* [PATCH 05/13] wlcore: fwlog dynamic mem_block control
From: Eliad Peller @ 2013-09-09 9:24 UTC (permalink / raw)
To: Luciano Coelho; +Cc: linux-wireless
In-Reply-To: <1378718684-14430-1-git-send-email-eliad@wizery.com>
From: Ido Reis <idor@ti.com>
number of fwlog mem_blocks can be configured using module param.
this is a fw debug feature: in case a large fw log data is busrted during
a short period of time, the memory get filled and data is lost.
this allows us to dynamicly set the fw log mem_block usage, although
configuring more mem_block for logger comes at the expense of TP.
Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Ido Reis <idor@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/conf.h | 5 ++++-
drivers/net/wireless/ti/wlcore/main.c | 16 ++++++++++++++++
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h
index 2b96ff8..40995c4 100644
--- a/drivers/net/wireless/ti/wlcore/conf.h
+++ b/drivers/net/wireless/ti/wlcore/conf.h
@@ -1274,6 +1274,9 @@ struct conf_rx_streaming_settings {
u8 always;
} __packed;
+#define CONF_FWLOG_MIN_MEM_BLOCKS 2
+#define CONF_FWLOG_MAX_MEM_BLOCKS 16
+
struct conf_fwlog {
/* Continuous or on-demand */
u8 mode;
@@ -1281,7 +1284,7 @@ struct conf_fwlog {
/*
* Number of memory blocks dedicated for the FW logger
*
- * Range: 1-3, or 0 to disable the FW logger
+ * Range: 2-16, or 0 to disable the FW logger
*/
u8 mem_blocks;
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index dbf3315..ebb1076 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -44,6 +44,7 @@
#define WL1271_BOOT_RETRIES 3
static char *fwlog_param;
+static int fwlog_mem_blocks = -1;
static int bug_on_recovery = -1;
static int no_recovery = -1;
@@ -291,6 +292,18 @@ static void wlcore_adjust_conf(struct wl1271 *wl)
{
/* Adjust settings according to optional module parameters */
+ /* Firmware Logger params */
+ if (fwlog_mem_blocks != -1) {
+ if (fwlog_mem_blocks >= CONF_FWLOG_MIN_MEM_BLOCKS &&
+ fwlog_mem_blocks <= CONF_FWLOG_MAX_MEM_BLOCKS) {
+ wl->conf.fwlog.mem_blocks = fwlog_mem_blocks;
+ } else {
+ wl1271_error(
+ "Illegal fwlog_mem_blocks=%d using default %d",
+ fwlog_mem_blocks, wl->conf.fwlog.mem_blocks);
+ }
+ }
+
if (fwlog_param) {
if (!strcmp(fwlog_param, "continuous")) {
wl->conf.fwlog.mode = WL12XX_FWLOG_CONTINUOUS;
@@ -6161,6 +6174,9 @@ module_param_named(fwlog, fwlog_param, charp, 0);
MODULE_PARM_DESC(fwlog,
"FW logger options: continuous, ondemand, dbgpins or disable");
+module_param(fwlog_mem_blocks, int, S_IRUSR | S_IWUSR);
+MODULE_PARM_DESC(fwlog_mem_blocks, "fwlog mem_blocks");
+
module_param(bug_on_recovery, int, S_IRUSR | S_IWUSR);
MODULE_PARM_DESC(bug_on_recovery, "BUG() on fw recovery");
--
1.8.3.rc1.35.g9b79519
^ permalink raw reply related
* [PATCH 04/13] wlcore: fix interrogate command length
From: Eliad Peller @ 2013-09-09 9:24 UTC (permalink / raw)
To: Luciano Coelho; +Cc: linux-wireless
In-Reply-To: <1378718684-14430-1-git-send-email-eliad@wizery.com>
From: Igal Chernobelsky <igalc@ti.com>
Change interrogate command prototype to have command size
and returned buffer length.
This fixes the issue when command parameters are needed to
be passed to FW in addition to acx header as in the case with
get RSSI command, where role_id has to be passed.
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/acx.c | 10 ++++++----
drivers/net/wireless/ti/wlcore/cmd.c | 9 +++++----
drivers/net/wireless/ti/wlcore/cmd.h | 3 ++-
drivers/net/wireless/ti/wlcore/testmode.c | 3 ++-
4 files changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c
index 7a970cd..ec83675 100644
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -162,7 +162,8 @@ int wl1271_acx_mem_map(struct wl1271 *wl, struct acx_header *mem_map,
wl1271_debug(DEBUG_ACX, "acx mem map");
- ret = wl1271_cmd_interrogate(wl, ACX_MEM_MAP, mem_map, len);
+ ret = wl1271_cmd_interrogate(wl, ACX_MEM_MAP, mem_map,
+ sizeof(struct acx_header), len);
if (ret < 0)
return ret;
@@ -722,6 +723,7 @@ int wl1271_acx_statistics(struct wl1271 *wl, void *stats)
wl1271_debug(DEBUG_ACX, "acx statistics");
ret = wl1271_cmd_interrogate(wl, ACX_STATISTICS, stats,
+ sizeof(struct acx_header),
wl->stats.fw_stats_len);
if (ret < 0) {
wl1271_warning("acx statistics failed: %d", ret);
@@ -1470,8 +1472,8 @@ int wl12xx_acx_tsf_info(struct wl1271 *wl, struct wl12xx_vif *wlvif,
tsf_info->role_id = wlvif->role_id;
- ret = wl1271_cmd_interrogate(wl, ACX_TSF_INFO,
- tsf_info, sizeof(*tsf_info));
+ ret = wl1271_cmd_interrogate(wl, ACX_TSF_INFO, tsf_info,
+ sizeof(struct acx_header), sizeof(*tsf_info));
if (ret < 0) {
wl1271_warning("acx tsf info interrogate failed");
goto out;
@@ -1752,7 +1754,7 @@ int wlcore_acx_average_rssi(struct wl1271 *wl, struct wl12xx_vif *wlvif,
acx->role_id = wlvif->role_id;
ret = wl1271_cmd_interrogate(wl, ACX_ROAMING_STATISTICS_TBL,
- acx, sizeof(*acx));
+ acx, sizeof(*acx), sizeof(*acx));
if (ret < 0) {
wl1271_warning("acx roaming statistics failed: %d", ret);
ret = -ENOMEM;
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 1cb3296..f6a3d7d 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -845,7 +845,8 @@ EXPORT_SYMBOL_GPL(wl1271_cmd_test);
* @buf: buffer for the response, including all headers, must work with dma
* @len: length of buf
*/
-int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len)
+int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf,
+ size_t cmd_len, size_t res_len)
{
struct acx_header *acx = buf;
int ret;
@@ -854,10 +855,10 @@ int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len)
acx->id = cpu_to_le16(id);
- /* payload length, does not include any headers */
- acx->len = cpu_to_le16(len - sizeof(*acx));
+ /* response payload length, does not include any headers */
+ acx->len = cpu_to_le16(res_len - sizeof(*acx));
- ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx), len);
+ ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, cmd_len, res_len);
if (ret < 0)
wl1271_error("INTERROGATE command failed");
diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h
index fd34123..323d4a8 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -45,7 +45,8 @@ int wl12xx_start_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif,
enum ieee80211_band band, int channel);
int wl12xx_stop_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif);
int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
-int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
+int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf,
+ size_t cmd_len, size_t res_len);
int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wlcore_cmd_configure_failsafe(struct wl1271 *wl, u16 id, void *buf,
size_t len, unsigned long valid_rets);
diff --git a/drivers/net/wireless/ti/wlcore/testmode.c b/drivers/net/wireless/ti/wlcore/testmode.c
index a3b7d95..ddad58f 100644
--- a/drivers/net/wireless/ti/wlcore/testmode.c
+++ b/drivers/net/wireless/ti/wlcore/testmode.c
@@ -179,7 +179,8 @@ static int wl1271_tm_cmd_interrogate(struct wl1271 *wl, struct nlattr *tb[])
goto out_sleep;
}
- ret = wl1271_cmd_interrogate(wl, ie_id, cmd, sizeof(*cmd));
+ ret = wl1271_cmd_interrogate(wl, ie_id, cmd,
+ sizeof(struct acx_header), sizeof(*cmd));
if (ret < 0) {
wl1271_warning("testmode cmd interrogate failed: %d", ret);
goto out_free;
--
1.8.3.rc1.35.g9b79519
^ permalink raw reply related
* [PATCH 03/13] wlcore: add ap_event_mask
From: Eliad Peller @ 2013-09-09 9:24 UTC (permalink / raw)
To: Luciano Coelho; +Cc: linux-wireless
In-Reply-To: <1378718684-14430-1-git-send-email-eliad@wizery.com>
Add new ap_event_mask field, to indicate events that
should be unmasked only when there's an ap interface.
This is done in order to avoid spurious wakeups
when we don't care about the incoming event anyway.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl12xx/main.c | 3 ++-
drivers/net/wireless/ti/wl18xx/main.c | 3 ++-
drivers/net/wireless/ti/wlcore/event.c | 1 +
drivers/net/wireless/ti/wlcore/init.c | 6 ++++++
drivers/net/wireless/ti/wlcore/main.c | 6 ++++++
drivers/net/wireless/ti/wlcore/wlcore.h | 2 ++
6 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 1c627da..f147e32 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1262,9 +1262,10 @@ static int wl12xx_boot(struct wl1271 *wl)
BA_SESSION_RX_CONSTRAINT_EVENT_ID |
REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID |
INACTIVE_STA_EVENT_ID |
- MAX_TX_RETRY_EVENT_ID |
CHANNEL_SWITCH_COMPLETE_EVENT_ID;
+ wl->ap_event_mask = MAX_TX_RETRY_EVENT_ID;
+
ret = wlcore_boot_run_firmware(wl);
if (ret < 0)
goto out;
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 7302308..a02e0bf 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -988,10 +988,11 @@ static int wl18xx_boot(struct wl1271 *wl)
BA_SESSION_RX_CONSTRAINT_EVENT_ID |
REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID |
INACTIVE_STA_EVENT_ID |
- MAX_TX_FAILURE_EVENT_ID |
CHANNEL_SWITCH_COMPLETE_EVENT_ID |
DFS_CHANNELS_CONFIG_COMPLETE_EVENT;
+ wl->ap_event_mask = MAX_TX_FAILURE_EVENT_ID;
+
ret = wlcore_boot_run_firmware(wl);
if (ret < 0)
goto out;
diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c
index 67f6168..8d3b349 100644
--- a/drivers/net/wireless/ti/wlcore/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -266,6 +266,7 @@ int wl1271_event_unmask(struct wl1271 *wl)
{
int ret;
+ wl1271_debug(DEBUG_EVENT, "unmasking event_mask 0x%x", wl->event_mask);
ret = wl1271_acx_event_mbox_mask(wl, ~(wl->event_mask));
if (ret < 0)
return ret;
diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c
index 5c6f11e..7699f9d 100644
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -571,6 +571,12 @@ int wl1271_init_vif_specific(struct wl1271 *wl, struct ieee80211_vif *vif)
ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
if (ret < 0)
return ret;
+
+ /* unmask ap events */
+ wl->event_mask |= wl->ap_event_mask;
+ ret = wl1271_event_unmask(wl);
+ if (ret < 0)
+ return ret;
/* first STA, no APs */
} else if (wl->sta_count == 0 && wl->ap_count == 0 && !is_ap) {
u8 sta_auth = wl->conf.conn.sta_sleep_auth;
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index a537483..dbf3315 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2623,6 +2623,12 @@ deinit:
!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags))
goto unlock;
+ if (wl->ap_count == 0 && is_ap) {
+ /* mask ap events */
+ wl->event_mask &= ~wl->ap_event_mask;
+ wl1271_event_unmask(wl);
+ }
+
if (wl->ap_count == 0 && is_ap && wl->sta_count) {
u8 sta_auth = wl->conf.conn.sta_sleep_auth;
/* Configure for power according to debugfs */
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 54ce5d5..f927222 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -307,6 +307,8 @@ struct wl1271 {
/* The mbox event mask */
u32 event_mask;
+ /* events to unmask only when ap interface is up */
+ u32 ap_event_mask;
/* Mailbox pointers */
u32 mbox_size;
--
1.8.3.rc1.35.g9b79519
^ permalink raw reply related
* [PATCH 02/13] wlcore: print active channel in the driver_state
From: Eliad Peller @ 2013-09-09 9:24 UTC (permalink / raw)
To: Luciano Coelho; +Cc: linux-wireless
In-Reply-To: <1378718684-14430-1-git-send-email-eliad@wizery.com>
From: Victor Goldenshtein <victorg@ti.com>
Print current active channel/s and a role type for
that channel in the driver_state debugfs.
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/debugfs.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c
index e17630c..89893c7 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -437,6 +437,7 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf,
int res = 0;
ssize_t ret;
char *buf;
+ struct wl12xx_vif *wlvif;
#define DRIVER_STATE_BUF_LEN 1024
@@ -450,12 +451,28 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf,
(res += scnprintf(buf + res, DRIVER_STATE_BUF_LEN - res,\
#x " = " fmt "\n", wl->x))
+#define DRIVER_STATE_PRINT_GENERIC(x, fmt, args...) \
+ (res += scnprintf(buf + res, DRIVER_STATE_BUF_LEN - res,\
+ #x " = " fmt "\n", args))
+
#define DRIVER_STATE_PRINT_LONG(x) DRIVER_STATE_PRINT(x, "%ld")
#define DRIVER_STATE_PRINT_INT(x) DRIVER_STATE_PRINT(x, "%d")
#define DRIVER_STATE_PRINT_STR(x) DRIVER_STATE_PRINT(x, "%s")
#define DRIVER_STATE_PRINT_LHEX(x) DRIVER_STATE_PRINT(x, "0x%lx")
#define DRIVER_STATE_PRINT_HEX(x) DRIVER_STATE_PRINT(x, "0x%x")
+ wl12xx_for_each_wlvif_sta(wl, wlvif) {
+ if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags))
+ continue;
+
+ DRIVER_STATE_PRINT_GENERIC(channel, "%d (%s)", wlvif->channel,
+ wlvif->p2p ? "P2P-CL" : "STA");
+ }
+
+ wl12xx_for_each_wlvif_ap(wl, wlvif)
+ DRIVER_STATE_PRINT_GENERIC(channel, "%d (%s)", wlvif->channel,
+ wlvif->p2p ? "P2P-GO" : "AP");
+
DRIVER_STATE_PRINT_INT(tx_blocks_available);
DRIVER_STATE_PRINT_INT(tx_allocated_blocks);
DRIVER_STATE_PRINT_INT(tx_allocated_pkts[0]);
@@ -474,7 +491,6 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf,
DRIVER_STATE_PRINT_INT(tx_blocks_freed);
DRIVER_STATE_PRINT_INT(rx_counter);
DRIVER_STATE_PRINT_INT(state);
- DRIVER_STATE_PRINT_INT(channel);
DRIVER_STATE_PRINT_INT(band);
DRIVER_STATE_PRINT_INT(power_level);
DRIVER_STATE_PRINT_INT(sg_enabled);
--
1.8.3.rc1.35.g9b79519
^ permalink raw reply related
* [PATCH 01/13] wl18xx: default config alignment with phy defaults
From: Eliad Peller @ 2013-09-09 9:24 UTC (permalink / raw)
To: Luciano Coelho; +Cc: linux-wireless
From: Igal Chernobelsky <igalc@ti.com>
Driver default config is aligned with phy default parameters.
Now that RDL1_3 has 2 antennas defined by default we need to explicitly
define ht.mode to HT_MODE_WIDE to have SISO40 as default.
Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl18xx/main.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index aef0c91..7302308 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -505,7 +505,7 @@ static struct wlcore_conf wl18xx_conf = {
static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.ht = {
- .mode = HT_MODE_DEFAULT,
+ .mode = HT_MODE_WIDE,
},
.phy = {
.phy_standalone = 0x00,
@@ -516,7 +516,7 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.auto_detect = 0x00,
.dedicated_fem = FEM_NONE,
.low_band_component = COMPONENT_3_WAY_SWITCH,
- .low_band_component_type = 0x04,
+ .low_band_component_type = 0x05,
.high_band_component = COMPONENT_2_WAY_SWITCH,
.high_band_component_type = 0x09,
.tcxo_ldo_voltage = 0x00,
@@ -556,15 +556,15 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
.per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff },
.psat = 0,
- .low_power_val = 0x08,
- .med_power_val = 0x12,
- .high_power_val = 0x18,
- .low_power_val_2nd = 0x05,
- .med_power_val_2nd = 0x0a,
- .high_power_val_2nd = 0x14,
.external_pa_dc2dc = 0,
.number_of_assembled_ant2_4 = 2,
.number_of_assembled_ant5 = 1,
+ .low_power_val = 0xff,
+ .med_power_val = 0xff,
+ .high_power_val = 0xff,
+ .low_power_val_2nd = 0xff,
+ .med_power_val_2nd = 0xff,
+ .high_power_val_2nd = 0xff,
.tx_rf_margin = 1,
},
};
--
1.8.3.rc1.35.g9b79519
^ permalink raw reply related
* Re: [PATCH] ath10k: prevent CE from looping indefinitely
From: Kalle Valo @ 2013-09-09 8:00 UTC (permalink / raw)
To: Michal Kazior; +Cc: ath10k, linux-wireless
In-Reply-To: <1378213798-24769-1-git-send-email-michal.kazior@tieto.com>
Michal Kazior <michal.kazior@tieto.com> writes:
> The double while() could end up running forever.
> Inner while() would complete very fast. However
> the completion processing could take enough time
> for more completions to flow in. In that case the
> outer while() would not terminate and run again,
> and again. This could happen especially on a slow
> host system.
>
> This could lead to a system freeze during heavy
> traffic. Note: this doesn't solve all known
> starvation issues yet.
>
> Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Applied, thanks.
--
Kalle Valo
^ permalink raw reply
* regulatory will stuck when cfg80211 is built-in
From: Eugene Krasnikov @ 2013-09-09 6:16 UTC (permalink / raw)
To: linux-wireless
Hi All,
There is a problem with regulatory part of cfg80211 when cfg80211 is
built-in the kernel. On regulatory init cfg80211 will try to notify
user space about changing current domain to world regulatory but at
that time user space is not up and running yet and uevent message will
be lost. So what will happen is that cfg80211 will wait for the
response from user space and all requests to set current regulatory
will be dropped with the following error: “Pending regulatory request,
waiting for it to be processed...”.
I assume the problem is known so is there any information on wiki how
to fix this in official way? Of course one option is to have cfg80211
as a module but is it really the right wait to go?
--
Best regards,
Eugene
^ permalink raw reply
* Re: [PATCH] mwifiex: Remove casting the return value which is a void pointer
From: Joe Perches @ 2013-09-09 5:41 UTC (permalink / raw)
To: Jingoo Han
Cc: 'John W. Linville', linux-wireless, netdev,
'David Miller', 'Bing Zhao'
In-Reply-To: <004d01cead1d$3058dcf0$910a96d0$%han@samsung.com>
On Mon, 2013-09-09 at 14:26 +0900, Jingoo Han wrote:
> Casting the return value which is a void pointer is redundant.
> The conversion from void pointer to any other pointer type is
> guaranteed by the C programming language.
spatch (aka: Coccinelle) should be able to find a lot
of these with:
$ cat void.cocci
@@
void *t;
type other;
@@
- (other *)t
+ t
^ permalink raw reply
* [PATCH] mwifiex: Remove casting the return value which is a void pointer
From: Jingoo Han @ 2013-09-09 5:26 UTC (permalink / raw)
To: 'John W. Linville'
Cc: linux-wireless, netdev, 'David Miller',
'Bing Zhao', 'Jingoo Han'
Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
drivers/net/wireless/mwifiex/pcie.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 52da8ee..33fa943 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -93,7 +93,7 @@ static int mwifiex_pcie_suspend(struct device *dev)
struct pci_dev *pdev = to_pci_dev(dev);
if (pdev) {
- card = (struct pcie_service_card *) pci_get_drvdata(pdev);
+ card = pci_get_drvdata(pdev);
if (!card || !card->adapter) {
pr_err("Card or adapter structure is not valid\n");
return 0;
@@ -128,7 +128,7 @@ static int mwifiex_pcie_resume(struct device *dev)
struct pci_dev *pdev = to_pci_dev(dev);
if (pdev) {
- card = (struct pcie_service_card *) pci_get_drvdata(pdev);
+ card = pci_get_drvdata(pdev);
if (!card || !card->adapter) {
pr_err("Card or adapter structure is not valid\n");
return 0;
@@ -2037,7 +2037,7 @@ static irqreturn_t mwifiex_pcie_interrupt(int irq, void *context)
goto exit;
}
- card = (struct pcie_service_card *) pci_get_drvdata(pdev);
+ card = pci_get_drvdata(pdev);
if (!card || !card->adapter) {
pr_debug("info: %s: card=%p adapter=%p\n", __func__, card,
card ? card->adapter : NULL);
--
1.7.10.4
^ permalink raw reply related
* [PATCH] mac80211: do not check duplicate IEs when parsing elements.
From: Fred Zhou @ 2013-09-09 3:41 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, Fred Zhou
The 802.11 standard does not prevent the same IE to be
included in one frame (e.g. beacon) multiple times. When
the same ID is seen more than once, it should not be
declared to be parse error. Remove the checking for
duplicate IE.
Signed-off-by: Fred Zhou <fred.zy@gmail.com>
---
net/mac80211/util.c | 43 -------------------------------------------
1 file changed, 43 deletions(-)
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index e1b34a1..49c92af 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -716,49 +716,6 @@ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
break;
}
- switch (id) {
- case WLAN_EID_SSID:
- case WLAN_EID_SUPP_RATES:
- case WLAN_EID_FH_PARAMS:
- case WLAN_EID_DS_PARAMS:
- case WLAN_EID_CF_PARAMS:
- case WLAN_EID_TIM:
- case WLAN_EID_IBSS_PARAMS:
- case WLAN_EID_CHALLENGE:
- case WLAN_EID_RSN:
- case WLAN_EID_ERP_INFO:
- case WLAN_EID_EXT_SUPP_RATES:
- case WLAN_EID_HT_CAPABILITY:
- case WLAN_EID_HT_OPERATION:
- case WLAN_EID_VHT_CAPABILITY:
- case WLAN_EID_VHT_OPERATION:
- case WLAN_EID_MESH_ID:
- case WLAN_EID_MESH_CONFIG:
- case WLAN_EID_PEER_MGMT:
- case WLAN_EID_PREQ:
- case WLAN_EID_PREP:
- case WLAN_EID_PERR:
- case WLAN_EID_RANN:
- case WLAN_EID_CHANNEL_SWITCH:
- case WLAN_EID_EXT_CHANSWITCH_ANN:
- case WLAN_EID_COUNTRY:
- case WLAN_EID_PWR_CONSTRAINT:
- case WLAN_EID_TIMEOUT_INTERVAL:
- case WLAN_EID_SECONDARY_CHANNEL_OFFSET:
- case WLAN_EID_WIDE_BW_CHANNEL_SWITCH:
- /*
- * not listing WLAN_EID_CHANNEL_SWITCH_WRAPPER -- it seems possible
- * that if the content gets bigger it might be needed more than once
- */
- if (test_bit(id, seen_elems)) {
- elems->parse_error = true;
- left -= elen;
- pos += elen;
- continue;
- }
- break;
- }
-
if (calc_crc && id < 64 && (filter & (1ULL << id)))
crc = crc32_be(crc, pos - 2, elen + 2);
--
1.7.9.5
^ permalink raw reply related
* Re: RTL8192CU continually reconnecting
From: Larry Finger @ 2013-09-08 23:16 UTC (permalink / raw)
To: Timothy Rundle; +Cc: linux-wireless
In-Reply-To: <CALa3VXYo1yTuDr22M7AUcp0WLQszzdMSJczRgmD57uPd_68vWQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 897 bytes --]
On 09/08/2013 06:53 AM, Timothy Rundle wrote:
> My TL-WN821N with a RTL8192CU chipsets fails to stay connected. It
> appears to be disconnecting every 5-10 seconds. Since the issue
> happens with the mainline kernel, the downstream maintainer ask me to
> post here. Here is a section of my kernel log:
This problem has been reported before; however, I cannot duplicate it on my
openSUSE KDE system that controls the wireless using NetworkManager.
When taking another look at the code, I realized that rtl8192cu has duplicated a
routine that is found in rtlwifi. The attached patch implements that change.
Please try it and report back. I don't expect it to do much good as your problem
appears to be a bad interaction with the Ubuntu front-end to wireless.
As I am not a Ubuntu user, please provide a full description of the software
that you use to control your wifi connection.
Larry
[-- Attachment #2: 0001-rtlwifi-rtl8192cu-Convert-driver-to-use-rtl_process_.patch --]
[-- Type: text/x-patch, Size: 7697 bytes --]
>From 007a0e9862a6ee518eaad98a78e9d51dfe6a0ff5 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sun, 8 Sep 2013 13:41:28 -0500
Subject: [PATCH] rtlwifi: rtl8192cu: Convert driver to use
rtl_process_phyinfo()
To: linville@tuxdriver.com
Cc: netdev@vger.kernel.org
Remove routine _rtl92c_process_phyinfo() by using the equivalent routine
in driver rtlwifi.
This change also allows the removal of 5 additional routines from rtl8192cu.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
---
drivers/net/wireless/rtlwifi/rtl8192cu/mac.c | 187 +--------------------------
1 file changed, 2 insertions(+), 185 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
index da4f587..3936853 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
@@ -32,6 +32,7 @@
#include "../usb.h"
#include "../ps.h"
#include "../cam.h"
+#include "../stats.h"
#include "reg.h"
#include "def.h"
#include "phy.h"
@@ -738,16 +739,6 @@ static u8 _rtl92c_evm_db_to_percentage(char value)
return ret_val;
}
-static long _rtl92c_translate_todbm(struct ieee80211_hw *hw,
- u8 signal_strength_index)
-{
- long signal_power;
-
- signal_power = (long)((signal_strength_index + 1) >> 1);
- signal_power -= 95;
- return signal_power;
-}
-
static long _rtl92c_signal_scale_mapping(struct ieee80211_hw *hw,
long currsig)
{
@@ -913,180 +904,6 @@ static void _rtl92c_query_rxphystatus(struct ieee80211_hw *hw,
(hw, total_rssi /= rf_rx_num));
}
-static void _rtl92c_process_ui_rssi(struct ieee80211_hw *hw,
- struct rtl_stats *pstats)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_phy *rtlphy = &(rtlpriv->phy);
- u8 rfpath;
- u32 last_rssi, tmpval;
-
- if (pstats->packet_toself || pstats->packet_beacon) {
- rtlpriv->stats.rssi_calculate_cnt++;
- if (rtlpriv->stats.ui_rssi.total_num++ >=
- PHY_RSSI_SLID_WIN_MAX) {
- rtlpriv->stats.ui_rssi.total_num =
- PHY_RSSI_SLID_WIN_MAX;
- last_rssi =
- rtlpriv->stats.ui_rssi.elements[rtlpriv->
- stats.ui_rssi.index];
- rtlpriv->stats.ui_rssi.total_val -= last_rssi;
- }
- rtlpriv->stats.ui_rssi.total_val += pstats->signalstrength;
- rtlpriv->stats.ui_rssi.elements[rtlpriv->stats.ui_rssi.
- index++] = pstats->signalstrength;
- if (rtlpriv->stats.ui_rssi.index >= PHY_RSSI_SLID_WIN_MAX)
- rtlpriv->stats.ui_rssi.index = 0;
- tmpval = rtlpriv->stats.ui_rssi.total_val /
- rtlpriv->stats.ui_rssi.total_num;
- rtlpriv->stats.signal_strength =
- _rtl92c_translate_todbm(hw, (u8) tmpval);
- pstats->rssi = rtlpriv->stats.signal_strength;
- }
- if (!pstats->is_cck && pstats->packet_toself) {
- for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath;
- rfpath++) {
- if (!rtl8192_phy_check_is_legal_rfpath(hw, rfpath))
- continue;
- if (rtlpriv->stats.rx_rssi_percentage[rfpath] == 0) {
- rtlpriv->stats.rx_rssi_percentage[rfpath] =
- pstats->rx_mimo_signalstrength[rfpath];
- }
- if (pstats->rx_mimo_signalstrength[rfpath] >
- rtlpriv->stats.rx_rssi_percentage[rfpath]) {
- rtlpriv->stats.rx_rssi_percentage[rfpath] =
- ((rtlpriv->stats.
- rx_rssi_percentage[rfpath] *
- (RX_SMOOTH_FACTOR - 1)) +
- (pstats->rx_mimo_signalstrength[rfpath])) /
- (RX_SMOOTH_FACTOR);
-
- rtlpriv->stats.rx_rssi_percentage[rfpath] =
- rtlpriv->stats.rx_rssi_percentage[rfpath] +
- 1;
- } else {
- rtlpriv->stats.rx_rssi_percentage[rfpath] =
- ((rtlpriv->stats.
- rx_rssi_percentage[rfpath] *
- (RX_SMOOTH_FACTOR - 1)) +
- (pstats->rx_mimo_signalstrength[rfpath])) /
- (RX_SMOOTH_FACTOR);
- }
- }
- }
-}
-
-static void _rtl92c_update_rxsignalstatistics(struct ieee80211_hw *hw,
- struct rtl_stats *pstats)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- int weighting = 0;
-
- if (rtlpriv->stats.recv_signal_power == 0)
- rtlpriv->stats.recv_signal_power = pstats->recvsignalpower;
- if (pstats->recvsignalpower > rtlpriv->stats.recv_signal_power)
- weighting = 5;
- else if (pstats->recvsignalpower < rtlpriv->stats.recv_signal_power)
- weighting = (-5);
- rtlpriv->stats.recv_signal_power =
- (rtlpriv->stats.recv_signal_power * 5 +
- pstats->recvsignalpower + weighting) / 6;
-}
-
-static void _rtl92c_process_pwdb(struct ieee80211_hw *hw,
- struct rtl_stats *pstats)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- long undec_sm_pwdb = 0;
-
- if (mac->opmode == NL80211_IFTYPE_ADHOC) {
- return;
- } else {
- undec_sm_pwdb = rtlpriv->dm.undec_sm_pwdb;
- }
- if (pstats->packet_toself || pstats->packet_beacon) {
- if (undec_sm_pwdb < 0)
- undec_sm_pwdb = pstats->rx_pwdb_all;
- if (pstats->rx_pwdb_all > (u32) undec_sm_pwdb) {
- undec_sm_pwdb = (((undec_sm_pwdb) *
- (RX_SMOOTH_FACTOR - 1)) +
- (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
- undec_sm_pwdb += 1;
- } else {
- undec_sm_pwdb = (((undec_sm_pwdb) *
- (RX_SMOOTH_FACTOR - 1)) +
- (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
- }
- rtlpriv->dm.undec_sm_pwdb = undec_sm_pwdb;
- _rtl92c_update_rxsignalstatistics(hw, pstats);
- }
-}
-
-static void _rtl92c_process_LINK_Q(struct ieee80211_hw *hw,
- struct rtl_stats *pstats)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- u32 last_evm = 0, n_stream, tmpval;
-
- if (pstats->signalquality != 0) {
- if (pstats->packet_toself || pstats->packet_beacon) {
- if (rtlpriv->stats.LINK_Q.total_num++ >=
- PHY_LINKQUALITY_SLID_WIN_MAX) {
- rtlpriv->stats.LINK_Q.total_num =
- PHY_LINKQUALITY_SLID_WIN_MAX;
- last_evm =
- rtlpriv->stats.LINK_Q.elements
- [rtlpriv->stats.LINK_Q.index];
- rtlpriv->stats.LINK_Q.total_val -=
- last_evm;
- }
- rtlpriv->stats.LINK_Q.total_val +=
- pstats->signalquality;
- rtlpriv->stats.LINK_Q.elements
- [rtlpriv->stats.LINK_Q.index++] =
- pstats->signalquality;
- if (rtlpriv->stats.LINK_Q.index >=
- PHY_LINKQUALITY_SLID_WIN_MAX)
- rtlpriv->stats.LINK_Q.index = 0;
- tmpval = rtlpriv->stats.LINK_Q.total_val /
- rtlpriv->stats.LINK_Q.total_num;
- rtlpriv->stats.signal_quality = tmpval;
- rtlpriv->stats.last_sigstrength_inpercent = tmpval;
- for (n_stream = 0; n_stream < 2;
- n_stream++) {
- if (pstats->RX_SIGQ[n_stream] != -1) {
- if (!rtlpriv->stats.RX_EVM[n_stream]) {
- rtlpriv->stats.RX_EVM[n_stream]
- = pstats->RX_SIGQ[n_stream];
- }
- rtlpriv->stats.RX_EVM[n_stream] =
- ((rtlpriv->stats.RX_EVM
- [n_stream] *
- (RX_SMOOTH_FACTOR - 1)) +
- (pstats->RX_SIGQ
- [n_stream] * 1)) /
- (RX_SMOOTH_FACTOR);
- }
- }
- }
- } else {
- ;
- }
-}
-
-static void _rtl92c_process_phyinfo(struct ieee80211_hw *hw,
- u8 *buffer,
- struct rtl_stats *pcurrent_stats)
-{
- if (!pcurrent_stats->packet_matchbssid &&
- !pcurrent_stats->packet_beacon)
- return;
- _rtl92c_process_ui_rssi(hw, pcurrent_stats);
- _rtl92c_process_pwdb(hw, pcurrent_stats);
- _rtl92c_process_LINK_Q(hw, pcurrent_stats);
-}
-
void rtl92c_translate_rx_signal_stuff(struct ieee80211_hw *hw,
struct sk_buff *skb,
struct rtl_stats *pstats,
@@ -1123,5 +940,5 @@ void rtl92c_translate_rx_signal_stuff(struct ieee80211_hw *hw,
_rtl92c_query_rxphystatus(hw, pstats, pdesc, p_drvinfo,
packet_matchbssid, packet_toself,
packet_beacon);
- _rtl92c_process_phyinfo(hw, tmp_buf, pstats);
+ rtl_process_phyinfo(hw, tmp_buf, pstats);
}
--
1.8.1.4
^ permalink raw reply related
* [PATCH] ath10k: delete struct ce_sendlist
From: Kalle Valo @ 2013-09-08 15:36 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
struct ce_sendlist is useless as we always add just one buffer onto it.
And most importantly, it's ugly as it doesn't use skb properly.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/ce.c | 48 ++++++---------------------------
drivers/net/wireless/ath/ath10k/ce.h | 44 +++---------------------------
drivers/net/wireless/ath/ath10k/pci.c | 40 +++++++++-------------------
3 files changed, 25 insertions(+), 107 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 4f8373c..834e29e 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -338,33 +338,19 @@ int ath10k_ce_send(struct ath10k_ce_pipe *ce_state,
return ret;
}
-void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist, u32 buffer,
- unsigned int nbytes, u32 flags)
-{
- unsigned int num_items = sendlist->num_items;
- struct ce_sendlist_item *item;
-
- item = &sendlist->item[num_items];
- item->data = buffer;
- item->u.nbytes = nbytes;
- item->flags = flags;
- sendlist->num_items++;
-}
-
int ath10k_ce_sendlist_send(struct ath10k_ce_pipe *ce_state,
void *per_transfer_context,
- struct ce_sendlist *sendlist,
- unsigned int transfer_id)
+ unsigned int transfer_id,
+ u32 paddr, unsigned int nbytes,
+ u32 flags)
{
struct ath10k_ce_ring *src_ring = ce_state->src_ring;
- struct ce_sendlist_item *item;
struct ath10k *ar = ce_state->ar;
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
unsigned int nentries_mask = src_ring->nentries_mask;
- unsigned int num_items = sendlist->num_items;
unsigned int sw_index;
unsigned int write_index;
- int i, delta, ret = -ENOMEM;
+ int delta, ret = -ENOMEM;
spin_lock_bh(&ar_pci->ce_lock);
@@ -373,30 +359,12 @@ int ath10k_ce_sendlist_send(struct ath10k_ce_pipe *ce_state,
delta = CE_RING_DELTA(nentries_mask, write_index, sw_index - 1);
- if (delta >= num_items) {
- /*
- * Handle all but the last item uniformly.
- */
- for (i = 0; i < num_items - 1; i++) {
- item = &sendlist->item[i];
- ret = ath10k_ce_send_nolock(ce_state,
- CE_SENDLIST_ITEM_CTXT,
- (u32) item->data,
- item->u.nbytes, transfer_id,
- item->flags |
- CE_SEND_FLAG_GATHER);
- if (ret)
- ath10k_warn("CE send failed for item: %d\n", i);
- }
- /*
- * Provide valid context pointer for final item.
- */
- item = &sendlist->item[i];
+ if (delta >= 1) {
ret = ath10k_ce_send_nolock(ce_state, per_transfer_context,
- (u32) item->data, item->u.nbytes,
- transfer_id, item->flags);
+ paddr, nbytes,
+ transfer_id, flags);
if (ret)
- ath10k_warn("CE send failed for last item: %d\n", i);
+ ath10k_warn("CE send failed: %d\n", ret);
}
spin_unlock_bh(&ar_pci->ce_lock);
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index fb22361..aec8028 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -27,7 +27,6 @@
/* Descriptor rings must be aligned to this boundary */
#define CE_DESC_RING_ALIGN 8
-#define CE_SENDLIST_ITEMS_MAX 12
#define CE_SEND_FLAG_GATHER 0x00010000
/*
@@ -124,24 +123,6 @@ struct ath10k_ce_pipe {
struct ath10k_ce_ring *dest_ring;
};
-struct ce_sendlist_item {
- /* e.g. buffer or desc list */
- dma_addr_t data;
- union {
- /* simple buffer */
- unsigned int nbytes;
- /* Rx descriptor list */
- unsigned int ndesc;
- } u;
- /* externally-specified flags; OR-ed with internal flags */
- u32 flags;
-};
-
-struct ce_sendlist {
- unsigned int num_items;
- struct ce_sendlist_item item[CE_SENDLIST_ITEMS_MAX];
-};
-
/* Copy Engine settable attributes */
struct ce_attr;
@@ -175,13 +156,6 @@ void ath10k_ce_send_cb_register(struct ath10k_ce_pipe *ce_state,
void (*send_cb)(struct ath10k_ce_pipe *),
int disable_interrupts);
-/* Append a simple buffer (address/length) to a sendlist. */
-void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist,
- u32 buffer,
- unsigned int nbytes,
- /* OR-ed with internal flags */
- u32 flags);
-
/*
* Queue a "sendlist" of buffers to be sent using gather to a single
* anonymous destination buffer
@@ -193,10 +167,10 @@ void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist,
* Implemenation note: Pushes multiple buffers with Gather to Source ring.
*/
int ath10k_ce_sendlist_send(struct ath10k_ce_pipe *ce_state,
- void *per_transfer_send_context,
- struct ce_sendlist *sendlist,
- /* 14 bits */
- unsigned int transfer_id);
+ void *per_transfer_context,
+ unsigned int transfer_id,
+ u32 paddr, unsigned int nbytes,
+ u32 flags);
/*==================Recv=======================*/
@@ -307,16 +281,6 @@ struct ce_attr {
unsigned int dest_nentries;
};
-/*
- * When using sendlist_send to transfer multiple buffer fragments, the
- * transfer context of each fragment, except last one, will be filled
- * with CE_SENDLIST_ITEM_CTXT. ce_completed_send will return success for
- * each fragment done with send and the transfer context would be
- * CE_SENDLIST_ITEM_CTXT. Upper layer could use this to identify the
- * status of a send completion.
- */
-#define CE_SENDLIST_ITEM_CTXT ((void *)0xcecebeef)
-
#define SR_BA_ADDRESS 0x0000
#define SR_SIZE_ADDRESS 0x0004
#define DR_BA_ADDRESS 0x0008
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 899a8c0..ecaf213 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -626,17 +626,9 @@ static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state)
while (ath10k_ce_completed_send_next(ce_state, &transfer_context,
&ce_data, &nbytes,
&transfer_id) == 0) {
- /*
- * For the send completion of an item in sendlist, just
- * increment num_sends_allowed. The upper layer callback will
- * be triggered when last fragment is done with send.
- */
- if (transfer_context == CE_SENDLIST_ITEM_CTXT) {
- spin_lock_bh(&pipe_info->pipe_lock);
- pipe_info->num_sends_allowed++;
- spin_unlock_bh(&pipe_info->pipe_lock);
- continue;
- }
+ spin_lock_bh(&pipe_info->pipe_lock);
+ pipe_info->num_sends_allowed++;
+ spin_unlock_bh(&pipe_info->pipe_lock);
compl = get_free_compl(pipe_info);
if (!compl)
@@ -714,13 +706,10 @@ static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id,
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
struct ath10k_pci_pipe *pipe_info = &(ar_pci->pipe_info[pipe_id]);
struct ath10k_ce_pipe *ce_hdl = pipe_info->ce_hdl;
- struct ce_sendlist sendlist;
unsigned int len;
u32 flags = 0;
int ret;
- memset(&sendlist, 0, sizeof(struct ce_sendlist));
-
len = min(bytes, nbuf->len);
bytes -= len;
@@ -735,8 +724,6 @@ static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id,
"ath10k tx: data: ",
nbuf->data, nbuf->len);
- ath10k_ce_sendlist_buf_add(&sendlist, skb_cb->paddr, len, flags);
-
/* Make sure we have resources to handle this request */
spin_lock_bh(&pipe_info->pipe_lock);
if (!pipe_info->num_sends_allowed) {
@@ -747,7 +734,8 @@ static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id,
pipe_info->num_sends_allowed--;
spin_unlock_bh(&pipe_info->pipe_lock);
- ret = ath10k_ce_sendlist_send(ce_hdl, nbuf, &sendlist, transfer_id);
+ ret = ath10k_ce_sendlist_send(ce_hdl, nbuf, transfer_id,
+ skb_cb->paddr, len, flags);
if (ret)
ath10k_warn("CE send failed: %p\n", nbuf);
@@ -1302,16 +1290,14 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info)
while (ath10k_ce_cancel_send_next(ce_hdl, (void **)&netbuf,
&ce_data, &nbytes, &id) == 0) {
- if (netbuf != CE_SENDLIST_ITEM_CTXT) {
- /*
- * Indicate the completion to higer layer to free
- * the buffer
- */
- ATH10K_SKB_CB(netbuf)->is_aborted = true;
- ar_pci->msg_callbacks_current.tx_completion(ar,
- netbuf,
- id);
- }
+ /*
+ * Indicate the completion to higer layer to free
+ * the buffer
+ */
+ ATH10K_SKB_CB(netbuf)->is_aborted = true;
+ ar_pci->msg_callbacks_current.tx_completion(ar,
+ netbuf,
+ id);
}
}
^ permalink raw reply related
* [PATCH] ath10k: Calculate correct peer PHY mode for VHT
From: Kalle Valo @ 2013-09-08 15:19 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
The peer PHY mode for 11ac operation needs to be determined
properly based on the channel bandwidth being used. Fix
this so that the proper mode is given to the firmware.
kvalo: earlier we used 11na-ht20 in STA mode for 11ac AP peer, this
patch changes that to 11ac-vht80. I didn't notice any change in
throughput in my tests, but nevertheless it's the right thing
to do.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2b11856..8b9fb66 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1080,8 +1080,6 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
{
enum wmi_phy_mode phymode = MODE_UNKNOWN;
- /* FIXME: add VHT */
-
switch (ar->hw->conf.chandef.chan->band) {
case IEEE80211_BAND_2GHZ:
if (sta->ht_cap.ht_supported) {
@@ -1095,7 +1093,17 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
break;
case IEEE80211_BAND_5GHZ:
- if (sta->ht_cap.ht_supported) {
+ /*
+ * Check VHT first.
+ */
+ if (sta->vht_cap.vht_supported) {
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
+ phymode = MODE_11AC_VHT80;
+ else if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ phymode = MODE_11AC_VHT40;
+ else if (sta->bandwidth == IEEE80211_STA_RX_BW_20)
+ phymode = MODE_11AC_VHT20;
+ } else if (sta->ht_cap.ht_supported) {
if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
phymode = MODE_11NA_HT40;
else
^ permalink raw reply related
* [PATCH 8/8] ath10k: print phymode as a string
From: Kalle Valo @ 2013-09-08 14:56 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
In-Reply-To: <20130908145435.3136.49168.stgit@localhost6.localdomain6>
Makes it easier to read debug logs.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 9 ++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 42 +++++++++++++++++++++++++++++++++
2 files changed, 49 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b8c81bb..2b11856 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -460,6 +460,11 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
arg.ssid_len = arvif->vif->bss_conf.ssid_len;
}
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d start center_freq %d phymode %s\n",
+ arg.vdev_id, arg.channel.freq,
+ ath10k_wmi_phymode_str(arg.channel.mode));
+
ret = ath10k_wmi_vdev_start(ar, &arg);
if (ret) {
ath10k_warn("WMI vdev start failed: ret %d\n", ret);
@@ -1104,8 +1109,8 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
break;
}
- ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n",
- sta->addr, phymode);
+ ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %s\n",
+ sta->addr, ath10k_wmi_phymode_str(phymode));
arg->peer_phymode = phymode;
WARN_ON(phymode == MODE_UNKNOWN);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 40fcf05..ab46582 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -508,6 +508,48 @@ enum wmi_phy_mode {
MODE_MAX = 14
};
+static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
+{
+ switch (mode) {
+ case MODE_11A:
+ return "11a";
+ case MODE_11G:
+ return "11g";
+ case MODE_11B:
+ return "11b";
+ case MODE_11GONLY:
+ return "11gonly";
+ case MODE_11NA_HT20:
+ return "11na-ht20";
+ case MODE_11NG_HT20:
+ return "11ng-ht20";
+ case MODE_11NA_HT40:
+ return "11na-ht40";
+ case MODE_11NG_HT40:
+ return "11ng-ht40";
+ case MODE_11AC_VHT20:
+ return "11ac-vht20";
+ case MODE_11AC_VHT40:
+ return "11ac-vht40";
+ case MODE_11AC_VHT80:
+ return "11ac-vht80";
+ case MODE_11AC_VHT20_2G:
+ return "11ac-vht20-2g";
+ case MODE_11AC_VHT40_2G:
+ return "11ac-vht40-2g";
+ case MODE_11AC_VHT80_2G:
+ return "11ac-vht80-2g";
+ case MODE_UNKNOWN:
+ /* skip */
+ break;
+
+ /* no default handler to allow compiler to check that the
+ * enum is fully handled */
+ };
+
+ return "<unknown>";
+}
+
#define WMI_CHAN_LIST_TAG 0x1
#define WMI_SSID_LIST_TAG 0x2
#define WMI_BSSID_LIST_TAG 0x3
^ permalink raw reply related
* [PATCH 7/8] ath10k: clean mac.c debug messages
From: Kalle Valo @ 2013-09-08 14:56 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
In-Reply-To: <20130908145435.3136.49168.stgit@localhost6.localdomain6>
Just to unify with the rest of debug messages. Minimal functional changes,
only major ones are removal of the awkward "else" style in debug
messages.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 180 +++++++++++++++++----------------
1 file changed, 92 insertions(+), 88 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 248248b..b8c81bb 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -604,7 +604,7 @@ static int ath10k_monitor_create(struct ath10k *ar)
goto vdev_fail;
}
- ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d created\n",
ar->monitor_vdev_id);
ar->monitor_present = true;
@@ -636,7 +636,7 @@ static int ath10k_monitor_destroy(struct ath10k *ar)
ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
ar->monitor_present = false;
- ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n",
ar->monitor_vdev_id);
return ret;
}
@@ -665,7 +665,7 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
arvif->vdev_id);
return;
}
- ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id);
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
}
static void ath10k_control_ibss(struct ath10k_vif *arvif,
@@ -749,14 +749,14 @@ static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
psmode = WMI_STA_PS_MODE_DISABLED;
}
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
+ arvif->vdev_id, psmode ? "enable" : "disable");
+
ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
psmode);
if (ar_iter->ret)
ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
psmode, arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n",
- psmode, arvif->vdev_id);
}
/**********************/
@@ -946,7 +946,8 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
arg->peer_ht_rates.num_rates = n;
arg->peer_num_spatial_streams = max((n+7) / 8, 1);
- ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
+ arg->addr,
arg->peer_ht_rates.num_rates,
arg->peer_num_spatial_streams);
}
@@ -966,7 +967,7 @@ static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
arg->peer_flags |= WMI_PEER_QOS;
if (sta->wme && sta->uapsd_queues) {
- ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
sta->uapsd_queues, sta->max_sp);
arg->peer_flags |= WMI_PEER_APSD;
@@ -1045,7 +1046,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
arg->peer_vht_rates.tx_mcs_set =
__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
- ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n");
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
+ sta->addr, arg->peer_max_mpdu, arg->peer_flags);
}
static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
@@ -1102,6 +1104,9 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
break;
}
+ ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n",
+ sta->addr, phymode);
+
arg->peer_phymode = phymode;
WARN_ON(phymode == MODE_UNKNOWN);
}
@@ -1159,15 +1164,15 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
rcu_read_unlock();
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d up (associated) bssid %pM aid %d\n",
+ arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+
ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid,
bss_conf->bssid);
if (ret)
ath10k_warn("VDEV: %d up failed: ret %d\n",
arvif->vdev_id, ret);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "VDEV: %d associated, BSSID: %pM, AID: %d\n",
- arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
}
/*
@@ -1188,10 +1193,11 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
* No idea why this happens, even though VDEV-DOWN is supposed
* to be analogous to link down, so just stop the VDEV.
*/
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d stop (disassociated\n",
+ arvif->vdev_id);
+
+ /* FIXME: check return value */
ret = ath10k_vdev_stop(arvif);
- if (!ret)
- ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n",
- arvif->vdev_id);
/*
* If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and
@@ -1200,10 +1206,10 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
* interfaces as it expects there is no rx when no interface is
* running.
*/
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d down\n", arvif->vdev_id);
+
+ /* FIXME: why don't we print error if wmi call fails? */
ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
- if (ret)
- ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n",
- arvif->vdev_id, ret);
ath10k_wmi_flush_tx(ar);
@@ -1330,8 +1336,8 @@ static int ath10k_update_channel_list(struct ath10k *ar)
continue;
ath10k_dbg(ATH10K_DBG_WMI,
- "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
- __func__, ch - arg.channels, arg.n_channels,
+ "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+ ch - arg.channels, arg.n_channels,
ch->freq, ch->max_power, ch->max_reg_power,
ch->max_antenna_gain, ch->mode);
@@ -1431,7 +1437,8 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
if (key->keyidx == arvif->def_wep_key_index)
return;
- ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx);
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d keyidx %d\n",
+ arvif->vdev_id, key->keyidx);
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
WMI_VDEV_PARAM_DEF_KEYID,
@@ -1534,7 +1541,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
mutex_lock(&ar->conf_mutex);
- ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac offchannel skb %p\n",
skb);
hdr = (struct ieee80211_hdr *)skb->data;
@@ -1546,6 +1553,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
spin_unlock_bh(&ar->data_lock);
if (peer)
+ /* FIXME: should this use ath10k_warn()? */
ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
peer_addr, vdev_id);
@@ -1886,7 +1894,7 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
mutex_lock(&ar->conf_mutex);
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
- ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac config channel %d mhz\n",
conf->chandef.chan->center_freq);
spin_lock_bh(&ar->data_lock);
ar->rx_channel = conf->chandef.chan;
@@ -1975,7 +1983,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
break;
}
- ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d\n",
arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype);
ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
@@ -2054,8 +2062,6 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
mutex_lock(&ar->conf_mutex);
- ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id);
-
ar->free_vdev_map |= 1 << (arvif->vdev_id);
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
@@ -2066,6 +2072,9 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
kfree(arvif->u.ap.noa_data);
}
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev delete %d (remove interface)\n",
+ arvif->vdev_id);
+
ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
if (ret)
ath10k_warn("WMI vdev delete failed: %d\n", ret);
@@ -2107,18 +2116,20 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw,
if ((ar->filter_flags & FIF_PROMISC_IN_BSS) &&
!ar->monitor_enabled) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d start\n",
+ ar->monitor_vdev_id);
+
ret = ath10k_monitor_start(ar, ar->monitor_vdev_id);
if (ret)
ath10k_warn("Unable to start monitor mode\n");
- else
- ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n");
} else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) &&
ar->monitor_enabled) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d stop\n",
+ ar->monitor_vdev_id);
+
ret = ath10k_monitor_stop(ar);
if (ret)
ath10k_warn("Unable to stop monitor mode\n");
- else
- ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n");
}
mutex_unlock(&ar->conf_mutex);
@@ -2143,41 +2154,41 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
WMI_VDEV_PARAM_BEACON_INTERVAL,
arvif->beacon_interval);
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d beacon_interval %d\n",
+ arvif->vdev_id, arvif->beacon_interval);
+
if (ret)
ath10k_warn("Failed to set beacon interval for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Beacon interval: %d set for VDEV: %d\n",
- arvif->beacon_interval, arvif->vdev_id);
}
if (changed & BSS_CHANGED_BEACON) {
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "vdev %d set beacon tx mode to staggered\n",
+ arvif->vdev_id);
+
ret = ath10k_wmi_pdev_set_param(ar,
WMI_PDEV_PARAM_BEACON_TX_MODE,
WMI_BEACON_STAGGERED_MODE);
if (ret)
ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set staggered beacon mode for VDEV: %d\n",
- arvif->vdev_id);
}
if (changed & BSS_CHANGED_BEACON_INFO) {
arvif->dtim_period = info->dtim_period;
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d dtim_period %d\n",
+ arvif->vdev_id, arvif->dtim_period);
+
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
WMI_VDEV_PARAM_DTIM_PERIOD,
arvif->dtim_period);
if (ret)
ath10k_warn("Failed to set dtim period for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set dtim period: %d for VDEV: %d\n",
- arvif->dtim_period, arvif->vdev_id);
}
if (changed & BSS_CHANGED_SSID &&
@@ -2190,16 +2201,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_BSSID) {
if (!is_zero_ether_addr(info->bssid)) {
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d create peer %pM\n",
+ arvif->vdev_id, info->bssid);
+
ret = ath10k_peer_create(ar, arvif->vdev_id,
info->bssid);
if (ret)
ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
info->bssid, arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Added peer: %pM for VDEV: %d\n",
- info->bssid, arvif->vdev_id);
-
if (vif->type == NL80211_IFTYPE_STATION) {
/*
@@ -2209,11 +2219,12 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
memcpy(arvif->u.sta.bssid, info->bssid,
ETH_ALEN);
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d start %pM\n",
+ arvif->vdev_id, info->bssid);
+
+ /* FIXME: check return value */
ret = ath10k_vdev_start(arvif);
- if (!ret)
- ath10k_dbg(ATH10K_DBG_MAC,
- "VDEV: %d started with BSSID: %pM\n",
- arvif->vdev_id, info->bssid);
}
/*
@@ -2237,16 +2248,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
else
cts_prot = 0;
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
+ arvif->vdev_id, cts_prot);
+
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
WMI_VDEV_PARAM_ENABLE_RTSCTS,
cts_prot);
if (ret)
ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set CTS prot: %d for VDEV: %d\n",
- cts_prot, arvif->vdev_id);
}
if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -2257,16 +2267,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
else
slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
+ arvif->vdev_id, slottime);
+
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
WMI_VDEV_PARAM_SLOT_TIME,
slottime);
if (ret)
ath10k_warn("Failed to set erp slot for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set slottime: %d for VDEV: %d\n",
- slottime, arvif->vdev_id);
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
@@ -2276,16 +2285,16 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
else
preamble = WMI_VDEV_PREAMBLE_LONG;
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d preamble %dn",
+ arvif->vdev_id, preamble);
+
ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
WMI_VDEV_PARAM_PREAMBLE,
preamble);
if (ret)
ath10k_warn("Failed to set preamble for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set preamble: %d for VDEV: %d\n",
- preamble, arvif->vdev_id);
}
if (changed & BSS_CHANGED_ASSOC) {
@@ -2476,27 +2485,26 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* New station addition.
*/
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d peer create %pM (new sta)\n",
+ arvif->vdev_id, sta->addr);
+
ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
if (ret)
ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
sta->addr, arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Added peer: %pM for VDEV: %d\n",
- sta->addr, arvif->vdev_id);
} else if ((old_state == IEEE80211_STA_NONE &&
new_state == IEEE80211_STA_NOTEXIST)) {
/*
* Existing station deletion.
*/
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d peer delete %pM (sta gone)\n",
+ arvif->vdev_id, sta->addr);
ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
if (ret)
ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n",
sta->addr, arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Removed peer: %pM for VDEV: %d\n",
- sta->addr, arvif->vdev_id);
if (vif->type == NL80211_IFTYPE_STATION)
ath10k_bss_disassoc(hw, vif);
@@ -2507,14 +2515,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* New association.
*/
+ ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM associated\n",
+ sta->addr);
+
ret = ath10k_station_assoc(ar, arvif, sta);
if (ret)
ath10k_warn("Failed to associate station: %pM\n",
sta->addr);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Station %pM moved to assoc state\n",
- sta->addr);
} else if (old_state == IEEE80211_STA_ASSOC &&
new_state == IEEE80211_STA_AUTH &&
(vif->type == NL80211_IFTYPE_AP ||
@@ -2522,14 +2529,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* Disassociation.
*/
+ ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
+ sta->addr);
+
ret = ath10k_station_disassoc(ar, arvif, sta);
if (ret)
ath10k_warn("Failed to disassociate station: %pM\n",
sta->addr);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Station %pM moved to disassociated state\n",
- sta->addr);
}
mutex_unlock(&ar->conf_mutex);
@@ -2749,14 +2755,13 @@ static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
return;
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts_threshold %d\n",
+ arvif->vdev_id, rts);
+
ar_iter->ret = ath10k_mac_set_rts(arvif, rts);
if (ar_iter->ret)
ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set RTS threshold: %d for VDEV: %d\n",
- rts, arvif->vdev_id);
}
static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
@@ -2791,14 +2796,13 @@ static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
return;
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation_threshold %d\n",
+ arvif->vdev_id, frag);
+
ar_iter->ret = ath10k_mac_set_frag(arvif, frag);
if (ar_iter->ret)
ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set frag threshold: %d for VDEV: %d\n",
- frag, arvif->vdev_id);
}
static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
^ permalink raw reply related
* [PATCH 6/8] ath10k: add boot messages to htt.c
From: Kalle Valo @ 2013-09-08 14:56 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
In-Reply-To: <20130908145435.3136.49168.stgit@localhost6.localdomain6>
To unify the boot debug level.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 2 +-
drivers/net/wireless/ath/ath10k/htt_tx.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index af31d2f..a39fbf4 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -502,7 +502,7 @@ int ath10k_htt_rx_attach(struct ath10k_htt *htt)
if (__ath10k_htt_rx_ring_fill_n(htt, htt->rx_ring.fill_level))
goto err_fill_ring;
- ath10k_dbg(ATH10K_DBG_HTT, "HTT RX ring size: %d, fill_level: %d\n",
+ ath10k_dbg(ATH10K_DBG_BOOT, "htt rx ring size %d fill_level %d\n",
htt->rx_ring.size, htt->rx_ring.fill_level);
return 0;
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index b6b1420..4548128 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -96,7 +96,7 @@ int ath10k_htt_tx_attach(struct ath10k_htt *htt)
htt->max_num_pending_tx = ath10k_hif_get_free_queue_number(htt->ar,
pipe);
- ath10k_dbg(ATH10K_DBG_HTT, "htt tx max num pending tx %d\n",
+ ath10k_dbg(ATH10K_DBG_BOOT, "htt tx max num pending tx %d\n",
htt->max_num_pending_tx);
htt->pending_tx = kzalloc(sizeof(*htt->pending_tx) *
^ permalink raw reply related
* [PATCH 5/8] ath10k: add boot debug messages to htc.c
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
In-Reply-To: <20130908145435.3136.49168.stgit@localhost6.localdomain6>
To unify the boot debug level.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/htc.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 7d445d3..f03fd8d 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -752,8 +752,8 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc,
tx_alloc = ath10k_htc_get_credit_allocation(htc,
conn_req->service_id);
if (!tx_alloc)
- ath10k_dbg(ATH10K_DBG_HTC,
- "HTC Service %s does not allocate target credits\n",
+ ath10k_dbg(ATH10K_DBG_BOOT,
+ "boot htc service %s does not allocate target credits\n",
htc_service_name(conn_req->service_id));
skb = ath10k_htc_build_tx_ctrl_skb(htc->ar);
@@ -873,19 +873,19 @@ setup:
if (status)
return status;
- ath10k_dbg(ATH10K_DBG_HTC,
- "HTC service: %s UL pipe: %d DL pipe: %d eid: %d ready\n",
+ ath10k_dbg(ATH10K_DBG_BOOT,
+ "boot htc service '%s' ul pipe %d dl pipe %d eid %d ready\n",
htc_service_name(ep->service_id), ep->ul_pipe_id,
ep->dl_pipe_id, ep->eid);
- ath10k_dbg(ATH10K_DBG_HTC,
- "EP %d UL polled: %d, DL polled: %d\n",
+ ath10k_dbg(ATH10K_DBG_BOOT,
+ "boot htc ep %d ul polled %d dl polled %d\n",
ep->eid, ep->ul_is_polled, ep->dl_is_polled);
if (disable_credit_flow_ctrl && ep->tx_credit_flow_enabled) {
ep->tx_credit_flow_enabled = false;
- ath10k_dbg(ATH10K_DBG_HTC,
- "HTC service: %s eid: %d TX flow control disabled\n",
+ ath10k_dbg(ATH10K_DBG_BOOT,
+ "boot htc service '%s' eid %d TX flow control disabled\n",
htc_service_name(ep->service_id), assigned_eid);
}
^ permalink raw reply related
* [PATCH 4/8] ath10k: add boot debug messages to pci.c and ce.c
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
In-Reply-To: <20130908145435.3136.49168.stgit@localhost6.localdomain6>
To unify all boot related debug messages into one debug
level.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/ce.c | 8 ++++++++
drivers/net/wireless/ath/ath10k/pci.c | 6 ++++--
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index afe5df4..38c2571 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -1010,6 +1010,10 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar,
ath10k_ce_src_ring_lowmark_set(ar, ctrl_addr, 0);
ath10k_ce_src_ring_highmark_set(ar, ctrl_addr, nentries);
+ ath10k_dbg(ATH10K_DBG_BOOT,
+ "boot ce src ring id %d entries %d base_addr %p\n",
+ ce_id, nentries, src_ring->base_addr_owner_space);
+
return 0;
}
@@ -1091,6 +1095,10 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar,
ath10k_ce_dest_ring_lowmark_set(ar, ctrl_addr, 0);
ath10k_ce_dest_ring_highmark_set(ar, ctrl_addr, nentries);
+ ath10k_dbg(ATH10K_DBG_BOOT,
+ "boot ce dest ring id %d entries %d base_addr %p\n",
+ ce_id, nentries, dest_ring->base_addr_owner_space);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 880fcd0d..503a8c170 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2375,10 +2375,10 @@ static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci)
switch (i) {
case ATH10K_PCI_FEATURE_MSI_X:
- ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n");
+ ath10k_dbg(ATH10K_DBG_BOOT, "device supports MSI-X\n");
break;
case ATH10K_PCI_FEATURE_SOC_POWER_SAVE:
- ath10k_dbg(ATH10K_DBG_PCI, "QCA98XX SoC power save enabled\n");
+ ath10k_dbg(ATH10K_DBG_BOOT, "QCA98XX SoC power save enabled\n");
break;
}
}
@@ -2504,6 +2504,8 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
ath10k_do_pci_sleep(ar);
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot pci_mem 0x%p\n", ar_pci->mem);
+
ret = ath10k_core_register(ar, chip_id);
if (ret) {
ath10k_err("could not register driver core (%d)\n", ret);
^ permalink raw reply related
* [PATCH 3/8] ath10k: cleanup debug messages in core.c
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
In-Reply-To: <20130908145435.3136.49168.stgit@localhost6.localdomain6>
Fix them to follow the general logging style in ath10k.
While at it, add print id chip_id to the debug log.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 0ed60fd..76906d5 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
static void ath10k_send_suspend_complete(struct ath10k *ar)
{
- ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__);
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot suspend complete\n");
ar->is_target_paused = true;
wake_up(&ar->event_queue);
@@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar)
goto timeout;
}
- ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n");
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot wmi ready\n");
return 0;
timeout:
@@ -204,7 +204,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar,
}
ath10k_dbg(ATH10K_DBG_BOOT,
- "ath10k: Board extended Data download addr: 0x%x\n",
+ "boot push board extended data addr 0x%x\n",
board_ext_data_addr);
if (board_ext_data_addr == 0)
@@ -722,6 +722,9 @@ static int ath10k_core_check_chip_id(struct ath10k *ar)
{
u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV);
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n",
+ ar->chip_id, hw_revision);
+
/* Check that we are not using hw1.0 (some of them have same pci id
* as hw2.0) before doing anything else as ath10k crashes horribly
* due to missing hw1.0 workarounds. */
^ permalink raw reply related
* [PATCH 2/8] ath10k: rename ATH10K_DBG_CORE to BOOT
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
In-Reply-To: <20130908145435.3136.49168.stgit@localhost6.localdomain6>
core.c mostly deals with driver and firmware starting related
actions. And we can use the boot level also in other components,
like PCI and HTT.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 6 +++---
drivers/net/wireless/ath/ath10k/debug.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 8a68839..0ed60fd 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
static void ath10k_send_suspend_complete(struct ath10k *ar)
{
- ath10k_dbg(ATH10K_DBG_CORE, "%s\n", __func__);
+ ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__);
ar->is_target_paused = true;
wake_up(&ar->event_queue);
@@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar)
goto timeout;
}
- ath10k_dbg(ATH10K_DBG_CORE, "core wmi ready\n");
+ ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n");
return 0;
timeout:
@@ -203,7 +203,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar,
return ret;
}
- ath10k_dbg(ATH10K_DBG_CORE,
+ ath10k_dbg(ATH10K_DBG_BOOT,
"ath10k: Board extended Data download addr: 0x%x\n",
board_ext_data_addr);
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index dfa3070..4bef061 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -27,7 +27,7 @@ enum ath10k_debug_mask {
ATH10K_DBG_HTC = 0x00000004,
ATH10K_DBG_HTT = 0x00000008,
ATH10K_DBG_MAC = 0x00000010,
- ATH10K_DBG_CORE = 0x00000020,
+ ATH10K_DBG_BOOT = 0x00000020,
ATH10K_DBG_PCI_DUMP = 0x00000040,
ATH10K_DBG_HTT_DUMP = 0x00000080,
ATH10K_DBG_MGMT = 0x00000100,
^ permalink raw reply related
* [PATCH 1/8] ath10k: add BMI log level
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
In-Reply-To: <20130908145435.3136.49168.stgit@localhost6.localdomain6>
Also clean BMI log messages and add few more.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/bmi.c | 42 ++++++++++++++++++++-----------
drivers/net/wireless/ath/ath10k/debug.h | 1 +
2 files changed, 28 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c
index 744da6d..a1f0996 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.c
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -22,7 +22,8 @@
void ath10k_bmi_start(struct ath10k *ar)
{
- ath10k_dbg(ATH10K_DBG_CORE, "BMI started\n");
+ ath10k_dbg(ATH10K_DBG_BMI, "bmi start\n");
+
ar->bmi.done_sent = false;
}
@@ -32,8 +33,10 @@ int ath10k_bmi_done(struct ath10k *ar)
u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.done);
int ret;
+ ath10k_dbg(ATH10K_DBG_BMI, "bmi done\n");
+
if (ar->bmi.done_sent) {
- ath10k_dbg(ATH10K_DBG_CORE, "%s skipped\n", __func__);
+ ath10k_dbg(ATH10K_DBG_BMI, "bmi skipped\n");
return 0;
}
@@ -46,7 +49,6 @@ int ath10k_bmi_done(struct ath10k *ar)
return ret;
}
- ath10k_dbg(ATH10K_DBG_CORE, "BMI done\n");
return 0;
}
@@ -59,6 +61,8 @@ int ath10k_bmi_get_target_info(struct ath10k *ar,
u32 resplen = sizeof(resp.get_target_info);
int ret;
+ ath10k_dbg(ATH10K_DBG_BMI, "bmi get target info\n");
+
if (ar->bmi.done_sent) {
ath10k_warn("BMI Get Target Info Command disallowed\n");
return -EBUSY;
@@ -80,6 +84,7 @@ int ath10k_bmi_get_target_info(struct ath10k *ar,
target_info->version = __le32_to_cpu(resp.get_target_info.version);
target_info->type = __le32_to_cpu(resp.get_target_info.type);
+
return 0;
}
@@ -92,15 +97,14 @@ int ath10k_bmi_read_memory(struct ath10k *ar,
u32 rxlen;
int ret;
+ ath10k_dbg(ATH10K_DBG_BMI, "bmi read address 0x%x length %d\n",
+ address, length);
+
if (ar->bmi.done_sent) {
ath10k_warn("command disallowed\n");
return -EBUSY;
}
- ath10k_dbg(ATH10K_DBG_CORE,
- "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
- __func__, ar, address, length);
-
while (length) {
rxlen = min_t(u32, length, BMI_MAX_DATA_SIZE);
@@ -133,15 +137,14 @@ int ath10k_bmi_write_memory(struct ath10k *ar,
u32 txlen;
int ret;
+ ath10k_dbg(ATH10K_DBG_BMI, "bmi write address 0x%x length %d\n",
+ address, length);
+
if (ar->bmi.done_sent) {
ath10k_warn("command disallowed\n");
return -EBUSY;
}
- ath10k_dbg(ATH10K_DBG_CORE,
- "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
- __func__, ar, address, length);
-
while (length) {
txlen = min(length, BMI_MAX_DATA_SIZE - hdrlen);
@@ -180,15 +183,14 @@ int ath10k_bmi_execute(struct ath10k *ar, u32 address, u32 *param)
u32 resplen = sizeof(resp.execute);
int ret;
+ ath10k_dbg(ATH10K_DBG_BMI, "bmi execute address 0x%x param 0x%x\n",
+ address, *param);
+
if (ar->bmi.done_sent) {
ath10k_warn("command disallowed\n");
return -EBUSY;
}
- ath10k_dbg(ATH10K_DBG_CORE,
- "%s: (device: 0x%p, address: 0x%x, param: %d)\n",
- __func__, ar, address, *param);
-
cmd.id = __cpu_to_le32(BMI_EXECUTE);
cmd.execute.addr = __cpu_to_le32(address);
cmd.execute.param = __cpu_to_le32(*param);
@@ -216,6 +218,9 @@ int ath10k_bmi_lz_data(struct ath10k *ar, const void *buffer, u32 length)
u32 txlen;
int ret;
+ ath10k_dbg(ATH10K_DBG_BMI, "bmi lz data buffer 0x%p length %d\n",
+ buffer, length);
+
if (ar->bmi.done_sent) {
ath10k_warn("command disallowed\n");
return -EBUSY;
@@ -250,6 +255,9 @@ int ath10k_bmi_lz_stream_start(struct ath10k *ar, u32 address)
u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.lz_start);
int ret;
+ ath10k_dbg(ATH10K_DBG_BMI, "bmi lz stream start address 0x%x\n",
+ address);
+
if (ar->bmi.done_sent) {
ath10k_warn("command disallowed\n");
return -EBUSY;
@@ -275,6 +283,10 @@ int ath10k_bmi_fast_download(struct ath10k *ar,
u32 trailer_len = length - head_len;
int ret;
+ ath10k_dbg(ATH10K_DBG_BMI,
+ "bmi fast download address 0x%x buffer 0x%p length %d\n",
+ address, buffer, length);
+
ret = ath10k_bmi_lz_stream_start(ar, address);
if (ret)
return ret;
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 9c442a8..dfa3070 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -32,6 +32,7 @@ enum ath10k_debug_mask {
ATH10K_DBG_HTT_DUMP = 0x00000080,
ATH10K_DBG_MGMT = 0x00000100,
ATH10K_DBG_DATA = 0x00000200,
+ ATH10K_DBG_BMI = 0x00000400,
ATH10K_DBG_ANY = 0xffffffff,
};
^ permalink raw reply related
* [PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
Simple message log cleanup. Please review.
---
Kalle Valo (8):
ath10k: add BMI log level
ath10k: rename ATH10K_DBG_CORE to BOOT
ath10k: cleanup debug messages in core.c
ath10k: add boot debug messages to pci.c and ce.c
ath10k: add boot debug messages to htc.c
ath10k: add boot messages to htt.c
ath10k: clean mac.c debug messages
ath10k: print phymode as a string
drivers/net/wireless/ath/ath10k/bmi.c | 42 ++++---
drivers/net/wireless/ath/ath10k/ce.c | 8 +
drivers/net/wireless/ath/ath10k/core.c | 11 +-
drivers/net/wireless/ath/ath10k/debug.h | 3
drivers/net/wireless/ath/ath10k/htc.c | 16 +--
drivers/net/wireless/ath/ath10k/htt_rx.c | 2
drivers/net/wireless/ath/ath10k/htt_tx.c | 2
drivers/net/wireless/ath/ath10k/mac.c | 185 ++++++++++++++++--------------
drivers/net/wireless/ath/ath10k/pci.c | 6 +
drivers/net/wireless/ath/ath10k/wmi.h | 42 +++++++
10 files changed, 197 insertions(+), 120 deletions(-)
^ permalink raw reply
* RTL8192CU continually reconnecting
From: Timothy Rundle @ 2013-09-08 11:53 UTC (permalink / raw)
To: linux-wireless
My TL-WN821N with a RTL8192CU chipsets fails to stay connected. It
appears to be disconnecting every 5-10 seconds. Since the issue
happens with the mainline kernel, the downstream maintainer ask me to
post here. Here is a section of my kernel log:
Sep 6 22:37:34 james kernel: [ 247.725230] wlan1: Connection to AP
00:0f:b3:a4:6c:5f lost
Sep 6 22:37:34 james kernel: [ 247.764266] cfg80211: Calling CRDA to
update world regulatory domain
Sep 6 22:37:34 james kernel: [ 247.770264] cfg80211: World
regulatory domain updated:
Sep 6 22:37:34 james kernel: [ 247.770269] cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 6 22:37:34 james kernel: [ 247.770272] cfg80211: (2402000 KHz
- 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 6 22:37:34 james kernel: [ 247.770275] cfg80211: (2457000 KHz
- 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 6 22:37:34 james kernel: [ 247.770277] cfg80211: (2474000 KHz
- 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 6 22:37:34 james kernel: [ 247.770279] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 6 22:37:34 james kernel: [ 247.770281] cfg80211: (5735000 KHz
- 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 6 22:37:34 james kernel: [ 247.861375] wlan1: authenticate with
00:0f:b3:a4:6c:5f
Sep 6 22:37:34 james kernel: [ 247.862182] wlan1: send auth to
00:0f:b3:a4:6c:5f (try 1/3)
Sep 6 22:37:35 james kernel: [ 247.964206] wlan1: send auth to
00:0f:b3:a4:6c:5f (try 2/3)
Sep 6 22:37:35 james kernel: [ 248.068278] wlan1: send auth to
00:0f:b3:a4:6c:5f (try 3/3)
Sep 6 22:37:35 james kernel: [ 248.172349] wlan1: authentication
with 00:0f:b3:a4:6c:5f timed out
Sep 6 22:37:41 james kernel: [ 254.020841] wlan1: authenticate with
00:0f:b3:a4:6c:5f
Sep 6 22:37:41 james kernel: [ 254.022301] wlan1: send auth to
00:0f:b3:a4:6c:5f (try 1/3)
Sep 6 22:37:41 james kernel: [ 254.024112] wlan1: authenticated
Sep 6 22:37:41 james kernel: [ 254.024415] rtl8192cu 1-4:1.0 wlan1:
disabling HT/VHT due to WEP/TKIP use
Sep 6 22:37:41 james kernel: [ 254.024426] rtl8192cu 1-4:1.0 wlan1:
disabling HT as WMM/QoS is not supported by the AP
Sep 6 22:37:41 james kernel: [ 254.024433] rtl8192cu 1-4:1.0 wlan1:
disabling VHT as WMM/QoS is not supported by the AP
Sep 6 22:37:41 james kernel: [ 254.028075] wlan1: associate with
00:0f:b3:a4:6c:5f (try 1/3)
Sep 6 22:37:41 james kernel: [ 254.036872] wlan1: RX AssocResp from
00:0f:b3:a4:6c:5f (capab=0x471 status=0 aid=4)
Sep 6 22:37:41 james kernel: [ 254.036943] wlan1: associated
Sep 6 22:37:48 james kernel: [ 261.758279] wlan1: Connection to AP
00:0f:b3:a4:6c:5f lost
My configuration information is listed below. Additional logs and
configuration can be found at the downstream bug report [A]. The issue
appears to be similar to one already reported on the mailing list [B].
[A] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1220007
[B] http://www.spinics.net/lists/linux-wireless/msg111529.html
Keywords: networking, wireless, usb, RTL8192CU, realtek, TL-WN821N
timothy@james:~$ cat /proc/version
Linux version 3.11.0-999-generic (apw@gomeisa) (gcc version 4.6.3
(Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201309060427 SMP Fri Sep 6 08:28:59
UTC 2013
No Kernel oops
N/A
timothy@james:~$ lsb_release -rd
Description: Ubuntu Saucy Salamander (development branch)
Release: 13.10
timothy@james:/usr/src/linux-headers-3.11.0-999-generic/scripts$ sh ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux james 3.11.0-999-generic #201309060427 SMP Fri Sep 6 08:28:59
UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Gnu C 4.8
Gnu make 3.81
binutils 2.23.52.20130828
util-linux 2.20.1
mount support
module-init-tools 9
e2fsprogs 1.42.8
pcmciautils 018
PPP 2.4.5
Linux C Library 2.17
Dynamic linker (ldd) 2.17
Procps 3.3.3
Net-tools 1.60
Kbd 1.15.5
Sh-utils 8.20
wireless-tools 30
Modules Loaded nls_utf8 isofs autofs4 parport_pc ppdev lp
parport rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl nfs lockd
sunrpc fscache arc4 rtl8192cu rtl_usb rtlwifi rtl8192c_common mac80211
cfg80211 hid_generic uvcvideo usbhid videobuf2_vmalloc usb_storage
videobuf2_memops hid videobuf2_core snd_usb_audio videodev
snd_usbmidi_lib radeon snd_hda_codec_hdmi snd_hda_codec_via
snd_hda_intel kvm snd_hda_codec snd_hwdep snd_pcm snd_page_alloc
snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device
snd_timer ttm drm_kms_helper psmouse microcode snd drm sp5100_tco
edac_core serio_raw edac_mce_amd soundcore i2c_algo_bit i2c_piix4
k10temp asus_atk0110 mac_hid ohci_pci pata_acpi ahci r8169 pata_atiixp
libahci mii
timothy@james:~$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 945 Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit
wdt hw_pstate npt lbrv svm_lock nrip_save
bogomips : 6029.94
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 945 Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit
wdt hw_pstate npt lbrv svm_lock nrip_save
bogomips : 6029.94
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 945 Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit
wdt hw_pstate npt lbrv svm_lock nrip_save
bogomips : 6029.94
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 945 Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit
wdt hw_pstate npt lbrv svm_lock nrip_save
bogomips : 6029.94
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
timothy@james:~$ cat /proc/modules
nls_utf8 12557 1 - Live 0x0000000000000000
isofs 40272 1 - Live 0x0000000000000000
autofs4 39166 1 - Live 0x0000000000000000
parport_pc 32866 0 - Live 0x0000000000000000
ppdev 17711 0 - Live 0x0000000000000000
lp 17799 0 - Live 0x0000000000000000
parport 42481 3 parport_pc,ppdev,lp, Live 0x0000000000000000
rfcomm 74658 0 - Live 0x0000000000000000
bnep 23966 2 - Live 0x0000000000000000
bluetooth 391597 10 rfcomm,bnep, Live 0x0000000000000000
nfsd 283232 2 - Live 0x0000000000000000
auth_rpcgss 59255 1 nfsd, Live 0x0000000000000000
nfs_acl 12883 1 nfsd, Live 0x0000000000000000
nfs 183238 0 - Live 0x0000000000000000
lockd 94791 2 nfsd,nfs, Live 0x0000000000000000
sunrpc 273894 6 nfsd,auth_rpcgss,nfs_acl,nfs,lockd, Live 0x0000000000000000
fscache 54777 1 nfs, Live 0x0000000000000000
arc4 12573 2 - Live 0x0000000000000000
rtl8192cu 72806 0 - Live 0x0000000000000000
rtl_usb 18713 1 rtl8192cu, Live 0x0000000000000000
rtlwifi 64035 2 rtl8192cu,rtl_usb, Live 0x0000000000000000
rtl8192c_common 53827 1 rtl8192cu, Live 0x0000000000000000
mac80211 634607 3 rtl8192cu,rtl_usb,rtlwifi, Live 0x0000000000000000
cfg80211 504229 2 rtlwifi,mac80211, Live 0x0000000000000000
hid_generic 12548 0 - Live 0x0000000000000000
uvcvideo 82247 0 - Live 0x0000000000000000
usbhid 53378 0 - Live 0x0000000000000000
videobuf2_vmalloc 13216 1 uvcvideo, Live 0x0000000000000000
usb_storage 66714 0 - Live 0x0000000000000000
videobuf2_memops 13362 1 videobuf2_vmalloc, Live 0x0000000000000000
hid 105676 2 hid_generic,usbhid, Live 0x0000000000000000
videobuf2_core 40903 1 uvcvideo, Live 0x0000000000000000
snd_usb_audio 155972 1 - Live 0x0000000000000000
videodev 139144 2 uvcvideo,videobuf2_core, Live 0x0000000000000000
snd_usbmidi_lib 29576 1 snd_usb_audio, Live 0x0000000000000000
radeon 1518839 6 - Live 0x0000000000000000
snd_hda_codec_hdmi 41736 1 - Live 0x0000000000000000
snd_hda_codec_via 32006 1 - Live 0x0000000000000000
snd_hda_intel 57183 7 - Live 0x0000000000000000
kvm 457632 0 - Live 0x0000000000000000
snd_hda_codec 194881 3
snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel, Live
0x0000000000000000
snd_hwdep 13613 2 snd_usb_audio,snd_hda_codec, Live 0x0000000000000000
snd_pcm 107140 5
snd_usb_audio,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec, Live
0x0000000000000000
snd_page_alloc 18798 2 snd_hda_intel,snd_pcm, Live 0x0000000000000000
snd_seq_midi 13324 0 - Live 0x0000000000000000
snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000
snd_rawmidi 30465 2 snd_usbmidi_lib,snd_seq_midi, Live 0x0000000000000000
snd_seq 66061 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000
snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x0000000000000000
snd_timer 30038 2 snd_pcm,snd_seq, Live 0x0000000000000000
ttm 84599 1 radeon, Live 0x0000000000000000
drm_kms_helper 53165 1 radeon, Live 0x0000000000000000
psmouse 104113 0 - Live 0x0000000000000000
microcode 23650 0 - Live 0x0000000000000000
snd 73802 28 snd_usb_audio,snd_usbmidi_lib,snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_midi,snd_rawmidi,snd_seq,snd_seq_device,snd_timer,
Live 0x0000000000000000
drm 303157 8 radeon,ttm,drm_kms_helper, Live 0x0000000000000000
sp5100_tco 14114 0 - Live 0x0000000000000000
edac_core 62914 0 - Live 0x0000000000000000
serio_raw 13462 0 - Live 0x0000000000000000
edac_mce_amd 22792 0 - Live 0x0000000000000000
soundcore 12680 1 snd, Live 0x0000000000000000
i2c_algo_bit 13564 1 radeon, Live 0x0000000000000000
i2c_piix4 22299 0 - Live 0x0000000000000000
k10temp 13173 0 - Live 0x0000000000000000
asus_atk0110 19210 0 - Live 0x0000000000000000
mac_hid 13253 0 - Live 0x0000000000000000
ohci_pci 13561 0 - Live 0x0000000000000000
pata_acpi 13038 0 - Live 0x0000000000000000
ahci 30063 3 - Live 0x0000000000000000
r8169 73111 0 - Live 0x0000000000000000
pata_atiixp 13242 1 - Live 0x0000000000000000
libahci 32088 1 ahci, Live 0x0000000000000000
mii 13981 1 r8169, Live 0x0000000000000000
timothy@james:~$ cat /proc/ioports
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:14.1
0170-0177 : pata_atiixp
01f0-01f7 : 0000:00:14.1
01f0-01f7 : pata_atiixp
0230-023f : pnp 00:08
0290-029f : pnp 00:08
0300-030f : pnp 00:08
0376-0376 : 0000:00:14.1
0376-0376 : pata_atiixp
03c0-03df : vga+
03f6-03f6 : 0000:00:14.1
03f6-03f6 : pata_atiixp
040b-040b : pnp 00:07
04d0-04d1 : pnp 00:07
04d6-04d6 : pnp 00:07
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-0827 : ACPI GPE0_BLK
08ff-08ff : ACPI PM2_CNT_BLK
0900-090f : pnp 00:07
0910-091f : pnp 00:07
0a30-0a3f : pnp 00:08
0b00-0b3f : pnp 00:07
0b00-0b07 : piix4_smbus
0b20-0b2f : pnp 00:07
0b20-0b27 : piix4_smbus
0c00-0c01 : pnp 00:07
0c14-0c14 : pnp 00:07
0c50-0c51 : pnp 00:07
0c52-0c52 : pnp 00:07
0c6c-0c6c : pnp 00:07
0c6f-0c6f : pnp 00:07
0cd0-0cd1 : pnp 00:07
0cd2-0cd3 : pnp 00:07
0cd4-0cd5 : pnp 00:07
0cd6-0cd7 : pnp 00:07
0cd8-0cdf : pnp 00:07
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
8000-800f : 0000:00:11.0
8000-800f : ahci
9000-9003 : 0000:00:11.0
9000-9003 : ahci
a000-a007 : 0000:00:11.0
a000-a007 : ahci
b000-b003 : 0000:00:11.0
b000-b003 : ahci
c000-c007 : 0000:00:11.0
c000-c007 : ahci
d000-dfff : PCI Bus 0000:01
d000-d0ff : 0000:01:00.0
e000-efff : PCI Bus 0000:02
e800-e8ff : 0000:02:00.0
e800-e8ff : r8169
fe00-fefe : pnp 00:07
ff00-ff0f : 0000:00:14.1
ff00-ff0f : pata_atiixp
timothy@james:~$ cat /proc/iomem
00000000-00000fff : reserved
00001000-0009ebff : System RAM
0009ec00-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000cf3ff : Video ROM
000d0000-000dffff : PCI Bus 0000:00
000e4000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-cff7ffff : System RAM
01000000-01753583 : Kernel code
01753584-01d1807f : Kernel data
01e70000-01fe2fff : Kernel bss
c4000000-c7ffffff : GART
cff80000-cff8dfff : ACPI Tables
cff8e000-cffcffff : ACPI Non-volatile Storage
cffd0000-cfffffff : reserved
d0000000-dfffffff : PCI Bus 0000:00
d0000000-dfffffff : PCI Bus 0000:01
d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
e0000000-efffffff : pnp 00:09
f0000000-fed44fff : PCI Bus 0000:00
faf00000-faffffff : PCI Bus 0000:02
faff0000-faffffff : 0000:02:00.0
faff0000-faffffff : r8169
fbdf4000-fbdf7fff : 0000:00:14.2
fbdf4000-fbdf7fff : ICH HD audio
fbdf9000-fbdf9fff : 0000:00:14.5
fbdf9000-fbdf9fff : ohci_hcd
fbdfa800-fbdfa8ff : 0000:00:13.2
fbdfa800-fbdfa8ff : ehci_hcd
fbdfb000-fbdfbfff : 0000:00:13.1
fbdfb000-fbdfbfff : ohci_hcd
fbdfc000-fbdfcfff : 0000:00:13.0
fbdfc000-fbdfcfff : ohci_hcd
fbdfd000-fbdfdfff : 0000:00:12.1
fbdfd000-fbdfdfff : ohci_hcd
fbdfe000-fbdfefff : 0000:00:12.0
fbdfe000-fbdfefff : ohci_hcd
fbdff000-fbdff0ff : 0000:00:12.2
fbdff000-fbdff0ff : ehci_hcd
fbdff800-fbdffbff : 0000:00:11.0
fbdff800-fbdffbff : ahci
fbe00000-fbefffff : PCI Bus 0000:01
fbec0000-fbedffff : 0000:01:00.0
fbeec000-fbeeffff : 0000:01:00.1
fbeec000-fbeeffff : ICH HD audio
fbef0000-fbefffff : 0000:01:00.0
fbf00000-fbffffff : PCI Bus 0000:02
fbfc0000-fbfdffff : 0000:02:00.0
fbfff000-fbffffff : 0000:02:00.0
fbfff000-fbffffff : r8169
fec00000-fec003ff : IOAPIC 0
fec10000-fec1001f : pnp 00:07
fed00000-fed003ff : HPET 2
fed40000-fed44fff : pnp 00:07
fee00000-fee00fff : Local APIC
fee00000-fee00fff : pnp 00:06
ff700000-ffffffff : reserved
ffb80000-ffbfffff : pnp 00:07
100000000-12fffffff : System RAM
sudo lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
Subsystem: ASUSTeK Computer Inc. Device 82ee
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
IsocEn+ LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn-
LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+
800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz-
800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF-
RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to
PCI bridge (ext gfx port 0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt+
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4181
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 82ee
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to
PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4191
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 82ee
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fbdff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbdfe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
USB OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbdfd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbdff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbdfc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
USB OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbdfb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fbdfa800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller (rev 3a)
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort- >SERR- <PERR- INTx-
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: pata_atiixp
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00
Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 82ea
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbdf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 LPC host controller
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI
to PCI Bridge (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbdf9000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor HyperTransport Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
IsocEn+ LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: [b]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+
800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h
Processor Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] RV710 [Radeon HD 4350/4550] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. R4350 MD512H (MS-V161)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41d1
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: radeon
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730
HDMI Audio [Radeon HD 4000 series]
Subsystem: Micro-Star International Co., Ltd. Device aa38
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at fbeec000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41c1
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fbfff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at faff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbfc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41a1
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-00-00-ec-10-68-81
Kernel driver in use: r8169
timothy@james:~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: DVDRAM GH22NS50 Rev: TN02
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: WDC WD5000AAKS-0 Rev: 05.0
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: Generic Model: USB SD Reader Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
Host: scsi6 Channel: 00 Id: 00 Lun: 01
Vendor: Generic Model: USB CF Reader Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 00
Host: scsi6 Channel: 00 Id: 00 Lun: 02
Vendor: Generic Model: USB xD/SM Reader Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 00
Host: scsi6 Channel: 00 Id: 00 Lun: 03
Vendor: Generic Model: USB MS Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 00
[7.7] timothy@james:~$ ls /proc
1 1668 1993 2284 28 397 681 acpi meminfo
10 167 1994 2288 2833 40 693 asound misc
1065 168 1995 2293 2890 403 695 buddyinfo modules
11 17 2 2298 29 41 7 bus mounts
1162 1795 20 23 2904 42 709 cgroups mtrr
1171 1797 2019 2300 294 43 716 cmdline net
1195 18 2023 2305 299 432 72 consoles pagetypeinfo
12 1864 2058 2306 3 433 721 cpuinfo partitions
1202 1866 2076 2312 30 436 738 crypto sched_debug
1207 1888 2078 2321 3002 44 754 devices schedstat
1213 1892 21 2352 3005 45 785 diskstats scsi
1233 19 2102 2387 3007 46 786 dma self
1237 1904 2110 2388 3018 466 788 driver slabinfo
1250 1911 2115 24 31 47 791 execdomains softirqs
13 1912 2118 2445 3195 48 8 fb stat
1301 1917 22 2451 3199 49 810 filesystems swaps
1316 1918 2217 2468 32 493 859 fs sys
1330 1922 2219 2477 3217 5 866 interrupts sysrq-trigger
1379 1926 2220 2487 3223 50 868 iomem sysvipc
14 1930 2221 25 3252 51 892 ioports timer_list
143 1946 2229 2506 3289 52 893 irq timer_stats
145 1948 2231 2511 3298 53 896 kallsyms tty
147 1949 2232 2535 33 54 9 kcore uptime
149 1957 2239 2543 34 545 91 key-users version
15 1977 2240 2544 35 55 914 kmsg vmallocinfo
150 1979 2241 26 361 56 92 kpagecount vmstat
151 1981 2255 2682 368 57 922 kpageflags zoneinfo
152 1985 2259 27 37 6 946 latency_stats
153 1987 2261 2709 38 629 964 loadavg
154 1990 2265 2762 39 630 969 locks
16 1992 228 2775 391 68 970 mdstat
sudo lsusb -vvv
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.11
iManufacturer 3 Linux 3.11.0-999-generic ohci_hcd
iProduct 2 OHCI PCI host controller
iSerial 1 0000:00:14.5
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 002 Device 002: ID 18e3:9102 Fitipower Integrated Technology Inc
Multi Card Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x18e3 Fitipower Integrated Technology Inc
idProduct 0x9102 Multi Card Reader
bcdDevice 1.00
iManufacturer 1 Generic
iProduct 2 Mass Storage Device
iSerial 3 18E3312D81B
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.11
iManufacturer 3 Linux 3.11.0-999-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:13.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.11
iManufacturer 3 Linux 3.11.0-999-generic ohci_hcd
iProduct 2 OHCI PCI host controller
iSerial 1 0000:00:13.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.11
iManufacturer 3 Linux 3.11.0-999-generic ohci_hcd
iProduct 2 OHCI PCI host controller
iSerial 1 0000:00:13.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 005: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU
802.11n WLAN Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x8178 RTL8192CU 802.11n WLAN Adapter
bcdDevice 2.00
iManufacturer 1 802.11n
iProduct 2 USB WLAN
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 002: ID 046d:0808 Logitech, Inc. Webcam C600
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0x0808 Webcam C600
bcdDevice 0.09
iManufacturer 0
iProduct 0
iSerial 2 78AA4F60
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 2561
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 14 Video
bFunctionSubClass 3 Video Interface Collection
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 1 Video Control
bInterfaceProtocol 0
iInterface 0
VideoControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdUVC 1.00
wTotalLength 217
dwClockFrequency 48.000000MHz
bInCollection 1
baInterfaceNr( 0) 1
VideoControl Interface Descriptor:
bLength 18
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Camera Sensor
bAssocTerminal 0
iTerminal 0
wObjectiveFocalLengthMin 0
wObjectiveFocalLengthMax 0
wOcularFocalLength 0
bControlSize 3
bmControls 0x0004080e
Auto-Exposure Mode
Auto-Exposure Priority
Exposure Time (Absolute)
PanTilt (Absolute)
Privacy
VideoControl Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 5 (PROCESSING_UNIT)
Warning: Descriptor too short
bUnitID 2
bSourceID 1
wMaxMultiplier 16384
bControlSize 2
bmControls 0x0000175b
Brightness
Contrast
Saturation
Sharpness
White Balance Temperature
Backlight Compensation
Gain
Power Line Frequency
White Balance Temperature, Auto
iProcessing 0
bmVideoStandards 0x1b
None
NTSC - 525/60
SECAM - 625/50
NTSC - 625/50
VideoControl Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 4
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221e}
bNumControl 10
bNrPins 1
baSourceID( 0) 2
bControlSize 2
bmControls( 0) 0xff
bmControls( 1) 0x03
iExtension 0
VideoControl Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 13
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221f}
bNumControl 7
bNrPins 1
baSourceID( 0) 2
bControlSize 2
bmControls( 0) 0x6f
bmControls( 1) 0x01
iExtension 0
VideoControl Interface Descriptor:
bLength 28
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 8
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d2251}
bNumControl 3
bNrPins 1
baSourceID( 0) 4
bControlSize 3
bmControls( 0) 0x19
bmControls( 1) 0x00
bmControls( 2) 0x00
iExtension 0
VideoControl Interface Descriptor:
bLength 28
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 10
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d2252}
bNumControl 24
bNrPins 1
baSourceID( 0) 4
bControlSize 3
bmControls( 0) 0xff
bmControls( 1) 0xff
bmControls( 2) 0xff
iExtension 0
VideoControl Interface Descriptor:
bLength 28
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 14
guidExtensionCode {b7935ba4-15c7-0245-90f4-532a3b311365}
bNumControl 4
bNrPins 1
baSourceID( 0) 1
bControlSize 3
bmControls( 0) 0x0f
bmControls( 1) 0x00
bmControls( 2) 0x00
iExtension 0
VideoControl Interface Descriptor:
bLength 28
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 12
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d2250}
bNumControl 17
bNrPins 1
baSourceID( 0) 4
bControlSize 3
bmControls( 0) 0xfe
bmControls( 1) 0x7f
bmControls( 2) 0x70
iExtension 0
VideoControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 5
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 4
iTerminal 0
** UNRECOGNIZED: 20 41 01 0b 82 06 61 63 70 50 ab 49 b8 cc b3
85 5e 8d 22 55 01 01 04 03 01 00 00 00 00 00 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
VideoStreaming Interface Descriptor:
bLength 16
bDescriptorType 36
bDescriptorSubtype 1 (INPUT_HEADER)
bNumFormats 3
wTotalLength 1852
bEndPointAddress 129
bmInfo 0
bTerminalLink 5
bStillCaptureMethod 2
bTriggerSupport 1
bTriggerUsage 0
bControlSize 1
bmaControls( 0) 27
bmaControls( 1) 27
bmaControls( 2) 27
VideoStreaming Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED)
bFormatIndex 1
bNumFrameDescriptors 18
guidFormat
{59555932-0000-1000-8000-00aa00389b71}
bBitsPerPixel 16
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 2 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 1
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 480
dwMinBitRate 24576000
dwMaxBitRate 147456000
dwMaxVideoFrameBufferSize 614400
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 2
bmCapabilities 0x00
Still image unsupported
wWidth 160
wHeight 120
dwMinBitRate 1536000
dwMaxBitRate 9216000
dwMaxVideoFrameBufferSize 38400
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 3
bmCapabilities 0x00
Still image unsupported
wWidth 176
wHeight 144
dwMinBitRate 2027520
dwMaxBitRate 12165120
dwMaxVideoFrameBufferSize 50688
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 4
bmCapabilities 0x00
Still image unsupported
wWidth 320
wHeight 240
dwMinBitRate 6144000
dwMaxBitRate 36864000
dwMaxVideoFrameBufferSize 153600
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 5
bmCapabilities 0x00
Still image unsupported
wWidth 352
wHeight 288
dwMinBitRate 8110080
dwMaxBitRate 48660480
dwMaxVideoFrameBufferSize 202752
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 6
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 360
dwMinBitRate 18432000
dwMaxBitRate 110592000
dwMaxVideoFrameBufferSize 460800
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 7
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 400
dwMinBitRate 20480000
dwMaxBitRate 122880000
dwMaxVideoFrameBufferSize 512000
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 46
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 8
bmCapabilities 0x00
Still image unsupported
wWidth 768
wHeight 480
dwMinBitRate 29491200
dwMaxBitRate 147456000
dwMaxVideoFrameBufferSize 737280
dwDefaultFrameInterval 400000
bFrameIntervalType 5
dwFrameInterval( 0) 400000
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 666666
dwFrameInterval( 3) 1000000
dwFrameInterval( 4) 2000000
VideoStreaming Interface Descriptor:
bLength 46
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 9
bmCapabilities 0x00
Still image unsupported
wWidth 800
wHeight 456
dwMinBitRate 29184000
dwMaxBitRate 145920000
dwMaxVideoFrameBufferSize 729600
dwDefaultFrameInterval 400000
bFrameIntervalType 5
dwFrameInterval( 0) 400000
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 666666
dwFrameInterval( 3) 1000000
dwFrameInterval( 4) 2000000
VideoStreaming Interface Descriptor:
bLength 46
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 10
bmCapabilities 0x00
Still image unsupported
wWidth 800
wHeight 504
dwMinBitRate 32256000
dwMaxBitRate 161280000
dwMaxVideoFrameBufferSize 806400
dwDefaultFrameInterval 400000
bFrameIntervalType 5
dwFrameInterval( 0) 400000
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 666666
dwFrameInterval( 3) 1000000
dwFrameInterval( 4) 2000000
VideoStreaming Interface Descriptor:
bLength 46
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 11
bmCapabilities 0x00
Still image unsupported
wWidth 800
wHeight 600
dwMinBitRate 38400000
dwMaxBitRate 192000000
dwMaxVideoFrameBufferSize 960000
dwDefaultFrameInterval 400000
bFrameIntervalType 5
dwFrameInterval( 0) 400000
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 666666
dwFrameInterval( 3) 1000000
dwFrameInterval( 4) 2000000
VideoStreaming Interface Descriptor:
bLength 46
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 12
bmCapabilities 0x00
Still image unsupported
wWidth 864
wHeight 480
dwMinBitRate 33177600
dwMaxBitRate 165888000
dwMaxVideoFrameBufferSize 829440
dwDefaultFrameInterval 400000
bFrameIntervalType 5
dwFrameInterval( 0) 400000
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 666666
dwFrameInterval( 3) 1000000
dwFrameInterval( 4) 2000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 13
bmCapabilities 0x00
Still image unsupported
wWidth 960
wHeight 720
dwMinBitRate 55296000
dwMaxBitRate 165888000
dwMaxVideoFrameBufferSize 1382400
dwDefaultFrameInterval 1000000
bFrameIntervalType 3
dwFrameInterval( 0) 666666
dwFrameInterval( 1) 1000000
dwFrameInterval( 2) 2000000
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 14
bmCapabilities 0x00
Still image unsupported
wWidth 1280
wHeight 720
dwMinBitRate 73728000
dwMaxBitRate 147456000
dwMaxVideoFrameBufferSize 1843200
dwDefaultFrameInterval 2000000
bFrameIntervalType 2
dwFrameInterval( 0) 1333333
dwFrameInterval( 1) 2000000
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 15
bmCapabilities 0x00
Still image unsupported
wWidth 1280
wHeight 800
dwMinBitRate 81920000
dwMaxBitRate 163840000
dwMaxVideoFrameBufferSize 2048000
dwDefaultFrameInterval 2000000
bFrameIntervalType 2
dwFrameInterval( 0) 1333333
dwFrameInterval( 1) 2000000
VideoStreaming Interface Descriptor:
bLength 30
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 16
bmCapabilities 0x00
Still image unsupported
wWidth 1600
wHeight 904
dwMinBitRate 115712000
dwMaxBitRate 115712000
dwMaxVideoFrameBufferSize 2892800
dwDefaultFrameInterval 2000000
bFrameIntervalType 1
dwFrameInterval( 0) 2000000
VideoStreaming Interface Descriptor:
bLength 30
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 17
bmCapabilities 0x00
Still image unsupported
wWidth 1600
wHeight 1000
dwMinBitRate 128000000
dwMaxBitRate 128000000
dwMaxVideoFrameBufferSize 3200000
dwDefaultFrameInterval 2000000
bFrameIntervalType 1
dwFrameInterval( 0) 2000000
VideoStreaming Interface Descriptor:
bLength 30
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 18
bmCapabilities 0x00
Still image unsupported
wWidth 1600
wHeight 1200
dwMinBitRate 153600000
dwMaxBitRate 153600000
dwMaxVideoFrameBufferSize 3840000
dwDefaultFrameInterval 2000000
bFrameIntervalType 1
dwFrameInterval( 0) 2000000
VideoStreaming Interface Descriptor:
bLength 79
bDescriptorType 36
bDescriptorSubtype 3 (STILL_IMAGE_FRAME)
bEndpointAddress 0
bNumImageSizePatterns 18
wWidth( 0) 640
wHeight( 0) 480
wWidth( 1) 160
wHeight( 1) 120
wWidth( 2) 176
wHeight( 2) 144
wWidth( 3) 320
wHeight( 3) 240
wWidth( 4) 352
wHeight( 4) 288
wWidth( 5) 640
wHeight( 5) 360
wWidth( 6) 640
wHeight( 6) 400
wWidth( 7) 768
wHeight( 7) 480
wWidth( 8) 800
wHeight( 8) 456
wWidth( 9) 800
wHeight( 9) 504
wWidth(10) 800
wHeight(10) 600
wWidth(11) 864
wHeight(11) 480
wWidth(12) 960
wHeight(12) 720
wWidth(13) 1280
wHeight(13) 720
wWidth(14) 1280
wHeight(14) 800
wWidth(15) 1600
wHeight(15) 904
wWidth(16) 1600
wHeight(16) 1000
wWidth(17) 1600
wHeight(17) 1200
bNumCompressionPatterns 18
bCompression( 0) 5
VideoStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 13 (COLORFORMAT)
bColorPrimaries 1 (BT.709,sRGB)
bTransferCharacteristics 1 (BT.709)
bMatrixCoefficients 4 (SMPTE 170M (BT.601))
VideoStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 6 (FORMAT_MJPEG)
bFormatIndex 2
bNumFrameDescriptors 18
bFlags 1
Fixed-size samples: Yes
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 1 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 1
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 480
dwMinBitRate 24576000
dwMaxBitRate 147456000
dwMaxVideoFrameBufferSize 614400
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 2
bmCapabilities 0x00
Still image unsupported
wWidth 160
wHeight 120
dwMinBitRate 1536000
dwMaxBitRate 9216000
dwMaxVideoFrameBufferSize 38400
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 3
bmCapabilities 0x00
Still image unsupported
wWidth 176
wHeight 144
dwMinBitRate 2027520
dwMaxBitRate 12165120
dwMaxVideoFrameBufferSize 50688
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 4
bmCapabilities 0x00
Still image unsupported
wWidth 320
wHeight 240
dwMinBitRate 6144000
dwMaxBitRate 36864000
dwMaxVideoFrameBufferSize 153600
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 5
bmCapabilities 0x00
Still image unsupported
wWidth 352
wHeight 288
dwMinBitRate 8110080
dwMaxBitRate 48660480
dwMaxVideoFrameBufferSize 202752
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 6
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 360
dwMinBitRate 18432000
dwMaxBitRate 110592000
dwMaxVideoFrameBufferSize 460800
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 7
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 400
dwMinBitRate 20480000
dwMaxBitRate 122880000
dwMaxVideoFrameBufferSize 512000
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 8
bmCapabilities 0x00
Still image unsupported
wWidth 768
wHeight 480
dwMinBitRate 29491200
dwMaxBitRate 176947200
dwMaxVideoFrameBufferSize 737280
dwDefaultFrameInterval 333333
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 9
bmCapabilities 0x00
Still image unsupported
wWidth 800
wHeight 456
dwMinBitRate 29184000
dwMaxBitRate 175104000
dwMaxVideoFrameBufferSize 729600
dwDefaultFrameInterval 666666
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 10
bmCapabilities 0x00
Still image unsupported
wWidth 800
wHeight 504
dwMinBitRate 32256000
dwMaxBitRate 193536000
dwMaxVideoFrameBufferSize 806400
dwDefaultFrameInterval 666666
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 11
bmCapabilities 0x00
Still image unsupported
wWidth 800
wHeight 600
dwMinBitRate 38400000
dwMaxBitRate 230400000
dwMaxVideoFrameBufferSize 960000
dwDefaultFrameInterval 666666
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 12
bmCapabilities 0x00
Still image unsupported
wWidth 864
wHeight 480
dwMinBitRate 33177600
dwMaxBitRate 199065600
dwMaxVideoFrameBufferSize 829440
dwDefaultFrameInterval 666666
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 13
bmCapabilities 0x00
Still image unsupported
wWidth 960
wHeight 720
dwMinBitRate 55296000
dwMaxBitRate 331776000
dwMaxVideoFrameBufferSize 1382400
dwDefaultFrameInterval 1000000
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 50
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 14
bmCapabilities 0x00
Still image unsupported
wWidth 1280
wHeight 720
dwMinBitRate 73728000
dwMaxBitRate 442368000
dwMaxVideoFrameBufferSize 1843200
dwDefaultFrameInterval 1000000
bFrameIntervalType 6
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 400000
dwFrameInterval( 2) 500000
dwFrameInterval( 3) 666666
dwFrameInterval( 4) 1000000
dwFrameInterval( 5) 2000000
VideoStreaming Interface Descriptor:
bLength 46
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 15
bmCapabilities 0x00
Still image unsupported
wWidth 1280
wHeight 800
dwMinBitRate 81920000
dwMaxBitRate 409600000
dwMaxVideoFrameBufferSize 2048000
dwDefaultFrameInterval 1000000
bFrameIntervalType 5
dwFrameInterval( 0) 400000
dwFrameInterval( 1) 500000
dwFrameInterval( 2) 666666
dwFrameInterval( 3) 1000000
dwFrameInterval( 4) 2000000
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 16
bmCapabilities 0x00
Still image unsupported
wWidth 1600
wHeight 904
dwMinBitRate 115712000
dwMaxBitRate 231424000
dwMaxVideoFrameBufferSize 2892800
dwDefaultFrameInterval 1000000
bFrameIntervalType 2
dwFrameInterval( 0) 1000000
dwFrameInterval( 1) 2000000
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 17
bmCapabilities 0x00
Still image unsupported
wWidth 1600
wHeight 1000
dwMinBitRate 128000000
dwMaxBitRate 256000000
dwMaxVideoFrameBufferSize 3200000
dwDefaultFrameInterval 1000000
bFrameIntervalType 2
dwFrameInterval( 0) 1000000
dwFrameInterval( 1) 2000000
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 18
bmCapabilities 0x00
Still image unsupported
wWidth 1600
wHeight 1200
dwMinBitRate 153600000
dwMaxBitRate 307200000
dwMaxVideoFrameBufferSize 3840000
dwDefaultFrameInterval 2000000
bFrameIntervalType 2
dwFrameInterval( 0) 1000000
dwFrameInterval( 1) 2000000
VideoStreaming Interface Descriptor:
bLength 83
bDescriptorType 36
bDescriptorSubtype 3 (STILL_IMAGE_FRAME)
bEndpointAddress 0
bNumImageSizePatterns 18
wWidth( 0) 640
wHeight( 0) 480
wWidth( 1) 160
wHeight( 1) 120
wWidth( 2) 176
wHeight( 2) 144
wWidth( 3) 320
wHeight( 3) 240
wWidth( 4) 352
wHeight( 4) 288
wWidth( 5) 640
wHeight( 5) 360
wWidth( 6) 640
wHeight( 6) 400
wWidth( 7) 768
wHeight( 7) 480
wWidth( 8) 800
wHeight( 8) 456
wWidth( 9) 800
wHeight( 9) 504
wWidth(10) 800
wHeight(10) 600
wWidth(11) 864
wHeight(11) 480
wWidth(12) 960
wHeight(12) 720
wWidth(13) 1280
wHeight(13) 720
wWidth(14) 1280
wHeight(14) 800
wWidth(15) 1600
wHeight(15) 904
wWidth(16) 1600
wHeight(16) 1000
wWidth(17) 1600
wHeight(17) 1200
bNumCompressionPatterns 18
bCompression( 0) 5
bCompression( 1) 10
bCompression( 2) 15
bCompression( 3) 20
bCompression( 4) 25
VideoStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 13 (COLORFORMAT)
bColorPrimaries 1 (BT.709,sRGB)
bTransferCharacteristics 1 (BT.709)
bMatrixCoefficients 4 (SMPTE 170M (BT.601))
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x00c0 1x 192 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0180 1x 384 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0280 1x 640 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0320 1x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 6
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x03b0 1x 944 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 7
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0a80 2x 640 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 8
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0b20 2x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 9
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0be0 2x 992 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 10
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1380 3x 896 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 11
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x13fc 3x 1020 bytes
bInterval 1
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 1 Audio
bFunctionSubClass 2 Streaming
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 38
bInCollection 1
baInterfaceNr( 0) 3
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Microphone
bAssocTerminal 0
bNrChannels 1
wChannelConfig 0x0000
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 3
wTerminalType 0x0101 USB Streaming
bAssocTerminal 1
bSourceID 5
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 5
bSourceID 1
bControlSize 1
bmaControls( 0) 0x03
Mute Control
Volume Control
bmaControls( 1) 0x00
iFeature 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 16000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0044 1x 68 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 24000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0064 1x 100 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 32000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0084 1x 132 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.11
iManufacturer 3 Linux 3.11.0-999-generic ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:12.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0503 highspeed power enable connect
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.11
iManufacturer 3 Linux 3.11.0-999-generic ohci_hcd
iProduct 2 OHCI PCI host controller
iSerial 1 0000:00:12.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 003 Device 003: ID 046d:c040 Logitech, Inc. Corded Tilt-Wheel Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc040 Corded Tilt-Wheel Mouse
bcdDevice 24.30
iManufacturer 1 Logitech
iProduct 2 USB-PS/2 Optical Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 59
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0005 1x 5 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 003 Device 002: ID 046d:c313 Logitech, Inc. Internet 350 Keyboard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc313 Internet 350 Keyboard
bcdDevice 1.01
iManufacturer 1 LITEON Technology
iProduct 2 USB Multimedia Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 70mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 24
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 44
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.11
iManufacturer 3 Linux 3.11.0-999-generic ohci_hcd
iProduct 2 OHCI PCI host controller
iSerial 1 0000:00:12.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0303 lowspeed power enable connect
Port 3: 0000.0303 lowspeed power enable connect
Device Status: 0x0001
Self Powered
^ permalink raw reply
* [PATCH v3] mac80211: fix the setting of extended supported rate IE
From: Chun-Yeow Yeoh @ 2013-09-08 6:40 UTC (permalink / raw)
To: linux-wireless
Cc: johannes, linville, devel, distro11s, Chun-Yeow Yeoh,
Colleen Twitty
The patch "mac80211: select and adjust bitrates according to
channel mode" causes regression and breaks the extended supported rate
IE setting. Since "i" is starting with 8, so this is not necessary
to introduce "skip" here.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Colleen Twitty <colleen@cozybit.com>
Reviewed-by: Jason Abele <jason@cozybit.com>
---
v2: remove skip checking (Jason)
v3: remove skip variable (Thomas)
net/mac80211/util.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 3c8283b..aa6d6cc 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2100,7 +2100,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
- int rate, skip, shift;
+ int rate, shift;
u8 i, exrates, *pos;
u32 basic_rates = sdata->vif.bss_conf.basic_rates;
u32 rate_flags;
@@ -2128,14 +2128,11 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
pos = skb_put(skb, exrates + 2);
*pos++ = WLAN_EID_EXT_SUPP_RATES;
*pos++ = exrates;
- skip = 0;
for (i = 8; i < sband->n_bitrates; i++) {
u8 basic = 0;
if ((rate_flags & sband->bitrates[i].flags)
!= rate_flags)
continue;
- if (skip++ < 8)
- continue;
if (need_basic && basic_rates & BIT(i))
basic = 0x80;
rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
--
1.7.9.5
^ permalink raw reply related
* Re: [PATCH] cfg80211: Pass station supported channel and oper class info to kernel
From: Sunil Dutt @ 2013-09-08 6:32 UTC (permalink / raw)
To: Sunil Dutt; +Cc: Johannes Berg, linux-wireless, j, Deepak (QCA), Ashwani
In-Reply-To: <1377582278-3768-1-git-send-email-c_duttus@qti.qualcomm.com>
Hi Johannes,
Can you please help in reviewing the patch and upstream the same.
Regards,
Sunil
On Tue, Aug 27, 2013 at 11:14 AM, Sunil Dutt <c_duttus@qti.qualcomm.com> wrote:
> The information of the peer's supported channels and supported operating
> classes are required for the driver to perform TDLS off channel
> operations. This commit enhances the function nl80211_(new)set_station
> to pass this information of the peer to the driver.
>
> Signed-off-by: Sunil Dutt <c_duttus@qti.qualcomm.com>
> ---
> include/net/cfg80211.h | 8 ++++++++
> include/uapi/linux/nl80211.h | 9 +++++++++
> net/wireless/nl80211.c | 30 ++++++++++++++++++++++++++++++
> 3 files changed, 47 insertions(+)
>
> diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
> index 9ab7a06..81889ca 100644
> --- a/include/net/cfg80211.h
> +++ b/include/net/cfg80211.h
> @@ -735,6 +735,10 @@ enum station_parameters_apply_mask {
> * @capability: station capability
> * @ext_capab: extended capabilities of the station
> * @ext_capab_len: number of extended capabilities
> + * @supported_channels: supported channels in IEEE 802.11 format
> + * @supported_channels_len: number of supported channels
> + * @supported_oper_classes: supported oper classes in IEEE 802.11 format
> + * @supported_oper_classes_len: number of supported operating classes
> */
> struct station_parameters {
> const u8 *supported_rates;
> @@ -754,6 +758,10 @@ struct station_parameters {
> u16 capability;
> const u8 *ext_capab;
> u8 ext_capab_len;
> + const u8 *supported_channels;
> + u8 supported_channels_len;
> + const u8 *supported_oper_classes;
> + u8 supported_oper_classes_len;
> };
>
> /**
> diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
> index 1f42bc3..61a21a4 100644
> --- a/include/uapi/linux/nl80211.h
> +++ b/include/uapi/linux/nl80211.h
> @@ -1493,6 +1493,11 @@ enum nl80211_commands {
> * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
> * field in the probe response (%NL80211_ATTR_PROBE_RESP).
> *
> + * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels.
> + *
> + * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported
> + * supported operating classes.
> + *
> * @NL80211_ATTR_MAX: highest attribute number currently defined
> * @__NL80211_ATTR_AFTER_LAST: internal use
> */
> @@ -1801,6 +1806,10 @@ enum nl80211_attrs {
> NL80211_ATTR_CSA_C_OFF_BEACON,
> NL80211_ATTR_CSA_C_OFF_PRESP,
>
> + NL80211_ATTR_STA_SUPPORTED_CHANNELS,
> +
> + NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES,
> +
> /* add attributes here, update the policy in nl80211.c */
>
> __NL80211_ATTR_AFTER_LAST,
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index 741368c..0765b9a 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -354,6 +354,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
> [NL80211_ATTR_CSA_IES] = { .type = NLA_NESTED },
> [NL80211_ATTR_CSA_C_OFF_BEACON] = { .type = NLA_U16 },
> [NL80211_ATTR_CSA_C_OFF_PRESP] = { .type = NLA_U16 },
> + [NL80211_ATTR_STA_SUPPORTED_CHANNELS] = { .type = NLA_BINARY },
> + [NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES] = { .type = NLA_BINARY },
> };
>
> /* policy for the key attributes */
> @@ -3909,6 +3911,20 @@ static int nl80211_set_station_tdls(struct genl_info *info,
> params->vht_capa =
> nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]);
>
> + if (info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]) {
> + params->supported_channels =
> + nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]);
> + params->supported_channels_len =
> + nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]);
> + }
> +
> + if (info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]) {
> + params->supported_oper_classes =
> + nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]);
> + params->supported_oper_classes_len =
> + nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]);
> + }
> +
> return nl80211_parse_sta_wme(info, params);
> }
>
> @@ -4089,6 +4105,20 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
> return -EINVAL;
> }
>
> + if (info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]) {
> + params->supported_channels =
> + nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]);
> + params->supported_channels_len =
> + nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]);
> + }
> +
> + if (info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]) {
> + params->supported_oper_classes =
> + nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]);
> + params->supported_oper_classes_len =
> + nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]);
> + }
> +
> err = nl80211_parse_sta_wme(info, ¶ms);
> if (err)
> return err;
> --
> 1.8.2.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox