* [RFC 45/53] wireless-regdb: MY, Malaysia - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on 5 GHz, updates the
max EIRP and adds a new 5 GHz range:
* 5170 - 5250 MHz
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/db.txt b/db.txt
index 16d9f8c..fa8502c 100644
--- a/db.txt
+++ b/db.txt
@@ -548,8 +548,9 @@ country MT: DFS-ETSI
country MY:
(2402 - 2482 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 30), DFS
- (5735 - 5835 @ 40), (N/A, 30)
+ (5170 - 5250 @ 80), (N/A, 17)
+ (5250 - 5330 @ 80), (N/A, 23), DFS
+ (5735 - 5835 @ 80), (N/A, 30)
country MX:
(2402 - 2472 @ 40), (3, 27)
--
1.7.10.4
^ permalink raw reply related
* [RFC 46/53] wireless-regdb: MA, Morocco - enable 5 GHz and VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This adds 5 GHz support for Morocco with VHT80 support.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/db.txt b/db.txt
index fa8502c..aa41626 100644
--- a/db.txt
+++ b/db.txt
@@ -523,6 +523,8 @@ country MC: DFS-ETSI
country MA:
(2402 - 2482 @ 40), (N/A, 20)
+ (5170 - 5250 @ 80), (N/A, 23)
+ (5735 - 5835 @ 80), (N/A, 23)
country MO:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [RFC 47/53] wireless-regdb: enable HT40 in RU - Russian Federation
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
As per QCA the Russian Federation (RU) enables
HT40 on the 5 GHz band as follows. This has been
verified by actual product submission and product
certification.
Band [MHz] Max BW [MHz] Max gain Max EIRP [dBm (mW)]
5170-5330 40 N/A 20.00 (100.00)
5650-5710 40 N/A 30.00 (1000.00)
5735.000 - 5835.000 40 N/A 30.00 (1000.00)
Prior to this we didn't have HT40 allowed on RU at all.
This patch changes this and splits the 5 GHz band into
two segments which allow two different max EIRP values.
Exact details on the 5 GHz QCA work for Russia you can
refer to this PDF:
http://lists.infradead.org/pipermail/wireless-regdb/attachments/20130125/29d3fa1f/attachment-0001.pdf
Originally submitted to the list by Michael Green.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/db.txt b/db.txt
index aa41626..330ccb2 100644
--- a/db.txt
+++ b/db.txt
@@ -672,7 +672,9 @@ country RS:
country RU:
(2402 - 2482 @ 40), (N/A, 20)
- (5735 - 5835 @ 20), (N/A, 30)
+ (5170 - 5330 @ 40), (N/A, 20)
+ (5650 - 5710 @ 40), (N/A, 30)
+ (5735 - 5835 @ 40), (N/A, 30)
country RW:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [RFC 48/53] wireless-regdb: KR, Republic of Korea - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage for 5 GHz.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/db.txt b/db.txt
index 330ccb2..9765ad8 100644
--- a/db.txt
+++ b/db.txt
@@ -462,10 +462,10 @@ country KP:
country KR:
(2402 - 2482 @ 20), (N/A, 20)
- (5170 - 5250 @ 20), (3, 20)
- (5250 - 5330 @ 20), (3, 20), DFS
- (5490 - 5630 @ 20), (3, 30), DFS
- (5735 - 5815 @ 20), (3, 30)
+ (5170 - 5250 @ 80), (3, 20)
+ (5250 - 5330 @ 80), (3, 20), DFS
+ (5490 - 5630 @ 80), (3, 30), DFS
+ (5735 - 5815 @ 80), (3, 30)
country KW:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [RFC 49/53] wireless-regdb: TW, Taiwan - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage and enables a new
5 GHz band:
* 5490 - 5710 MHz
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/db.txt b/db.txt
index 9765ad8..7b1e6e8 100644
--- a/db.txt
+++ b/db.txt
@@ -729,8 +729,9 @@ country SY:
country TW:
(2402 - 2472 @ 40), (3, 27)
- (5270 - 5330 @ 40), (3, 17), DFS
- (5735 - 5815 @ 40), (3, 30)
+ (5270 - 5330 @ 80), (3, 17), DFS
+ (5490 - 5710 @ 80), (3, 30), DFS
+ (5735 - 5815 @ 80), (3, 30)
country TH:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [RFC 50/53] wireless-regdb: enable VHT80 when world roaming
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
For VHT, the wider bandwidths (up to 160 MHz) need
to be allowed. Since world roaming only covers the
case of connecting to an AP, it can be opened up
there, we will rely on the AP to know the local
regulations.
Based on a patch by Johannes Berg for upstream Linux.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/db.txt b/db.txt
index 7b1e6e8..767aee3 100644
--- a/db.txt
+++ b/db.txt
@@ -6,10 +6,10 @@ country 00:
# Channel 14. Only JP enables this and for 802.11b only
(2474 - 2494 @ 20), (3, 20), PASSIVE-SCAN, NO-IBSS, NO-OFDM
# Channel 36 - 48
- (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
+ (5170 - 5250 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS
# NB: 5260 MHz - 5700 MHz requies DFS
# Channel 149 - 165
- (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
+ (5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS
country AD:
--
1.7.10.4
^ permalink raw reply related
* [RFC 51/53] wireless-regdb: add 802.11ad 60 GHz channels 1..3 to world regdom
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This is a port of what Vladimir Kondratiev sent to the
Linux kernel for the static world regulatory domain.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/db.txt b/db.txt
index 767aee3..b4f9ffa 100644
--- a/db.txt
+++ b/db.txt
@@ -10,6 +10,8 @@ country 00:
# NB: 5260 MHz - 5700 MHz requies DFS
# Channel 149 - 165
(5735 - 5835 @ 80), (3, 20), PASSIVE-SCAN, NO-IBSS
+ # IEEE 802.11ad (60GHz), channels 1..3
+ (57240 - 63720 @ 2160), (N/A, 0)
country AD:
--
1.7.10.4
^ permalink raw reply related
* [RFC 52/53] wireless-regdb: CR, Costa Rica - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage for Costa Rica,
updates the max EIRP and adds a new 5 GHz band:
* 5490 - 5710
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index b4f9ffa..43a062f 100644
--- a/db.txt
+++ b/db.txt
@@ -182,9 +182,10 @@ country CO:
country CR:
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 20), (3, 17)
- (5250 - 5330 @ 20), (3, 23), DFS
- (5735 - 5835 @ 20), (3, 30)
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
country CS:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [RFC 53/53] wireless-regdb: EC, Ecauador - enable VHT80
From: Luis R. Rodriguez @ 2013-07-04 1:04 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1372899889-19183-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage for Ecuador,
updates the max EIRP and adds a new 5 GHz band:
* 5490 - 5710
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 43a062f..f9a3350 100644
--- a/db.txt
+++ b/db.txt
@@ -256,9 +256,10 @@ country DZ:
country EC:
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 20), (3, 17)
- (5250 - 5330 @ 20), (3, 23), DFS
- (5735 - 5835 @ 20), (3, 30)
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
country EE: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* Re: [PATCH] brcm: add brcmfmac sdio firmware for bcm43241
From: Ben Hutchings @ 2013-07-04 2:22 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Linux Wireless, Franky Lin, David Woodhouse
In-Reply-To: <1369833235-3642-1-git-send-email-arend@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 2585 bytes --]
On Wed, 2013-05-29 at 15:13 +0200, Arend van Spriel wrote:
> From: Franky Lin <frankyl@broadcom.com>
>
> Add missing firmware file for the BCM43241 SDIO device. The firmware
> version is v6.10.170.4
>
> Reported-by: Alex Courbot <acourbot@nvidia.com>
> Signed-off-by: Franky Lin <frankyl@broadcom.com>
> Signed-off-by: Arend van Spriel <arend@broadcom.com>
> ---
> Hi Ben,
>
> Somehow this firmware got forgotten although brcmfmac has support for
> the device for a while now.
>
> Regards,
> Arend
> ---
> WHENCE | 1 +
> brcm/brcmfmac43241.bin | Bin 0 -> 414238 bytes
> 2 files changed, 1 insertion(+)
> create mode 100644 brcm/brcmfmac43241.bin
>
> diff --git a/WHENCE b/WHENCE
> index ef64612..5eca1d0 100644
> --- a/WHENCE
> +++ b/WHENCE
> @@ -1652,6 +1652,7 @@ Driver: brcmfmac - Broadcom 802.11n fullmac wireless LAN driver.
>
> File: brcm/bcm4329-fullmac-4.bin
> File: brcm/brcmfmac43236b.bin
> +File: brcm/brcmfmac43241.bin
> File: brcm/brcmfmac4329.bin
> File: brcm/brcmfmac4330.bin
> File: brcm/brcmfmac4334.bin
[...]
Unless you're doing something very clever with macros, I don't believe
you've posted any driver code that uses this file... or several of the
others. The current driver in net-next (I don't know what you've sent
to Nvidia) appears to request only these files:
- brcm/brcmfmac43143.bin
- brcm/brcmfmac43236b.bin
- brcm/brcmfmac43242a.bin
- brcm/brcmfmac-sdio.bin
- brcm/brcmfmac-sdio.txt
Looking through the git history, I can see that various other names have
been used:
- brcm/bcm4329-fullmac-4.bin (renamed to brcm/brcmfmac-sdio.bin)
- brcm/bcm4329-fullmac-4.txt (renamed to brcm/brcmfmac-sdio.txt)
- brcm/brcmfmac-usb.bin (renamed to brcm/brcmfmac43236b.bin)
- brcm/brcmfmac.bin (renamed to brcm/brcmfmac-sdio.bin)
- brcm/brcmfmac.txt (renamed to brcm/brcmfmac-sdio.txt)
So I think, before this patch is applied, you owe me and David patches
to:
1. Add brcm/brcmfmac43143.bin, brcm/brcmfmac43242a.bin and
brcm/brcmfmac-sdio.txt.
2. Rename brcm/bcm4329-fullmac-4.bin to brcm/brcmfmac-sdio.bin.
3. Add symlinks from all the old names to the new names. (As
linux-firmware should support old in-tree drivers indefinitely.)
and you owe linux-wireless some driver patches.
linux-firmware.git is not the appropriate place to send firmware used
only by out-of-tree code, and any firmware blob that has never been
referenced by in-tree code is subject to removal.
Ben.
--
Ben Hutchings
Tomorrow will be cancelled due to lack of interest.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply
* Re: [PATCH] iwlwifi: add firmware for 7260 / 3160 devices
From: Ben Hutchings @ 2013-07-04 2:29 UTC (permalink / raw)
To: Emmanuel Grumbach
Cc: linux-wireless, Bjorn Mork, Johannes Berg, David Woodhouse
In-Reply-To: <1372075552-3253-1-git-send-email-emmanuel.grumbach@intel.com>
[-- Attachment #1: Type: text/plain, Size: 700 bytes --]
On Mon, 2013-06-24 at 15:05 +0300, Emmanuel Grumbach wrote:
> Add new firmware for new devices: 7260 and 3160
> version:
> 22.0.7.0
>
> Cc: Johannes Berg <johannes.berg@intel.com>
> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
> ---
> LICENCE.iwlwifi_firmware | 2 +-
> WHENCE | 6 ++++++
> iwlwifi-3160-7.ucode | Bin 0 -> 670172 bytes
> iwlwifi-7260-7.ucode | Bin 0 -> 682892 bytes
> 4 files changed, 7 insertions(+), 1 deletion(-)
> create mode 100644 iwlwifi-3160-7.ucode
> create mode 100644 iwlwifi-7260-7.ucode
[...]
Applied, thanks.
Ben.
--
Ben Hutchings
Tomorrow will be cancelled due to lack of interest.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply
* Re: Use of 5GHz frequencies with Wi-Fi Direct
From: Gagan Goyal @ 2013-07-04 2:59 UTC (permalink / raw)
To: Kévin THIERRY; +Cc: linux-wireless, ronan lanoe
In-Reply-To: <51D41899.1010608@kaiwen.me>
It seems that peer device is configured to use 2.4 Ghz channel.
Plz share the complete connection logs to confirm.
//Gagan
On 7/3/13, Kévin THIERRY <kevin.thierry@kaiwen.me> wrote:
> I'm using an Atheros WB222 Wi-Fi card.
>
> $ iw list
>
> [...]
> /Frequencies://
> //* 5180 MHz [36] (15.0 dBm) (passive scanning, no IBSS)//
> //* 5200 MHz [40] (15.0 dBm) (passive scanning, no IBSS)//
> //* 5220 MHz [44] (15.0 dBm) (passive scanning, no IBSS)//
> //* 5240 MHz [48] (15.0 dBm) (passive scanning, no IBSS)//
> //* 5260 MHz [52] (17.0 dBm) (passive scanning, no IBSS, radar detection)//
> //* 5280 MHz [56] (15.0 dBm) (passive scanning, no IBSS, radar detection)//
> //* 5300 MHz [60] (15.0 dBm) (passive scanning, no IBSS, radar detection)//
> //* 5320 MHz [64] (15.0 dBm) (passive scanning, no IBSS, radar detection)//
> //* 5500 MHz [100] (disabled)//
> //* 5520 MHz [104] (disabled)//
> //* 5540 MHz [108] (disabled)//
> //* 5560 MHz [112] (disabled)//
> //* 5580 MHz [116] (disabled)//
> //* 5600 MHz [120] (disabled)//
> //* 5620 MHz [124] (disabled)//
> //* 5640 MHz [128] (disabled)//
> //* 5660 MHz [132] (disabled)//
> //* 5680 MHz [136] (disabled)//
> //* 5700 MHz [140] (disabled)//
> //* 5745 MHz [149] (17.0 dBm) (passive scanning, no IBSS)//
> //* 5765 MHz [153] (17.0 dBm) (passive scanning, no IBSS)//
> //* 5785 MHz [157] (17.0 dBm) (passive scanning, no IBSS)//
> //* 5805 MHz [161] (17.0 dBm) (passive scanning, no IBSS)//
> //* 5825 MHz [165] (17.0 dBm) (passive scanning, no IBSS)/
> [...]
>
>
> wpa_supplicant config file :
>
> /ctrl_interface=/var/run/wpa_supplicant//
> //ap_scan=1//
> //device_name=kevin_PC//
> //device_type=1-0050F204-1//
> //p2p_oper_reg_class=115//
> //p2p_oper_channel=36//
> //country=US/
>
>
> wpa_supplicant debug at start :
>
> /ctrl_interface='/var/run/wpa_supplicant'//
> //ap_scan=1//
> //device_name='kevin_PC'//
> //p2p_oper_reg_class=115//
> //p2p_oper_channel=36//
> //country='US'//
> //nl80211: interface wlan5 in phy phy0//
> //rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0//
> //rfkill: initial event: idx=1 type=2 op=0 soft=1 hard=0//
> //nl80211: Set mode ifindex 4 iftype 2 (STATION)//
> //nl80211: Subscribe to mgmt frames with non-AP handle 0x1e332f0//
> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
> //nl80211: Register frame match - hexdump(len=2): 04 0a//
> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
> //nl80211: Register frame match - hexdump(len=2): 04 0b//
> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
> //nl80211: Register frame match - hexdump(len=2): 04 0c//
> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
> //nl80211: Register frame match - hexdump(len=2): 04 0d//
> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
> //nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09//
> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
> //nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09//
> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
> //nl80211: Register frame match - hexdump(len=1): 06//
> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
> //nl80211: Register frame match - hexdump(len=2): 0a 07//
> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
> //nl80211: Register frame match - hexdump(len=2): 0a 11//
> //netlink: Operstate: linkmode=1, operstate=5//
> //nl80211: Using driver-based off-channel TX//
> //nl80211: TDLS supported//
> //nl80211: TDLS external setup//
> //nl80211: Use separate P2P group interface (driver advertised support)//
> //nl80211: driver param='(null)'//
> //nl80211: Regulatory information - country=US//
> //nl80211: 2402-2472 @ 40 MHz//
> //nl80211: 5170-5250 @ 40 MHz//
> //nl80211: 5250-5330 @ 40 MHz//
> //nl80211: 5490-5600 @ 40 MHz//
> //nl80211: 5650-5710 @ 40 MHz//
> //nl80211: 5735-5835 @ 40 MHz//
> //nl80211: Added 802.11b mode based on 802.11g information//
> //wlan5: Own MAC address: 00:0b:6b:7f:92:56//
> //wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=0
> set_tx=0 seq_len=0 key_len=0//
> //wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=1
> set_tx=0 seq_len=0 key_len=0//
> //wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=2
> set_tx=0 seq_len=0 key_len=0//
> //wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=3
> set_tx=0 seq_len=0 key_len=0//
> //wlan5: RSN: flushing PMKID list in the driver//
> //nl80211: Flush PMKIDs//
> //wlan5: State: DISCONNECTED -> INACTIVE//
> //WPS: Set UUID for interface wlan5//
> //WPS: UUID based on MAC address - hexdump(len=16): 97 71 b0 a8 da ca 57
> bf 99 80 01 b3 3f 50 26 de//
> //EAPOL: SUPP_PAE entering state DISCONNECTED//
> //EAPOL: Supplicant port status: Unauthorized//
> //nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00//
> //EAPOL: KEY_RX entering state NO_KEY_RECEIVE//
> //EAPOL: SUPP_BE entering state INITIALIZE//
> //EAP: EAP entering state DISABLED//
> //EAPOL: Supplicant port status: Unauthorized//
> //nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00//
> //EAPOL: Supplicant port status: Unauthorized//
> //nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00//
> //P2P: Own listen channel: 1//
> //P2P: Configured operating channel: 115:36//
> //P2P: Add operating class 81//
> //P2P: Channels - hexdump(len=12): 01 02 03 04 05 06 07 08 09 0a 0b 0d//
> //wlan5: Added interface wlan5//
> //wlan5: State: INACTIVE -> DISCONNECTED//
> //wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)//
> //netlink: Operstate: linkmode=-1, operstate=5//
> //random: Got 18/20 bytes from /dev/random//
> //RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])//
> //RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan5' added//
> //nl80211: if_removed already cleared - ignore event//
> //EAPOL: disable timer tick//
> //EAPOL: Supplicant port status: Unauthorized//
> //nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00//
> //random: Got 2/2 bytes from /dev/random//
> //nl80211: Ignore event for foreign ifindex 2/
>
>
> It seems that the 5 GHz channels are added but the 2.4 GHz channels are
> still there and used instead of the frequency 5180.
>
> Kévin
>
> Le 03/07/2013 11:59, Gagan Goyal a écrit :
>> Hi Kevin,
>>
>> plz make sure that driver advertise the support for both the bands and
>> provide all the supported frequencies.
>>
>> During Supplicant init, supplicant read the driver capabilities and
>> along with other things the supported band and frequencies are stored.
>>
>> P2p global data is then initialized with same data.
>>
>> Cheers
>>
>> Gagan
>>
>> On 7/3/13, Kévin THIERRY <kevin.thierry@kaiwen.me> wrote:
>>> Hi,
>>>
>>> Is there a way to force the use of 5GHz frequencies with Wi-Fi Direct ?
>>> (Or define the 5GHz frequencies as preferred ?)
>>>
>>> I tried to add the freq_list option in wpa_supplicant config file
>>> without success. (I think this option should be set in a network block
>>> but there is no network block for Wi-Fi Direct...)
>>> "freq_list=5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560
>>> 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825"
>>>
>>> Thanks,
>>>
>>> Kevin
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe
>>> linux-wireless"
>>> in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>
>
^ permalink raw reply
* Re: [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk
From: Sekhar Nori @ 2013-07-04 4:46 UTC (permalink / raw)
To: Luciano Coelho
Cc: linux-wireless, tony, mturquette, mark.rutland, balbi,
grant.likely, rob.herring, devicetree-discuss, linux-doc,
linux-kernel, linux-omap, linux-arm-kernel, nm
In-Reply-To: <1372860209-3504-3-git-send-email-coelho@ti.com>
On 7/3/2013 7:33 PM, Luciano Coelho wrote:
> The platform_quirk element in the platform data was used to change the
> way the IRQ is triggered. When set, the EDGE_IRQ quirk would change
> the irqflags used and treat edge trigger differently from the rest.
>
> Instead of hiding this irq flag setting behind the quirk, have the
> board files set the flags during initialization. This will be more
> meaningful than driver-specific quirks when we switch to DT.
>
> Additionally, fix missing gpio_request() calls in the boarding files
> (so that setting the flags actually works).
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Sekhar Nori <nsekhar@ti.com>
> Signed-off-by: Luciano Coelho <coelho@ti.com>
> ---
> arch/arm/mach-davinci/board-da850-evm.c | 8 +++++-
For the board-da850-evm.c change,
Acked-by: Sekhar Nori <nsekhar@ti.com>
Thanks,
Sekhar
^ permalink raw reply
* Constant network assoc/disassoc loop with rtl8192cu usb adapter
From: Ilia Mirkin @ 2013-07-04 5:35 UTC (permalink / raw)
To: Larry Finger; +Cc: linux-wireless
Hello,
I recently got a RTL8188CUS usb adapter (which uses the rtl8192cu
driver). I'm having trouble getting it to stay associated:
[601369.845916] wlan0: associated
[601377.106440] rtlwifi:rtl_watchdog_wq_callback():<0-0> AP off, try
to reconnect now
[601383.867706] wlan0: associated
[601391.120270] rtlwifi:rtl_watchdog_wq_callback():<0-0> AP off, try
to reconnect now
[601397.910678] wlan0: associated
[601405.141764] rtlwifi:rtl_watchdog_wq_callback():<0-0> AP off, try
to reconnect now
and so on. A different usb adapter (Ralink RT2573) has no trouble
associating to that AP (but it keeps hanging and the kernel isn't
always able to reset it properly). The network in question is using
WPA2-PSK.
Is there some setting I could adjust so that it would wait longer
before deciding that the AP is off? Or something else I can do?
This is on a 3.10-rc6 kernel + the __queue_work warning fix patch at
https://git.kernel.org/cgit/linux/kernel/git/linville/wireless-testing.git/patch/?id=1621c9466099faf21ad19738d54a7d1845a29b32.
Thanks,
-ilia
^ permalink raw reply
* Re: Use of 5GHz frequencies with Wi-Fi Direct
From: Kévin THIERRY @ 2013-07-04 6:59 UTC (permalink / raw)
To: Gagan Goyal; +Cc: linux-wireless, ronan lanoe
In-Reply-To: <CAChKcEnx12SE+qjYcp0yDpxB=w0gLKw9LM7z1=Dyz0=V91_TLw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 7997 bytes --]
Hi Gagan,
Please find, attached to this mail, the full connection logs.
The peer device is a Samsung Galaxy Note 10.1 with support for 5GHz
channels.
Thanks,
Kevin
Le 04/07/2013 04:59, Gagan Goyal a écrit :
> It seems that peer device is configured to use 2.4 Ghz channel.
> Plz share the complete connection logs to confirm.
>
> //Gagan
>
> On 7/3/13, Kévin THIERRY <kevin.thierry@kaiwen.me> wrote:
>> I'm using an Atheros WB222 Wi-Fi card.
>>
>> $ iw list
>>
>> [...]
>> /Frequencies://
>> //* 5180 MHz [36] (15.0 dBm) (passive scanning, no IBSS)//
>> //* 5200 MHz [40] (15.0 dBm) (passive scanning, no IBSS)//
>> //* 5220 MHz [44] (15.0 dBm) (passive scanning, no IBSS)//
>> //* 5240 MHz [48] (15.0 dBm) (passive scanning, no IBSS)//
>> //* 5260 MHz [52] (17.0 dBm) (passive scanning, no IBSS, radar detection)//
>> //* 5280 MHz [56] (15.0 dBm) (passive scanning, no IBSS, radar detection)//
>> //* 5300 MHz [60] (15.0 dBm) (passive scanning, no IBSS, radar detection)//
>> //* 5320 MHz [64] (15.0 dBm) (passive scanning, no IBSS, radar detection)//
>> //* 5500 MHz [100] (disabled)//
>> //* 5520 MHz [104] (disabled)//
>> //* 5540 MHz [108] (disabled)//
>> //* 5560 MHz [112] (disabled)//
>> //* 5580 MHz [116] (disabled)//
>> //* 5600 MHz [120] (disabled)//
>> //* 5620 MHz [124] (disabled)//
>> //* 5640 MHz [128] (disabled)//
>> //* 5660 MHz [132] (disabled)//
>> //* 5680 MHz [136] (disabled)//
>> //* 5700 MHz [140] (disabled)//
>> //* 5745 MHz [149] (17.0 dBm) (passive scanning, no IBSS)//
>> //* 5765 MHz [153] (17.0 dBm) (passive scanning, no IBSS)//
>> //* 5785 MHz [157] (17.0 dBm) (passive scanning, no IBSS)//
>> //* 5805 MHz [161] (17.0 dBm) (passive scanning, no IBSS)//
>> //* 5825 MHz [165] (17.0 dBm) (passive scanning, no IBSS)/
>> [...]
>>
>>
>> wpa_supplicant config file :
>>
>> /ctrl_interface=/var/run/wpa_supplicant//
>> //ap_scan=1//
>> //device_name=kevin_PC//
>> //device_type=1-0050F204-1//
>> //p2p_oper_reg_class=115//
>> //p2p_oper_channel=36//
>> //country=US/
>>
>>
>> wpa_supplicant debug at start :
>>
>> /ctrl_interface='/var/run/wpa_supplicant'//
>> //ap_scan=1//
>> //device_name='kevin_PC'//
>> //p2p_oper_reg_class=115//
>> //p2p_oper_channel=36//
>> //country='US'//
>> //nl80211: interface wlan5 in phy phy0//
>> //rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0//
>> //rfkill: initial event: idx=1 type=2 op=0 soft=1 hard=0//
>> //nl80211: Set mode ifindex 4 iftype 2 (STATION)//
>> //nl80211: Subscribe to mgmt frames with non-AP handle 0x1e332f0//
>> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
>> //nl80211: Register frame match - hexdump(len=2): 04 0a//
>> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
>> //nl80211: Register frame match - hexdump(len=2): 04 0b//
>> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
>> //nl80211: Register frame match - hexdump(len=2): 04 0c//
>> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
>> //nl80211: Register frame match - hexdump(len=2): 04 0d//
>> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
>> //nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09//
>> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
>> //nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09//
>> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
>> //nl80211: Register frame match - hexdump(len=1): 06//
>> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
>> //nl80211: Register frame match - hexdump(len=2): 0a 07//
>> //nl80211: Register frame type=0xd0 nl_handle=0x1e332f0//
>> //nl80211: Register frame match - hexdump(len=2): 0a 11//
>> //netlink: Operstate: linkmode=1, operstate=5//
>> //nl80211: Using driver-based off-channel TX//
>> //nl80211: TDLS supported//
>> //nl80211: TDLS external setup//
>> //nl80211: Use separate P2P group interface (driver advertised support)//
>> //nl80211: driver param='(null)'//
>> //nl80211: Regulatory information - country=US//
>> //nl80211: 2402-2472 @ 40 MHz//
>> //nl80211: 5170-5250 @ 40 MHz//
>> //nl80211: 5250-5330 @ 40 MHz//
>> //nl80211: 5490-5600 @ 40 MHz//
>> //nl80211: 5650-5710 @ 40 MHz//
>> //nl80211: 5735-5835 @ 40 MHz//
>> //nl80211: Added 802.11b mode based on 802.11g information//
>> //wlan5: Own MAC address: 00:0b:6b:7f:92:56//
>> //wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=0
>> set_tx=0 seq_len=0 key_len=0//
>> //wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=1
>> set_tx=0 seq_len=0 key_len=0//
>> //wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=2
>> set_tx=0 seq_len=0 key_len=0//
>> //wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=3
>> set_tx=0 seq_len=0 key_len=0//
>> //wlan5: RSN: flushing PMKID list in the driver//
>> //nl80211: Flush PMKIDs//
>> //wlan5: State: DISCONNECTED -> INACTIVE//
>> //WPS: Set UUID for interface wlan5//
>> //WPS: UUID based on MAC address - hexdump(len=16): 97 71 b0 a8 da ca 57
>> bf 99 80 01 b3 3f 50 26 de//
>> //EAPOL: SUPP_PAE entering state DISCONNECTED//
>> //EAPOL: Supplicant port status: Unauthorized//
>> //nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00//
>> //EAPOL: KEY_RX entering state NO_KEY_RECEIVE//
>> //EAPOL: SUPP_BE entering state INITIALIZE//
>> //EAP: EAP entering state DISABLED//
>> //EAPOL: Supplicant port status: Unauthorized//
>> //nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00//
>> //EAPOL: Supplicant port status: Unauthorized//
>> //nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00//
>> //P2P: Own listen channel: 1//
>> //P2P: Configured operating channel: 115:36//
>> //P2P: Add operating class 81//
>> //P2P: Channels - hexdump(len=12): 01 02 03 04 05 06 07 08 09 0a 0b 0d//
>> //wlan5: Added interface wlan5//
>> //wlan5: State: INACTIVE -> DISCONNECTED//
>> //wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)//
>> //netlink: Operstate: linkmode=-1, operstate=5//
>> //random: Got 18/20 bytes from /dev/random//
>> //RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])//
>> //RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan5' added//
>> //nl80211: if_removed already cleared - ignore event//
>> //EAPOL: disable timer tick//
>> //EAPOL: Supplicant port status: Unauthorized//
>> //nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00//
>> //random: Got 2/2 bytes from /dev/random//
>> //nl80211: Ignore event for foreign ifindex 2/
>>
>>
>> It seems that the 5 GHz channels are added but the 2.4 GHz channels are
>> still there and used instead of the frequency 5180.
>>
>> Kévin
>>
>> Le 03/07/2013 11:59, Gagan Goyal a écrit :
>>> Hi Kevin,
>>>
>>> plz make sure that driver advertise the support for both the bands and
>>> provide all the supported frequencies.
>>>
>>> During Supplicant init, supplicant read the driver capabilities and
>>> along with other things the supported band and frequencies are stored.
>>>
>>> P2p global data is then initialized with same data.
>>>
>>> Cheers
>>>
>>> Gagan
>>>
>>> On 7/3/13, Kévin THIERRY <kevin.thierry@kaiwen.me> wrote:
>>>> Hi,
>>>>
>>>> Is there a way to force the use of 5GHz frequencies with Wi-Fi Direct ?
>>>> (Or define the 5GHz frequencies as preferred ?)
>>>>
>>>> I tried to add the freq_list option in wpa_supplicant config file
>>>> without success. (I think this option should be set in a network block
>>>> but there is no network block for Wi-Fi Direct...)
>>>> "freq_list=5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560
>>>> 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825"
>>>>
>>>> Thanks,
>>>>
>>>> Kevin
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe
>>>> linux-wireless"
>>>> in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>
[-- Attachment #2: wpa_supplicant_debug --]
[-- Type: text/plain, Size: 163903 bytes --]
wpa_supplicant v2.1-devel
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlan5' conf 'wpa.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file 'wpa.conf' -> '/home/eurogiciel/widi-new/wpa.conf'
Reading configuration file '/home/eurogiciel/widi-new/wpa.conf'
ctrl_interface='/var/run/wpa_supplicant'
ap_scan=1
device_name='kevin_PC'
p2p_oper_reg_class=115
p2p_oper_channel=36
country='US'
nl80211: interface wlan5 in phy phy0
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
rfkill: initial event: idx=1 type=2 op=0 soft=1 hard=0
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x1fa52f0
nl80211: Register frame type=0xd0 nl_handle=0x1fa52f0
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Register frame type=0xd0 nl_handle=0x1fa52f0
nl80211: Register frame match - hexdump(len=2): 04 0b
nl80211: Register frame type=0xd0 nl_handle=0x1fa52f0
nl80211: Register frame match - hexdump(len=2): 04 0c
nl80211: Register frame type=0xd0 nl_handle=0x1fa52f0
nl80211: Register frame match - hexdump(len=2): 04 0d
nl80211: Register frame type=0xd0 nl_handle=0x1fa52f0
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09
nl80211: Register frame type=0xd0 nl_handle=0x1fa52f0
nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09
nl80211: Register frame type=0xd0 nl_handle=0x1fa52f0
nl80211: Register frame match - hexdump(len=1): 06
nl80211: Register frame type=0xd0 nl_handle=0x1fa52f0
nl80211: Register frame match - hexdump(len=2): 0a 07
nl80211: Register frame type=0xd0 nl_handle=0x1fa52f0
nl80211: Register frame match - hexdump(len=2): 0a 11
netlink: Operstate: linkmode=1, operstate=5
nl80211: Using driver-based off-channel TX
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: driver param='(null)'
nl80211: Regulatory information - country=US
nl80211: 2402-2472 @ 40 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5250-5330 @ 40 MHz
nl80211: 5490-5600 @ 40 MHz
nl80211: 5650-5710 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
wlan5: Own MAC address: 00:0b:6b:7f:92:56
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wlan5: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlan5: State: DISCONNECTED -> INACTIVE
WPS: Set UUID for interface wlan5
WPS: UUID based on MAC address - hexdump(len=16): 97 71 b0 a8 da ca 57 bf 99 80 01 b3 3f 50 26 de
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
P2P: Own listen channel: 1
P2P: Configured operating channel: 115:36
P2P: Add operating class 81
P2P: Channels - hexdump(len=12): 01 02 03 04 05 06 07 08 09 0a 0b 0d
wlan5: Added interface wlan5
wlan5: State: INACTIVE -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
random: Got 20/20 bytes from /dev/random
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan5' added
nl80211: if_removed already cleared - ignore event
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
RX ctrl_iface - hexdump_ascii(len=18):
53 45 54 20 77 69 66 69 5f 64 69 73 70 6c 61 79 SET wifi_display
20 30 0
wlan5: Control interface command 'SET wifi_display 0'
CTRL_IFACE SET 'wifi_display'='0'
WFD: Wi-Fi Display disabled
WFD: Update WFD IE
WFD: Wi-Fi Display disabled - do not include WFD IE
RX ctrl_iface - hexdump_ascii(len=35):
57 46 44 5f 53 55 42 45 4c 45 4d 5f 53 45 54 20 WFD_SUBELEM_SET
30 30 20 30 30 30 36 30 30 30 31 30 30 30 30 30 00 0006000100000
30 30 30 000
wlan5: Control interface command 'WFD_SUBELEM_SET 00 0006000100000000'
WFD: Set subelement 0
WFD: Update WFD IE
WFD: Wi-Fi Display disabled - do not include WFD IE
RX ctrl_iface - hexdump_ascii(len=24):
53 45 54 20 64 65 76 69 63 65 5f 6e 61 6d 65 20 SET device_name
6b 65 76 69 6e 2d 70 63 kevin-pc
wlan5: Control interface command 'SET device_name kevin-pc'
CTRL_IFACE SET 'device_name'='kevin-pc'
device_name='kevin-pc'
RX ctrl_iface - hexdump_ascii(len=17):
53 45 54 20 6d 6f 64 65 6c 5f 6e 61 6d 65 20 70 SET model_name p
63 c
wlan5: Control interface command 'SET model_name pc'
CTRL_IFACE SET 'model_name'='pc'
model_name='pc'
RX ctrl_iface - hexdump_ascii(len=30):
53 45 54 20 6d 61 6e 75 66 61 63 74 75 72 65 72 SET manufacturer
20 5b 70 6c 61 63 65 68 6f 6c 64 65 72 5d [placeholder]
wlan5: Control interface command 'SET manufacturer [placeholder]'
CTRL_IFACE SET 'manufacturer'='[placeholder]'
manufacturer='[placeholder]'
RX ctrl_iface - hexdump_ascii(len=24):
53 45 54 20 6d 6f 64 65 6c 5f 6e 75 6d 62 65 72 SET model_number
20 34 2e 30 2e 30 2e 30 4.0.0.0
wlan5: Control interface command 'SET model_number 4.0.0.0'
CTRL_IFACE SET 'model_number'='4.0.0.0'
model_number='4.0.0.0'
RX ctrl_iface - hexdump_ascii(len=31):
53 45 54 20 73 65 72 69 61 6c 5f 6e 75 6d 62 65 SET serial_numbe
72 20 5b 70 6c 61 63 65 68 6f 6c 64 65 72 5d r [placeholder]
wlan5: Control interface command 'SET serial_number [placeholder]'
CTRL_IFACE SET 'serial_number'='[placeholder]'
serial_number='[placeholder]'
RX ctrl_iface - hexdump_ascii(len=18):
53 45 54 20 77 69 66 69 5f 64 69 73 70 6c 61 79 SET wifi_display
20 31 1
wlan5: Control interface command 'SET wifi_display 1'
CTRL_IFACE SET 'wifi_display'='1'
WFD: Wi-Fi Display enabled
WFD: Update WFD IE
WFD: WFD IE for Beacon - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 01 00 00 00 00
WFD: WFD IE for (Re)Association Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 01 00 00 00 00
WFD: WFD IE for GO Negotiation - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 01 00 00 00 00
WFD: WFD IE for Provision Discovery Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 01 00 00 00 00
WFD: WFD IE for Probe Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 01 00 00 00 00
WFD: WFD IE for Probe Response - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 01 00 00 00 00
WFD: WFD IE for P2P Invitation - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 01 00 00 00 00
WFD: WFD IE for Provision Discovery Response - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 01 00 00 00 00
RX ctrl_iface - hexdump_ascii(len=10):
50 32 50 5f 43 41 4e 43 45 4c P2P_CANCEL
wlan5: Control interface command 'P2P_CANCEL'
P2P: Request to cancel group formation
P2P: Stopping find
P2P: Clear timeout (state=IDLE)
P2P: State IDLE -> IDLE
P2P: No ongoing group formation found
RX ctrl_iface - hexdump_ascii(len=22):
50 32 50 5f 47 52 4f 55 50 5f 52 45 4d 4f 56 45 P2P_GROUP_REMOVE
20 77 6c 61 6e 35 wlan5
wlan5: Control interface command 'P2P_GROUP_REMOVE wlan5'
P2P: P2P group interface not found
RX ctrl_iface - hexdump_ascii(len=10):
50 32 50 5f 4c 49 53 54 45 4e P2P_LISTEN
wlan5: Control interface command 'P2P_LISTEN'
P2P: Stopping find
P2P: Clear timeout (state=IDLE)
P2P: State IDLE -> IDLE
P2P: Going to listen(only) state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Enable Probe Request reporting nl_preq=0x1fa68c0
nl80211: Register frame type=0x40 nl_handle=0x1fa68c0
nl80211: Register frame match - hexdump(len=0): [NULL]
nl80211: Remain-on-channel cookie 0xffff8804042eb280 for freq=2412 MHz duration=5000
P2P: State IDLE -> LISTEN_ONLY
RX ctrl_iface - hexdump_ascii(len=19):
53 45 54 20 70 32 70 5f 67 6f 5f 69 6e 74 65 6e SET p2p_go_inten
74 20 30 t 0
wlan5: Control interface command 'SET p2p_go_intent 0'
CTRL_IFACE SET 'p2p_go_intent'='0'
p2p_go_intent=0
RX ctrl_iface - hexdump_ascii(len=26):
53 45 54 20 70 65 72 73 69 73 74 65 6e 74 5f 72 SET persistent_r
65 63 6f 6e 6e 65 63 74 20 31 econnect 1
wlan5: Control interface command 'SET persistent_reconnect 1'
CTRL_IFACE SET 'persistent_reconnect'='1'
persistent_reconnect=1
RX ctrl_iface - hexdump_ascii(len=24):
53 45 54 20 64 65 76 69 63 65 5f 6e 61 6d 65 20 SET device_name
6b 65 76 69 6e 2d 70 63 kevin-pc
wlan5: Control interface command 'SET device_name kevin-pc'
CTRL_IFACE SET 'device_name'='kevin-pc'
device_name='kevin-pc'
RX ctrl_iface - hexdump_ascii(len=17):
53 45 54 20 6d 6f 64 65 6c 5f 6e 61 6d 65 20 70 SET model_name p
63 c
wlan5: Control interface command 'SET model_name pc'
CTRL_IFACE SET 'model_name'='pc'
model_name='pc'
RX ctrl_iface - hexdump_ascii(len=30):
53 45 54 20 6d 61 6e 75 66 61 63 74 75 72 65 72 SET manufacturer
20 5b 70 6c 61 63 65 68 6f 6c 64 65 72 5d [placeholder]
wlan5: Control interface command 'SET manufacturer [placeholder]'
CTRL_IFACE SET 'manufacturer'='[placeholder]'
manufacturer='[placeholder]'
RX ctrl_iface - hexdump_ascii(len=24):
53 45 54 20 6d 6f 64 65 6c 5f 6e 75 6d 62 65 72 SET model_number
20 34 2e 30 2e 30 2e 30 4.0.0.0
wlan5: Control interface command 'SET model_number 4.0.0.0'
CTRL_IFACE SET 'model_number'='4.0.0.0'
model_number='4.0.0.0'
RX ctrl_iface - hexdump_ascii(len=31):
53 45 54 20 73 65 72 69 61 6c 5f 6e 75 6d 62 65 SET serial_numbe
72 20 5b 70 6c 61 63 65 68 6f 6c 64 65 72 5d r [placeholder]
wlan5: Control interface command 'SET serial_number [placeholder]'
CTRL_IFACE SET 'serial_number'='[placeholder]'
serial_number='[placeholder]'
RX ctrl_iface - hexdump_ascii(len=35):
57 46 44 5f 53 55 42 45 4c 45 4d 5f 53 45 54 20 WFD_SUBELEM_SET
30 30 20 30 30 30 36 30 30 31 31 30 30 30 30 30 00 0006001100000
30 30 30 000
wlan5: Control interface command 'WFD_SUBELEM_SET 00 0006001100000000'
WFD: Set subelement 0
WFD: Update WFD IE
WFD: WFD IE for Beacon - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for (Re)Association Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for GO Negotiation - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Provision Discovery Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Probe Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Probe Response - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for P2P Invitation - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Provision Discovery Response - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
CTRL_IFACE monitor attached - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=5000 cookie=0xffff8804042eb280 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(5,0) on freq=2412 based on callback
P2P: Set timeout (state=LISTEN_ONLY): 5.020000 sec
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=e0:2a:82:46:13:6e
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff e0 2a 82 46 13 6e ff ff ff ff ff ff 30 00 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 3c 18 1f ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 09 00 10 18 02 00 11 01 00 00 dd 1e 00 90 4c 33 3c 18 1f ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=e0:2a:82:46:13:6e
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff e0 2a 82 46 13 6e ff ff ff ff ff ff 40 00 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 3c 18 1f ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 09 00 10 18 02 00 11 01 00 00 dd 1e 00 90 4c 33 3c 18 1f ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=306): 40 00 00 00 ff ff ff ff ff ff 62 21 c0 99 88 b1 ff ff ff ff ff ff 20 1c 00 07 44 49 52 45 43 54 2d 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 99 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9 10 54 00 08 00 0a 00 50 f2 04 00 05 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 13 53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e 49 43 53 10 23 00 0e 53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 10 24 00 04 32 30 31 32 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 11 50 6f 9a 09 02 02 00 27 00 06 05 00 58 58 04 51 01 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Created device entry based on Probe Req: 62:21:c0:99:88:b1 dev_capab=0x25 group_capab=0x0 name='Android_a7ca' listen_freq=2412
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Reply to P2P Probe Request in Listen state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: CMD_FRAME freq=2412 wait=0 no_cck=1 no_ack=1 offchanok=1
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=e0:2a:82:46:13:6e
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff e0 2a 82 46 13 6e ff ff ff ff ff ff 50 00 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 3c 18 1f ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 02 dd 09 00 10 18 02 00 11 01 00 00 dd 1e 00 90 4c 33 3c 18 1f ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=306): 40 00 00 00 ff ff ff ff ff ff 62 21 c0 99 88 b1 ff ff ff ff ff ff 50 1c 00 07 44 49 52 45 43 54 2d 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 99 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9 10 54 00 08 00 0a 00 50 f2 04 00 05 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 13 53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e 49 43 53 10 23 00 0e 53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 10 24 00 04 32 30 31 32 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 11 50 6f 9a 09 02 02 00 27 00 06 05 00 58 58 04 51 01 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Reply to P2P Probe Request in Listen state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: CMD_FRAME freq=2412 wait=0 no_cck=1 no_ack=1 offchanok=1
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=18:f4:6a:88:56:a2
nl80211: MLME event frame - hexdump(len=45): 40 00 00 00 ff ff ff ff ff ff 18 f4 6a 88 56 a2 ff ff ff ff ff ff b0 16 00 00 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c 7f 01 01
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=18:f4:6a:88:56:a2
nl80211: MLME event frame - hexdump(len=45): 40 00 00 00 ff ff ff ff ff ff 18 f4 6a 88 56 a2 ff ff ff ff ff ff c0 16 00 00 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c 7f 01 01
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=306): 40 00 00 00 ff ff ff ff ff ff 62 21 c0 99 88 b1 ff ff ff ff ff ff 80 1c 00 07 44 49 52 45 43 54 2d 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 99 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9 10 54 00 08 00 0a 00 50 f2 04 00 05 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 13 53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e 49 43 53 10 23 00 0e 53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 10 24 00 04 32 30 31 32 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 11 50 6f 9a 09 02 02 00 27 00 06 05 00 58 58 04 51 01 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Reply to P2P Probe Request in Listen state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: CMD_FRAME freq=2412 wait=0 no_cck=1 no_ack=1 offchanok=1
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=18:f4:6a:88:56:a2
nl80211: MLME event frame - hexdump(len=45): 40 00 00 00 ff ff ff ff ff ff 18 f4 6a 88 56 a2 ff ff ff ff ff ff 50 17 00 00 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c 7f 01 01
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=306): 40 00 00 00 ff ff ff ff ff ff 62 21 c0 99 88 b1 ff ff ff ff ff ff b0 1c 00 07 44 49 52 45 43 54 2d 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 99 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9 10 54 00 08 00 0a 00 50 f2 04 00 05 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 13 53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e 49 43 53 10 23 00 0e 53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 10 24 00 04 32 30 31 32 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 11 50 6f 9a 09 02 02 00 27 00 06 05 00 58 58 04 51 01 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Reply to P2P Probe Request in Listen state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: CMD_FRAME freq=2412 wait=0 no_cck=1 no_ack=1 offchanok=1
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=306): 40 00 00 00 ff ff ff ff ff ff 62 21 c0 99 88 b1 ff ff ff ff ff ff e0 1c 00 07 44 49 52 45 43 54 2d 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 99 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9 10 54 00 08 00 0a 00 50 f2 04 00 05 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 13 53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e 49 43 53 10 23 00 0e 53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 10 24 00 04 32 30 31 32 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 11 50 6f 9a 09 02 02 00 27 00 06 05 00 58 58 04 51 01 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Reply to P2P Probe Request in Listen state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: CMD_FRAME freq=2412 wait=0 no_cck=1 no_ack=1 offchanok=1
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=306): 40 00 00 00 ff ff ff ff ff ff 62 21 c0 99 88 b1 ff ff ff ff ff ff 10 1d 00 07 44 49 52 45 43 54 2d 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 99 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9 10 54 00 08 00 0a 00 50 f2 04 00 05 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 13 53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e 49 43 53 10 23 00 0e 53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 10 24 00 04 32 30 31 32 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 11 50 6f 9a 09 02 02 00 27 00 06 05 00 58 58 04 51 01 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Reply to P2P Probe Request in Listen state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: CMD_FRAME freq=2412 wait=0 no_cck=1 no_ack=1 offchanok=1
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 40 1d 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 50 1d 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 60 1d 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 02 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 70 1d 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 02 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff c0 1d 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 05 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff e0 1e 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff f0 1e 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 00 1f 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 02 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 10 1f 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 02 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 60 1f 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 05 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=2c:d0:5a:06:a5:92
nl80211: MLME event frame - hexdump(len=73): 40 00 00 00 ff ff ff ff ff ff 2c d0 5a 06 a5 92 ff ff ff ff ff ff c0 ae 00 00 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 03 01 01 2d 1a 6e 11 1b ff 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=2c:d0:5a:06:a5:92
nl80211: MLME event frame - hexdump(len=73): 40 00 00 00 ff ff ff ff ff ff 2c d0 5a 06 a5 92 ff ff ff ff ff ff d0 ae 00 00 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 03 01 02 2d 1a 6e 11 1b ff 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=306): 40 00 00 00 ff ff ff ff ff ff 62 21 c0 99 88 b1 ff ff ff ff ff ff 60 20 00 07 44 49 52 45 43 54 2d 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 99 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9 10 54 00 08 00 0a 00 50 f2 04 00 05 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 13 53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e 49 43 53 10 23 00 0e 53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 10 24 00 04 32 30 31 32 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 11 50 6f 9a 09 02 02 00 27 00 06 05 00 58 58 04 51 01 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Reply to P2P Probe Request in Listen state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: CMD_FRAME freq=2412 wait=0 no_cck=1 no_ack=1 offchanok=1
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=00:0b:6b:7f:92:56 A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=119): d0 00 3c 00 00 0b 6b 7f 92 56 62 21 c0 99 88 b1 00 0b 6b 7f 92 56 70 20 04 09 50 6f 9a 09 07 01 dd 2d 50 6f 9a 09 02 02 00 27 00 0d 21 00 62 21 c0 99 88 b1 01 88 00 0a 00 50 f2 04 00 05 00 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 dd 0a 00 50 f2 04 10 08 00 02 00 08 dd 0b 00 00 f0 0a 00 00 04 0a 31 a8 c0 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28
nl80211: Frame event
wlan5: Event RX_ACTION (21) received
wlan5: Received Action frame: SA=62:21:c0:99:88:b1 Category=4 DataLen=94 freq=2412 MHz
P2P: RX P2P Public Action from 62:21:c0:99:88:b1
P2P: P2P Public Action contents - hexdump(len=89): 07 01 dd 2d 50 6f 9a 09 02 02 00 27 00 0d 21 00 62 21 c0 99 88 b1 01 88 00 0a 00 50 f2 04 00 05 00 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 dd 0a 00 50 f2 04 10 08 00 02 00 08 dd 0b 00 00 f0 0a 00 00 04 0a 31 a8 c0 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28
P2P: Parsing the received message
P2P: * Dialog Token: 1
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x8
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x188
P2P: Received Provision Discovery Request from 62:21:c0:99:88:b1 with config methods 0x8 (freq=2412)
P2P: Provision Discovery Request from unknown peer 62:21:c0:99:88:b1
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x8
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x188
P2P: Update peer 62:21:c0:99:88:b1 config_methods 0x0 -> 0x188
P2P: Peer found with Listen frequency 2412 MHz (rx_time=1372920467.984941)
P2P-DEVICE-FOUND 62:21:c0:99:88:b1 p2p_dev_addr=62:21:c0:99:88:b1 pri_dev_type=10-0050F204-5 name='Android_a7ca' config_methods=0x188 dev_capab=0x25 group_capab=0x0
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
P2P: Peer 62:21:c0:99:88:b1 requested us to show a PIN on display
P2P: * Dialog Token: 1
P2P: Sending Provision Discovery Response
Off-channel: Send action frame: freq=2412 dst=62:21:c0:99:88:b1 src=00:0b:6b:7f:92:56 bssid=00:0b:6b:7f:92:56 len=35
nl80211: Send Action frame (ifindex=4, freq=2412 MHz wait=200 ms no_cck=1)
nl80211: CMD_FRAME freq=2412 wait=200 no_cck=1 no_ack=0 offchanok=1
nl80211: Frame TX command accepted; cookie 0xffff8804077e0800
Get randomness: len=4 entropy=0
P2P-PROV-DISC-SHOW-PIN 62:21:c0:99:88:b1 13073176 p2p_dev_addr=62:21:c0:99:88:b1 pri_dev_type=10-0050F204-5 name='Android_a7ca' config_methods=0x188 dev_capab=0x27 group_capab=0x0
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
nl80211: Event message available
nl80211: MLME event 60 on wlan5(00:0b:6b:7f:92:56) A1=62:21:c0:99:88:b1 A2=00:0b:6b:7f:92:56
nl80211: MLME event frame - hexdump(len=59): d0 00 ac 00 62 21 c0 99 88 b1 00 0b 6b 7f 92 56 00 0b 6b 7f 92 56 e0 1b 04 09 50 6f 9a 09 08 01 dd 0a 00 50 f2 04 10 08 00 02 00 08 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
nl80211: Frame TX status event
nl80211: Action TX status: cookie=0ffff8804077e0800 (match) (ack=1)
wlan5: Event TX_STATUS (18) received
wlan5: EVENT_TX_STATUS dst=62:21:c0:99:88:b1 type=0 stype=13
Off-channel: TX status result=0 cb=0x423fe0
P2P: Action frame TX callback (state=0 freq=2412 dst=62:21:c0:99:88:b1 src=00:0b:6b:7f:92:56 bssid=00:0b:6b:7f:92:56 result=0
RX ctrl_iface - hexdump_ascii(len=46):
50 32 50 5f 43 4f 4e 4e 45 43 54 20 36 32 3a 32 P2P_CONNECT 62:2
31 3a 63 30 3a 39 39 3a 38 38 3a 62 31 20 31 33 1:c0:99:88:b1 13
30 37 33 31 37 36 20 64 69 73 70 6c 61 79 073176 display
wlan5: Control interface command 'P2P_CONNECT 62:21:c0:99:88:b1 13073176 display'
nl80211: Get shared freq for PHY phy0
nl80211: No shared interface for PHY (phy0) in associated state
P2P: Own frequency preference: 0 MHz
P2P: Create a new interface p2p-wlan5-0 for the group
nl80211: Create interface iftype 8 (P2P_CLIENT)
nl80211: New interface p2p-wlan5-0 created: ifindex=6
nl80211: Set TX rates failed: ret=-100 (Network is down)
nl80211: Allocate new address for P2P group interface
nl80211: Assigned new P2P Interface Address 02:0b:6b:7f:92:56
P2P: Created pending virtual interface p2p-wlan5-0 addr 02:0b:6b:7f:92:56
P2P: Request to start group negotiation - peer=62:21:c0:99:88:b1 GO Intent=0 Intended Interface Address=02:0b:6b:7f:92:56 wps_method=1 persistent_group=0 pd_before_go_neg=0
P2P: Own preference for operation channel: Operating Class 115 Channel 36
P2P: Stopping find
P2P: Clear timeout (state=LISTEN_ONLY)
P2P: State LISTEN_ONLY -> IDLE
P2P: Clear timeout (state=IDLE)
P2P: Clear drv_in_listen (2412)
nl80211: Cancel remain-on-channel with cookie 0xffff8804042eb280
nl80211: Disable Probe Request reporting nl_preq=0x1fa68c0
P2P: * Dialog Token: 1
P2P: * P2P IE header
P2P: * Capability dev=25 group=08
P2P: * GO Intent: Intent 0 Tie breaker 1
P2P: * Configuration Timeout: GO 100 (*10ms) client 20 (*10ms)
P2P: * Listen Channel: Regulatory Class 81 Channel 1
P2P: * Intended P2P Interface Address 02:0b:6b:7f:92:56
P2P: * Channel List - hexdump(len=17): 55 53 04 51 0c 01 02 03 04 05 06 07 08 09 0a 0b 0d
P2P: * Device Info
P2P: * Operating Channel: Regulatory Class 115 Channel 36
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * Version2 (0x20)
P2P: Sending GO Negotiation Request
P2P: State IDLE -> CONNECT
Off-channel: Send action frame: freq=2412 dst=62:21:c0:99:88:b1 src=00:0b:6b:7f:92:56 bssid=62:21:c0:99:88:b1 len=147
nl80211: Send Action frame (ifindex=4, freq=2412 MHz wait=500 ms no_cck=1)
nl80211: CMD_FRAME freq=2412 wait=500 no_cck=1 no_ack=0 offchanok=1
nl80211: Frame TX command accepted; cookie 0xffff8803d954ad00
nl80211: Ignore event for foreign ifindex 6
nl80211: Ignore event for foreign ifindex 6
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff8804042eb280 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=0x1fa8bb0)
P2P: Driver ended Listen state (freq=2412)
nl80211: Event message available
nl80211: MLME event 60 on wlan5(00:0b:6b:7f:92:56) A1=62:21:c0:99:88:b1 A2=00:0b:6b:7f:92:56
nl80211: MLME event frame - hexdump(len=171): d0 00 ac 00 62 21 c0 99 88 b1 00 0b 6b 7f 92 56 62 21 c0 99 88 b1 f0 1b 04 09 50 6f 9a 09 00 01 dd 5f 50 6f 9a 09 02 02 00 25 08 04 01 00 01 05 02 00 64 14 06 05 00 55 53 04 51 01 09 06 00 02 0b 6b 7f 92 56 0b 11 00 55 53 04 51 0c 01 02 03 04 05 06 07 08 09 0a 0b 0d 0d 1d 00 00 0b 6b 7f 92 56 01 08 00 01 00 50 f2 04 00 01 00 10 11 00 08 6b 65 76 69 6e 2d 70 63 11 05 00 55 53 04 73 24 dd 19 00 50 f2 04 10 4a 00 01 10 10 12 00 02 00 05 10 49 00 06 00 37 2a 00 01 20 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
nl80211: Frame TX status event
nl80211: Action TX status: cookie=0ffff8803d954ad00 (match) (ack=1)
wlan5: Event TX_STATUS (18) received
wlan5: EVENT_TX_STATUS dst=62:21:c0:99:88:b1 type=0 stype=13
Off-channel: TX status result=0 cb=0x423fe0
P2P: Action frame TX callback (state=1 freq=2412 dst=62:21:c0:99:88:b1 src=00:0b:6b:7f:92:56 bssid=62:21:c0:99:88:b1 result=0
P2P: GO Negotiation Request TX callback: success=1
P2P: State CONNECT -> CONNECT
P2P: Set timeout (state=CONNECT): 0.500000 sec
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=00:0b:6b:7f:92:56 A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=178): d0 00 3c 00 00 0b 6b 7f 92 56 62 21 c0 99 88 b1 62 21 c0 99 88 b1 80 20 04 09 50 6f 9a 09 01 01 dd 66 50 6f 9a 09 00 01 00 01 02 02 00 27 00 04 01 00 0e 05 02 00 64 14 11 05 00 58 58 04 73 30 09 06 00 62 21 c0 99 08 b1 0b 18 00 58 58 04 51 0d 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 73 04 24 28 2c 30 0d 21 00 62 21 c0 99 88 b1 01 88 00 0a 00 50 f2 04 00 05 00 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 dd 19 00 50 f2 04 10 4a 00 01 10 10 12 00 02 00 00 10 49 00 06 00 37 2a 00 01 20 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28
nl80211: Frame event
wlan5: Event RX_ACTION (21) received
wlan5: Received Action frame: SA=62:21:c0:99:88:b1 Category=4 DataLen=153 freq=2412 MHz
P2P: RX P2P Public Action from 62:21:c0:99:88:b1
P2P: P2P Public Action contents - hexdump(len=148): 01 01 dd 66 50 6f 9a 09 00 01 00 01 02 02 00 27 00 04 01 00 0e 05 02 00 64 14 11 05 00 58 58 04 73 30 09 06 00 62 21 c0 99 08 b1 0b 18 00 58 58 04 51 0d 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 73 04 24 28 2c 30 0d 21 00 62 21 c0 99 88 b1 01 88 00 0a 00 50 f2 04 00 05 00 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 dd 19 00 50 f2 04 10 4a 00 01 10 10 12 00 02 00 00 10 49 00 06 00 37 2a 00 01 20 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28
P2P: Received GO Negotiation Response from 62:21:c0:99:88:b1 (freq=2412)
P2P: Parsing the received message
P2P: * Dialog Token: 1
P2P: Parsing WPS IE
P2P: Device Password ID: 0
P2P: Parsing P2P IE
P2P: Attribute 0 length 1
P2P: * Status: 1
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 4 length 1
P2P: * GO Intent: Intent 7 Tie breaker 0
P2P: Attribute 5 length 2
P2P: * Configuration Timeout
P2P: Attribute 17 length 5
P2P: * Operating Channel: Country XX(0x04) Regulatory Class 115 Channel Number 48
P2P: Attribute 9 length 6
P2P: * Intended P2P Interface Address: 62:21:c0:99:08:b1
P2P: Attribute 11 length 24
P2P: * Channel List: Country String 'XX(0x04)'
P2P: Channel List - hexdump(len=24): 58 58 04 51 0d 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 73 04 24 28 2c 30
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x188
P2P: GO Negotiation rejected: status 1
P2P: Wait for the peer to become ready for GO Negotiation
P2P: State CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.000000 sec
Off-channel: Action frame sequence done notification
nl80211: Cancel TX frame wait: cookie=0xffff8803d954ad00
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Enable Probe Request reporting nl_preq=0x1fa68c0
nl80211: Register frame type=0x40 nl_handle=0x1fa68c0
nl80211: Register frame match - hexdump(len=0): [NULL]
nl80211: Remain-on-channel cookie 0xffff880405e77f80 for freq=2412 MHz duration=307
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=307 cookie=0xffff880405e77f80 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,307200) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.327200 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff880405e77f80 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff880405e77e80 for freq=2412 MHz duration=307
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=307 cookie=0xffff880405e77e80 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,307200) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.327200 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff880405e77e80 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff88034c994780 for freq=2412 MHz duration=307
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=307 cookie=0xffff88034c994780 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,307200) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.327200 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff88034c994780 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff88040831b500 for freq=2412 MHz duration=204
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=204 cookie=0xffff88040831b500 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,204800) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.224800 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff88040831b500 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff88034c8f2f00 for freq=2412 MHz duration=204
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=204 cookie=0xffff88034c8f2f00 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,204800) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.224800 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff88034c8f2f00 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff88034c994c00 for freq=2412 MHz duration=307
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=307 cookie=0xffff88034c994c00 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,307200) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.327200 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff88034c994c00 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff88034c8f2a80 for freq=2412 MHz duration=204
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=204 cookie=0xffff88034c8f2a80 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,204800) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.224800 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff88034c8f2a80 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff88034c994c00 for freq=2412 MHz duration=102
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=102 cookie=0xffff88034c994c00 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,102400) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.122400 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff88034c994c00 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff88034c8f2900 for freq=2412 MHz duration=204
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=204 cookie=0xffff88034c8f2900 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,204800) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.224800 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff88034c8f2900 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff88034c994d80 for freq=2412 MHz duration=307
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=307 cookie=0xffff88034c994d80 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,307200) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.327200 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff88034c994d80 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> WAIT_PEER_IDLE
P2P: Set timeout (state=WAIT_PEER_IDLE): 0.500000 sec
P2P: Timeout (state=WAIT_PEER_IDLE)
P2P: Go to Listen state while waiting for the peer to become ready for GO Negotiation
P2P: State WAIT_PEER_IDLE -> WAIT_PEER_CONNECT
P2P: Starting short listen state (state=WAIT_PEER_CONNECT)
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa68c0
nl80211: Remain-on-channel cookie 0xffff88034c994400 for freq=2412 MHz duration=102
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=102 cookie=0xffff88034c994400 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(0,102400) on freq=2412 based on callback
P2P: Set timeout (state=WAIT_PEER_CONNECT): 0.122400 sec
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=306): 40 00 00 00 ff ff ff ff ff ff 62 21 c0 99 88 b1 ff ff ff ff ff ff 40 00 00 07 44 49 52 45 43 54 2d 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 99 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9 10 54 00 08 00 0a 00 50 f2 04 00 05 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 13 53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e 49 43 53 10 23 00 0e 53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 10 24 00 04 32 30 31 32 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 11 50 6f 9a 09 02 02 00 27 00 06 05 00 58 58 04 51 01 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Parsing WPS IE
P2P: Config Methods (WPS): 0x2108
P2P: Device Password ID: 0
P2P: Primary Device Type (WPS): 10-0050F204-5
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Reply to P2P Probe Request in Listen state
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: CMD_FRAME freq=2412 wait=0 no_cck=1 no_ack=1 offchanok=1
nl80211: Frame TX command accepted (no ACK); cookie 0x0
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=00:0b:6b:7f:92:56 A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=182): d0 00 3c 00 00 0b 6b 7f 92 56 62 21 c0 99 88 b1 00 0b 6b 7f 92 56 50 00 04 09 50 6f 9a 09 00 02 dd 6a 50 6f 9a 09 02 02 00 27 08 04 01 00 0f 05 02 00 64 14 06 05 00 58 58 04 51 01 09 06 00 62 21 c0 99 08 b1 0b 18 00 58 58 04 51 0d 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 73 04 24 28 2c 30 0d 21 00 62 21 c0 99 88 b1 01 08 00 0a 00 50 f2 04 00 05 00 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 11 05 00 58 58 04 73 30 dd 19 00 50 f2 04 10 4a 00 01 10 10 12 00 02 00 01 10 49 00 06 00 37 2a 00 01 20 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28
nl80211: Frame event
wlan5: Event RX_ACTION (21) received
wlan5: Received Action frame: SA=62:21:c0:99:88:b1 Category=4 DataLen=157 freq=2412 MHz
P2P: RX P2P Public Action from 62:21:c0:99:88:b1
P2P: P2P Public Action contents - hexdump(len=152): 00 02 dd 6a 50 6f 9a 09 02 02 00 27 08 04 01 00 0f 05 02 00 64 14 06 05 00 58 58 04 51 01 09 06 00 62 21 c0 99 08 b1 0b 18 00 58 58 04 51 0d 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 73 04 24 28 2c 30 0d 21 00 62 21 c0 99 88 b1 01 08 00 0a 00 50 f2 04 00 05 00 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 11 05 00 58 58 04 73 30 dd 19 00 50 f2 04 10 4a 00 01 10 10 12 00 02 00 01 10 49 00 06 00 37 2a 00 01 20 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28
P2P: Received GO Negotiation Request from 62:21:c0:99:88:b1(freq=2412)
P2P: Parsing the received message
P2P: * Dialog Token: 2
P2P: Parsing WPS IE
P2P: Device Password ID: 1
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 08
P2P: Attribute 4 length 1
P2P: * GO Intent: Intent 7 Tie breaker 1
P2P: Attribute 5 length 2
P2P: * Configuration Timeout
P2P: Attribute 6 length 5
P2P: * Listen Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Attribute 9 length 6
P2P: * Intended P2P Interface Address: 62:21:c0:99:08:b1
P2P: Attribute 11 length 24
P2P: * Channel List: Country String 'XX(0x04)'
P2P: Channel List - hexdump(len=24): 58 58 04 51 0d 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 73 04 24 28 2c 30
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x108
P2P: Attribute 17 length 5
P2P: * Operating Channel: Country XX(0x04) Regulatory Class 115 Channel Number 48
P2P: Peer country - hexdump_ascii(len=3):
58 58 04 XX_
P2P: Own reg_classes 1 peer reg_classes 2 intersection reg_classes 1
P2P: Peer entered PIN on Keypad
P2P: Peer operating channel preference: 5240 MHz
P2P: GO Negotiation with 62:21:c0:99:88:b1
P2P: Stopping find
P2P: Clear timeout (state=WAIT_PEER_CONNECT)
P2P: State WAIT_PEER_CONNECT -> IDLE
P2P: Skip stop_listen since we are on correct channel for response
P2P: State IDLE -> GO_NEG
P2P: Clear timeout (state=GO_NEG)
P2P: Building GO Negotiation Response
P2P: * Dialog Token: 2
P2P: * P2P IE header
P2P: * Status: 0
P2P: * Capability dev=25 group=00
P2P: * GO Intent: Intent 0 Tie breaker 0
P2P: * Configuration Timeout: GO 100 (*10ms) client 20 (*10ms)
P2P: Omit Operating Channel attribute
P2P: * Intended P2P Interface Address 02:0b:6b:7f:92:56
P2P: * Channel List - hexdump(len=17): 55 53 04 51 0c 01 02 03 04 05 06 07 08 09 0a 0b 0d
P2P: * Device Info
WPS: * Version (hardcoded 0x10)
P2P: WPS IE Device Password ID: 5
WPS: * Version2 (0x20)
P2P: Sending GO Negotiation Response
Off-channel: Send action frame: freq=2412 dst=62:21:c0:99:88:b1 src=00:0b:6b:7f:92:56 bssid=00:0b:6b:7f:92:56 len=135
nl80211: Send Action frame (ifindex=4, freq=2412 MHz wait=500 ms no_cck=1)
nl80211: CMD_FRAME freq=2412 wait=500 no_cck=1 no_ack=0 offchanok=1
nl80211: Frame TX command accepted; cookie 0xffff880399356e00
nl80211: Event message available
nl80211: MLME event 60 on wlan5(00:0b:6b:7f:92:56) A1=62:21:c0:99:88:b1 A2=00:0b:6b:7f:92:56
nl80211: MLME event frame - hexdump(len=159): d0 00 ac 00 62 21 c0 99 88 b1 00 0b 6b 7f 92 56 00 0b 6b 7f 92 56 10 1c 04 09 50 6f 9a 09 01 02 dd 53 50 6f 9a 09 00 01 00 00 02 02 00 25 00 04 01 00 00 05 02 00 64 14 09 06 00 02 0b 6b 7f 92 56 0b 11 00 55 53 04 51 0c 01 02 03 04 05 06 07 08 09 0a 0b 0d 0d 1d 00 00 0b 6b 7f 92 56 01 08 00 01 00 50 f2 04 00 01 00 10 11 00 08 6b 65 76 69 6e 2d 70 63 dd 19 00 50 f2 04 10 4a 00 01 10 10 12 00 02 00 05 10 49 00 06 00 37 2a 00 01 20 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
nl80211: Frame TX status event
nl80211: Action TX status: cookie=0ffff880399356e00 (match) (ack=1)
wlan5: Event TX_STATUS (18) received
wlan5: EVENT_TX_STATUS dst=62:21:c0:99:88:b1 type=0 stype=13
Off-channel: TX status result=0 cb=0x423fe0
P2P: Action frame TX callback (state=2 freq=2412 dst=62:21:c0:99:88:b1 src=00:0b:6b:7f:92:56 bssid=00:0b:6b:7f:92:56 result=0
P2P: GO Negotiation Response TX callback: success=1
P2P: State GO_NEG -> CONNECT
P2P: Set timeout (state=CONNECT): 0.500000 sec
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=00:0b:6b:7f:92:56 A2=62:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=121): d0 00 3c 00 00 0b 6b 7f 92 56 62 21 c0 99 88 b1 00 0b 6b 7f 92 56 60 00 04 09 50 6f 9a 09 02 02 dd 48 50 6f 9a 09 00 01 00 00 02 02 00 27 00 11 05 00 58 58 04 51 01 0b 11 00 58 58 04 51 0c 01 02 03 04 05 06 07 08 09 0a 0b 0d 0f 1c 00 62 21 c0 99 88 b1 44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 64 5f 61 37 63 61 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28
nl80211: Frame event
wlan5: Event RX_ACTION (21) received
wlan5: Received Action frame: SA=62:21:c0:99:88:b1 Category=4 DataLen=96 freq=2412 MHz
P2P: RX P2P Public Action from 62:21:c0:99:88:b1
P2P: P2P Public Action contents - hexdump(len=91): 02 02 dd 48 50 6f 9a 09 00 01 00 00 02 02 00 27 00 11 05 00 58 58 04 51 01 0b 11 00 58 58 04 51 0c 01 02 03 04 05 06 07 08 09 0a 0b 0d 0f 1c 00 62 21 c0 99 88 b1 44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 64 5f 61 37 63 61 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28
P2P: Received GO Negotiation Confirm from 62:21:c0:99:88:b1
P2P: Parsing the received message
P2P: * Dialog Token: 2
P2P: Parsing P2P IE
P2P: Attribute 0 length 1
P2P: * Status: 0
P2P: Attribute 2 length 2
P2P: * Device Capability 27 Group Capability 00
P2P: Attribute 17 length 5
P2P: * Operating Channel: Country XX(0x04) Regulatory Class 81 Channel Number 1
P2P: Attribute 11 length 17
P2P: * Channel List: Country String 'XX(0x04)'
P2P: Channel List - hexdump(len=17): 58 58 04 51 0c 01 02 03 04 05 06 07 08 09 0a 0b 0d
P2P: Attribute 15 length 28
P2P: * P2P Group ID: Device Address 62:21:c0:99:88:b1
P2P: * P2P Group ID: SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
P2P: 20 ms wait on current channel before starting group
P2P: GO Negotiation with 62:21:c0:99:88:b1 completed (peer will be GO)
P2P: Clear timeout (state=CONNECT)
P2P: State CONNECT -> PROVISIONING
nl80211: Cancel remain-on-channel with cookie 0xffff88034c994400
P2P-GO-NEG-SUCCESS
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
Initializing interface 'p2p-wlan5-0' conf 'N/A' driver 'nl80211' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A'
nl80211: interface p2p-wlan5-0 in phy phy0
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
rfkill: initial event: idx=1 type=2 op=0 soft=1 hard=0
netlink: Operstate: linkmode=1, operstate=5
nl80211: Using driver-based off-channel TX
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: driver param='(null)'
nl80211: Regulatory information - country=US
nl80211: 2402-2472 @ 40 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5250-5330 @ 40 MHz
nl80211: 5490-5600 @ 40 MHz
nl80211: 5650-5710 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
p2p-wlan5-0: Own MAC address: 02:0b:6b:7f:92:56
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
p2p-wlan5-0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
p2p-wlan5-0: State: DISCONNECTED -> INACTIVE
WPS: Set UUID for interface p2p-wlan5-0
WPS: UUID from the first interface - hexdump(len=16): 97 71 b0 a8 da ca 57 bf 99 80 01 b3 3f 50 26 de
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
Using existing control interface directory.
p2p-wlan5-0: Added interface p2p-wlan5-0
p2p-wlan5-0: State: INACTIVE -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
P2P: Start WPS Enrollee for peer 62:21:c0:99:08:b1
P2P: Start WPS Enrollee for SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
key_mgmt: 0x200
eap methods - hexdump(len=16): 2a 37 00 00 01 00 00 00 00 00 00 00 00 00 00 00
identity - hexdump_ascii(len=29):
57 46 41 2d 53 69 6d 70 6c 65 43 6f 6e 66 69 67 WFA-SimpleConfig
2d 45 6e 72 6f 6c 6c 65 65 2d 31 2d 30 -Enrollee-1-0
WPS: Use specific AP SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
phase1 - hexdump_ascii(len=24):
70 69 6e 3d 31 33 30 37 33 31 37 36 20 64 65 76 pin=13073176 dev
5f 70 77 5f 69 64 3d 30 _pw_id=0
p2p-wlan5-0: Setting scan request: 0 sec 0 usec
p2p-wlan5-0: State: DISCONNECTED -> SCANNING
P2P: Use specific SSID for scan during P2P group formation
p2p-wlan5-0: P2P: Scan only GO preferred frequency 5240 MHz
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (2108)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (3)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (0)
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Device Name
WPS: * Version2 (0x20)
WPS: * Request to Enroll (1)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 1
p2p-wlan5-0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
nl80211: Scan extra IEs - hexdump(len=144): dd 6c 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 97 71 b0 a8 da ca 57 bf 99 80 01 b3 3f 50 26 de 10 54 00 08 00 00 00 00 00 00 00 00 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 01 20 10 23 00 01 20 10 24 00 01 20 10 11 00 01 20 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00 dd 11 50 6f 9a 09 02 02 00 25 00 06 05 00 55 53 04 51 01
nl80211: Scan frequency 5240 MHz
nl80211: P2P probe - mask SuppRates
Scan requested (ret=0) - scan timeout 10 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff88034c994400 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=0 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
nl80211: Event message available
p2p-wlan5-0: nl80211: Scan trigger
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
p2p-wlan5-0: nl80211: New scan results available
p2p-wlan5-0: Event SCAN_RESULTS (3) received
nl80211: Received scan results (0 BSSes)
p2p-wlan5-0: WPS: Order scan results with WPS provisioning rules
p2p-wlan5-0: BSS: Start scan result update 1
BSS: last_scan_res_used=0/0 last_scan_full=0
p2p-wlan5-0: New scan results available
p2p-wlan5-0: No suitable network found
p2p-wlan5-0: Setting scan request: 0 sec 250000 usec
p2p-wlan5-0: Checking for other virtual interfaces sharing same radio (phy0) in event_scan_results
wlan5: Updating scan results from sibling
nl80211: Received scan results (0 BSSes)
wlan5: BSS: Start scan result update 1
BSS: last_scan_res_used=0/0 last_scan_full=0
wlan5: New scan results available
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
wlan5: No suitable network found
wlan5: Short-circuit new scan request since there are no enabled networks
wlan5: State: DISCONNECTED -> INACTIVE
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
P2P: Use specific SSID for scan during P2P group formation
p2p-wlan5-0: P2P: Scan only GO preferred frequency 5240 MHz
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (2108)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (3)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (0)
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Device Name
WPS: * Version2 (0x20)
WPS: * Request to Enroll (1)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 1
p2p-wlan5-0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
nl80211: Scan extra IEs - hexdump(len=144): dd 6c 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 97 71 b0 a8 da ca 57 bf 99 80 01 b3 3f 50 26 de 10 54 00 08 00 00 00 00 00 00 00 00 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 01 20 10 23 00 01 20 10 24 00 01 20 10 11 00 01 20 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00 dd 11 50 6f 9a 09 02 02 00 25 00 06 05 00 55 53 04 51 01
nl80211: Scan frequency 5240 MHz
nl80211: P2P probe - mask SuppRates
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
p2p-wlan5-0: nl80211: Scan trigger
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
p2p-wlan5-0: nl80211: New scan results available
p2p-wlan5-0: Event SCAN_RESULTS (3) received
nl80211: Received scan results (0 BSSes)
p2p-wlan5-0: WPS: Order scan results with WPS provisioning rules
p2p-wlan5-0: BSS: Start scan result update 2
BSS: last_scan_res_used=0/0 last_scan_full=0
p2p-wlan5-0: New scan results available
p2p-wlan5-0: No suitable network found
p2p-wlan5-0: Setting scan request: 0 sec 250000 usec
p2p-wlan5-0: Checking for other virtual interfaces sharing same radio (phy0) in event_scan_results
wlan5: Updating scan results from sibling
nl80211: Received scan results (0 BSSes)
wlan5: BSS: Start scan result update 2
BSS: last_scan_res_used=0/0 last_scan_full=0
wlan5: New scan results available
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
wlan5: No suitable network found
wlan5: Short-circuit new scan request since there are no enabled networks
wlan5: State: INACTIVE -> INACTIVE
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
P2P: Use specific SSID for scan during P2P group formation
p2p-wlan5-0: P2P: Scan only GO preferred frequency 5240 MHz
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (2108)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (3)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (0)
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Device Name
WPS: * Version2 (0x20)
WPS: * Request to Enroll (1)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 1
p2p-wlan5-0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
nl80211: Scan extra IEs - hexdump(len=144): dd 6c 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 97 71 b0 a8 da ca 57 bf 99 80 01 b3 3f 50 26 de 10 54 00 08 00 00 00 00 00 00 00 00 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 01 20 10 23 00 01 20 10 24 00 01 20 10 11 00 01 20 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00 dd 11 50 6f 9a 09 02 02 00 25 00 06 05 00 55 53 04 51 01
nl80211: Scan frequency 5240 MHz
nl80211: P2P probe - mask SuppRates
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
p2p-wlan5-0: nl80211: Scan trigger
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
p2p-wlan5-0: nl80211: New scan results available
p2p-wlan5-0: Event SCAN_RESULTS (3) received
nl80211: Received scan results (0 BSSes)
p2p-wlan5-0: WPS: Order scan results with WPS provisioning rules
p2p-wlan5-0: BSS: Start scan result update 3
BSS: last_scan_res_used=0/0 last_scan_full=0
p2p-wlan5-0: New scan results available
p2p-wlan5-0: No suitable network found
p2p-wlan5-0: Setting scan request: 0 sec 250000 usec
p2p-wlan5-0: Checking for other virtual interfaces sharing same radio (phy0) in event_scan_results
wlan5: Updating scan results from sibling
nl80211: Received scan results (0 BSSes)
wlan5: BSS: Start scan result update 3
BSS: last_scan_res_used=0/0 last_scan_full=0
wlan5: New scan results available
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
wlan5: No suitable network found
wlan5: Short-circuit new scan request since there are no enabled networks
wlan5: State: INACTIVE -> INACTIVE
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
P2P: Use specific SSID for scan during P2P group formation
p2p-wlan5-0: P2P: Scan only GO preferred frequency 5240 MHz
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (2108)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (3)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (0)
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Device Name
WPS: * Version2 (0x20)
WPS: * Request to Enroll (1)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 1
p2p-wlan5-0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
nl80211: Scan extra IEs - hexdump(len=144): dd 6c 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 97 71 b0 a8 da ca 57 bf 99 80 01 b3 3f 50 26 de 10 54 00 08 00 00 00 00 00 00 00 00 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 01 20 10 23 00 01 20 10 24 00 01 20 10 11 00 01 20 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00 dd 11 50 6f 9a 09 02 02 00 25 00 06 05 00 55 53 04 51 01
nl80211: Scan frequency 5240 MHz
nl80211: P2P probe - mask SuppRates
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
p2p-wlan5-0: nl80211: Scan trigger
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
p2p-wlan5-0: nl80211: New scan results available
p2p-wlan5-0: Event SCAN_RESULTS (3) received
nl80211: Received scan results (0 BSSes)
p2p-wlan5-0: WPS: Order scan results with WPS provisioning rules
p2p-wlan5-0: BSS: Start scan result update 4
BSS: last_scan_res_used=0/0 last_scan_full=0
p2p-wlan5-0: New scan results available
p2p-wlan5-0: No suitable network found
p2p-wlan5-0: Setting scan request: 0 sec 250000 usec
p2p-wlan5-0: Checking for other virtual interfaces sharing same radio (phy0) in event_scan_results
wlan5: Updating scan results from sibling
nl80211: Received scan results (0 BSSes)
wlan5: BSS: Start scan result update 4
BSS: last_scan_res_used=0/0 last_scan_full=0
wlan5: New scan results available
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
wlan5: No suitable network found
wlan5: Short-circuit new scan request since there are no enabled networks
wlan5: State: INACTIVE -> INACTIVE
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
P2P: Use specific SSID for scan during P2P group formation
p2p-wlan5-0: P2P: Scan only common channels
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (2108)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (3)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (0)
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Device Name
WPS: * Version2 (0x20)
WPS: * Request to Enroll (1)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 1
p2p-wlan5-0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
nl80211: Scan extra IEs - hexdump(len=144): dd 6c 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 97 71 b0 a8 da ca 57 bf 99 80 01 b3 3f 50 26 de 10 54 00 08 00 00 00 00 00 00 00 00 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 21 00 01 20 10 23 00 01 20 10 24 00 01 20 10 11 00 01 20 10 49 00 09 00 37 2a 00 01 20 03 01 01 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00 dd 11 50 6f 9a 09 02 02 00 25 00 06 05 00 55 53 04 51 01
nl80211: Scan frequency 2412 MHz
nl80211: Scan frequency 2417 MHz
nl80211: Scan frequency 2422 MHz
nl80211: Scan frequency 2427 MHz
nl80211: Scan frequency 2432 MHz
nl80211: Scan frequency 2437 MHz
nl80211: Scan frequency 2442 MHz
nl80211: Scan frequency 2447 MHz
nl80211: Scan frequency 2452 MHz
nl80211: Scan frequency 2457 MHz
nl80211: Scan frequency 2462 MHz
nl80211: Scan frequency 2472 MHz
nl80211: P2P probe - mask SuppRates
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
p2p-wlan5-0: nl80211: Scan trigger
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
p2p-wlan5-0: nl80211: New scan results available
p2p-wlan5-0: Event SCAN_RESULTS (3) received
nl80211: Received scan results (1 BSSes)
p2p-wlan5-0: WPS: Order scan results with WPS provisioning rules
p2p-wlan5-0: BSS: Start scan result update 5
p2p-wlan5-0: BSS: Add new id 0 BSSID 62:21:c0:99:08:b1 SSID 'DIRECT-fC-Android_a7ca'
BSS: last_scan_res_used=1/32 last_scan_full=0
p2p-wlan5-0: New scan results available
WPS: AP 62:21:c0:99:08:b1 type 2 added
WPS: AP[0] 62:21:c0:99:08:b1 type=2 tries=0 last_attempt=-1 sec ago blacklist=0
p2p-wlan5-0: Selecting BSS from priority group 0
p2p-wlan5-0: 0: 62:21:c0:99:08:b1 ssid='DIRECT-fC-Android_a7ca' wpa_ie_len=0 rsn_ie_len=20 caps=0x511 level=-15 wps
selected based on WPS IE (Authorized MAC or Active PIN)
p2p-wlan5-0: selected BSS 62:21:c0:99:08:b1 ssid='DIRECT-fC-Android_a7ca'
p2p-wlan5-0: Considering connect request: reassociate: 1 selected: 62:21:c0:99:08:b1 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x1faae00 current_ssid=(nil)
p2p-wlan5-0: Request association with 62:21:c0:99:08:b1
p2p-wlan5-0: Automatic auth_alg selection: 0x1
WPS: Building WPS IE for (Re)Association Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Version2 (0x20)
p2p-wlan5-0: WPA: clearing AP WPA IE
p2p-wlan5-0: WPA: clearing AP RSN IE
p2p-wlan5-0: WPA: clearing own WPA/RSN IE
P2P: * P2P IE header
P2P: * Capability dev=27 group=00
P2P: * Device Info
p2p-wlan5-0: Cancelling scan request
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
p2p-wlan5-0: SME: Trying to authenticate with 62:21:c0:99:08:b1 (SSID='DIRECT-fC-Android_a7ca' freq=2412 MHz)
p2p-wlan5-0: No keys have been configured - skip key clearing
p2p-wlan5-0: State: SCANNING -> AUTHENTICATING
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - EAP fail=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - portControl=Auto
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
nl80211: Set mode ifindex 6 iftype 8 (P2P_CLIENT)
nl80211: Subscribe to mgmt frames with non-AP handle 0x1fa8b10
nl80211: Register frame type=0xd0 nl_handle=0x1fa8b10
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Register frame type=0xd0 nl_handle=0x1fa8b10
nl80211: Register frame match - hexdump(len=2): 04 0b
nl80211: Register frame type=0xd0 nl_handle=0x1fa8b10
nl80211: Register frame match - hexdump(len=2): 04 0c
nl80211: Register frame type=0xd0 nl_handle=0x1fa8b10
nl80211: Register frame match - hexdump(len=2): 04 0d
nl80211: Register frame type=0xd0 nl_handle=0x1fa8b10
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09
nl80211: Register frame type=0xd0 nl_handle=0x1fa8b10
nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09
nl80211: Register frame type=0xd0 nl_handle=0x1fa8b10
nl80211: Register frame match - hexdump(len=1): 06
nl80211: Register frame type=0xd0 nl_handle=0x1fa8b10
nl80211: Register frame match - hexdump(len=2): 0a 07
nl80211: Register frame type=0xd0 nl_handle=0x1fa8b10
nl80211: Register frame match - hexdump(len=2): 0a 11
nl80211: Authenticate (ifindex=6)
* bssid=62:21:c0:99:08:b1
* freq=2412
* SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
RSN: Ignored PMKID candidate without preauth flag
nl80211: Event message available
nl80211: New station 62:21:c0:99:08:b1
nl80211: Event message available
nl80211: MLME event 37 on p2p-wlan5-0(02:0b:6b:7f:92:56) A1=02:0b:6b:7f:92:56 A2=62:21:c0:99:08:b1
nl80211: MLME event frame - hexdump(len=41): b0 00 3c 00 02 0b 6b 7f 92 56 62 21 c0 99 08 b1 62 21 c0 99 08 b1 20 02 00 00 02 00 00 00 dd 09 00 10 18 02 00 00 0c 00 00
nl80211: Authenticate event
p2p-wlan5-0: Event AUTH (11) received
p2p-wlan5-0: SME: Authentication response: peer=62:21:c0:99:08:b1 auth_type=0 auth_transaction=2 status_code=0
SME: Authentication response IEs - hexdump(len=11): dd 09 00 10 18 02 00 00 0c 00 00
p2p-wlan5-0: Trying to associate with 62:21:c0:99:08:b1 (SSID='DIRECT-fC-Android_a7ca' freq=2412 MHz)
p2p-wlan5-0: State: AUTHENTICATING -> ASSOCIATING
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
p2p-wlan5-0: WPA: clearing own WPA/RSN IE
nl80211: Associate (ifindex=6)
* bssid=62:21:c0:99:08:b1
* freq=2412
* SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
* IEs - hexdump(len=84): dd 18 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 49 00 06 00 37 2a 00 01 20 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00 dd 29 50 6f 9a 09 02 02 00 27 00 0d 1d 00 00 0b 6b 7f 92 56 01 08 00 01 00 50 f2 04 00 01 00 10 11 00 08 6b 65 76 69 6e 2d 70 63
* P2P group
nl80211: Association request send successfully
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
nl80211: MLME event 38 on p2p-wlan5-0(02:0b:6b:7f:92:56) A1=02:0b:6b:7f:92:56 A2=62:21:c0:99:08:b1
nl80211: MLME event frame - hexdump(len=176): 10 00 3c 00 02 0b 6b 7f 92 56 62 21 c0 99 08 b1 62 21 c0 99 08 b1 30 02 31 04 00 00 01 c0 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d 16 01 08 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20 dd 09 00 10 18 02 00 00 0c 00 00 dd 18 00 50 f2 02 01 01 84 00 03 64 00 00 27 a4 00 00 41 43 5e 00 61 32 2f 00 dd 04 50 6f 9a 09
nl80211: Associate event
p2p-wlan5-0: Event ASSOC (0) received
p2p-wlan5-0: Association info event
resp_ies - hexdump(len=146): 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d 16 01 08 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20 dd 09 00 10 18 02 00 00 0c 00 00 dd 18 00 50 f2 02 01 01 84 00 03 64 00 00 27 a4 00 00 41 43 5e 00 61 32 2f 00 dd 04 50 6f 9a 09
p2p-wlan5-0: freq=2412 MHz
p2p-wlan5-0: State: ASSOCIATING -> ASSOCIATED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
p2p-wlan5-0: Associated to a new BSS: BSSID=62:21:c0:99:08:b1
p2p-wlan5-0: No keys have been configured - skip key clearing
p2p-wlan5-0: Associated with 62:21:c0:99:08:b1
p2p-wlan5-0: WPA: Association event - clear replay counter
p2p-wlan5-0: WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 62:21:c0:99:08:b1
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 62:21:c0:99:08:b1
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
p2p-wlan5-0: Setting authentication timeout: 10 sec 0 usec
p2p-wlan5-0: Cancelling scan request
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
nl80211: Event message available
nl80211: Ignore connect event (cmd=46) when using userspace SME
nl80211: Event message available
nl80211: Regulatory domain change
p2p-wlan5-0: Event CHANNEL_LIST_CHANGED (31) received
nl80211: Regulatory information - country=GB
nl80211: 2402-2482 @ 40 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5250-5330 @ 40 MHz
nl80211: 5490-5710 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
p2p-wlan5-0: RX EAPOL from 62:21:c0:99:08:b1
RX EAPOL - hexdump(len=9): 02 00 00 05 01 92 00 05 01
p2p-wlan5-0: Setting authentication timeout: 70 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=146 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
p2p-wlan5-0: CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: Status notification: started (param=)
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using real identity - hexdump_ascii(len=29):
57 46 41 2d 53 69 6d 70 6c 65 43 6f 6e 66 69 67 WFA-SimpleConfig
2d 45 6e 72 6f 6c 6c 65 65 2d 31 2d 30 -Enrollee-1-0
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=62:21:c0:99:08:b1
TX EAPOL - hexdump(len=38): 01 00 00 22 02 92 00 22 01 57 46 41 2d 53 69 6d 70 6c 65 43 6f 6e 66 69 67 2d 45 6e 72 6f 6c 6c 65 65 2d 31 2d 30
EAPOL: SUPP_BE entering state RECEIVE
p2p-wlan5-0: RX EAPOL from 62:21:c0:99:08:b1
RX EAPOL - hexdump(len=18): 02 00 00 0e 01 93 00 0e fe 00 37 2a 00 00 00 01 01 00
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=147 method=254 vendor=14122 vendorMethod=1
EAP: EAP entering state GET_METHOD
p2p-wlan5-0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=14122 method=1
EAP: Status notification: accept proposed method (param=WSC)
EAP: Initialize selected EAP method: vendor 14122 method 1 (WSC)
WPS: AP PIN dev_password - hexdump(len=8): [REMOVED]
EAP-WSC: Fragment size limit 1398
p2p-wlan5-0: CTRL-EVENT-EAP-METHOD EAP vendor 14122 method 1 (WSC) selected
EAP: EAP entering state METHOD
EAP-WSC: Received packet: Op-Code 1 Flags 0x0 Message Length 0
EAP-WSC: Received start
EAP-WSC: WAIT_START -> MESG
Get randomness: len=16 entropy=2
WPS: Enrollee Nonce - hexdump(len=16): 6b 64 05 a1 88 05 17 2b 67 cc 78 5a af fe 74 35
WPS: Building Message M1
WPS: * Version (hardcoded 0x10)
WPS: * Message Type (4)
WPS: * UUID-E
WPS: * MAC Address (02:0b:6b:7f:92:56)
WPS: * Enrollee Nonce
WPS: * Public Key
WPS: Generate new DH keys
WPS: DH Private Key - hexdump(len=192): [REMOVED]
WPS: DH own Public Key - hexdump(len=192): 8f c7 40 08 e9 70 3d cf 8e 1b 02 f9 38 1b 30 bf a7 b8 20 9e 45 09 62 b0 87 9b e0 10 5d 3f 92 e0 f1 c8 e5 7d b1 1d f6 5c 93 14 32 f7 72 59 54 af ba e7 39 4a 67 cd 95 df 46 e0 42 f1 cf d5 b5 76 c4 d9 63 f0 8e 1a 61 fa 63 0d 98 1f 29 91 7c 38 1a 36 87 8d 79 b3 9d 80 ee 45 5b e0 25 be 79 3f 29 9a 7d e3 69 52 bf cf 32 52 4f 58 22 ba 5c e0 69 eb 5a 3a f6 50 c1 1e 16 32 68 5c a6 a3 6b 31 14 87 d3 02 36 dc 81 d7 7b b1 a0 e5 60 82 86 ff 6f 5c e0 0c bf 71 9c 6f d5 b7 2f 85 0b 11 78 39 ba b1 65 9c 81 78 bc f6 5e 47 f7 5f 7f 26 bd db d9 7d fa 13 7f e0 9f 03 d1 e8 b3 56 b6 7f 76 51
WPS: * Authentication Type Flags
WPS: * Encryption Type Flags
WPS: * Connection Type Flags
WPS: * Config Methods (2108)
WPS: * Wi-Fi Protected Setup State (1)
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Serial Number
WPS: * Primary Device Type
WPS: * Device Name
WPS: * RF Bands (3)
WPS: * Association State
WPS: * Device Password ID (0)
WPS: * Configuration Error (0)
WPS: * OS Version
WPS: * Version2 (0x20)
EAP-WSC: MESG -> MESG
EAP-WSC: Generating Response
EAP-WSC: Sending out 362 bytes (message sent completely)
EAP-WSC: MESG -> MESG
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=62:21:c0:99:08:b1
TX EAPOL - hexdump(len=380): 01 00 01 78 02 93 01 78 fe 00 37 2a 00 00 00 01 04 00 10 4a 00 01 10 10 22 00 01 04 10 47 00 10 97 71 b0 a8 da ca 57 bf 99 80 01 b3 3f 50 26 de 10 20 00 06 02 0b 6b 7f 92 56 10 1a 00 10 6b 64 05 a1 88 05 17 2b 67 cc 78 5a af fe 74 35 10 32 00 c0 8f c7 40 08 e9 70 3d cf 8e 1b 02 f9 38 1b 30 bf a7 b8 20 9e 45 09 62 b0 87 9b e0 10 5d 3f 92 e0 f1 c8 e5 7d b1 1d f6 5c 93 14 32 f7 72 59 54 af ba e7 39 4a 67 cd 95 df 46 e0 42 f1 cf d5 b5 76 c4 d9 63 f0 8e 1a 61 fa 63 0d 98 1f 29 91 7c 38 1a 36 87 8d 79 b3 9d 80 ee 45 5b e0 25 be 79 3f 29 9a 7d e3 69 52 bf cf 32 52 4f 58 22 ba 5c e0 69 eb 5a 3a f6 50 c1 1e 16 32 68 5c a6 a3 6b 31 14 87 d3 02 36 dc 81 d7 7b b1 a0 e5 60 82 86 ff 6f 5c e0 0c bf 71 9c 6f d5 b7 2f 85 0b 11 78 39 ba b1 65 9c 81 78 bc f6 5e 47 f7 5f 7f 26 bd db d9 7d fa 13 7f e0 9f 03 d1 e8 b3 56 b6 7f 76 51 10 04 00 02 00 3b 10 10 00 02 00 0d 10 0d 00 01 01 10 08 00 02 21 08 10 44 00 01 01 10 21 00 01 20 10 23 00 01 20 10 24 00 01 20 10 42 00 01 20 10 54 00 08 00 00 00 00 00 00 00 00 10 11 00 01 20 10 3c 00 01 03 10 02 00 02 00 00 10 12 00 02 00 00 10 09 00 02 00 00 10 2d 00 04 80 00 00 00 10 49 00 06 00 37 2a 00 01 20
EAPOL: SUPP_BE entering state RECEIVE
p2p-wlan5-0: RX EAPOL from 62:21:c0:99:08:b1
RX EAPOL - hexdump(len=449): 02 00 01 bd 01 94 01 bd fe 00 37 2a 00 00 00 01 04 00 10 4a 00 01 10 10 22 00 01 05 10 1a 00 10 6b 64 05 a1 88 05 17 2b 67 cc 78 5a af fe 74 35 10 39 00 10 e9 f3 fd c8 b8 99 de 1c 76 ea ea e8 27 15 bb 53 10 48 00 10 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9 10 32 00 c0 30 6c e3 31 25 66 a5 30 a4 45 c0 2f d9 36 c0 9a f9 55 c6 ed ad a9 c7 a2 e8 28 f6 06 a3 1d 13 e0 1e 3c 8d 3c 65 05 35 f7 0f 0f 1d 24 b9 9f 1b 6e d5 a3 56 85 1e 5d ad c0 16 cc cb 39 39 54 d9 3e 40 21 e8 e2 c2 a5 46 24 c2 db 3a b2 66 8b ef 7d 97 fb 31 2b 05 e3 15 0f 2a b8 cc b5 02 af 35 06 74 f0 a5 ac 23 3a 05 8b b6 33 51 9d 84 da 1f db 53 e0 bf 0a 84 d8 ef 0a 46 0c 79 49 6c 12 c8 99 ed 94 cc 75 15 f5 af ab 80 1c e8 b9 38 ec 11 03 47 84 4e 18 f1 6a d2 93 a5 ea 6d 31 18 d1 71 79 51 2e 86 41 5e 9f fe 7e a0 0e f7 8d dc 86 47 52 f8 ca a9 ce 42 ec f3 b7 97 ac 00 87 ed 41 e5 1a 10 04 00 02 00 3b 10 10 00 02 00 0d 10 0d 00 01 01 10 08 00 02 43 88 10 21 00 13 53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e 49 43 53 10 23 00 0e 53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 10 24 00 04 32 30 31 32 10 42 00 08 31 39 36 39 31 31 30 31 10 54 00 08 00 0a 00 50 f2 04 00 05 10 11 00 0c 41 6e 64 72 6f 69 64 5f 61 37 63 61 10 3c 00 01 01 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 00 10 2d 00 04 80 00 00 00 10 49 00 06 00 37 2a 00 01 20 10 05 00 08 96 f9 19 ca 99 f3 a6 20
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=148 method=254 vendor=14122 vendorMethod=1
EAP: EAP entering state METHOD
EAP-WSC: Received packet: Op-Code 4 Flags 0x0 Message Length 0
WPS: Processing received message (len=431 op_code=4)
WPS: Received WSC_MSG
WPS: Received M2
WPS: Registrar Nonce - hexdump(len=16): e9 f3 fd c8 b8 99 de 1c 76 ea ea e8 27 15 bb 53
WPS: UUID-R - hexdump(len=16): 34 e6 cb 58 77 e0 5f db 94 f5 e0 e3 4d 80 d0 f9
WPS: Device Password ID 0
WPS: DH Private Key - hexdump(len=192): [REMOVED]
WPS: DH peer Public Key - hexdump(len=192): 30 6c e3 31 25 66 a5 30 a4 45 c0 2f d9 36 c0 9a f9 55 c6 ed ad a9 c7 a2 e8 28 f6 06 a3 1d 13 e0 1e 3c 8d 3c 65 05 35 f7 0f 0f 1d 24 b9 9f 1b 6e d5 a3 56 85 1e 5d ad c0 16 cc cb 39 39 54 d9 3e 40 21 e8 e2 c2 a5 46 24 c2 db 3a b2 66 8b ef 7d 97 fb 31 2b 05 e3 15 0f 2a b8 cc b5 02 af 35 06 74 f0 a5 ac 23 3a 05 8b b6 33 51 9d 84 da 1f db 53 e0 bf 0a 84 d8 ef 0a 46 0c 79 49 6c 12 c8 99 ed 94 cc 75 15 f5 af ab 80 1c e8 b9 38 ec 11 03 47 84 4e 18 f1 6a d2 93 a5 ea 6d 31 18 d1 71 79 51 2e 86 41 5e 9f fe 7e a0 0e f7 8d dc 86 47 52 f8 ca a9 ce 42 ec f3 b7 97 ac 00 87 ed 41 e5 1a
WPS: DH shared key - hexdump(len=192): [REMOVED]
WPS: DHKey - hexdump(len=32): [REMOVED]
WPS: KDK - hexdump(len=32): [REMOVED]
WPS: AuthKey - hexdump(len=32): [REMOVED]
WPS: KeyWrapKey - hexdump(len=16): [REMOVED]
WPS: EMSK - hexdump(len=32): [REMOVED]
WPS: Manufacturer - hexdump_ascii(len=19):
53 41 4d 53 55 4e 47 5f 45 4c 45 43 54 52 4f 4e SAMSUNG_ELECTRON
49 43 53 ICS
WPS: Model Name - hexdump_ascii(len=14):
53 41 4d 53 55 4e 47 5f 4d 4f 42 49 4c 45 SAMSUNG_MOBILE
WPS: Model Number - hexdump_ascii(len=4):
32 30 31 32 2012
WPS: Serial Number - hexdump_ascii(len=8):
31 39 36 39 31 31 30 31 19691101
WPS: Primary Device Type: 10-0050F204-5
WPS: Device Name - hexdump_ascii(len=12):
41 6e 64 72 6f 69 64 5f 61 37 63 61 Android_a7ca
EAP-WSC: MESG -> MESG
WPS: Building Message M3
WPS: Device Password - hexdump_ascii(len=8): [REMOVED]
WPS: PSK1 - hexdump(len=16): [REMOVED]
WPS: PSK2 - hexdump(len=16): [REMOVED]
WPS: * Version (hardcoded 0x10)
WPS: * Message Type (7)
WPS: * Registrar Nonce
Get randomness: len=32 entropy=0
WPS: E-S1 - hexdump(len=16): bd 18 5c c7 2d 64 47 6d 90 8f bd e9 b4 bf 28 4e
WPS: E-S2 - hexdump(len=16): c6 27 07 a1 37 36 e5 9f f2 cc 7b 0a df 57 26 fe
WPS: * E-Hash1
WPS: E-Hash1 - hexdump(len=32): 18 88 99 1d 8b 22 74 ec 27 6a c0 05 2c bc 7e 1d 11 89 69 35 fc 52 8e 2b af 56 79 4f e0 8b 23 0e
WPS: * E-Hash2
WPS: E-Hash2 - hexdump(len=32): 70 1b d8 e9 bb 0e 43 f4 bd 00 c3 62 ee e7 d2 41 ff 1a e7 55 09 29 04 61 8f 2c 82 16 a1 15 e1 ed
WPS: * Version2 (0x20)
WPS: * Authenticator
EAP-WSC: MESG -> MESG
EAP-WSC: Generating Response
EAP-WSC: Sending out 124 bytes (message sent completely)
EAP-WSC: MESG -> MESG
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=62:21:c0:99:08:b1
TX EAPOL - hexdump(len=142): 01 00 00 8a 02 94 00 8a fe 00 37 2a 00 00 00 01 04 00 10 4a 00 01 10 10 22 00 01 07 10 39 00 10 e9 f3 fd c8 b8 99 de 1c 76 ea ea e8 27 15 bb 53 10 14 00 20 18 88 99 1d 8b 22 74 ec 27 6a c0 05 2c bc 7e 1d 11 89 69 35 fc 52 8e 2b af 56 79 4f e0 8b 23 0e 10 15 00 20 70 1b d8 e9 bb 0e 43 f4 bd 00 c3 62 ee e7 d2 41 ff 1a e7 55 09 29 04 61 8f 2c 82 16 a1 15 e1 ed 10 49 00 06 00 37 2a 00 01 20 10 05 00 08 8d 96 38 38 61 9e 7f 10
EAPOL: SUPP_BE entering state RECEIVE
p2p-wlan5-0: RX EAPOL from 62:21:c0:99:08:b1
RX EAPOL - hexdump(len=210): 02 00 00 ce 01 95 00 ce fe 00 37 2a 00 00 00 01 04 00 10 4a 00 01 10 10 22 00 01 08 10 1a 00 10 6b 64 05 a1 88 05 17 2b 67 cc 78 5a af fe 74 35 10 3d 00 20 d7 56 31 67 ab 08 b7 77 bb bc 28 e6 da 61 01 2f 68 97 3f d0 d5 c2 4d 53 29 59 71 e5 62 15 33 43 10 3e 00 20 7c 81 8f c4 43 a6 e1 d1 99 47 6f 7b a7 d9 29 bf a1 89 0f 4c da 25 c6 a3 38 80 71 78 b0 3c 90 dd 10 18 00 40 97 26 c5 19 d8 5e cb dd 0e 5d 33 55 dc 44 32 0f cf 08 c6 e6 82 5b 0d a1 39 9d f0 33 76 01 fe 47 61 17 83 ab 18 c0 b9 64 8e f9 b1 bf d4 52 65 3a 90 62 fe 7d cf e9 f2 e2 a8 56 c6 1a 02 3f 68 b2 10 49 00 06 00 37 2a 00 01 20 10 05 00 08 11 5f 94 9d 1e 3c 6a d6
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=149 method=254 vendor=14122 vendorMethod=1
EAP: EAP entering state METHOD
EAP-WSC: Received packet: Op-Code 4 Flags 0x0 Message Length 0
WPS: Processing received message (len=192 op_code=4)
WPS: Received WSC_MSG
WPS: Received M4
WPS: R-Hash1 - hexdump(len=32): d7 56 31 67 ab 08 b7 77 bb bc 28 e6 da 61 01 2f 68 97 3f d0 d5 c2 4d 53 29 59 71 e5 62 15 33 43
WPS: R-Hash2 - hexdump(len=32): 7c 81 8f c4 43 a6 e1 d1 99 47 6f 7b a7 d9 29 bf a1 89 0f 4c da 25 c6 a3 38 80 71 78 b0 3c 90 dd
WPS: Encrypted Settings - hexdump(len=64): 97 26 c5 19 d8 5e cb dd 0e 5d 33 55 dc 44 32 0f cf 08 c6 e6 82 5b 0d a1 39 9d f0 33 76 01 fe 47 61 17 83 ab 18 c0 b9 64 8e f9 b1 bf d4 52 65 3a 90 62 fe 7d cf e9 f2 e2 a8 56 c6 1a 02 3f 68 b2
WPS: Decrypted Encrypted Settings - hexdump(len=48): [REMOVED]
WPS: Processing decrypted Encrypted Settings attribute
WPS: R-SNonce1 - hexdump(len=16): [REMOVED]
WPS: Registrar proved knowledge of the first half of the device password
EAP-WSC: MESG -> MESG
WPS: Building Message M5
WPS: * Version (hardcoded 0x10)
WPS: * Message Type (9)
WPS: * Registrar Nonce
WPS: * E-SNonce1
WPS: * Key Wrap Authenticator
WPS: * Encrypted Settings
Get randomness: len=16 entropy=0
WPS: * Version2 (0x20)
WPS: * Authenticator
EAP-WSC: MESG -> MESG
EAP-WSC: Generating Response
EAP-WSC: Sending out 120 bytes (message sent completely)
EAP-WSC: MESG -> MESG
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=62:21:c0:99:08:b1
TX EAPOL - hexdump(len=138): 01 00 00 86 02 95 00 86 fe 00 37 2a 00 00 00 01 04 00 10 4a 00 01 10 10 22 00 01 09 10 39 00 10 e9 f3 fd c8 b8 99 de 1c 76 ea ea e8 27 15 bb 53 10 18 00 40 64 22 bd af 84 52 47 21 c0 38 36 fe 43 e8 27 83 98 e3 15 db 88 bf 54 b5 63 4b 68 1d 51 78 09 7b 81 73 ed dc 15 74 36 ed e8 57 a7 ef be 0a 26 e9 d9 56 a8 6c 7d 47 24 fe a9 36 f4 0f 9f ab be e0 10 49 00 06 00 37 2a 00 01 20 10 05 00 08 c3 ab cb 02 d7 40 8c eb
EAPOL: SUPP_BE entering state RECEIVE
p2p-wlan5-0: RX EAPOL from 62:21:c0:99:08:b1
RX EAPOL - hexdump(len=138): 02 00 00 86 01 96 00 86 fe 00 37 2a 00 00 00 01 04 00 10 4a 00 01 10 10 22 00 01 0a 10 1a 00 10 6b 64 05 a1 88 05 17 2b 67 cc 78 5a af fe 74 35 10 18 00 40 f7 3d 7f 8e 5f 1b 2a b9 72 a4 65 fb a1 1c b7 da df e1 c4 30 63 11 00 e0 7f 53 f8 d1 8e 62 ed a0 b0 c4 07 3f e1 af f0 6a b3 b4 75 17 1b 86 d9 d2 de 73 cd 4b 1e 6f 20 1e 68 ec cc 17 65 fe aa 45 10 49 00 06 00 37 2a 00 01 20 10 05 00 08 4a e4 59 eb 4a 7d 1f 67
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=150 method=254 vendor=14122 vendorMethod=1
EAP: EAP entering state METHOD
EAP-WSC: Received packet: Op-Code 4 Flags 0x0 Message Length 0
WPS: Processing received message (len=120 op_code=4)
WPS: Received WSC_MSG
WPS: Received M6
WPS: Encrypted Settings - hexdump(len=64): f7 3d 7f 8e 5f 1b 2a b9 72 a4 65 fb a1 1c b7 da df e1 c4 30 63 11 00 e0 7f 53 f8 d1 8e 62 ed a0 b0 c4 07 3f e1 af f0 6a b3 b4 75 17 1b 86 d9 d2 de 73 cd 4b 1e 6f 20 1e 68 ec cc 17 65 fe aa 45
WPS: Decrypted Encrypted Settings - hexdump(len=48): [REMOVED]
WPS: Processing decrypted Encrypted Settings attribute
WPS: R-SNonce2 - hexdump(len=16): [REMOVED]
WPS: Registrar proved knowledge of the second half of the device password
EAP-WSC: MESG -> MESG
WPS: Building Message M7
WPS: * Version (hardcoded 0x10)
WPS: * Message Type (11)
WPS: * Registrar Nonce
WPS: * E-SNonce2
WPS: * Key Wrap Authenticator
WPS: * Encrypted Settings
Get randomness: len=16 entropy=0
WPS: * Version2 (0x20)
WPS: * Authenticator
EAP-WSC: MESG -> MESG
EAP-WSC: Generating Response
EAP-WSC: Sending out 120 bytes (message sent completely)
EAP-WSC: MESG -> MESG
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=62:21:c0:99:08:b1
TX EAPOL - hexdump(len=138): 01 00 00 86 02 96 00 86 fe 00 37 2a 00 00 00 01 04 00 10 4a 00 01 10 10 22 00 01 0b 10 39 00 10 e9 f3 fd c8 b8 99 de 1c 76 ea ea e8 27 15 bb 53 10 18 00 40 7e d2 df e4 7d 47 52 62 85 dd 4e ab 0a 21 8f 92 dc f5 87 a2 fa af 61 02 5d 47 cf 66 a2 25 b4 29 17 31 6a 53 6a 25 39 63 c9 a8 40 5e c8 f8 eb 1d ce 56 53 eb 23 d9 95 a1 b1 f9 93 4c 98 9e 8a 50 10 49 00 06 00 37 2a 00 01 20 10 05 00 08 29 df 12 6c 49 87 fd b9
EAPOL: SUPP_BE entering state RECEIVE
p2p-wlan5-0: RX EAPOL from 62:21:c0:99:08:b1
RX EAPOL - hexdump(len=234): 02 00 00 e6 01 97 00 e6 fe 00 37 2a 00 00 00 01 04 00 10 4a 00 01 10 10 22 00 01 0c 10 1a 00 10 6b 64 05 a1 88 05 17 2b 67 cc 78 5a af fe 74 35 10 18 00 a0 8b 5a 41 70 40 1f d6 75 50 53 da 6e ce 4f c3 d6 a6 ea 90 75 b1 0c 03 ba 81 8e e2 22 80 f5 37 1c a0 7d 5c fd e8 a1 f6 93 74 3f b8 44 75 b7 07 a9 3b 0b 35 96 95 48 61 2b 4f 67 2d 16 01 a6 3c c0 e2 63 8f ce e2 97 a0 ff d4 f0 bc af 90 f3 0b a6 31 ba 14 5a 2a 86 b2 cd 86 dc de 7c 9e 7c e2 f9 04 81 fc 12 af f7 8d 0a b7 36 5f 33 35 2a 8e 05 4e 2b 68 4a be de ca ff ed 36 33 91 67 27 35 dc 38 6a e1 3c 80 44 45 40 c6 6a 8d 6e fe e9 ee 5c 62 79 b0 44 e1 34 74 66 dd 42 07 45 80 87 f0 b3 10 49 00 06 00 37 2a 00 01 20 10 05 00 08 7f 2f d1 2d 0d b8 2a 71
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=151 method=254 vendor=14122 vendorMethod=1
EAP: EAP entering state METHOD
EAP-WSC: Received packet: Op-Code 4 Flags 0x0 Message Length 0
WPS: Processing received message (len=216 op_code=4)
WPS: Received WSC_MSG
WPS: Received M8
WPS: Encrypted Settings - hexdump(len=160): 8b 5a 41 70 40 1f d6 75 50 53 da 6e ce 4f c3 d6 a6 ea 90 75 b1 0c 03 ba 81 8e e2 22 80 f5 37 1c a0 7d 5c fd e8 a1 f6 93 74 3f b8 44 75 b7 07 a9 3b 0b 35 96 95 48 61 2b 4f 67 2d 16 01 a6 3c c0 e2 63 8f ce e2 97 a0 ff d4 f0 bc af 90 f3 0b a6 31 ba 14 5a 2a 86 b2 cd 86 dc de 7c 9e 7c e2 f9 04 81 fc 12 af f7 8d 0a b7 36 5f 33 35 2a 8e 05 4e 2b 68 4a be de ca ff ed 36 33 91 67 27 35 dc 38 6a e1 3c 80 44 45 40 c6 6a 8d 6e fe e9 ee 5c 62 79 b0 44 e1 34 74 66 dd 42 07 45 80 87 f0 b3
WPS: Decrypted Encrypted Settings - hexdump(len=144): [REMOVED]
WPS: Processing decrypted Encrypted Settings attribute
WPS: Received Credential
WPS: Process Credential
WPS: Network Index: 1
WPS: SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
WPS: Authentication Type: 0x20
WPS: Encryption Type: 0x8
WPS: Network Key - hexdump(len=64): [REMOVED]
WPS: MAC Address 02:0b:6b:7f:92:56
p2p-wlan5-0: WPS-CRED-RECEIVED
WPS: Received Credential attribute - hexdump(len=125): [REMOVED]
WPS: SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
WPS: Authentication Type 0x20
WPS: Encryption Type 0x8
WPS: Network Key Index 0
WPS: Network Key - hexdump(len=64): [REMOVED]
WPS: MAC Address 02:0b:6b:7f:92:56
WPS: Replace WPS network block based on the received credential
WPS: The AP was not found from BSS table - use credential as-is
EAP-WSC: MESG -> MESG
WPS: Building Message WSC_Done
WPS: * Version (hardcoded 0x10)
WPS: * Message Type (15)
WPS: * Enrollee Nonce
WPS: * Registrar Nonce
WPS: * Version2 (0x20)
p2p-wlan5-0: WPS-SUCCESS
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 21 Group Capability 49
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x188
P2P: Attribute 14 length 0
P2P: * Group Info
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 21 Group Capability 49
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x188
P2P: Attribute 14 length 0
P2P: * Group Info
P2P: Checking whether group is persistent: group_capab=0x49
P2P: GO Device Address 62:21:c0:99:88:b1
P2P: BSS 62:21:c0:99:08:b1 group_capab=0x49 go_dev_addr=62:21:c0:99:88:b1
P2P: Group Formation completed successfully with 62:21:c0:99:08:b1
P2P: Clear timeout (state=PROVISIONING)
P2P: State PROVISIONING -> IDLE
P2P-GROUP-FORMATION-SUCCESS
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 21 Group Capability 49
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x188
P2P: Attribute 14 length 0
P2P: * Group Info
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 21 Group Capability 49
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x188
P2P: Attribute 14 length 0
P2P: * Group Info
P2P: Checking whether group is persistent: group_capab=0x49
P2P: GO Device Address 62:21:c0:99:88:b1
P2P: BSS 62:21:c0:99:08:b1 group_capab=0x49 go_dev_addr=62:21:c0:99:88:b1
EAP-WSC: MESG -> MESG
EAP-WSC: Generating Response
EAP-WSC: Sending out 60 bytes (message sent completely)
EAP-WSC: MESG -> FAIL
EAP: method process -> ignore=FALSE methodState=DONE decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=62:21:c0:99:08:b1
TX EAPOL - hexdump(len=78): 01 00 00 4a 02 97 00 4a fe 00 37 2a 00 00 00 01 05 00 10 4a 00 01 10 10 22 00 01 0f 10 1a 00 10 6b 64 05 a1 88 05 17 2b 67 cc 78 5a af fe 74 35 10 39 00 10 e9 f3 fd c8 b8 99 de 1c 76 ea ea e8 27 15 bb 53 10 49 00 06 00 37 2a 00 01 20
EAPOL: SUPP_BE entering state RECEIVE
p2p-wlan5-0: RX EAPOL from 62:21:c0:99:08:b1
RX EAPOL - hexdump(len=8): 02 00 00 04 04 97 00 04
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: Status notification: completion (param=failure)
EAP: EAP entering state FAILURE
p2p-wlan5-0: CTRL-EVENT-EAP-FAILURE EAP authentication failed
EAPOL: SUPP_PAE entering state HELD
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 62:21:c0:99:08:b1
EAPOL: SUPP_BE entering state RECEIVE
EAPOL: SUPP_BE entering state FAIL
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed unsuccessfully
WPS: Network configuration replaced - try to associate with the received credential (freq=2412)
p2p-wlan5-0: Request to deauthenticate - bssid=62:21:c0:99:08:b1 pending_bssid=00:00:00:00:00:00 reason=3 state=ASSOCIATED
wpa_driver_nl80211_deauthenticate(addr=62:21:c0:99:08:b1 reason_code=3)
p2p-wlan5-0: Event DEAUTH (12) received
p2p-wlan5-0: Deauthentication notification
p2p-wlan5-0: * reason 3 (locally generated)
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
p2p-wlan5-0: CTRL-EVENT-DISCONNECTED bssid=62:21:c0:99:08:b1 reason=3 locally_generated=1
p2p-wlan5-0: Auto connect enabled: try to reconnect (wps=1 wpa_state=6)
p2p-wlan5-0: Setting scan request: 0 sec 100000 usec
Added BSSID 62:21:c0:99:08:b1 into blacklist
p2p-wlan5-0: Blacklist count 1 --> request scan in 100 ms
p2p-wlan5-0: Setting scan request: 0 sec 100000 usec
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
p2p-wlan5-0: Disconnect event - remove keys
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x1fa9540 key_idx=0 set_tx=0 seq_len=0 key_len=0
addr=62:21:c0:99:08:b1
p2p-wlan5-0: State: ASSOCIATED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
P2P: Do not use P2P group idle timeout while waiting for initial 4-way handshake to complete
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
p2p-wlan5-0: No keys have been configured - skip key clearing
p2p-wlan5-0: State: DISCONNECTED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
WPS: Checking whether fast association without a new scan can be used
p2p-wlan5-0: Selecting BSS from priority group 0
p2p-wlan5-0: 0: 62:21:c0:99:08:b1 ssid='DIRECT-fC-Android_a7ca' wpa_ie_len=0 rsn_ie_len=20 caps=0x511 level=-15 wps
p2p-wlan5-0: skip - blacklisted (count=1 limit=0)
p2p-wlan5-0: No APs found - clear blacklist and try again
Removed BSSID 62:21:c0:99:08:b1 from blacklist (clear)
p2p-wlan5-0: Selecting BSS from priority group 0
p2p-wlan5-0: 0: 62:21:c0:99:08:b1 ssid='DIRECT-fC-Android_a7ca' wpa_ie_len=0 rsn_ie_len=20 caps=0x511 level=-15 wps
p2p-wlan5-0: selected based on RSN IE
p2p-wlan5-0: selected BSS 62:21:c0:99:08:b1 ssid='DIRECT-fC-Android_a7ca'
p2p-wlan5-0: Selecting BSS from priority group 0
p2p-wlan5-0: 0: 62:21:c0:99:08:b1 ssid='DIRECT-fC-Android_a7ca' wpa_ie_len=0 rsn_ie_len=20 caps=0x511 level=-15 wps
p2p-wlan5-0: selected based on RSN IE
p2p-wlan5-0: selected BSS 62:21:c0:99:08:b1 ssid='DIRECT-fC-Android_a7ca'
p2p-wlan5-0: Considering connect request: reassociate: 1 selected: 62:21:c0:99:08:b1 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: DISCONNECTED ssid=0x1faae00 current_ssid=(nil)
p2p-wlan5-0: Request association with 62:21:c0:99:08:b1
p2p-wlan5-0: Automatic auth_alg selection: 0x1
p2p-wlan5-0: Overriding auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
RSN: Search for BSSID 62:21:c0:99:08:b1
RSN: No PMKSA cache entry found
p2p-wlan5-0: RSN: using IEEE 802.11i/D9.0
p2p-wlan5-0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
p2p-wlan5-0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
p2p-wlan5-0: WPA: using GTK CCMP
p2p-wlan5-0: WPA: using PTK CCMP
p2p-wlan5-0: WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
P2P: * P2P IE header
P2P: * Capability dev=27 group=00
P2P: * Device Info
p2p-wlan5-0: Cancelling scan request
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
p2p-wlan5-0: SME: Trying to authenticate with 62:21:c0:99:08:b1 (SSID='DIRECT-fC-Android_a7ca' freq=2412 MHz)
p2p-wlan5-0: No keys have been configured - skip key clearing
p2p-wlan5-0: State: DISCONNECTED -> AUTHENTICATING
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - EAP fail=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - portControl=Auto
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
nl80211: Authenticate (ifindex=6)
* bssid=62:21:c0:99:08:b1
* freq=2412
* SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
nl80211: Event message available
nl80211: Delete station 62:21:c0:99:08:b1
nl80211: Event message available
nl80211: MLME event 39 on p2p-wlan5-0(02:0b:6b:7f:92:56) A1=62:21:c0:99:08:b1 A2=02:0b:6b:7f:92:56
nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 62 21 c0 99 08 b1 02 0b 6b 7f 92 56 62 21 c0 99 08 b1 00 00 03 00
nl80211: Deauthenticate event
p2p-wlan5-0: Event DEAUTH (12) received
p2p-wlan5-0: Deauthentication notification
p2p-wlan5-0: * reason 3 (locally generated)
p2p-wlan5-0: * address 62:21:c0:99:08:b1
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
p2p-wlan5-0: CTRL-EVENT-DISCONNECTED bssid=62:21:c0:99:08:b1 reason=3 locally_generated=1
p2p-wlan5-0: Auto connect enabled: try to reconnect (wps=0 wpa_state=4)
p2p-wlan5-0: Do not request new immediate scan
Added BSSID 62:21:c0:99:08:b1 into blacklist
p2p-wlan5-0: Blacklist count 2 --> request scan in 500 ms
p2p-wlan5-0: Setting scan request: 0 sec 500000 usec
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
p2p-wlan5-0: Disconnect event - remove keys
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x1fa9540 key_idx=0 set_tx=0 seq_len=0 key_len=0
addr=00:00:00:00:00:00
p2p-wlan5-0: State: AUTHENTICATING -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
p2p-wlan5-0: SME: Allow pending authentication to proceed after disconnection event
p2p-wlan5-0: State: DISCONNECTED -> AUTHENTICATING
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
nl80211: Ignore disconnect event when using userspace SME
nl80211: Event message available
nl80211: New station 62:21:c0:99:08:b1
nl80211: Event message available
nl80211: MLME event 37 on p2p-wlan5-0(02:0b:6b:7f:92:56) A1=02:0b:6b:7f:92:56 A2=62:21:c0:99:08:b1
nl80211: MLME event frame - hexdump(len=41): b0 00 3c 00 02 0b 6b 7f 92 56 62 21 c0 99 08 b1 62 21 c0 99 08 b1 a0 02 00 00 02 00 00 00 dd 09 00 10 18 02 00 00 0c 00 00
nl80211: Authenticate event
p2p-wlan5-0: Event AUTH (11) received
p2p-wlan5-0: SME: Authentication response: peer=62:21:c0:99:08:b1 auth_type=0 auth_transaction=2 status_code=0
SME: Authentication response IEs - hexdump(len=11): dd 09 00 10 18 02 00 00 0c 00 00
p2p-wlan5-0: Trying to associate with 62:21:c0:99:08:b1 (SSID='DIRECT-fC-Android_a7ca' freq=2412 MHz)
p2p-wlan5-0: State: AUTHENTICATING -> ASSOCIATING
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
nl80211: Associate (ifindex=6)
* bssid=62:21:c0:99:08:b1
* freq=2412
* SSID - hexdump_ascii(len=22):
44 49 52 45 43 54 2d 66 43 2d 41 6e 64 72 6f 69 DIRECT-fC-Androi
64 5f 61 37 63 61 d_a7ca
* IEs - hexdump(len=80): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00 dd 29 50 6f 9a 09 02 02 00 27 00 0d 1d 00 00 0b 6b 7f 92 56 01 08 00 01 00 50 f2 04 00 01 00 10 11 00 08 6b 65 76 69 6e 2d 70 63
* pairwise=0xfac04
* group=0xfac04
* P2P group
nl80211: Association request send successfully
nl80211: Event message available
nl80211: Regulatory domain change
p2p-wlan5-0: Event CHANNEL_LIST_CHANGED (31) received
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz
nl80211: 2457-2482 @ 20 MHz
nl80211: 2474-2494 @ 20 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
nl80211: MLME event 38 on p2p-wlan5-0(02:0b:6b:7f:92:56) A1=02:0b:6b:7f:92:56 A2=62:21:c0:99:08:b1
nl80211: MLME event frame - hexdump(len=176): 10 00 3c 00 02 0b 6b 7f 92 56 62 21 c0 99 08 b1 62 21 c0 99 08 b1 b0 02 31 04 00 00 01 c0 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d 16 01 08 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20 dd 09 00 10 18 02 00 00 0c 00 00 dd 18 00 50 f2 02 01 01 84 00 03 64 00 00 27 a4 00 00 41 43 5e 00 61 32 2f 00 dd 04 50 6f 9a 09
nl80211: Associate event
p2p-wlan5-0: Event ASSOC (0) received
p2p-wlan5-0: Association info event
resp_ies - hexdump(len=146): 01 08 8c 12 98 24 b0 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d 16 01 08 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0d 50 6f 9a 0a 00 00 06 01 10 c0 00 00 28 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20 dd 09 00 10 18 02 00 00 0c 00 00 dd 18 00 50 f2 02 01 01 84 00 03 64 00 00 27 a4 00 00 41 43 5e 00 61 32 2f 00 dd 04 50 6f 9a 09
p2p-wlan5-0: freq=2412 MHz
p2p-wlan5-0: State: ASSOCIATING -> ASSOCIATED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
p2p-wlan5-0: Associated to a new BSS: BSSID=62:21:c0:99:08:b1
p2p-wlan5-0: No keys have been configured - skip key clearing
p2p-wlan5-0: Associated with 62:21:c0:99:08:b1
p2p-wlan5-0: WPA: Association event - clear replay counter
p2p-wlan5-0: WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 62:21:c0:99:08:b1
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 62:21:c0:99:08:b1
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
p2p-wlan5-0: Setting authentication timeout: 10 sec 0 usec
p2p-wlan5-0: Cancelling scan request
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
nl80211: Event message available
nl80211: Ignore connect event (cmd=46) when using userspace SME
nl80211: Event message available
nl80211: Regulatory domain change
p2p-wlan5-0: Event CHANNEL_LIST_CHANGED (31) received
nl80211: Regulatory information - country=US
nl80211: 2402-2472 @ 40 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5250-5330 @ 40 MHz
nl80211: 5490-5600 @ 40 MHz
nl80211: 5650-5710 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
nl80211: Event message available
nl80211: Regulatory domain change
p2p-wlan5-0: Event CHANNEL_LIST_CHANGED (31) received
nl80211: Regulatory information - country=GB
nl80211: 2402-2482 @ 40 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5250-5330 @ 40 MHz
nl80211: 5490-5710 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
p2p-wlan5-0: RX EAPOL from 62:21:c0:99:08:b1
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 67 66 bd 2c 37 f9 5c 35 40 9e cf 1b 61 86 d0 3d 38 e9 7b a1 10 38 ac 5b 1b 8e fd 49 41 66 23 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
p2p-wlan5-0: Setting authentication timeout: 10 sec 0 usec
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
p2p-wlan5-0: IEEE 802.1X RX: version=2 type=3 length=95
p2p-wlan5-0: EAPOL-Key type=2
p2p-wlan5-0: key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
p2p-wlan5-0: key_length=16 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
key_nonce - hexdump(len=32): 67 66 bd 2c 37 f9 5c 35 40 9e cf 1b 61 86 d0 3d 38 e9 7b a1 10 38 ac 5b 1b 8e fd 49 41 66 23 27
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 67 66 bd 2c 37 f9 5c 35 40 9e cf 1b 61 86 d0 3d 38 e9 7b a1 10 38 ac 5b 1b 8e fd 49 41 66 23 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
p2p-wlan5-0: State: ASSOCIATED -> 4WAY_HANDSHAKE
p2p-wlan5-0: WPA: RX message 1 of 4-Way Handshake from 62:21:c0:99:08:b1 (ver=2)
RSN: msg 1/4 key data - hexdump(len=0):
Get randomness: len=32 entropy=1
WPA: Renewed SNonce - hexdump(len=32): d3 c2 e7 ac 0e 53 af 0f 75 13 c3 d1 9a c6 00 12 cc 5a f5 d3 f2 37 cf 41 60 7b be ab c0 08 87 55
WPA: PTK derivation - A1=02:0b:6b:7f:92:56 A2=62:21:c0:99:08:b1
WPA: Nonce1 - hexdump(len=32): d3 c2 e7 ac 0e 53 af 0f 75 13 c3 d1 9a c6 00 12 cc 5a f5 d3 f2 37 cf 41 60 7b be ab c0 08 87 55
WPA: Nonce2 - hexdump(len=32): 67 66 bd 2c 37 f9 5c 35 40 9e cf 1b 61 86 d0 3d 38 e9 7b a1 10 38 ac 5b 1b 8e fd 49 41 66 23 27
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
p2p-wlan5-0: WPA: Sending EAPOL-Key 2/4
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): 5b 7d 84 c5 4a 6f 06 17 07 d0 4d 21 e7 17 ac 35
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 d3 c2 e7 ac 0e 53 af 0f 75 13 c3 d1 9a c6 00 12 cc 5a f5 d3 f2 37 cf 41 60 7b be ab c0 08 87 55 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5b 7d 84 c5 4a 6f 06 17 07 d0 4d 21 e7 17 ac 35 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
p2p-wlan5-0: RX EAPOL from 62:21:c0:99:08:b1
RX EAPOL - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 67 66 bd 2c 37 f9 5c 35 40 9e cf 1b 61 86 d0 3d 38 e9 7b a1 10 38 ac 5b 1b 8e fd 49 41 66 23 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e6 83 5c 0b 60 99 aa c0 fc 36 13 58 b8 27 24 fa 00 38 e7 bb bd a3 24 3e 66 f4 54 b3 a2 99 69 2b 7a f1 b5 f4 77 e1 87 ae 03 ca ed e2 eb 89 e7 0a 02 0c c2 f7 98 67 5a d5 bc d3 57 3d 0d 55 5b c1 e4 fc 0d fc b7 8f d1 a8 e9 3d
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
p2p-wlan5-0: IEEE 802.1X RX: version=2 type=3 length=151
p2p-wlan5-0: EAPOL-Key type=2
p2p-wlan5-0: key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
p2p-wlan5-0: key_length=16 key_data_length=56
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
key_nonce - hexdump(len=32): 67 66 bd 2c 37 f9 5c 35 40 9e cf 1b 61 86 d0 3d 38 e9 7b a1 10 38 ac 5b 1b 8e fd 49 41 66 23 27
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): e6 83 5c 0b 60 99 aa c0 fc 36 13 58 b8 27 24 fa
WPA: RX EAPOL-Key - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 67 66 bd 2c 37 f9 5c 35 40 9e cf 1b 61 86 d0 3d 38 e9 7b a1 10 38 ac 5b 1b 8e fd 49 41 66 23 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e6 83 5c 0b 60 99 aa c0 fc 36 13 58 b8 27 24 fa 00 38 e7 bb bd a3 24 3e 66 f4 54 b3 a2 99 69 2b 7a f1 b5 f4 77 e1 87 ae 03 ca ed e2 eb 89 e7 0a 02 0c c2 f7 98 67 5a d5 bc d3 57 3d 0d 55 5b c1 e4 fc 0d fc b7 8f d1 a8 e9 3d
RSN: encrypted key data - hexdump(len=56): e7 bb bd a3 24 3e 66 f4 54 b3 a2 99 69 2b 7a f1 b5 f4 77 e1 87 ae 03 ca ed e2 eb 89 e7 0a 02 0c c2 f7 98 67 5a d5 bc d3 57 3d 0d 55 5b c1 e4 fc 0d fc b7 8f d1 a8 e9 3d
WPA: decrypted EAPOL-Key key data - hexdump(len=48): [REMOVED]
p2p-wlan5-0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
p2p-wlan5-0: WPA: RX message 3 of 4-Way Handshake from 62:21:c0:99:08:b1 (ver=2)
WPA: IE KeyData - hexdump(len=48): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 dd 16 00 0f ac 01 01 00 c9 06 7b c6 46 5e 72 fa 2a 29 66 da 13 80 ea ff dd 00
WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED]
p2p-wlan5-0: WPA: Sending EAPOL-Key 4/4
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): 84 42 d9 78 a4 2b fc 74 d3 ff 3f 6c 53 6c c8 b6
WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 84 42 d9 78 a4 2b fc 74 d3 ff 3f 6c 53 6c c8 b6 00 00
p2p-wlan5-0: WPA: Installing PTK to the driver
wpa_driver_nl80211_set_key: ifindex=6 alg=3 addr=0x1faa158 key_idx=0 set_tx=1 seq_len=6 key_len=16
addr=62:21:c0:99:08:b1
EAPOL: External notification - portValid=1
p2p-wlan5-0: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED]
WPA: Group Key - hexdump(len=16): [REMOVED]
p2p-wlan5-0: WPA: Installing GTK to the driver (keyidx=1 tx=0 len=16)
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
wpa_driver_nl80211_set_key: ifindex=6 alg=3 addr=0x4a6636 key_idx=1 set_tx=0 seq_len=6 key_len=16
broadcast key
p2p-wlan5-0: WPA: Key negotiation completed with 62:21:c0:99:08:b1 [PTK=CCMP GTK=CCMP]
p2p-wlan5-0: Cancelling authentication timeout
Removed BSSID 62:21:c0:99:08:b1 from blacklist
p2p-wlan5-0: State: GROUP_HANDSHAKE -> COMPLETED
p2p-wlan5-0: CTRL-EVENT-CONNECTED - Connection to 62:21:c0:99:08:b1 completed [id=0 id_str=]
wpa_driver_nl80211_set_operstate: operstate 0->1 (UP)
netlink: Operstate: linkmode=-1, operstate=6
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 21 Group Capability 49
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x188
P2P: Attribute 14 length 0
P2P: * Group Info
P2P: Parsing P2P IE
P2P: Attribute 2 length 2
P2P: * Device Capability 21 Group Capability 49
P2P: Attribute 13 length 33
P2P: * Device Info: addr 62:21:c0:99:88:b1 primary device type 10-0050F204-5 device name 'Android_a7ca' config methods 0x188
P2P: Attribute 14 length 0
P2P: * Group Info
P2P: Checking whether group is persistent: group_capab=0x49
P2P: GO Device Address 62:21:c0:99:88:b1
P2P: BSS 62:21:c0:99:08:b1 group_capab=0x49 go_dev_addr=62:21:c0:99:88:b1
P2P-GROUP-STARTED p2p-wlan5-0 client ssid="DIRECT-fC-Android_a7ca" freq=2412 psk=6cdd0179f543dac4eed2aa00b905049640e9ab2f98c87df5d8db7e96616783f3 go_dev_addr=62:21:c0:99:88:b1
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: Supplicant port status: Authorized
nl80211: Set supplicant port authorized for 62:21:c0:99:08:b1
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed successfully
RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
RX ctrl_iface - hexdump_ascii(len=26):
50 32 50 5f 50 45 45 52 20 36 32 3a 32 31 3a 63 P2P_PEER 62:21:c
30 3a 39 39 3a 38 38 3a 62 31 0:99:88:b1
wlan5: Control interface command 'P2P_PEER 62:21:c0:99:88:b1'
RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'p2p-wlan5-0' added
nl80211: if_removed already cleared - ignore event
EAPOL: startWhen --> 0
EAPOL: disable timer tick
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 20 0a 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 30 0a 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 01 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 40 0a 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 02 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
nl80211: Event message available
nl80211: MLME event 59 on wlan5(00:0b:6b:7f:92:56) A1=ff:ff:ff:ff:ff:ff A2=60:21:c0:99:88:b1
nl80211: MLME event frame - hexdump(len=116): 40 00 00 00 ff ff ff ff ff ff 60 21 c0 99 88 b1 ff ff ff ff ff ff 50 0a 00 00 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 2d 1a 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 02 dd 09 00 10 18 02 00 00 00 00 00 dd 1e 00 90 4c 33 20 10 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Frame event
wlan5: Event RX_MGMT (20) received
RX ctrl_iface - hexdump_ascii(len=18):
53 45 54 20 77 69 66 69 5f 64 69 73 70 6c 61 79 SET wifi_display
20 31 1
wlan5: Control interface command 'SET wifi_display 1'
CTRL_IFACE SET 'wifi_display'='1'
WFD: Wi-Fi Display enabled
WFD: Update WFD IE
WFD: WFD IE for Beacon - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for (Re)Association Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for GO Negotiation - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Provision Discovery Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Probe Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Probe Response - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for P2P Invitation - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Provision Discovery Response - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
RX ctrl_iface - hexdump_ascii(len=10):
50 32 50 5f 43 41 4e 43 45 4c P2P_CANCEL
wlan5: Control interface command 'P2P_CANCEL'
P2P: Request to cancel group formation
P2P: Stopping find
P2P: Clear timeout (state=IDLE)
P2P: State IDLE -> IDLE
P2P: Clear timeout (state=IDLE)
nl80211: Disable Probe Request reporting nl_preq=0x1fa68c0
P2P: No ongoing group formation found
RX ctrl_iface - hexdump_ascii(len=28):
50 32 50 5f 47 52 4f 55 50 5f 52 45 4d 4f 56 45 P2P_GROUP_REMOVE
20 70 32 70 2d 77 6c 61 6e 35 2d 30 p2p-wlan5-0
wlan5: Control interface command 'P2P_GROUP_REMOVE p2p-wlan5-0'
p2p-wlan5-0: Request to deauthenticate - bssid=62:21:c0:99:08:b1 pending_bssid=00:00:00:00:00:00 reason=3 state=COMPLETED
wpa_driver_nl80211_deauthenticate(addr=62:21:c0:99:08:b1 reason_code=3)
p2p-wlan5-0: Event DEAUTH (12) received
p2p-wlan5-0: Deauthentication notification
p2p-wlan5-0: * reason 3 (locally generated)
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
p2p-wlan5-0: CTRL-EVENT-DISCONNECTED bssid=62:21:c0:99:08:b1 reason=3 locally_generated=1
p2p-wlan5-0: Auto connect disabled: do not try to re-connect
p2p-wlan5-0: Ignore connection failure indication since interface has been put into disconnected state
p2p-wlan5-0: Disconnect event - remove keys
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x1fa9540 key_idx=0 set_tx=0 seq_len=0 key_len=0
addr=62:21:c0:99:08:b1
p2p-wlan5-0: State: COMPLETED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 1->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
P2P: Set P2P group idle timeout to 10 seconds
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
p2p-wlan5-0: No keys have been configured - skip key clearing
p2p-wlan5-0: State: DISCONNECTED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
P2P-GROUP-REMOVED p2p-wlan5-0 client reason=REQUESTED
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
P2P: Cancelled P2P group idle timeout
P2P: Remove group interface p2p-wlan5-0
p2p-wlan5-0: Removing interface p2p-wlan5-0
p2p-wlan5-0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=DISCONNECTED
p2p-wlan5-0: No keys have been configured - skip key clearing
p2p-wlan5-0: State: DISCONNECTED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
p2p-wlan5-0: No keys have been configured - skip key clearing
EAP: deinitialize previously used EAP method (254, WSC) at EAP deinit
p2p-wlan5-0: BSS: Remove id 0 BSSID 62:21:c0:99:08:b1 SSID 'DIRECT-fC-Android_a7ca' due to wpa_bss_flush
p2p-wlan5-0: Cancelling scan request
p2p-wlan5-0: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
p2p-wlan5-0: Cancelling authentication timeout
netlink: Operstate: linkmode=0, operstate=6
nl80211: Set mode ifindex 6 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x1fa8b10 (mode change)
Control interface directory not empty - leaving it behind
nl80211: wpa_driver_nl80211_if_remove(type=4 ifname=p2p-wlan5-0) ifindex=6
nl80211: Remove interface ifindex=6
nl80211: Ignore event for foreign ifindex 6
nl80211: Ignore event for foreign ifindex 6
nl80211: Ignore event for foreign ifindex 6
nl80211: Ignore event for foreign ifindex 6
nl80211: Ignore dellink event for foreign ifindex 6
nl80211: Event message available
nl80211: Event message available
nl80211: Event message available
nl80211: Event message available
nl80211: Regulatory domain change
wlan5: Event CHANNEL_LIST_CHANGED (31) received
nl80211: Regulatory information - country=US
nl80211: 2402-2472 @ 40 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5250-5330 @ 40 MHz
nl80211: 5490-5600 @ 40 MHz
nl80211: 5650-5710 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
nl80211: Event message available
nl80211: Regulatory domain change
wlan5: Event CHANNEL_LIST_CHANGED (31) received
nl80211: Regulatory information - country=US
nl80211: 2402-2472 @ 40 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5250-5330 @ 40 MHz
nl80211: 5490-5600 @ 40 MHz
nl80211: 5650-5710 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
P2P: Add operating class 81
P2P: Channels - hexdump(len=11): 01 02 03 04 05 06 07 08 09 0a 0b
P2P: Update channel list
RX ctrl_iface - hexdump_ascii(len=10):
50 32 50 5f 4c 49 53 54 45 4e P2P_LISTEN
wlan5: Control interface command 'P2P_LISTEN'
P2P: Stopping find
P2P: Clear timeout (state=IDLE)
P2P: State IDLE -> IDLE
P2P: Going to listen(only) state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Enable Probe Request reporting nl_preq=0x1fa8730
nl80211: Register frame type=0x40 nl_handle=0x1fa8730
nl80211: Register frame match - hexdump(len=0): [NULL]
nl80211: Remain-on-channel cookie 0xffff880406407f00 for freq=2412 MHz duration=5000
P2P: State IDLE -> LISTEN_ONLY
RX ctrl_iface - hexdump_ascii(len=19):
53 45 54 20 70 32 70 5f 67 6f 5f 69 6e 74 65 6e SET p2p_go_inten
74 20 30 t 0
wlan5: Control interface command 'SET p2p_go_intent 0'
CTRL_IFACE SET 'p2p_go_intent'='0'
p2p_go_intent=0
RX ctrl_iface - hexdump_ascii(len=26):
53 45 54 20 70 65 72 73 69 73 74 65 6e 74 5f 72 SET persistent_r
65 63 6f 6e 6e 65 63 74 20 31 econnect 1
wlan5: Control interface command 'SET persistent_reconnect 1'
CTRL_IFACE SET 'persistent_reconnect'='1'
persistent_reconnect=1
RX ctrl_iface - hexdump_ascii(len=24):
53 45 54 20 64 65 76 69 63 65 5f 6e 61 6d 65 20 SET device_name
6b 65 76 69 6e 2d 70 63 kevin-pc
wlan5: Control interface command 'SET device_name kevin-pc'
CTRL_IFACE SET 'device_name'='kevin-pc'
device_name='kevin-pc'
RX ctrl_iface - hexdump_ascii(len=17):
53 45 54 20 6d 6f 64 65 6c 5f 6e 61 6d 65 20 70 SET model_name p
63 c
wlan5: Control interface command 'SET model_name pc'
CTRL_IFACE SET 'model_name'='pc'
model_name='pc'
RX ctrl_iface - hexdump_ascii(len=30):
53 45 54 20 6d 61 6e 75 66 61 63 74 75 72 65 72 SET manufacturer
20 5b 70 6c 61 63 65 68 6f 6c 64 65 72 5d [placeholder]
wlan5: Control interface command 'SET manufacturer [placeholder]'
CTRL_IFACE SET 'manufacturer'='[placeholder]'
manufacturer='[placeholder]'
RX ctrl_iface - hexdump_ascii(len=24):
53 45 54 20 6d 6f 64 65 6c 5f 6e 75 6d 62 65 72 SET model_number
20 34 2e 30 2e 30 2e 30 4.0.0.0
wlan5: Control interface command 'SET model_number 4.0.0.0'
CTRL_IFACE SET 'model_number'='4.0.0.0'
model_number='4.0.0.0'
RX ctrl_iface - hexdump_ascii(len=31):
53 45 54 20 73 65 72 69 61 6c 5f 6e 75 6d 62 65 SET serial_numbe
72 20 5b 70 6c 61 63 65 68 6f 6c 64 65 72 5d r [placeholder]
wlan5: Control interface command 'SET serial_number [placeholder]'
CTRL_IFACE SET 'serial_number'='[placeholder]'
serial_number='[placeholder]'
RX ctrl_iface - hexdump_ascii(len=35):
57 46 44 5f 53 55 42 45 4c 45 4d 5f 53 45 54 20 WFD_SUBELEM_SET
30 30 20 30 30 30 36 30 30 31 31 30 30 30 30 30 00 0006001100000
30 30 30 000
wlan5: Control interface command 'WFD_SUBELEM_SET 00 0006001100000000'
WFD: Set subelement 0
WFD: Update WFD IE
WFD: WFD IE for Beacon - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for (Re)Association Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for GO Negotiation - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Provision Discovery Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Probe Request - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Probe Response - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for P2P Invitation - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
WFD: WFD IE for Provision Discovery Response - hexdump(len=15): dd 0d 50 6f 9a 0a 00 00 06 00 11 00 00 00 00
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=5000 cookie=0xffff880406407f00 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(5,0) on freq=2412 based on callback
P2P: Set timeout (state=LISTEN_ONLY): 5.020000 sec
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=1 freq=2412 channel_type=0 duration=0 cookie=0xffff880406407f00 (match))
wlan5: Event CANCEL_REMAIN_ON_CHANNEL (23) received
P2P: Cancel remain-on-channel callback (p2p_long_listen=3600000 ms pending_action_tx=(nil))
P2P: Driver ended Listen state (freq=2412)
P2P: Continuing long Listen state
P2P: Going to listen(only) state
WPS: * Version (hardcoded 0x10)
WPS: * UUID-E
WPS: * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=25 group=00
P2P: * Device Info
nl80211: Probe Request reporting already on! nl_preq=0x1fa8730
nl80211: Remain-on-channel cookie 0xffff8803acc14f00 for freq=2412 MHz duration=5000
P2P: State LISTEN_ONLY -> LISTEN_ONLY
P2P: Timeout (state=LISTEN_ONLY)
nl80211: Event message available
nl80211: Remain-on-channel event (cancel=0 freq=2412 channel_type=0 duration=5000 cookie=0xffff8803acc14f00 (match))
wlan5: Event REMAIN_ON_CHANNEL (22) received
Off-channel: Send Action callback (without_roc=0 pending_action_tx=(nil))
P2P: Starting Listen timeout(5,0) on freq=2412 based on callback
P2P: Set timeout (state=LISTEN_ONLY): 5.020000 sec
^CP2P: Stopping find
P2P: Clear timeout (state=LISTEN_ONLY)
P2P: State LISTEN_ONLY -> IDLE
P2P: Clear timeout (state=IDLE)
P2P: Clear drv_in_listen (2412)
nl80211: Cancel remain-on-channel with cookie 0xffff8803acc14f00
nl80211: Disable Probe Request reporting nl_preq=0x1fa8730
P2P-DEVICE-LOST p2p_dev_addr=62:21:c0:99:88:b1
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
CTRL_IFACE monitor[0]: 111 - Connection refused
wlan5: Removing interface wlan5
wlan5: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=INACTIVE
wlan5: No keys have been configured - skip key clearing
wlan5: State: INACTIVE -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
nl80211: Set supplicant port unauthorized for 00:00:00:00:00:00
wlan5: No keys have been configured - skip key clearing
wlan5: Cancelling scan request
wlan5: P2P: Station mode scan operation not pending anymore (sta_scan_pending=0 p2p_cb_on_scan_complete=0)
wlan5: Cancelling authentication timeout
netlink: Operstate: linkmode=0, operstate=6
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x1fa52f0 (mode change)
wlan5: CTRL-EVENT-TERMINATING
CTRL_IFACE monitor send - hexdump(len=46): 2f 74 6d 70 2f 73 61 6d 70 6c 65 5f 77 69 64 69 5f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e 74 2e 54 6b 4d 4e 5a 54 2f 73 6f 63 6b 65 74 00
CTRL_IFACE monitor[0]: 111 - Connection refused
CTRL_IFACE wait for attached monitors to receive messages
^ permalink raw reply
* [PATCH V2] vlan priority handling in WMM
From: voncken @ 2013-07-04 7:18 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless
In-Reply-To: <070e01ce762c$24fa5ff0$6eef1fd0$@acksys.fr>
If the VLAN tci is set in skb->vlan_tci use the priority field to determine
the WMM priority.
V2 modifications :
Fix indentation
Use symbolic constant
include the header linux/if_vlan.h
Signed-off-by: cedric Voncken <cedric.voncken@acksys.fr>
---
net/wireless/util.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/net/wireless/util.c b/net/wireless/util.c index
74458b7..13937db 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -10,6 +10,7 @@
#include <net/cfg80211.h>
#include <net/ip.h>
#include <net/dsfield.h>
+#include <linux/if_vlan.h>
#include "core.h"
#include "rdev-ops.h"
@@ -685,6 +686,7 @@ EXPORT_SYMBOL(ieee80211_amsdu_to_8023s);
unsigned int cfg80211_classify8021d(struct sk_buff *skb) {
unsigned int dscp;
+ unsigned char vlan_priority;
/* skb->priority values from 256->263 are magic values to
* directly indicate a specific 802.1d priority. This is used @@
-694,6 +696,10 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb)
if (skb->priority >= 256 && skb->priority <= 263)
return skb->priority - 256;
+ vlan_priority = (skb->vlan_tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
+ if (vlan_priority > 0)
+ return vlan_priority;
+
switch (skb->protocol) {
case htons(ETH_P_IP):
dscp = ipv4_get_dsfield(ip_hdr(skb)) & 0xfc;
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org More majordomo info at
http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org More majordomo info at
http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: Replacement for local->hw.conf.channel
From: Johannes Berg @ 2013-07-04 7:27 UTC (permalink / raw)
To: Ben Greear; +Cc: linux-wireless@vger.kernel.org
In-Reply-To: <51D4BB56.9070401@candelatech.com>
On Wed, 2013-07-03 at 17:01 -0700, Ben Greear wrote:
> I'm trying to port some patches forward to 3.10....
>
> I am trying to find the current channel for a radio. Since
> hw.conf.channel no longer exists, what is the best way to
> go about this?
Well there's hw.conf.chandef.chan now I think, but that can be NULL and
generic mac80211 code must not use it. There's no single current channel
any more, you want vif->chanctx or so.
johannes
^ permalink raw reply
* [PATCH] wil6210: Enable TCP/UDP checksum HW offload
From: Kirshenbaum Erez @ 2013-07-04 6:31 UTC (permalink / raw)
To: qca_vkondrat; +Cc: linux-wireless, Kirshenbaum Erez
Add support for TCP and UDP HW checksum offloading.
RX chain is allways configured for offload mode.
In case of checksum error in RX path the DMA L4 error bit(5)
will be set to 1 and driver will drop the packet.
TX checksum offloading is configrable (ethtool -K).
TX descriptors are configured for checksum offload according
to the SKB protocol type (TCP/UDP, IPV4/6), Upon mismatch drop
the TX packet (checksum required but not TCP/UDP IPV4/6 type).
Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com>
---
drivers/net/wireless/ath/wil6210/netdev.c | 2 +
drivers/net/wireless/ath/wil6210/txrx.c | 77 ++++++++++++++++++++++++++++++-
drivers/net/wireless/ath/wil6210/txrx.h | 20 +++++++-
drivers/net/wireless/ath/wil6210/wmi.c | 7 +++
4 files changed, 103 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 29dd1e5..717178f 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -127,6 +127,8 @@ void *wil_if_alloc(struct device *dev, void __iomem *csr)
ndev->netdev_ops = &wil_netdev_ops;
ndev->ieee80211_ptr = wdev;
+ ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
+ ndev->features |= NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
wdev->netdev = ndev;
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index d240b24..a9ada88 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -18,6 +18,9 @@
#include <net/ieee80211_radiotap.h>
#include <linux/if_arp.h>
#include <linux/moduleparam.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <net/ipv6.h>
#include "wil6210.h"
#include "wmi.h"
@@ -407,6 +410,22 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil,
return NULL;
}
+ /*
+ * L4 IDENT is on when HW calculated checksum, check status
+ * and in case of error drop the packet
+ * higher stack layers will handle retransmission (if required)
+ */
+ if (d->dma.status & RX_DMA_STATUS_L4_IDENT) {
+ /* L4 protocol identified, csum calculated */
+ if ((d->dma.error & RX_DMA_ERROR_L4_ERR) == 0) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else {
+ wil_err(wil, "Incorrect checksum reported\n");
+ kfree_skb(skb);
+ return NULL;
+ }
+ }
+
ds_bits = wil_rxdesc_ds_bits(d);
if (ds_bits == 1) {
/*
@@ -646,6 +665,53 @@ static int wil_tx_desc_map(struct vring_tx_desc *d, dma_addr_t pa, u32 len,
return 0;
}
+static int wil_tx_desc_offload_cksum_set(struct wil6210_priv *wil,
+ struct vring_tx_desc *d,
+ struct sk_buff *skb)
+{
+ int protocol;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return 0;
+
+ switch (skb->protocol) {
+ case cpu_to_be16(ETH_P_IP):
+ protocol = ip_hdr(skb)->protocol;
+ break;
+ case cpu_to_be16(ETH_P_IPV6):
+ protocol = ipv6_hdr(skb)->nexthdr;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (protocol) {
+ case IPPROTO_TCP:
+ d->dma.d0 |= (2 << DMA_CFG_DESC_TX_0_L4_TYPE_POS);
+ /* L4 header len: TCP header length */
+ d->dma.d0 |=
+ (tcp_hdrlen(skb) & DMA_CFG_DESC_TX_0_L4_LENGTH_MSK);
+ break;
+ case IPPROTO_UDP:
+ /* L4 header len: UDP header length */
+ d->dma.d0 |=
+ (sizeof(struct udphdr) & DMA_CFG_DESC_TX_0_L4_LENGTH_MSK);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ d->dma.ip_length = skb_network_header_len(skb);
+ d->dma.b11 = ETH_HLEN; /* MAC header length */
+ d->dma.b11 |= BIT(DMA_CFG_DESC_TX_OFFLOAD_CFG_L3T_IPV4_POS);
+ /* Enable TCP/UDP checksum */
+ d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_POS);
+ /* Calculate pseudo-header */
+ d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_POS);
+
+ return 0;
+}
+
static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
struct sk_buff *skb)
{
@@ -655,7 +721,7 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
u32 swhead = vring->swhead;
int avail = wil_vring_avail_tx(vring);
int nr_frags = skb_shinfo(skb)->nr_frags;
- uint f;
+ uint f = 0;
int vring_index = vring - wil->vring_tx;
uint i = swhead;
dma_addr_t pa;
@@ -686,13 +752,20 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
return -EINVAL;
/* 1-st segment */
wil_tx_desc_map(d, pa, skb_headlen(skb), vring_index);
+ /* Process TCP/UDP checksum offloading */
+ if (wil_tx_desc_offload_cksum_set(wil, d, skb)) {
+ wil_err(wil, "VRING #%d Failed to set cksum, drop packet\n",
+ vring_index);
+ goto dma_error;
+ }
+
d->mac.d[2] |= ((nr_frags + 1) <<
MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS);
if (nr_frags)
*_d = *d;
/* middle segments */
- for (f = 0; f < nr_frags; f++) {
+ for (; f < nr_frags; f++) {
const struct skb_frag_struct *frag =
&skb_shinfo(skb)->frags[f];
int len = skb_frag_size(frag);
diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h
index 859aea6..b382827 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.h
+++ b/drivers/net/wireless/ath/wil6210/txrx.h
@@ -235,7 +235,16 @@ struct vring_tx_mac {
#define DMA_CFG_DESC_TX_0_L4_TYPE_POS 30
#define DMA_CFG_DESC_TX_0_L4_TYPE_LEN 2
-#define DMA_CFG_DESC_TX_0_L4_TYPE_MSK 0xC0000000
+#define DMA_CFG_DESC_TX_0_L4_TYPE_MSK 0xC0000000 /* L4 type: 0-UDP, 2-TCP */
+
+
+#define DMA_CFG_DESC_TX_OFFLOAD_CFG_MAC_LEN_POS 0
+#define DMA_CFG_DESC_TX_OFFLOAD_CFG_MAC_LEN_LEN 7
+#define DMA_CFG_DESC_TX_OFFLOAD_CFG_MAC_LEN_MSK 0x7F /* MAC hdr len */
+
+#define DMA_CFG_DESC_TX_OFFLOAD_CFG_L3T_IPV4_POS 7
+#define DMA_CFG_DESC_TX_OFFLOAD_CFG_L3T_IPV4_LEN 1
+#define DMA_CFG_DESC_TX_OFFLOAD_CFG_L3T_IPV4_MSK 0x80 /* 1-IPv4, 0-IPv6 */
#define TX_DMA_STATUS_DU BIT(0)
@@ -334,8 +343,17 @@ struct vring_rx_mac {
#define RX_DMA_D0_CMD_DMA_IT BIT(10)
+/* Error field, offload bits */
+#define RX_DMA_ERROR_L3_ERR BIT(4)
+#define RX_DMA_ERROR_L4_ERR BIT(5)
+
+
+/* Status field */
#define RX_DMA_STATUS_DU BIT(0)
#define RX_DMA_STATUS_ERROR BIT(2)
+
+#define RX_DMA_STATUS_L3_IDENT BIT(4)
+#define RX_DMA_STATUS_L4_IDENT BIT(5)
#define RX_DMA_STATUS_PHY_INFO BIT(6)
struct vring_rx_dma {
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index dc8059a..a0875a7 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -920,6 +920,13 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring)
cmd.sniffer_cfg.phy_support =
cpu_to_le32((wil->monitor_flags & MONITOR_FLAG_CONTROL)
? WMI_SNIFFER_CP : WMI_SNIFFER_DP);
+ } else {
+ /*
+ * Initialize offload (in non-sniffer mode).
+ * Linux IP stack always calculates IP checksum
+ * HW always calculate TCP/UDP checksum
+ */
+ cmd.l3_l4_ctrl |= (1 << L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS);
}
/* typical time for secure PCP is 840ms */
rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd),
--
1.7.11.7
^ permalink raw reply related
* [PATCH] ath9k: Fix RTS threshold
From: Sujith Manoharan @ 2013-07-04 7:29 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Currently, RTS threshold is not handled for HT. Handle
user-specified threshold values for both aggregated
and unaggregated frames. Use the wiphy's threshold
parameter for now, it can be made per-VIF later on.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/xmit.c | 36 +++++++++++++++++++++++++++++++----
1 file changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 9279927..52cd521 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1023,7 +1023,7 @@ void ath_update_max_aggr_framelen(struct ath_softc *sc, int queue, int txop)
}
static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
- struct ath_tx_info *info, int len)
+ struct ath_tx_info *info, int len, bool rts)
{
struct ath_hw *ah = sc->sc_ah;
struct sk_buff *skb;
@@ -1032,6 +1032,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
const struct ieee80211_rate *rate;
struct ieee80211_hdr *hdr;
struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu);
+ u32 rts_thresh = sc->hw->wiphy->rts_threshold;
int i;
u8 rix = 0;
@@ -1054,7 +1055,17 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
rix = rates[i].idx;
info->rates[i].Tries = rates[i].count;
- if (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ /*
+ * Handle RTS threshold for unaggregated HT frames.
+ */
+ if (bf_isampdu(bf) && !bf_isaggr(bf) &&
+ (rates[i].flags & IEEE80211_TX_RC_MCS) &&
+ unlikely(rts_thresh != (u32) -1)) {
+ if (!rts_thresh || (len > rts_thresh))
+ rts = true;
+ }
+
+ if (rts || rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
info->rates[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
info->flags |= ATH9K_TXDESC_RTSENA;
} else if (rates[i].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
@@ -1147,6 +1158,8 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf,
struct ath_hw *ah = sc->sc_ah;
struct ath_buf *bf_first = NULL;
struct ath_tx_info info;
+ u32 rts_thresh = sc->hw->wiphy->rts_threshold;
+ bool rts = false;
memset(&info, 0, sizeof(info));
info.is_first = true;
@@ -1183,7 +1196,22 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf,
info.flags |= (u32) bf->bf_state.bfs_paprd <<
ATH9K_TXDESC_PAPRD_S;
- ath_buf_set_rate(sc, bf, &info, len);
+ /*
+ * mac80211 doesn't handle RTS threshold for HT because
+ * the decision has to be taken based on AMPDU length
+ * and aggregation is done entirely inside ath9k.
+ * Set the RTS/CTS flag for the first subframe based
+ * on the threshold.
+ */
+ if (aggr && (bf == bf_first) &&
+ unlikely(rts_thresh != (u32) -1)) {
+ /*
+ * "len" is the size of the entire AMPDU.
+ */
+ if (!rts_thresh || (len > rts_thresh))
+ rts = true;
+ }
+ ath_buf_set_rate(sc, bf, &info, len, rts);
}
info.buf_addr[0] = bf->bf_buf_addr;
@@ -2168,7 +2196,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
bf->bf_lastbf = bf;
ath_set_rates(vif, NULL, bf);
- ath_buf_set_rate(sc, bf, &info, fi->framelen);
+ ath_buf_set_rate(sc, bf, &info, fi->framelen, false);
duration += info.rates[0].PktDuration;
if (bf_tail)
bf_tail->bf_next = bf;
--
1.8.3.2
^ permalink raw reply related
* Re: [PATCH V2] vlan priority handling in WMM
From: Johannes Berg @ 2013-07-04 7:46 UTC (permalink / raw)
To: voncken; +Cc: linux-wireless
In-Reply-To: <00e901ce7886$ae44d360$0ace7a20$@acksys.fr>
On Thu, 2013-07-04 at 09:18 +0200, voncken wrote:
> If the VLAN tci is set in skb->vlan_tci use the priority field to determine
> the WMM priority.
Pinging me and resending your patch isn't going to make it more likely
that I apply it. We're in the merge window, so naturally patch
application is stalled.
johannes
^ permalink raw reply
* RE: [PATCH V2] vlan priority handling in WMM
From: voncken @ 2013-07-04 7:59 UTC (permalink / raw)
To: 'Johannes Berg'; +Cc: linux-wireless
In-Reply-To: <1372923998.8235.1.camel@jlt4.sipsolutions.net>
Sorry but I have some problems with my mail server, and actually, I have a lot of mail not sent. So I was not sure you received my message.
I waiting the end of merge windows
Cedric
-----Message d'origine-----
De : Johannes Berg [mailto:johannes@sipsolutions.net]
Envoyé : jeudi 4 juillet 2013 09:47
À : voncken
Cc : linux-wireless@vger.kernel.org
Objet : Re: [PATCH V2] vlan priority handling in WMM
On Thu, 2013-07-04 at 09:18 +0200, voncken wrote:
> If the VLAN tci is set in skb->vlan_tci use the priority field to
> determine the WMM priority.
Pinging me and resending your patch isn't going to make it more likely that I apply it. We're in the merge window, so naturally patch application is stalled.
johannes
^ permalink raw reply
* Re: [PATCH] brcmfmac: Turn off ARP offloading when configured for AP.
From: Arend van Spriel @ 2013-07-04 8:27 UTC (permalink / raw)
To: Kamal Mostafa
Cc: Rafał Miłecki, Greg KH, stable, linux-wireless,
Hante Meuleman, John W. Linville
In-Reply-To: <1372892769.12249.259.camel@fourier>
On 07/04/2013 01:06 AM, Kamal Mostafa wrote:
> On Wed, 2013-07-03 at 06:54 +0200, Rafał Miłecki wrote:
>> 2013/7/2 Arend van Spriel <arend@broadcom.com>:
>>> Hi Greg,
>>>
>>> Forgot to ask, but it seems like Canonical is maintaining additional stable
>>> kernel branches. I guess I should contact them for those kernel versions (if
>>> I care), right?
>>
>> They track Greg's stables to pick up the patches. Know from my own
>> experience, I didn't have to ping anyone :)
>>
>
> Yes, we're picking up cc: stable patches automatically when they apply
> to the 3.8.y.z and 3.5.y.z "extended stable" branches[0], but we
> certainly appreciate specific backports for those versions when they
> don't apply cleanly.
Thanks, Kamal
I send a backport for 3.9 and tried it on 3.8, but it does not apply so
I would have to backport it. I will have a look and find out where to
send them. Probably that info is on the referred wiki.
Regards,
Arend
> -Kamal
>
> [0] https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable
>
>
^ permalink raw reply
* Re: [PATCH] brcm: add brcmfmac sdio firmware for bcm43241
From: Arend van Spriel @ 2013-07-04 10:34 UTC (permalink / raw)
To: Ben Hutchings; +Cc: Linux Wireless, Franky Lin, David Woodhouse, Stephen Warren
In-Reply-To: <1372904558.22888.50.camel@deadeye.wl.decadent.org.uk>
On 07/04/2013 04:22 AM, Ben Hutchings wrote:
> On Wed, 2013-05-29 at 15:13 +0200, Arend van Spriel wrote:
>> From: Franky Lin <frankyl@broadcom.com>
>>
>> Add missing firmware file for the BCM43241 SDIO device. The firmware
>> version is v6.10.170.4
>>
>> Reported-by: Alex Courbot <acourbot@nvidia.com>
>> Signed-off-by: Franky Lin <frankyl@broadcom.com>
>> Signed-off-by: Arend van Spriel <arend@broadcom.com>
>> ---
>> Hi Ben,
>>
>> Somehow this firmware got forgotten although brcmfmac has support for
>> the device for a while now.
>>
>> Regards,
>> Arend
>> ---
>> WHENCE | 1 +
>> brcm/brcmfmac43241.bin | Bin 0 -> 414238 bytes
>> 2 files changed, 1 insertion(+)
>> create mode 100644 brcm/brcmfmac43241.bin
>>
>> diff --git a/WHENCE b/WHENCE
>> index ef64612..5eca1d0 100644
>> --- a/WHENCE
>> +++ b/WHENCE
>> @@ -1652,6 +1652,7 @@ Driver: brcmfmac - Broadcom 802.11n fullmac wireless LAN driver.
>>
>> File: brcm/bcm4329-fullmac-4.bin
>> File: brcm/brcmfmac43236b.bin
>> +File: brcm/brcmfmac43241.bin
>> File: brcm/brcmfmac4329.bin
>> File: brcm/brcmfmac4330.bin
>> File: brcm/brcmfmac4334.bin
> [...]
>
> Unless you're doing something very clever with macros, I don't believe
> you've posted any driver code that uses this file... or several of the
> others. The current driver in net-next (I don't know what you've sent
> to Nvidia) appears to request only these files:
Hi, Ben
Nvidia was just using the upstream brcmfmac driver. The "clever" thing
we are doing for the SDIO part of our brcmfmac driver is that the
firmware filename requested by the driver is always brcmfmac-sdio.bin.
We explain on wireless.kernel.org that people should link/copy the
firmware file for their device to brcmfmac-sdio.bin and get
brcmfmac-sdio.txt from their board supplier as it is very board specific
initialization data. I understand this complicates your job in finding
out where the firmware is actually used and I apologize.
> - brcm/brcmfmac43143.bin
> - brcm/brcmfmac43236b.bin
> - brcm/brcmfmac43242a.bin
These are used by USB part of brcmfmac and
> - brcm/brcmfmac-sdio.bin
> - brcm/brcmfmac-sdio.txt
>
> Looking through the git history, I can see that various other names have
> been used:
>
> - brcm/bcm4329-fullmac-4.bin (renamed to brcm/brcmfmac-sdio.bin)
> - brcm/bcm4329-fullmac-4.txt (renamed to brcm/brcmfmac-sdio.txt)
> - brcm/brcmfmac-usb.bin (renamed to brcm/brcmfmac43236b.bin)
> - brcm/brcmfmac.bin (renamed to brcm/brcmfmac-sdio.bin)
> - brcm/brcmfmac.txt (renamed to brcm/brcmfmac-sdio.txt)
>
> So I think, before this patch is applied, you owe me and David patches
> to:
>
> 1. Add brcm/brcmfmac43143.bin, brcm/brcmfmac43242a.bin and
> brcm/brcmfmac-sdio.txt.
The 43143 and 43242 bin files will be submitted, but these firmwares
have not yet been released. I have to wait for a green light on that.
> 2. Rename brcm/bcm4329-fullmac-4.bin to brcm/brcmfmac-sdio.bin.
That file is there for brcmfmac in older kernels (< v3.3) as the
replacement brcmfmac4329.bin does not work with brcmfmac in those older
kernels.
> 3. Add symlinks from all the old names to the new names. (As
> linux-firmware should support old in-tree drivers indefinitely.)
I will look into this to see what names were used by brcmfmac since it
was mainlined.
> and you owe linux-wireless some driver patches.
>
> linux-firmware.git is not the appropriate place to send firmware used
> only by out-of-tree code, and any firmware blob that has never been
> referenced by in-tree code is subject to removal.
I am aware and none of the firmwares we released are for out-of-tree
code. We actually got feedback that using the same firmware filename for
multiple devices was not very user-friendly. Therefore we will get rid
of this quirky approach in the next kernel and the firmware files in
linux-firmware will be listed in brcmfmac using the MODULE_FIRMWARE() macro.
Regards,
Arend
^ permalink raw reply
* configuring Generic Information Elements (genie)
From: Dennis New @ 2013-07-04 13:23 UTC (permalink / raw)
To: linux-wireless
Is there a way to configure (i.e. disable) the "generic information
elements" that are listed, for example, by "iwlist genie" ?
I have an open ad-hoc network, and whereas one of my wifi cards shows
"no generic IE (Operation not supported)", and works fine, my other
card shows:
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
which seems to be causing problems on some (probably buggy) machines
that incorrectly think it's using WPA2.
^ permalink raw reply
* Re: [PATCH v3 2/8] wlcore: set irq_flags in the board files instead of hiding behind a quirk
From: Luciano Coelho @ 2013-07-04 14:21 UTC (permalink / raw)
To: Javier Martinez Canillas
Cc: linux-wireless, tony, nsekhar, mturquette, mark.rutland, balbi,
grant.likely, rob.herring, devicetree-discuss, linux-doc,
linux-kernel, linux-omap, linux-arm-kernel, nm
In-Reply-To: <CAAwP0s3xkqUGnGvojfpyQq97qUmKCqY3BD4RyK1_uuX=pNy91g@mail.gmail.com>
On Wed, 2013-07-03 at 17:12 +0200, Javier Martinez Canillas wrote:
> On Wed, Jul 3, 2013 at 4:15 PM, Luciano Coelho <coelho@ti.com> wrote:
> > On Wed, 2013-07-03 at 17:03 +0300, Luciano Coelho wrote:
> >> The platform_quirk element in the platform data was used to change the
> >> way the IRQ is triggered. When set, the EDGE_IRQ quirk would change
> >> the irqflags used and treat edge trigger differently from the rest.
> >>
> >> Instead of hiding this irq flag setting behind the quirk, have the
> >> board files set the flags during initialization. This will be more
> >> meaningful than driver-specific quirks when we switch to DT.
> >>
> >> Additionally, fix missing gpio_request() calls in the boarding files
> >> (so that setting the flags actually works).
> >>
> >> Cc: Tony Lindgren <tony@atomide.com>
> >> Cc: Sekhar Nori <nsekhar@ti.com>
> >> Signed-off-by: Luciano Coelho <coelho@ti.com>
> >> ---
> >
> > [...]
> >
> >> @@ -5928,16 +5927,21 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
> >> wlcore_adjust_conf(wl);
> >>
> >> wl->irq = platform_get_irq(pdev, 0);
> >> - wl->platform_quirks = pdata->platform_quirks;
> >> wl->if_ops = pdev_data->if_ops;
> >>
> >> - if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
> >> - irqflags = IRQF_TRIGGER_RISING;
> >> - else
> >> - irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
> >> + irq_data = irq_get_irq_data(wl->irq);
> >> + if (!irq_data) {
> >> + wl1271_error("couldn't get irq data for irq %d\n", wl->irq);
> >> + ret = -EINVAL;
> >> + goto out_free_nvs;
> >> + }
> >> +
> >> + wl->irq_flags = irqd_get_trigger_type(irq_data);
> >
> > BTW, there seems to be a patch on its way to make reading the flags
> > easier (ie. no need to get the irq_data first):
> >
> > http://mid.gmane.org/1367945288-5625-1-git-send-email-javier@dowhile0.org
> >
> > I'm not sure if this is going to be taken in, but if it does, it would
> > be nice to change the code here to use the new irq_get_trigger_type()
> > function.
> That patch has been already merged in Linus tree as commit 1f6236bf
> ("genirq: Add irq_get_trigger_type() to get IRQ flags").
>
> So yes, it would be better if you can use irq_get_trigger_type()
> instead calling irq_get_irq_data() + irqd_get_trigger_type().
That's great, thanks! I'll make this change as soon as I get your patch
into my tree (ie. after the merge window closes).
--
Luca.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox