gHz band channels 1,4: 28dBm, channels 2,3: 44dBm
# ref: http://www.miit.gov.cn/n11293472/n11505629/n11506593/n11960250/n11960606/n11960700/n12330791.files/n12330790.pdf
(57240 - 59400 @ 2160), (N/A, 28)
--
1.7.10.4
^ permalink raw reply related
* [RFC 38/53] wireless-regdb: TR, Turkey - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies and also adds a new frequency 5 GHz range:
* 5490 - 5710 MHz
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/db.txt b/db.txt
index f19f637..4f2d4e7 100644
--- a/db.txt
+++ b/db.txt
@@ -746,8 +746,9 @@ country TN:
country TR: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 20), (N/A, 20)
- (5250 - 5330 @ 20), (N/A, 20), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 37/53] wireless-regdb: CH, Switzerland - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index ab718f3..f19f637 100644
--- a/db.txt
+++ b/db.txt
@@ -150,9 +150,9 @@ country CA:
country CH: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 36/53] wireless-regdb: SE, Sweden - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index bf4eea1..ab718f3 100644
--- a/db.txt
+++ b/db.txt
@@ -682,9 +682,9 @@ country SA:
country SE: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 35/53] wireless-regdb: ES, Spain - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index ce61f97..bf4eea1 100644
--- a/db.txt
+++ b/db.txt
@@ -272,9 +272,9 @@ country EG:
country ES: DFS-ETSI
(2400 - 2483.5 @ 40), (N/A, 100 mW)
- (5150 - 5250 @ 40), (N/A, 100 mW), NO-OUTDOOR
- (5250 - 5350 @ 40), (N/A, 100 mW), NO-OUTDOOR, DFS
- (5470 - 5725 @ 40), (N/A, 500 mW), DFS
+ (5150 - 5250 @ 80), (N/A, 100 mW), NO-OUTDOOR
+ (5250 - 5350 @ 80), (N/A, 100 mW), NO-OUTDOOR, DFS
+ (5470 - 5725 @ 80), (N/A, 500 mW), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 34/53] wireless-regdb: SK, Slovakia - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index f411ae3..ce61f97 100644
--- a/db.txt
+++ b/db.txt
@@ -705,9 +705,9 @@ country SI: DFS-ETSI
country SK: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 33/53] wireless-regdb: PT, Portugal - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 2f71dba..f411ae3 100644
--- a/db.txt
+++ b/db.txt
@@ -630,9 +630,9 @@ country PL: DFS-ETSI
country PT: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 32/53] wireless-regdb: PL, Poland - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 8f8e8fc..2f71dba 100644
--- a/db.txt
+++ b/db.txt
@@ -622,9 +622,9 @@ country PK:
country PL: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 31/53] wireless-regdb: NL, Netherlands - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 04a176e..8f8e8fc 100644
--- a/db.txt
+++ b/db.txt
@@ -558,9 +558,9 @@ country MX:
country NL: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20), NO-OUTDOOR
- (5250 - 5330 @ 40), (N/A, 20), NO-OUTDOOR, DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20), NO-OUTDOOR
+ (5250 - 5330 @ 80), (N/A, 20), NO-OUTDOOR, DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 30/53] wireless-regdb: LU, Luxembourg - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index b8ddd9e..04a176e 100644
--- a/db.txt
+++ b/db.txt
@@ -500,9 +500,9 @@ country LT: DFS-ETSI
country LU: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 29/53] wireless-regdb: IT, Italy - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 88ba709..b8ddd9e 100644
--- a/db.txt
+++ b/db.txt
@@ -415,9 +415,9 @@ country IR:
country IT: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 28/53] wireless-regdb: IE, Ireland - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 7077b53..88ba709 100644
--- a/db.txt
+++ b/db.txt
@@ -384,9 +384,9 @@ country ID:
country IE: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 27/53] wireless-regdb: GR, Greece- enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 3790d4e..7077b53 100644
--- a/db.txt
+++ b/db.txt
@@ -318,9 +318,9 @@ country GD:
country GR: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 26/53] wireless-regdb: FI, Finland - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 26cc023..3790d4e 100644
--- a/db.txt
+++ b/db.txt
@@ -280,9 +280,9 @@ country ES: DFS-ETSI
country FI: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 25/53] wireless-regdb: DK, Denmark - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 94be114..26cc023 100644
--- a/db.txt
+++ b/db.txt
@@ -236,9 +236,9 @@ country DE: DFS-ETSI
country DK: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 24/53] wireless-regdb: CZ, Czech Republic - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 5e17129..94be114 100644
--- a/db.txt
+++ b/db.txt
@@ -204,9 +204,9 @@ country CY: DFS-ETSI
# implemented.
country CZ: DFS-ETSI
(2400 - 2483.5 @ 40), (N/A, 100 mW)
- (5150 - 5250 @ 40), (N/A, 200 mW), NO-OUTDOOR
- (5250 - 5350 @ 40), (N/A, 100 mW), NO-OUTDOOR, DFS
- (5470 - 5725 @ 40), (N/A, 500 mW), DFS
+ (5150 - 5250 @ 80), (N/A, 200 mW), NO-OUTDOOR
+ (5250 - 5350 @ 80), (N/A, 100 mW), NO-OUTDOOR, DFS
+ (5470 - 5725 @ 80), (N/A, 500 mW), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 23/53] wireless-regdb: BE, Belgium - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index fd0ef09..5e17129 100644
--- a/db.txt
+++ b/db.txt
@@ -89,9 +89,9 @@ country BD:
country BE: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 22/53] wireless-regdb: GB, United Kingdom - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index b58d4e2..fd0ef09 100644
--- a/db.txt
+++ b/db.txt
@@ -303,9 +303,9 @@ country GE:
country GB: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [RFC 21/53] wireless-regdb: DE, Germany - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 15e413e..b58d4e2 100644
--- a/db.txt
+++ b/db.txt
@@ -226,11 +226,11 @@ country DE: DFS-ETSI
# entries 279004 and 280006
(2400 - 2483.5 @ 40), (N/A, 100 mW)
# entry 303005
- (5150 - 5250 @ 40), (N/A, 100 mW), NO-OUTDOOR
+ (5150 - 5250 @ 80), (N/A, 100 mW), NO-OUTDOOR
# entries 304002 and 305002
- (5250 - 5350 @ 40), (N/A, 100 mW), NO-OUTDOOR, DFS
+ (5250 - 5350 @ 80), (N/A, 100 mW), NO-OUTDOOR, DFS
# entries 308002, 309001 and 310003
- (5470 - 5725 @ 40), (N/A, 500 mW), DFS
+ (5470 - 5725 @ 80), (N/A, 500 mW), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox