* Re: [PATCH] rtlwifi: Fix null-pointer dereferences in error handling code of rtl_pci_probe()
From: Kalle Valo @ 2019-05-28 11:55 UTC (permalink / raw)
To: Jia-Ju Bai
Cc: pkshih, davem, linux-wireless, netdev, linux-kernel, Jia-Ju Bai
In-Reply-To: <20190514123439.10524-1-baijiaju1990@gmail.com>
Jia-Ju Bai <baijiaju1990@gmail.com> wrote:
> *BUG 1:
> In rtl_pci_probe(), when rtlpriv->cfg->ops->init_sw_vars() fails,
> rtl_deinit_core() in the error handling code is executed.
> rtl_deinit_core() calls rtl_free_entries_from_scan_list(), which uses
> rtlpriv->scan_list.list in list_for_each_entry_safe(), but it has been
> initialized. Thus a null-pointer dereference occurs.
> The reason is that rtlpriv->scan_list.list is initialized by
> INIT_LIST_HEAD() in rtl_init_core(), which has not been called.
>
> To fix this bug, rtl_deinit_core() should not be called when
> rtlpriv->cfg->ops->init_sw_vars() fails.
>
> *BUG 2:
> In rtl_pci_probe(), rtl_init_core() can fail when rtl_regd_init() in
> this function fails, and rtlpriv->scan_list.list has not been
> initialized by INIT_LIST_HEAD(). Then, rtl_deinit_core() in the error
> handling code of rtl_pci_probe() is executed. Finally, a null-pointer
> dereference occurs due to the same reason of the above bug.
>
> To fix this bug, the initialization of lists in rtl_init_core() are
> performed before the call to rtl_regd_init().
>
> These bugs are found by a runtime fuzzing tool named FIZZER written by
> us.
>
> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Ping & Larry, is this ok to take?
--
https://patchwork.kernel.org/patch/10942971/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* FYI: vendor specific nl80211 API upstream
From: Johannes Berg @ 2019-05-28 11:51 UTC (permalink / raw)
To: linux-wireless
Hi all,
FYI - at the discussions in Prague we decided to let some vendor
specific nl80211 API go upstream, and I've just documented the expected
rules here:
https://wireless.wiki.kernel.org/en/developers/documentation/nl80211#vendor-specific_api
I guess this will be fine-tuned as we go along, but wanted all to be
aware.
johannes
^ permalink raw reply
* Re: [PATCH v2 2/5] rtw88: pci: use ieee80211_ac_numbers instead of 0-3
From: Kalle Valo @ 2019-05-28 11:51 UTC (permalink / raw)
To: yhchuang; +Cc: linux-wireless
In-Reply-To: <1556884415-23474-3-git-send-email-yhchuang@realtek.com>
<yhchuang@realtek.com> wrote:
> From: Yan-Hsuan Chuang <yhchuang@realtek.com>
>
> AC numbers are defined as enum in mac80211, use them instead of bare
> 0-3 indexing.
>
> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
3 patches applied to wireless-drivers-next.git, thanks.
82dea406c509 rtw88: pci: use ieee80211_ac_numbers instead of 0-3
0d7882950c73 rtw88: pci: check if queue mapping exceeds size of ac_to_hwq
a3b0c66c5928 rtw88: more descriptions about LPS
--
https://patchwork.kernel.org/patch/10928423/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* [PATCH V2 6/6] ath11k: add spatial reuse support
From: John Crispin @ 2019-05-28 11:49 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, ath11k, John Crispin, Shashidhar Lakkavalli
In-Reply-To: <20190528114952.838-1-john@phrozen.org>
Trigger the WMI call en/disabling OBSS PD when the bss config changes or we
assoc to an AP that broadcasts the IE.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 10 ++++++++
drivers/net/wireless/ath/ath11k/wmi.c | 35 +++++++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/wmi.h | 16 ++++++++++++
3 files changed, 61 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 904b16d020d4..f87a9f906202 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1715,6 +1715,12 @@ static void ath11k_bss_assoc(struct ieee80211_hw *hw,
1);
if (ret)
ath11k_warn(ar->ab, "Unable to authorize BSS peer: %d\n", ret);
+
+ ret = ath11k_wmi_send_obss_spr_cmd(ar, arvif->vdev_id,
+ &bss_conf->he_obss_pd);
+ if (ret)
+ ath11k_warn(ar->ab, "failed to set vdev %i OBSS PD parameters: %d\n",
+ arvif->vdev_id, ret);
}
static void ath11k_bss_disassoc(struct ieee80211_hw *hw,
@@ -1906,6 +1912,10 @@ static void ath11k_bss_info_changed(struct ieee80211_hw *hw,
ath11k_wmi_send_twt_disable_cmd(ar, ar->pdev_idx);
}
+ if (changed & BSS_CHANGED_HE_OBSS_PD)
+ ath11k_wmi_send_obss_spr_cmd(ar, arvif->vdev_id,
+ &info->he_obss_pd);
+
mutex_unlock(&ar->conf_mutex);
}
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 7a46239b5d14..941c05cd529e 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -2586,6 +2586,41 @@ ath11k_wmi_send_twt_disable_cmd(struct ath11k *ar, u32 pdev_id)
return ret;
}
+int
+ath11k_wmi_send_obss_spr_cmd(struct ath11k *ar, u32 vdev_id,
+ struct ieee80211_he_obss_pd *he_obss_pd)
+{
+ struct ath11k_pdev_wmi *wmi = ar->wmi;
+ struct ath11k_base *ab = wmi->wmi_sc->sc;
+ struct wmi_obss_spatial_reuse_params_cmd *cmd;
+ struct sk_buff *skb;
+ int ret, len;
+
+ len = sizeof(*cmd);
+
+ skb = ath11k_wmi_alloc_skb(wmi->wmi_sc, len);
+ if (!skb)
+ return -ENOMEM;
+
+ cmd = (void *)skb->data;
+ cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG,
+ WMI_TAG_OBSS_SPATIAL_REUSE_SET_CMD) |
+ FIELD_PREP(WMI_TLV_LEN, len - TLV_HDR_SIZE);
+ cmd->vdev_id = vdev_id;
+ cmd->enable = he_obss_pd->enable;
+ cmd->obss_min = he_obss_pd->min_offset;
+ cmd->obss_max = he_obss_pd->max_offset;
+
+ ret = ath11k_wmi_cmd_send(wmi, skb,
+ WMI_PDEV_OBSS_PD_SPATIAL_REUSE_CMDID);
+ if (ret) {
+ ath11k_warn(ab,
+ "Failed to send WMI_PDEV_OBSS_PD_SPATIAL_REUSE_CMDID");
+ dev_kfree_skb(skb);
+ }
+ return ret;
+}
+
static inline void ath11k_fill_band_to_mac_param(struct ath11k_base *soc,
struct wmi_host_pdev_band_to_mac *band_to_mac)
{
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index c74aa98439ca..10f2a83db327 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -172,6 +172,8 @@ enum wmi_cmd_group {
WMI_GRP_WLM, /* 0x3c */
WMI_GRP_11K_OFFLOAD, /* 0x3d */
WMI_GRP_TWT, /* 0x3e */
+ WMI_GRP_MOTION_DET, /* 0x3f */
+ WMI_GRP_SPATIAL_REUSE, /* 0x40 */
};
@@ -541,6 +543,9 @@ enum wmi_tlv_cmd_id {
WMI_TWT_DEL_DIALOG_CMDID,
WMI_TWT_PAUSE_DIALOG_CMDID,
WMI_TWT_RESUME_DIALOG_CMDID,
+ WMI_PDEV_OBSS_PD_SPATIAL_REUSE_CMDID =
+ WMI_TLV_CMD(WMI_GRP_SPATIAL_REUSE),
+ WMI_PDEV_OBSS_PD_SPATIAL_REUSE_SET_DEF_OBSS_THRESH_CMDID,
};
enum wmi_tlv_event_id {
@@ -5114,6 +5119,15 @@ struct wmi_twt_disable_params_cmd {
u32 pdev_id;
};
+struct wmi_obss_spatial_reuse_params_cmd {
+ u32 tlv_header;
+ u32 pdev_id;
+ u32 enable;
+ s32 obss_min;
+ s32 obss_max;
+ u32 vdev_id;
+};
+
struct target_resource_config {
u32 num_vdevs;
u32 num_peers;
@@ -5305,4 +5319,6 @@ void ath11k_wmi_fw_stats_fill(struct ath11k *ar,
int ath11k_wmi_simulate_radar(struct ath11k *ar);
int ath11k_wmi_send_twt_enable_cmd(struct ath11k *ar, u32 pdev_id);
int ath11k_wmi_send_twt_disable_cmd(struct ath11k *ar, u32 pdev_id);
+int ath11k_wmi_send_obss_spr_cmd(struct ath11k *ar, u32 vdev_id,
+ struct ieee80211_he_obss_pd *he_obss_pd);
#endif
--
2.20.1
^ permalink raw reply related
* [PATCH V2 5/6] mac80211: allow setting spatial reuse parameters from bss_conf
From: John Crispin @ 2019-05-28 11:49 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, ath11k, John Crispin, Shashidhar Lakkavalli
In-Reply-To: <20190528114952.838-1-john@phrozen.org>
Store the OBSS PD parameters inside bss_conf when bringing up an AP and/or
when a station connects to an AP. This allows the driver to configure the
HW accordingly.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
include/net/cfg80211.h | 15 +++++++++++++
include/net/mac80211.h | 4 ++++
include/uapi/linux/nl80211.h | 27 +++++++++++++++++++++++
net/mac80211/cfg.c | 5 ++++-
net/mac80211/he.c | 24 +++++++++++++++++++++
net/mac80211/ieee80211_i.h | 3 +++
net/mac80211/mlme.c | 1 +
net/wireless/nl80211.c | 42 ++++++++++++++++++++++++++++++++++++
8 files changed, 120 insertions(+), 1 deletion(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 044c519a008f..3f67f01b5f7a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -249,6 +249,19 @@ struct ieee80211_rate {
u16 hw_value, hw_value_short;
};
+/**
+ * struct ieee80211_he_obss_pd - AP settings for spatial reuse
+ *
+ * @enable: is the feature enabled.
+ * @min_offset: minimal tx power offset an associated station shall use
+ * @max_offset: maximum tx power offset an associated station shall use
+ */
+struct ieee80211_he_obss_pd {
+ bool enable;
+ u32 min_offset;
+ u32 max_offset;
+};
+
/**
* struct ieee80211_sta_ht_cap - STA's HT capabilities
*
@@ -878,6 +891,7 @@ enum cfg80211_ap_settings_flags {
* @vht_required: stations must support VHT
* @twt_responder: Enable Target Wait Time
* @flags: flags, as defined in enum cfg80211_ap_settings_flags
+ * @he_obss_pd: OBSS Packet Detection settings
*/
struct cfg80211_ap_settings {
struct cfg80211_chan_def chandef;
@@ -905,6 +919,7 @@ struct cfg80211_ap_settings {
bool ht_required, vht_required;
bool twt_responder;
u32 flags;
+ struct ieee80211_he_obss_pd he_obss_pd;
};
/**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 96359fd3d026..8391e1b4d80b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -318,6 +318,7 @@ struct ieee80211_vif_chanctx_switch {
* @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
* functionality changed for this BSS (AP mode).
* @BSS_CHANGED_TWT: TWT status changed
+ * @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed.
*
*/
enum ieee80211_bss_change {
@@ -349,6 +350,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_MCAST_RATE = 1<<25,
BSS_CHANGED_FTM_RESPONDER = 1<<26,
BSS_CHANGED_TWT = 1<<27,
+ BSS_CHANGED_HE_OBSS_PD = 1<<28,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -604,6 +606,7 @@ struct ieee80211_ftm_responder_params {
* @profile_periodicity: the least number of beacon frames need to be received
* in order to discover all the nontransmitted BSSIDs in the set.
* @he_operation: HE operation information of the AP we are connected to
+ * @he_obss_pd: OBSS Packet Detection parameters.
*/
struct ieee80211_bss_conf {
const u8 *bssid;
@@ -666,6 +669,7 @@ struct ieee80211_bss_conf {
bool ema_ap;
u8 profile_periodicity;
struct ieee80211_he_operation he_operation;
+ struct ieee80211_he_obss_pd he_obss_pd;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 07d3f1949f96..78f3326ae0ea 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2310,6 +2310,9 @@ enum nl80211_commands {
*
* @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
*
+ * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
+ * functionality.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2763,6 +2766,8 @@ enum nl80211_attrs {
NL80211_ATTR_TWT_RESPONDER,
+ NL80211_ATTR_HE_OBSS_PD,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -6390,4 +6395,26 @@ enum nl80211_peer_measurement_ftm_resp {
NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1
};
+/**
+ * enum nl80211_he_spr - spatial reuse attributes
+ * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid
+ *
+ * @NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET: the OBSS PD minimum tx power offset.
+ * @NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET: the OBSS PD maximum tx power offset.
+ *
+ * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
+ * @NL80211_HE_OBSS_PD_ATTR_MAX: highest spiatl reuse attribute.
+ */
+enum nl80211_he_spr_attributes {
+ __NL80211_HE_OBSS_PD_ATTR_INVALID,
+
+ NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET,
+ NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET,
+
+ /* keep last */
+ __NL80211_ATTR_HE_OBSS_PD_LAST,
+ NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_ATTR_HE_OBSS_PD_LAST - 1,
+};
+
+
#endif /* __LINUX_NL80211_H */
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8be2f32fedfc..742b62187a4c 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -940,7 +940,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
BSS_CHANGED_SSID |
BSS_CHANGED_P2P_PS |
BSS_CHANGED_TXPOWER |
- BSS_CHANGED_TWT;
+ BSS_CHANGED_TWT |
+ BSS_CHANGED_HE_OBSS_PD;
int err;
int prev_beacon_int;
@@ -1011,6 +1012,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
sdata->vif.bss_conf.enable_beacon = true;
sdata->vif.bss_conf.allow_p2p_go_ps = sdata->vif.p2p;
sdata->vif.bss_conf.twt_responder = params->twt_responder;
+ memcpy(&sdata->vif.bss_conf.he_obss_pd, ¶ms->he_obss_pd,
+ sizeof(struct ieee80211_he_obss_pd));
sdata->vif.bss_conf.ssid_len = params->ssid_len;
if (params->ssid_len)
diff --git a/net/mac80211/he.c b/net/mac80211/he.c
index 2d7a885bd531..5dd8c131cd19 100644
--- a/net/mac80211/he.c
+++ b/net/mac80211/he.c
@@ -67,3 +67,27 @@ ieee80211_he_op_ie_to_bss_conf(struct ieee80211_vif *vif,
}
memcpy(he_operation, he_op_ie_elem, sizeof(*he_operation));
}
+
+void
+ieee80211_he_spr_ie_to_bss_conf(struct ieee80211_vif *vif,
+ const struct ieee80211_he_spr *he_spr_ie_elem)
+{
+ struct ieee80211_he_obss_pd *he_obss_pd =
+ &vif->bss_conf.he_obss_pd;
+ const u8 *data = he_spr_ie_elem->optional;
+
+ memset(he_obss_pd, 0, sizeof(*he_obss_pd));
+
+ if (!he_spr_ie_elem)
+ return;
+
+ if (he_spr_ie_elem->he_sr_control &
+ IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT)
+ data++;
+ if (he_spr_ie_elem->he_sr_control &
+ IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT) {
+ he_obss_pd->max_offset = *data++;
+ he_obss_pd->min_offset = *data++;
+ he_obss_pd->enable = true;
+ }
+}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 0f0d0e1ac91c..b3d0fa3ae814 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1870,6 +1870,9 @@ ieee80211_he_cap_ie_to_sta_he_cap(struct ieee80211_sub_if_data *sdata,
struct ieee80211_supported_band *sband,
const u8 *he_cap_ie, u8 he_cap_len,
struct sta_info *sta);
+void
+ieee80211_he_spr_ie_to_bss_conf(struct ieee80211_vif *vif,
+ const struct ieee80211_he_spr *he_spr_ie_elem);
void
ieee80211_he_op_ie_to_bss_conf(struct ieee80211_vif *vif,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 32309f13fcb1..632c522cad0e 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3377,6 +3377,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
bss_conf->uora_ocw_range = elems.uora_element[0];
ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems.he_operation);
+ ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems.he_spr);
/* TODO: OPEN: what happens if BSS color disable is set? */
}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b4dbb6b56853..266636ce3803 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -542,6 +542,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
[NL80211_ATTR_AIRTIME_WEIGHT] = NLA_POLICY_MIN(NLA_U16, 1),
[NL80211_ATTR_TWT_RESPONDER] = { .type = NLA_FLAG },
+ [NL80211_ATTR_HE_OBSS_PD] = { .type = NLA_NESTED },
};
/* policy for the key attributes */
@@ -4253,6 +4254,40 @@ static int nl80211_parse_beacon(struct cfg80211_registered_device *rdev,
return 0;
}
+static const struct nla_policy
+ he_spr_policy[NL80211_HE_OBSS_PD_ATTR_MAX + 1] = {
+ [NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET] = { .type = NLA_U32 },
+ [NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET] = { .type = NLA_U32 },
+};
+
+static int nl80211_parse_he_obss_pd(struct nlattr *attrs,
+ struct ieee80211_he_obss_pd *he_obss_pd)
+{
+ struct nlattr *tb[NL80211_HE_OBSS_PD_ATTR_MAX + 1];
+ int err;
+
+ err = nla_parse_nested(tb, NL80211_HE_OBSS_PD_ATTR_MAX, attrs,
+ he_spr_policy, NULL);
+ if (err)
+ return err;
+
+ if (!tb[NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET] ||
+ !tb[NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET])
+ return -EINVAL;
+
+ he_obss_pd->min_offset =
+ nla_get_u32(tb[NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET]);
+ he_obss_pd->max_offset =
+ nla_get_u32(tb[NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET]);
+
+ if (he_obss_pd->min_offset >= he_obss_pd->max_offset)
+ return -EINVAL;
+
+ he_obss_pd->enable = true;
+
+ return 0;
+}
+
static void nl80211_check_ap_rate_selectors(struct cfg80211_ap_settings *params,
const u8 *rates)
{
@@ -4536,6 +4571,13 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
params.twt_responder =
nla_get_flag(info->attrs[NL80211_ATTR_TWT_RESPONDER]);
+ if (info->attrs[NL80211_ATTR_HE_OBSS_PD]) {
+ err = nl80211_parse_he_obss_pd(info->attrs[NL80211_ATTR_HE_OBSS_PD],
+ ¶ms.he_obss_pd);
+ if (err)
+ return err;
+ }
+
nl80211_calculate_ap_params(¶ms);
if (info->attrs[NL80211_ATTR_EXTERNAL_AUTH_SUPPORT])
--
2.20.1
^ permalink raw reply related
* [PATCH V2 3/6] ath11k: add TWT support
From: John Crispin @ 2019-05-28 11:49 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, ath11k, John Crispin, Shashidhar Lakkavalli
In-Reply-To: <20190528114952.838-1-john@phrozen.org>
Add target wait time wmi calls to the driver. En/disable the support
from when the bss_config changes. We ignore the cmd completion events.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 12 ++++
drivers/net/wireless/ath/ath11k/wmi.c | 91 +++++++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/wmi.h | 71 +++++++++++++++++++++
3 files changed, 174 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 06fc62307f4e..904b16d020d4 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1326,6 +1326,11 @@ static void ath11k_peer_assoc_h_he(struct ath11k *ar,
}
}
+ if (he_cap->he_cap_elem.mac_cap_info[0] & IEEE80211_HE_MAC_CAP0_TWT_RES)
+ arg->twt_responder = true;
+ if (he_cap->he_cap_elem.mac_cap_info[0] & IEEE80211_HE_MAC_CAP0_TWT_REQ)
+ arg->twt_requester = true;
+
switch (sta->bandwidth) {
case IEEE80211_STA_RX_BW_160:
if (he_cap->he_cap_elem.phy_cap_info[0] &
@@ -1894,6 +1899,13 @@ static void ath11k_bss_info_changed(struct ieee80211_hw *hw,
ath11k_mac_txpower_recalc(ar);
}
+ if (changed & BSS_CHANGED_TWT) {
+ if (info->twt_requester || info->twt_responder)
+ ath11k_wmi_send_twt_enable_cmd(ar, ar->pdev_idx);
+ else
+ ath11k_wmi_send_twt_disable_cmd(ar, ar->pdev_idx);
+ }
+
mutex_unlock(&ar->conf_mutex);
}
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index d93464c129fe..7a46239b5d14 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1672,6 +1672,10 @@ ath11k_wmi_copy_peer_flags(struct wmi_peer_assoc_complete_cmd *cmd,
cmd->peer_flags |= WMI_PEER_VHT;
if (param->he_flag)
cmd->peer_flags |= WMI_PEER_HE;
+ if (param->twt_requester)
+ cmd->peer_flags |= WMI_PEER_TWT_REQ;
+ if (param->twt_responder)
+ cmd->peer_flags |= WMI_PEER_TWT_RESP;
}
/* Suppress authorization for all AUTH modes that need 4-way handshake
@@ -2502,6 +2506,86 @@ int ath11k_wmi_pdev_pktlog_disable(struct ath11k *ar)
return ret;
}
+int
+ath11k_wmi_send_twt_enable_cmd(struct ath11k *ar, u32 pdev_id)
+{
+ struct ath11k_pdev_wmi *wmi = ar->wmi;
+ struct ath11k_base *ab = wmi->wmi_sc->sc;
+ struct wmi_twt_enable_params_cmd *cmd;
+ struct sk_buff *skb;
+ int ret, len;
+
+ len = sizeof(*cmd);
+
+ skb = ath11k_wmi_alloc_skb(wmi->wmi_sc, len);
+ if (!skb)
+ return -ENOMEM;
+
+ cmd = (void *)skb->data;
+ cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_TWT_ENABLE_CMD) |
+ FIELD_PREP(WMI_TLV_LEN, len - TLV_HDR_SIZE);
+ cmd->pdev_id = pdev_id;
+ cmd->sta_cong_timer_ms = ATH11K_TWT_DEF_STA_CONG_TIMER_MS;
+ cmd->default_slot_size = ATH11K_TWT_DEF_DEFAULT_SLOT_SIZE;
+ cmd->congestion_thresh_setup = ATH11K_TWT_DEF_CONGESTION_THRESH_SETUP;
+ cmd->congestion_thresh_teardown =
+ ATH11K_TWT_DEF_CONGESTION_THRESH_TEARDOWN;
+ cmd->congestion_thresh_critical =
+ ATH11K_TWT_DEF_CONGESTION_THRESH_CRITICAL;
+ cmd->interference_thresh_teardown =
+ ATH11K_TWT_DEF_INTERFERENCE_THRESH_TEARDOWN;
+ cmd->interference_thresh_setup =
+ ATH11K_TWT_DEF_INTERFERENCE_THRESH_SETUP;
+ cmd->min_no_sta_setup = ATH11K_TWT_DEF_MIN_NO_STA_SETUP;
+ cmd->min_no_sta_teardown = ATH11K_TWT_DEF_MIN_NO_STA_TEARDOWN;
+ cmd->no_of_bcast_mcast_slots = ATH11K_TWT_DEF_NO_OF_BCAST_MCAST_SLOTS;
+ cmd->min_no_twt_slots = ATH11K_TWT_DEF_MIN_NO_TWT_SLOTS;
+ cmd->max_no_sta_twt = ATH11K_TWT_DEF_MAX_NO_STA_TWT;
+ cmd->mode_check_interval = ATH11K_TWT_DEF_MODE_CHECK_INTERVAL;
+ cmd->add_sta_slot_interval = ATH11K_TWT_DEF_ADD_STA_SLOT_INTERVAL;
+ cmd->remove_sta_slot_interval =
+ ATH11K_TWT_DEF_REMOVE_STA_SLOT_INTERVAL;
+ /* TODO add MBSSID support */
+ cmd->mbss_support = 0;
+
+ ret = ath11k_wmi_cmd_send(wmi, skb,
+ WMI_TWT_ENABLE_CMDID);
+ if (ret) {
+ ath11k_warn(ab, "Failed to send WMI_TWT_ENABLE_CMDID");
+ dev_kfree_skb(skb);
+ }
+ return ret;
+}
+
+int
+ath11k_wmi_send_twt_disable_cmd(struct ath11k *ar, u32 pdev_id)
+{
+ struct ath11k_pdev_wmi *wmi = ar->wmi;
+ struct ath11k_base *ab = wmi->wmi_sc->sc;
+ struct wmi_twt_disable_params_cmd *cmd;
+ struct sk_buff *skb;
+ int ret, len;
+
+ len = sizeof(*cmd);
+
+ skb = ath11k_wmi_alloc_skb(wmi->wmi_sc, len);
+ if (!skb)
+ return -ENOMEM;
+
+ cmd = (void *)skb->data;
+ cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_TWT_DISABLE_CMD) |
+ FIELD_PREP(WMI_TLV_LEN, len - TLV_HDR_SIZE);
+ cmd->pdev_id = pdev_id;
+
+ ret = ath11k_wmi_cmd_send(wmi, skb,
+ WMI_TWT_DISABLE_CMDID);
+ if (ret) {
+ ath11k_warn(ab, "Failed to send WMI_TWT_DIeABLE_CMDID");
+ dev_kfree_skb(skb);
+ }
+ return ret;
+}
+
static inline void ath11k_fill_band_to_mac_param(struct ath11k_base *soc,
struct wmi_host_pdev_band_to_mac *band_to_mac)
{
@@ -2592,6 +2676,9 @@ ath11k_wmi_copy_resource_config(struct wmi_resource_config *wmi_cfg,
wmi_cfg->use_pdev_id = tg_cfg->use_pdev_id;
wmi_cfg->flag1 = tg_cfg->atf_config;
wmi_cfg->peer_map_unmap_v2_support = tg_cfg->peer_map_unmap_v2_support;
+ wmi_cfg->sched_params = tg_cfg->sched_params;
+ wmi_cfg->twt_ap_pdev_count = tg_cfg->twt_ap_pdev_count;
+ wmi_cfg->twt_ap_sta_count = tg_cfg->twt_ap_sta_count;
}
static int ath11k_init_cmd_send(struct ath11k_pdev_wmi *wmi,
@@ -2783,6 +2870,8 @@ int ath11k_wmi_cmd_init(struct ath11k_base *sc)
config.beacon_tx_offload_max_vdev = sc->num_radios * TARGET_MAX_BCN_OFFLD;
config.rx_batchmode = TARGET_RX_BATCHMODE;
config.peer_map_unmap_v2_support = 1;
+ config.twt_ap_pdev_count = 2;
+ config.twt_ap_sta_count = 1000;
memcpy(&wmi_sc->wlan_resource_config, &config, sizeof(config));
@@ -5628,6 +5717,8 @@ static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
/* add Unsupported events here */
case WMI_TBTTOFFSET_EXT_UPDATE_EVENTID:
case WMI_VDEV_DELETE_RESP_EVENTID:
+ case WMI_TWT_ENABLE_EVENTID:
+ case WMI_TWT_DISABLE_EVENTID:
ath11k_dbg(ab, ATH11K_DBG_WMI,
"ignoring unsupported event 0x%x\n", id);
break;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 2e3e0cf866e9..c74aa98439ca 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -169,6 +169,10 @@ enum wmi_cmd_group {
WMI_GRP_MONITOR, /* 0x39 */
WMI_GRP_REGULATORY, /* 0x3a */
WMI_GRP_HW_DATA_FILTER, /* 0x3b */
+ WMI_GRP_WLM, /* 0x3c */
+ WMI_GRP_11K_OFFLOAD, /* 0x3d */
+ WMI_GRP_TWT, /* 0x3e */
+
};
#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
@@ -531,6 +535,12 @@ enum wmi_tlv_cmd_id {
WMI_NDP_RESPONDER_REQ_CMDID,
WMI_NDP_END_REQ_CMDID,
WMI_HW_DATA_FILTER_CMDID = WMI_TLV_CMD(WMI_GRP_HW_DATA_FILTER),
+ WMI_TWT_ENABLE_CMDID = WMI_TLV_CMD(WMI_GRP_TWT),
+ WMI_TWT_DISABLE_CMDID,
+ WMI_TWT_ADD_DIALOG_CMDID,
+ WMI_TWT_DEL_DIALOG_CMDID,
+ WMI_TWT_PAUSE_DIALOG_CMDID,
+ WMI_TWT_RESUME_DIALOG_CMDID,
};
enum wmi_tlv_event_id {
@@ -713,6 +723,13 @@ enum wmi_tlv_event_id {
WMI_NDP_INDICATION_EVENTID,
WMI_NDP_CONFIRM_EVENTID,
WMI_NDP_END_INDICATION_EVENTID,
+
+ WMI_TWT_ENABLE_EVENTID = WMI_TLV_CMD(WMI_GRP_TWT),
+ WMI_TWT_DISABLE_EVENTID,
+ WMI_TWT_ADD_DIALOG_EVENTID,
+ WMI_TWT_DEL_DIALOG_EVENTID,
+ WMI_TWT_PAUSE_DIALOG_EVENTID,
+ WMI_TWT_RESUME_DIALOG_EVENTID,
};
enum wmi_tlv_pdev_param {
@@ -2736,6 +2753,9 @@ struct wmi_resource_config {
u32 max_num_dbs_scan_duty_cycle;
u32 max_num_group_keys;
u32 peer_map_unmap_v2_support;
+ u32 sched_params;
+ u32 twt_ap_pdev_count;
+ u32 twt_ap_sta_count;
} __packed;
struct wmi_service_ready_event {
@@ -3907,6 +3927,8 @@ struct peer_assoc_params {
u32 peer_he_mcs_count;
u32 peer_he_rx_mcs_set[WMI_HOST_MAX_HE_RATE_SET];
u32 peer_he_tx_mcs_set[WMI_HOST_MAX_HE_RATE_SET];
+ bool twt_responder;
+ bool twt_requester;
struct ath11k_ppe_threshold peer_ppet;
};
@@ -4156,6 +4178,8 @@ struct wmi_unit_test_cmd {
#define WMI_PEER_DYN_MIMOPS 0x00020000
#define WMI_PEER_STATIC_MIMOPS 0x00040000
#define WMI_PEER_SPATIAL_MUX 0x00200000
+#define WMI_PEER_TWT_REQ 0x00400000
+#define WMI_PEER_TWT_RESP 0x00800000
#define WMI_PEER_VHT 0x02000000
#define WMI_PEER_80MHZ 0x04000000
#define WMI_PEER_PMF 0x08000000
@@ -5048,6 +5072,48 @@ struct wmi_wmm_params_all_arg {
struct wmi_wmm_params_arg ac_vo;
};
+#define ATH11K_TWT_DEF_STA_CONG_TIMER_MS 5000
+#define ATH11K_TWT_DEF_DEFAULT_SLOT_SIZE 10
+#define ATH11K_TWT_DEF_CONGESTION_THRESH_SETUP 50
+#define ATH11K_TWT_DEF_CONGESTION_THRESH_TEARDOWN 20
+#define ATH11K_TWT_DEF_CONGESTION_THRESH_CRITICAL 100
+#define ATH11K_TWT_DEF_INTERFERENCE_THRESH_TEARDOWN 80
+#define ATH11K_TWT_DEF_INTERFERENCE_THRESH_SETUP 50
+#define ATH11K_TWT_DEF_MIN_NO_STA_SETUP 10
+#define ATH11K_TWT_DEF_MIN_NO_STA_TEARDOWN 2
+#define ATH11K_TWT_DEF_NO_OF_BCAST_MCAST_SLOTS 2
+#define ATH11K_TWT_DEF_MIN_NO_TWT_SLOTS 2
+#define ATH11K_TWT_DEF_MAX_NO_STA_TWT 500
+#define ATH11K_TWT_DEF_MODE_CHECK_INTERVAL 10000
+#define ATH11K_TWT_DEF_ADD_STA_SLOT_INTERVAL 1000
+#define ATH11K_TWT_DEF_REMOVE_STA_SLOT_INTERVAL 5000
+
+struct wmi_twt_enable_params_cmd {
+ u32 tlv_header;
+ u32 pdev_id;
+ u32 sta_cong_timer_ms;
+ u32 mbss_support;
+ u32 default_slot_size;
+ u32 congestion_thresh_setup;
+ u32 congestion_thresh_teardown;
+ u32 congestion_thresh_critical;
+ u32 interference_thresh_teardown;
+ u32 interference_thresh_setup;
+ u32 min_no_sta_setup;
+ u32 min_no_sta_teardown;
+ u32 no_of_bcast_mcast_slots;
+ u32 min_no_twt_slots;
+ u32 max_no_sta_twt;
+ u32 mode_check_interval;
+ u32 add_sta_slot_interval;
+ u32 remove_sta_slot_interval;
+};
+
+struct wmi_twt_disable_params_cmd {
+ u32 tlv_header;
+ u32 pdev_id;
+};
+
struct target_resource_config {
u32 num_vdevs;
u32 num_peers;
@@ -5108,6 +5174,9 @@ struct target_resource_config {
u32 max_bssid_rx_filters;
u32 use_pdev_id;
u32 peer_map_unmap_v2_support;
+ u32 sched_params;
+ u32 twt_ap_pdev_count;
+ u32 twt_ap_sta_count;
};
#define WMI_MAX_MEM_REQS 32
@@ -5234,4 +5303,6 @@ void ath11k_wmi_fw_stats_fill(struct ath11k *ar,
struct ath11k_fw_stats *fw_stats, u32 stats_id,
char *buf);
int ath11k_wmi_simulate_radar(struct ath11k *ar);
+int ath11k_wmi_send_twt_enable_cmd(struct ath11k *ar, u32 pdev_id);
+int ath11k_wmi_send_twt_disable_cmd(struct ath11k *ar, u32 pdev_id);
#endif
--
2.20.1
^ permalink raw reply related
* [PATCH V2 4/6] mac80211: HE: add Spatial Reuse IE parsing support
From: John Crispin @ 2019-05-28 11:49 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, ath11k, John Crispin, Shashidhar Lakkavalli
In-Reply-To: <20190528114952.838-1-john@phrozen.org>
Add support to mac80211 for parsing SPR.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
include/linux/ieee80211.h | 49 ++++++++++++++++++++++++++++++++++++++
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/util.c | 4 ++++
3 files changed, 54 insertions(+)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 48703ec60d06..6109aa4024ad 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1628,6 +1628,18 @@ struct ieee80211_he_operation {
u8 optional[0];
} __packed;
+/**
+ * struct ieee80211_he_spr - HE spatial reuse element
+ *
+ * This structure is the "HE spatial reuse element" element as
+ * described in P802.11ax_D3.0 section 9.4.2.241
+ */
+struct ieee80211_he_spr {
+ u8 he_sr_control;
+ /* Optional 0 to 19 bytes: depends on @he_sr_control */
+ u8 optional[0];
+} __packed;
+
/**
* struct ieee80211_he_mu_edca_param_ac_rec - MU AC Parameter Record field
*
@@ -2063,6 +2075,42 @@ ieee80211_he_oper_size(const u8 *he_oper_ie)
return oper_len;
}
+/* HE Spatial Reuse defines */
+#define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT 0x4
+#define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT 0x8
+
+/*
+ * ieee80211_he_spr_size - calculate 802.11ax HE Spatial Reuse IE size
+ * @he_spr_ie: byte data of the He Spatial Reuse IE, stating from the the byte
+ * after the ext ID byte. It is assumed that he_spr_ie has at least
+ * sizeof(struct ieee80211_he_spr) bytes, checked already in
+ * ieee802_11_parse_elems_crc()
+ * @return the actual size of the IE data (not including header), or 0 on error
+ */
+static inline u8
+ieee80211_he_spr_size(const u8 *he_spr_ie)
+{
+ struct ieee80211_he_spr *he_spr = (void *)he_spr_ie;
+ u8 spr_len = sizeof(struct ieee80211_he_spr);
+ u32 he_spr_params;
+
+ /* Make sure the input is not NULL */
+ if (!he_spr_ie)
+ return 0;
+
+ /* Calc required length */
+ he_spr_params = le32_to_cpu(he_spr->he_sr_control);
+ if (he_spr_params & IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT)
+ spr_len++;
+ if (he_spr_params & IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT)
+ spr_len += 18;
+
+ /* Add the first byte (extension ID) to the total length */
+ spr_len++;
+
+ return spr_len;
+}
+
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
@@ -2485,6 +2533,7 @@ enum ieee80211_eid_ext {
WLAN_EID_EXT_HE_OPERATION = 36,
WLAN_EID_EXT_UORA = 37,
WLAN_EID_EXT_HE_MU_EDCA = 38,
+ WLAN_EID_EXT_HE_SPR = 39,
WLAN_EID_EXT_MAX_CHANNEL_SWITCH_TIME = 52,
WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION = 55,
};
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 159eb9506bdc..0f0d0e1ac91c 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1482,6 +1482,7 @@ struct ieee802_11_elems {
const struct ieee80211_meshconf_ie *mesh_config;
const u8 *he_cap;
const struct ieee80211_he_operation *he_operation;
+ const struct ieee80211_he_spr *he_spr;
const struct ieee80211_mu_edca_param_set *mu_edca_param_set;
const u8 *uora_element;
const u8 *mesh_id;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 4c1655972565..1b7076d24c18 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1282,6 +1282,10 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION &&
elen == 3) {
elems->mbssid_config_ie = (void *)&pos[1];
+ } else if (pos[0] == WLAN_EID_EXT_HE_SPR &&
+ elen >= sizeof(*elems->he_spr) &&
+ elen >= ieee80211_he_spr_size(&pos[1])) {
+ elems->he_spr = (void *)&pos[1];
}
break;
default:
--
2.20.1
^ permalink raw reply related
* [PATCH V2 1/6] mac80211: dynamically enable the TWT requester support on STA interfaces
From: John Crispin @ 2019-05-28 11:49 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, ath11k, John Crispin, Shashidhar Lakkavalli
In-Reply-To: <20190528114952.838-1-john@phrozen.org>
Turn TWT for STA interfaces when they associate and/or receive a
beacon where the twt_responder bit has changed.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
include/net/mac80211.h | 2 ++
net/mac80211/mlme.c | 18 ++++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index bebb3ef4efa1..b41a9351434f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -317,6 +317,7 @@ struct ieee80211_vif_chanctx_switch {
* @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
* @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
* functionality changed for this BSS (AP mode).
+ * @BSS_CHANGED_TWT: TWT status changed
*
*/
enum ieee80211_bss_change {
@@ -347,6 +348,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_KEEP_ALIVE = 1<<24,
BSS_CHANGED_MCAST_RATE = 1<<25,
BSS_CHANGED_FTM_RESPONDER = 1<<26,
+ BSS_CHANGED_TWT = 1<<27,
/* when adding here, make sure to change ieee80211_reconfig */
};
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 0684d1250d8a..32309f13fcb1 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3151,6 +3151,19 @@ static bool ieee80211_twt_req_supported(const struct sta_info *sta,
IEEE80211_HE_MAC_CAP0_TWT_RES;
}
+static int ieee80211_recalc_twt_req(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta,
+ struct ieee802_11_elems *elems)
+{
+ bool twt = ieee80211_twt_req_supported(sta, elems);
+
+ if (sdata->vif.bss_conf.twt_requester != twt) {
+ sdata->vif.bss_conf.twt_requester = twt;
+ return BSS_CHANGED_TWT;
+ }
+ return 0;
+}
+
static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
struct cfg80211_bss *cbss,
struct ieee80211_mgmt *mgmt, size_t len)
@@ -3333,8 +3346,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
sta);
bss_conf->he_support = sta->sta.he_cap.has_he;
- bss_conf->twt_requester =
- ieee80211_twt_req_supported(sta, &elems);
+ changed |= ieee80211_recalc_twt_req(sdata, sta, &elems);
} else {
bss_conf->he_support = false;
bss_conf->twt_requester = false;
@@ -3995,6 +4007,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
mutex_lock(&local->sta_mtx);
sta = sta_info_get(sdata, bssid);
+ changed |= ieee80211_recalc_twt_req(sdata, sta, &elems);
+
if (ieee80211_config_bw(sdata, sta,
elems.ht_cap_elem, elems.ht_operation,
elems.vht_operation, elems.he_operation,
--
2.20.1
^ permalink raw reply related
* [PATCH V2 2/6] mac80211: allow turning TWT responder support on and off via netlink
From: John Crispin @ 2019-05-28 11:49 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, ath11k, John Crispin, Shashidhar Lakkavalli
In-Reply-To: <20190528114952.838-1-john@phrozen.org>
Allow the userland daemon to en/disable TWT support for an AP.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
include/net/cfg80211.h | 2 ++
include/net/mac80211.h | 3 +++
include/uapi/linux/nl80211.h | 4 ++++
net/mac80211/cfg.c | 4 +++-
net/wireless/nl80211.c | 5 +++++
5 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 13bfeb712d36..044c519a008f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -876,6 +876,7 @@ enum cfg80211_ap_settings_flags {
* @he_cap: HE capabilities (or %NULL if HE isn't enabled)
* @ht_required: stations must support HT
* @vht_required: stations must support VHT
+ * @twt_responder: Enable Target Wait Time
* @flags: flags, as defined in enum cfg80211_ap_settings_flags
*/
struct cfg80211_ap_settings {
@@ -902,6 +903,7 @@ struct cfg80211_ap_settings {
const struct ieee80211_vht_cap *vht_cap;
const struct ieee80211_he_cap_elem *he_cap;
bool ht_required, vht_required;
+ bool twt_responder;
u32 flags;
};
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b41a9351434f..96359fd3d026 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -506,6 +506,8 @@ struct ieee80211_ftm_responder_params {
* @he_support: does this BSS support HE
* @twt_requester: does this BSS support TWT requester (relevant for managed
* mode only, set if the AP advertises TWT responder role)
+ * @twt_responder: does this BSS support TWT requester (relevant for managed
+ * mode only, set if the AP advertises TWT responder role)
* @assoc: association status
* @ibss_joined: indicates whether this station is part of an IBSS
* or not
@@ -614,6 +616,7 @@ struct ieee80211_bss_conf {
u16 frame_time_rts_th;
bool he_support;
bool twt_requester;
+ bool twt_responder;
/* association related data */
bool assoc, ibss_joined;
bool ibss_creator;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index b6e29161ec8b..07d3f1949f96 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2308,6 +2308,8 @@ enum nl80211_commands {
* @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
* scheduler.
*
+ * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2759,6 +2761,8 @@ enum nl80211_attrs {
NL80211_ATTR_AIRTIME_WEIGHT,
+ NL80211_ATTR_TWT_RESPONDER,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 09dd1c2860fc..8be2f32fedfc 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -939,7 +939,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
BSS_CHANGED_BEACON |
BSS_CHANGED_SSID |
BSS_CHANGED_P2P_PS |
- BSS_CHANGED_TXPOWER;
+ BSS_CHANGED_TXPOWER |
+ BSS_CHANGED_TWT;
int err;
int prev_beacon_int;
@@ -1009,6 +1010,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
sdata->vif.bss_conf.dtim_period = params->dtim_period;
sdata->vif.bss_conf.enable_beacon = true;
sdata->vif.bss_conf.allow_p2p_go_ps = sdata->vif.p2p;
+ sdata->vif.bss_conf.twt_responder = params->twt_responder;
sdata->vif.bss_conf.ssid_len = params->ssid_len;
if (params->ssid_len)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 47e30a58566c..b4dbb6b56853 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -541,6 +541,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_PEER_MEASUREMENTS] =
NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
[NL80211_ATTR_AIRTIME_WEIGHT] = NLA_POLICY_MIN(NLA_U16, 1),
+ [NL80211_ATTR_TWT_RESPONDER] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -4531,6 +4532,10 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
return PTR_ERR(params.acl);
}
+ if (info->attrs[NL80211_ATTR_TWT_RESPONDER])
+ params.twt_responder =
+ nla_get_flag(info->attrs[NL80211_ATTR_TWT_RESPONDER]);
+
nl80211_calculate_ap_params(¶ms);
if (info->attrs[NL80211_ATTR_EXTERNAL_AUTH_SUPPORT])
--
2.20.1
^ permalink raw reply related
* [PATCH V2 0/6] mac80211: HE: add TWT and SPR/OBSSPD support
From: John Crispin @ 2019-05-28 11:49 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, ath11k, John Crispin
This series adds support for propagating the TWT and OBSS PD information
from userland/assocs to a wireless driver. The patches for making use of
these features inside ath11k are also included.
I already have the hostapd patches ready and will send them once these
changes are inside nl80211.h.
Changes in V2
* always use bss_conf as per request from Johannes
John Crispin (6):
mac80211: dynamically enable the TWT requester support on STA
interfaces
mac80211: allow turning TWT responder support on and off via netlink
ath11k: add TWT support
mac80211: HE: add Spatial Reuse IE parsing support
mac80211: allow setting spatial reuse parameters from bss_conf
ath11k: add spatial reuse support
drivers/net/wireless/ath/ath11k/mac.c | 22 +++++
drivers/net/wireless/ath/ath11k/wmi.c | 126 ++++++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/wmi.h | 87 ++++++++++++++++++
include/linux/ieee80211.h | 49 ++++++++++
include/net/cfg80211.h | 17 ++++
include/net/mac80211.h | 9 ++
include/uapi/linux/nl80211.h | 31 +++++++
net/mac80211/cfg.c | 7 +-
net/mac80211/he.c | 24 +++++
net/mac80211/ieee80211_i.h | 4 +
net/mac80211/mlme.c | 19 +++-
net/mac80211/util.c | 4 +
net/wireless/nl80211.c | 47 ++++++++++
13 files changed, 443 insertions(+), 3 deletions(-)
--
2.20.1
^ permalink raw reply
* Re: [PATCH] rtw88: Make some symbols static
From: Kalle Valo @ 2019-05-28 11:42 UTC (permalink / raw)
To: YueHaibing
Cc: yhchuang, linux-kernel, netdev, linux-wireless, davem, YueHaibing
In-Reply-To: <20190504103224.27524-1-yuehaibing@huawei.com>
YueHaibing <yuehaibing@huawei.com> wrote:
> Fix sparse warnings:
>
> drivers/net/wireless/realtek/rtw88/phy.c:851:4: warning: symbol 'rtw_cck_size' was not declared. Should it be static?
> drivers/net/wireless/realtek/rtw88/phy.c:852:4: warning: symbol 'rtw_ofdm_size' was not declared. Should it be static?
> drivers/net/wireless/realtek/rtw88/phy.c:853:4: warning: symbol 'rtw_ht_1s_size' was not declared. Should it be static?
> drivers/net/wireless/realtek/rtw88/phy.c:854:4: warning: symbol 'rtw_ht_2s_size' was not declared. Should it be static?
> drivers/net/wireless/realtek/rtw88/phy.c:855:4: warning: symbol 'rtw_vht_1s_size' was not declared. Should it be static?
> drivers/net/wireless/realtek/rtw88/phy.c:856:4: warning: symbol 'rtw_vht_2s_size' was not declared. Should it be static?
> drivers/net/wireless/realtek/rtw88/fw.c:11:6: warning: symbol 'rtw_fw_c2h_cmd_handle_ext' was not declared. Should it be static?
> drivers/net/wireless/realtek/rtw88/fw.c:50:6: warning: symbol 'rtw_fw_send_h2c_command' was not declared. Should it be static?
>
> Reported-by: Hulk Robot <hulkci@huawei.com>
> Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Patch applied to wireless-drivers.git, thanks.
6aca09771db4 rtw88: Make some symbols static
--
https://patchwork.kernel.org/patch/10929669/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* Re: [PATCH] rtw88: avoid circular locking between local->iflist_mtx and rtwdev->mutex
From: Kalle Valo @ 2019-05-28 11:41 UTC (permalink / raw)
To: Stanislaw Gruszka; +Cc: linux-wireless, Yan-Hsuan Chuang, Stanislaw Gruszka
In-Reply-To: <1556886547-23632-1-git-send-email-sgruszka@redhat.com>
Stanislaw Gruszka <sgruszka@redhat.com> wrote:
> Remove circular lock dependency by using atomic version of interfaces
> iterate in watch_dog_work(), hence avoid taking local->iflist_mtx
> (rtw_vif_watch_dog_iter() only update some data, it can be called from
> atomic context). Fixes below LOCKDEP warning:
>
> [ 1157.219415] ======================================================
> [ 1157.225772] [ INFO: possible circular locking dependency detected ]
> [ 1157.232150] 3.10.0-1043.el7.sgruszka1.x86_64.debug #1 Not tainted
> [ 1157.238346] -------------------------------------------------------
> [ 1157.244635] kworker/u4:2/14490 is trying to acquire lock:
> [ 1157.250194] (&rtwdev->mutex){+.+.+.}, at: [<ffffffffc098322b>] rtw_ops_config+0x2b/0x90 [rtw88]
> [ 1157.259151]
> but task is already holding lock:
> [ 1157.265085] (&local->iflist_mtx){+.+...}, at: [<ffffffffc0b8ab7a>] ieee80211_mgd_probe_ap.part.28+0xca/0x160 [mac80211]
> [ 1157.276169]
> which lock already depends on the new lock.
>
> [ 1157.284488]
> the existing dependency chain (in reverse order) is:
> [ 1157.292101]
> -> #2 (&local->iflist_mtx){+.+...}:
> [ 1157.296919] [<ffffffffbc741a29>] lock_acquire+0x99/0x1e0
> [ 1157.302955] [<ffffffffbce72793>] mutex_lock_nested+0x93/0x410
> [ 1157.309416] [<ffffffffc0b6038f>] ieee80211_iterate_interfaces+0x2f/0x60 [mac80211]
> [ 1157.317730] [<ffffffffc09811ab>] rtw_watch_dog_work+0xcb/0x130 [rtw88]
> [ 1157.325003] [<ffffffffbc6d77bc>] process_one_work+0x22c/0x720
> [ 1157.331481] [<ffffffffbc6d7dd6>] worker_thread+0x126/0x3b0
> [ 1157.337589] [<ffffffffbc6e107f>] kthread+0xef/0x100
> [ 1157.343260] [<ffffffffbce848b7>] ret_from_fork_nospec_end+0x0/0x39
> [ 1157.350091]
> -> #1 ((&(&rtwdev->watch_dog_work)->work)){+.+...}:
> [ 1157.356314] [<ffffffffbc741a29>] lock_acquire+0x99/0x1e0
> [ 1157.362427] [<ffffffffbc6d570b>] flush_work+0x5b/0x310
> [ 1157.368287] [<ffffffffbc6d740e>] __cancel_work_timer+0xae/0x170
> [ 1157.374940] [<ffffffffbc6d7583>] cancel_delayed_work_sync+0x13/0x20
> [ 1157.381930] [<ffffffffc0982b49>] rtw_core_stop+0x29/0x50 [rtw88]
> [ 1157.388679] [<ffffffffc098bee6>] rtw_enter_ips+0x16/0x20 [rtw88]
> [ 1157.395428] [<ffffffffc0983242>] rtw_ops_config+0x42/0x90 [rtw88]
> [ 1157.402173] [<ffffffffc0b13343>] ieee80211_hw_config+0xc3/0x680 [mac80211]
> [ 1157.409854] [<ffffffffc0b3925b>] ieee80211_do_open+0x69b/0x9c0 [mac80211]
> [ 1157.417418] [<ffffffffc0b395e9>] ieee80211_open+0x69/0x70 [mac80211]
> [ 1157.424496] [<ffffffffbcd03442>] __dev_open+0xe2/0x160
> [ 1157.430356] [<ffffffffbcd03773>] __dev_change_flags+0xa3/0x180
> [ 1157.436922] [<ffffffffbcd03879>] dev_change_flags+0x29/0x60
> [ 1157.443224] [<ffffffffbcda14c4>] devinet_ioctl+0x794/0x890
> [ 1157.449331] [<ffffffffbcda27b5>] inet_ioctl+0x75/0xa0
> [ 1157.455087] [<ffffffffbccd54eb>] sock_do_ioctl+0x2b/0x60
> [ 1157.461178] [<ffffffffbccd5753>] sock_ioctl+0x233/0x310
> [ 1157.467109] [<ffffffffbc8bd820>] do_vfs_ioctl+0x410/0x6c0
> [ 1157.473233] [<ffffffffbc8bdb71>] SyS_ioctl+0xa1/0xc0
> [ 1157.478914] [<ffffffffbce84a5e>] system_call_fastpath+0x25/0x2a
> [ 1157.485569]
> -> #0 (&rtwdev->mutex){+.+.+.}:
> [ 1157.490022] [<ffffffffbc7409d1>] __lock_acquire+0xec1/0x1630
> [ 1157.496305] [<ffffffffbc741a29>] lock_acquire+0x99/0x1e0
> [ 1157.502413] [<ffffffffbce72793>] mutex_lock_nested+0x93/0x410
> [ 1157.508890] [<ffffffffc098322b>] rtw_ops_config+0x2b/0x90 [rtw88]
> [ 1157.515724] [<ffffffffc0b13343>] ieee80211_hw_config+0xc3/0x680 [mac80211]
> [ 1157.523370] [<ffffffffc0b8a4ca>] ieee80211_recalc_ps.part.27+0x9a/0x180 [mac80211]
> [ 1157.531685] [<ffffffffc0b8abc5>] ieee80211_mgd_probe_ap.part.28+0x115/0x160 [mac80211]
> [ 1157.540353] [<ffffffffc0b8b40d>] ieee80211_beacon_connection_loss_work+0x4d/0x80 [mac80211]
> [ 1157.549513] [<ffffffffbc6d77bc>] process_one_work+0x22c/0x720
> [ 1157.555886] [<ffffffffbc6d7dd6>] worker_thread+0x126/0x3b0
> [ 1157.562170] [<ffffffffbc6e107f>] kthread+0xef/0x100
> [ 1157.567765] [<ffffffffbce848b7>] ret_from_fork_nospec_end+0x0/0x39
> [ 1157.574579]
> other info that might help us debug this:
>
> [ 1157.582788] Chain exists of:
> &rtwdev->mutex --> (&(&rtwdev->watch_dog_work)->work) --> &local->iflist_mtx
>
> [ 1157.593024] Possible unsafe locking scenario:
>
> [ 1157.599046] CPU0 CPU1
> [ 1157.603653] ---- ----
> [ 1157.608258] lock(&local->iflist_mtx);
> [ 1157.612180] lock((&(&rtwdev->watch_dog_work)->work));
> [ 1157.620074] lock(&local->iflist_mtx);
> [ 1157.626555] lock(&rtwdev->mutex);
> [ 1157.630124]
> *** DEADLOCK ***
>
> [ 1157.636148] 4 locks held by kworker/u4:2/14490:
> [ 1157.640755] #0: (%s#6){.+.+.+}, at: [<ffffffffbc6d774a>] process_one_work+0x1ba/0x720
> [ 1157.648965] #1: ((&ifmgd->beacon_connection_loss_work)){+.+.+.}, at: [<ffffffffbc6d774a>] process_one_work+0x1ba/0x720
> [ 1157.659950] #2: (&wdev->mtx){+.+.+.}, at: [<ffffffffc0b8aad5>] ieee80211_mgd_probe_ap.part.28+0x25/0x160 [mac80211]
> [ 1157.670901] #3: (&local->iflist_mtx){+.+...}, at: [<ffffffffc0b8ab7a>] ieee80211_mgd_probe_ap.part.28+0xca/0x160 [mac80211]
> [ 1157.682466]
>
> Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Patch applied to wireless-drivers.git, thanks.
5b0efb4d670c rtw88: avoid circular locking between local->iflist_mtx and rtwdev->mutex
--
https://patchwork.kernel.org/patch/10928469/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* Re: [PATCH] wlcore: spi: Fix a memory leaking bug in wl1271_probe()
From: Kalle Valo @ 2019-05-28 11:39 UTC (permalink / raw)
To: Gen Zhang; +Cc: davem, linux-wireless, netdev, linux-kernel
In-Reply-To: <20190524030117.GA6024@zhanggen-UX430UQ>
Gen Zhang <blackgod016574@gmail.com> wrote:
> In wl1271_probe(), 'glue->core' is allocated by platform_device_alloc(),
> when this allocation fails, ENOMEM is returned. However, 'pdev_data'
> and 'glue' are allocated by devm_kzalloc() before 'glue->core'. When
> platform_device_alloc() returns NULL, we should also free 'pdev_data'
> and 'glue' before wl1271_probe() ends to prevent leaking memory.
>
> Similarly, we shoulf free 'pdev_data' when 'glue' is NULL. And we should
> free 'pdev_data' and 'glue' when 'glue->reg' is error and when 'ret' is
> error.
>
> Further, we should free 'glue->core', 'pdev_data' and 'glue' when this
> function normally ends to prevent leaking memory.
>
> Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Same questions as with similar SDIO patch:
https://patchwork.kernel.org/patch/10959049/
Patch set to Changes Requested.
--
https://patchwork.kernel.org/patch/10959053/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* Re: [PATCH v2 5.2] rsi: Properly initialize data in rsi_sdio_ta_reset
From: Kalle Valo @ 2019-05-28 11:33 UTC (permalink / raw)
To: Nathan Chancellor
Cc: Amitkumar Karwar, Siva Rebbagondla, linux-wireless, netdev,
linux-kernel, Arnd Bergmann, Nick Desaulniers, clang-built-linux,
Nathan Chancellor
In-Reply-To: <20190523153007.112231-1-natechancellor@gmail.com>
Nathan Chancellor <natechancellor@gmail.com> wrote:
> When building with -Wuninitialized, Clang warns:
>
> drivers/net/wireless/rsi/rsi_91x_sdio.c:940:43: warning: variable 'data'
> is uninitialized when used here [-Wuninitialized]
> put_unaligned_le32(TA_HOLD_THREAD_VALUE, data);
> ^~~~
> drivers/net/wireless/rsi/rsi_91x_sdio.c:930:10: note: initialize the
> variable 'data' to silence this warning
> u8 *data;
> ^
> = NULL
> 1 warning generated.
>
> Using Clang's suggestion of initializing data to NULL wouldn't work out
> because data will be dereferenced by put_unaligned_le32. Use kzalloc to
> properly initialize data, which matches a couple of other places in this
> driver.
>
> Fixes: e5a1ecc97e5f ("rsi: add firmware loading for 9116 device")
> Link: https://github.com/ClangBuiltLinux/linux/issues/464
> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Patch applied to wireless-drivers.git, thanks.
f57b5d85ed58 rsi: Properly initialize data in rsi_sdio_ta_reset
--
https://patchwork.kernel.org/patch/10958063/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* Re: [PATCH 5.2 v3] rtw88: fix unassigned rssi_level in rtw_sta_info
From: Kalle Valo @ 2019-05-28 11:30 UTC (permalink / raw)
To: yhchuang; +Cc: linux-wireless
In-Reply-To: <1557196098-1479-1-git-send-email-yhchuang@realtek.com>
<yhchuang@realtek.com> wrote:
> From: Yan-Hsuan Chuang <yhchuang@realtek.com>
>
> The new rssi_level should be stored in si, otherwise the rssi_level will
> never be updated and get a wrong RA mask, which is calculated by the
> rssi level
>
> If a wrong RA mask is chosen, the firmware will pick some *bad rates*.
> The most hurtful scene will be in *noisy environment*, such as office or
> public area with many APs and users.
> The latency would be high and the overall throughput would be only half
> or less.
>
> Tested in 2.4G in office area, with this patch the throughput increased
> from such as "1x Mbps -> 4x Mbps".
>
> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Patch applied to wireless-drivers.git, thanks.
a24bad74737f rtw88: fix unassigned rssi_level in rtw_sta_info
--
https://patchwork.kernel.org/patch/10932181/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* Re: [PATCH 5.1] rtw88: fix subscript above array bounds compiler warning
From: Kalle Valo @ 2019-05-28 11:29 UTC (permalink / raw)
To: Stanislaw Gruszka; +Cc: linux-wireless, Yan-Hsuan Chuang
In-Reply-To: <20190506073917.10106-1-sgruszka@redhat.com>
Stanislaw Gruszka <sgruszka@redhat.com> wrote:
> My compiler complains about:
>
> drivers/net/wireless/realtek/rtw88/phy.c: In function ‘rtw_phy_rf_power_2_rssi’:
> drivers/net/wireless/realtek/rtw88/phy.c:430:26: warning: array subscript is above array bounds [-Warray-bounds]
> linear = db_invert_table[i][j];
>
> According to comment power_db should be in range 1 ~ 96 .
> To fix add check for boundaries before access the array.
>
> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Patch applied to wireless-drivers.git, thanks.
8a03447dd311 rtw88: fix subscript above array bounds compiler warning
--
https://patchwork.kernel.org/patch/10930671/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* [PATCH v2] nl80211: require and validate vendor command policy
From: Johannes Berg @ 2019-05-28 8:56 UTC (permalink / raw)
To: linux-wireless; +Cc: Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
Require that each vendor command give a policy of its sub-attributes
in NL80211_ATTR_VENDOR_DATA, and then (stricly) check the contents,
including the NLA_F_NESTED flag that we couldn't check on the outer
layer because there we don't know yet.
It is possible to use VENDOR_CMD_RAW_DATA for raw data, but then no
nested data can be given (NLA_F_NESTED flag must be clear) and the
data is just passed as is to the command.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
drivers/net/wireless/mac80211_hwsim.c | 2 ++
include/net/cfg80211.h | 8 ++++++
include/net/netlink.h | 9 +++++++
net/wireless/core.c | 13 +++++++++
net/wireless/nl80211.c | 39 +++++++++++++++++++++++++--
5 files changed, 69 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index b5274d1f30fa..0ddfce6b94ea 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -457,6 +457,8 @@ static struct wiphy_vendor_command mac80211_hwsim_vendor_commands[] = {
.subcmd = QCA_NL80211_SUBCMD_TEST },
.flags = WIPHY_VENDOR_CMD_NEED_NETDEV,
.doit = mac80211_hwsim_vendor_cmd_test,
+ .policy = hwsim_vendor_test_policy,
+ .maxattr = QCA_WLAN_VENDOR_ATTR_MAX,
}
};
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 948139690a58..56dd141d8c89 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -4152,6 +4152,8 @@ struct sta_opmode_info {
u8 rx_nss;
};
+#define VENDOR_CMD_RAW_DATA ((const struct nla_policy *)ERR_PTR(-ENODATA))
+
/**
* struct wiphy_vendor_command - vendor command definition
* @info: vendor command identifying information, as used in nl80211
@@ -4162,6 +4164,10 @@ struct sta_opmode_info {
* @dumpit: dump callback, for transferring bigger/multiple items. The
* @storage points to cb->args[5], ie. is preserved over the multiple
* dumpit calls.
+ * @policy: policy pointer for attributes within %NL80211_ATTR_VENDOR_DATA.
+ * Set this to %VENDOR_CMD_RAW_DATA if no policy can be given and the
+ * attribute is just raw data (e.g. a firmware command).
+ * @maxattr: highest attribute number in policy
* It's recommended to not have the same sub command with both @doit and
* @dumpit, so that userspace can assume certain ones are get and others
* are used with dump requests.
@@ -4174,6 +4180,8 @@ struct wiphy_vendor_command {
int (*dumpit)(struct wiphy *wiphy, struct wireless_dev *wdev,
struct sk_buff *skb, const void *data, int data_len,
unsigned long *storage);
+ const struct nla_policy *policy;
+ unsigned int maxattr;
};
/**
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 395b4406f4b0..28ece67f5312 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -1754,6 +1754,15 @@ static inline int __nla_validate_nested(const struct nlattr *start, int maxtype,
validate, extack);
}
+static inline int
+nl80211_validate_nested(const struct nlattr *start, int maxtype,
+ const struct nla_policy *policy,
+ struct netlink_ext_ack *extack)
+{
+ return __nla_validate_nested(start, maxtype, policy,
+ NL_VALIDATE_STRICT, extack);
+}
+
static inline int
nla_validate_nested_deprecated(const struct nlattr *start, int maxtype,
const struct nla_policy *policy,
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 4e83892f1ac2..305290a109c0 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -858,6 +858,19 @@ int wiphy_register(struct wiphy *wiphy)
return -EINVAL;
}
+ for (i = 0; i < rdev->wiphy.n_vendor_commands; i++) {
+ /*
+ * Validate we have a policy (can be explicitly set to
+ * VENDOR_CMD_RAW_DATA which is non-NULL) and also that
+ * we have at least one of doit/dumpit.
+ */
+ if (WARN_ON(!rdev->wiphy.vendor_commands[i].policy))
+ return -EINVAL;
+ if (WARN_ON(!rdev->wiphy.vendor_commands[i].doit &&
+ !rdev->wiphy.vendor_commands[i].dumpit))
+ return -EINVAL;
+ }
+
#ifdef CONFIG_PM
if (WARN_ON(rdev->wiphy.wowlan && rdev->wiphy.wowlan->n_patterns &&
(!rdev->wiphy.wowlan->pattern_min_len ||
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 140d24e5718f..70eb841a56c4 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -12623,6 +12623,29 @@ static int nl80211_crit_protocol_stop(struct sk_buff *skb,
return 0;
}
+static int nl80211_vendor_check_policy(const struct wiphy_vendor_command *vcmd,
+ struct nlattr *attr,
+ struct netlink_ext_ack *extack)
+{
+ if (vcmd->policy == VENDOR_CMD_RAW_DATA) {
+ if (attr->nla_type & NLA_F_NESTED) {
+ NL_SET_ERR_MSG_ATTR(extack, attr,
+ "unexpected nested data");
+ return -EINVAL;
+ }
+
+ return 0;
+ }
+
+ if (!(attr->nla_type & NLA_F_NESTED)) {
+ NL_SET_ERR_MSG_ATTR(extack, attr, "expected nested data");
+ return -EINVAL;
+ }
+
+ return nl80211_validate_nested(attr, vcmd->maxattr, vcmd->policy,
+ extack);
+}
+
static int nl80211_vendor_cmd(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -12681,11 +12704,16 @@ static int nl80211_vendor_cmd(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_VENDOR_DATA]) {
data = nla_data(info->attrs[NL80211_ATTR_VENDOR_DATA]);
len = nla_len(info->attrs[NL80211_ATTR_VENDOR_DATA]);
+
+ err = nl80211_vendor_check_policy(vcmd,
+ info->attrs[NL80211_ATTR_VENDOR_DATA],
+ info->extack);
+ if (err)
+ return err;
}
rdev->cur_cmd_info = info;
- err = rdev->wiphy.vendor_commands[i].doit(&rdev->wiphy, wdev,
- data, len);
+ err = vcmd->doit(&rdev->wiphy, wdev, data, len);
rdev->cur_cmd_info = NULL;
return err;
}
@@ -12772,6 +12800,13 @@ static int nl80211_prepare_vendor_dump(struct sk_buff *skb,
if (attrbuf[NL80211_ATTR_VENDOR_DATA]) {
data = nla_data(attrbuf[NL80211_ATTR_VENDOR_DATA]);
data_len = nla_len(attrbuf[NL80211_ATTR_VENDOR_DATA]);
+
+ err = nl80211_vendor_check_policy(
+ &(*rdev)->wiphy.vendor_commands[vcmd_idx],
+ attrbuf[NL80211_ATTR_VENDOR_DATA],
+ cb->extack);
+ if (err)
+ return err;
}
/* 0 is the first index - add 1 to parse only once */
--
2.17.2
^ permalink raw reply related
* [PATCH] nl80211: require and validate vendor command policy
From: Johannes Berg @ 2019-05-28 8:12 UTC (permalink / raw)
To: linux-wireless; +Cc: Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
Require that each vendor command give a policy of its sub-attributes
in NL80211_ATTR_VENDOR_DATA, and then (stricly) check the contents,
including the NLA_F_NESTED flag that we couldn't check on the outer
layer because there we don't know yet.
It is possible to use VENDOR_CMD_RAW_DATA for raw data, but then no
nested data can be given (NLA_F_NESTED flag must be clear) and the
data is just passed as is to the command.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
include/net/cfg80211.h | 8 ++++++++
include/net/netlink.h | 9 +++++++++
net/wireless/core.c | 13 +++++++++++++
net/wireless/nl80211.c | 39 +++++++++++++++++++++++++++++++++++++--
4 files changed, 67 insertions(+), 2 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 948139690a58..56dd141d8c89 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -4152,6 +4152,8 @@ struct sta_opmode_info {
u8 rx_nss;
};
+#define VENDOR_CMD_RAW_DATA ((const struct nla_policy *)ERR_PTR(-ENODATA))
+
/**
* struct wiphy_vendor_command - vendor command definition
* @info: vendor command identifying information, as used in nl80211
@@ -4162,6 +4164,10 @@ struct sta_opmode_info {
* @dumpit: dump callback, for transferring bigger/multiple items. The
* @storage points to cb->args[5], ie. is preserved over the multiple
* dumpit calls.
+ * @policy: policy pointer for attributes within %NL80211_ATTR_VENDOR_DATA.
+ * Set this to %VENDOR_CMD_RAW_DATA if no policy can be given and the
+ * attribute is just raw data (e.g. a firmware command).
+ * @maxattr: highest attribute number in policy
* It's recommended to not have the same sub command with both @doit and
* @dumpit, so that userspace can assume certain ones are get and others
* are used with dump requests.
@@ -4174,6 +4180,8 @@ struct wiphy_vendor_command {
int (*dumpit)(struct wiphy *wiphy, struct wireless_dev *wdev,
struct sk_buff *skb, const void *data, int data_len,
unsigned long *storage);
+ const struct nla_policy *policy;
+ unsigned int maxattr;
};
/**
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 395b4406f4b0..28ece67f5312 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -1754,6 +1754,15 @@ static inline int __nla_validate_nested(const struct nlattr *start, int maxtype,
validate, extack);
}
+static inline int
+nl80211_validate_nested(const struct nlattr *start, int maxtype,
+ const struct nla_policy *policy,
+ struct netlink_ext_ack *extack)
+{
+ return __nla_validate_nested(start, maxtype, policy,
+ NL_VALIDATE_STRICT, extack);
+}
+
static inline int
nla_validate_nested_deprecated(const struct nlattr *start, int maxtype,
const struct nla_policy *policy,
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 4e83892f1ac2..305290a109c0 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -858,6 +858,19 @@ int wiphy_register(struct wiphy *wiphy)
return -EINVAL;
}
+ for (i = 0; i < rdev->wiphy.n_vendor_commands; i++) {
+ /*
+ * Validate we have a policy (can be explicitly set to
+ * VENDOR_CMD_RAW_DATA which is non-NULL) and also that
+ * we have at least one of doit/dumpit.
+ */
+ if (WARN_ON(!rdev->wiphy.vendor_commands[i].policy))
+ return -EINVAL;
+ if (WARN_ON(!rdev->wiphy.vendor_commands[i].doit &&
+ !rdev->wiphy.vendor_commands[i].dumpit))
+ return -EINVAL;
+ }
+
#ifdef CONFIG_PM
if (WARN_ON(rdev->wiphy.wowlan && rdev->wiphy.wowlan->n_patterns &&
(!rdev->wiphy.wowlan->pattern_min_len ||
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 140d24e5718f..70eb841a56c4 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -12623,6 +12623,29 @@ static int nl80211_crit_protocol_stop(struct sk_buff *skb,
return 0;
}
+static int nl80211_vendor_check_policy(const struct wiphy_vendor_command *vcmd,
+ struct nlattr *attr,
+ struct netlink_ext_ack *extack)
+{
+ if (vcmd->policy == VENDOR_CMD_RAW_DATA) {
+ if (attr->nla_type & NLA_F_NESTED) {
+ NL_SET_ERR_MSG_ATTR(extack, attr,
+ "unexpected nested data");
+ return -EINVAL;
+ }
+
+ return 0;
+ }
+
+ if (!(attr->nla_type & NLA_F_NESTED)) {
+ NL_SET_ERR_MSG_ATTR(extack, attr, "expected nested data");
+ return -EINVAL;
+ }
+
+ return nl80211_validate_nested(attr, vcmd->maxattr, vcmd->policy,
+ extack);
+}
+
static int nl80211_vendor_cmd(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -12681,11 +12704,16 @@ static int nl80211_vendor_cmd(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_VENDOR_DATA]) {
data = nla_data(info->attrs[NL80211_ATTR_VENDOR_DATA]);
len = nla_len(info->attrs[NL80211_ATTR_VENDOR_DATA]);
+
+ err = nl80211_vendor_check_policy(vcmd,
+ info->attrs[NL80211_ATTR_VENDOR_DATA],
+ info->extack);
+ if (err)
+ return err;
}
rdev->cur_cmd_info = info;
- err = rdev->wiphy.vendor_commands[i].doit(&rdev->wiphy, wdev,
- data, len);
+ err = vcmd->doit(&rdev->wiphy, wdev, data, len);
rdev->cur_cmd_info = NULL;
return err;
}
@@ -12772,6 +12800,13 @@ static int nl80211_prepare_vendor_dump(struct sk_buff *skb,
if (attrbuf[NL80211_ATTR_VENDOR_DATA]) {
data = nla_data(attrbuf[NL80211_ATTR_VENDOR_DATA]);
data_len = nla_len(attrbuf[NL80211_ATTR_VENDOR_DATA]);
+
+ err = nl80211_vendor_check_policy(
+ &(*rdev)->wiphy.vendor_commands[vcmd_idx],
+ attrbuf[NL80211_ATTR_VENDOR_DATA],
+ cb->extack);
+ if (err)
+ return err;
}
/* 0 is the first index - add 1 to parse only once */
--
2.17.2
^ permalink raw reply related
* Re: [PATCH v2] mmc: dw_mmc: Disable SDIO interrupts while suspended to fix suspend/resume【请注意，邮件由linux-rockchip-bounces+shawn.lin=rock-chips.com@lists.infradead.org代发】
From: Shawn Lin @ 2019-05-28 7:47 UTC (permalink / raw)
To: Douglas Anderson, Jaehoon Chung, Ulf Hansson
Cc: shawn.lin, heiko, linux-mmc, briannorris, linux-wireless, stable,
linux-kernel, linux-rockchip, mka, ryandcase, Guenter Roeck,
Emil Renner Berthing, Sonny Rao, Kalle Valo
In-Reply-To: <20190429204040.18725-1-dianders@chromium.org>
On 2019/4/30 4:40, Douglas Anderson wrote:
> Processing SDIO interrupts while dw_mmc is suspended (or partly
> suspended) seems like a bad idea. We really don't want to be
> processing them until we've gotten ourselves fully powered up.
>
> You might be wondering how it's even possible to become suspended when
> an SDIO interrupt is active. As can be seen in
> dw_mci_enable_sdio_irq(), we explicitly keep dw_mmc out of runtime
> suspend when the SDIO interrupt is enabled. ...but even though we
> stop normal runtime suspend transitions when SDIO interrupts are
> enabled, the dw_mci_runtime_suspend() can still get called for a full
> system suspend.
>
> Let's handle all this by explicitly masking SDIO interrupts in the
> suspend call and unmasking them later in the resume call. To do this
> cleanly I'll keep track of whether the client requested that SDIO
> interrupts be enabled so that we can reliably restore them regardless
> of whether we're masking them for one reason or another.
>
> It should be noted that if dw_mci_enable_sdio_irq() is never called
> (for instance, if we don't have an SDIO card plugged in) that
> "client_sdio_enb" will always be false. In those cases this patch
> adds a tiny bit of overhead to suspend/resume (a spinlock and a
> read/write of INTMASK) but other than that is a no-op. The
> SDMMC_INT_SDIO bit should always be clear and clearing it again won't
> hurt.
>
> Without this fix it can be seen that rk3288-veyron Chromebooks with
> Marvell WiFi would sometimes fail to resume WiFi even after picking my
> recent mwifiex patch [1]. Specifically you'd see messages like this:
> mwifiex_sdio mmc1:0001:1: Firmware wakeup failed
> mwifiex_sdio mmc1:0001:1: PREP_CMD: FW in reset state
>
> ...and tracing through the resume code in the failing cases showed
> that we were processing a SDIO interrupt really early in the resume
> call.
>
> NOTE: downstream in Chrome OS 3.14 and 3.18 kernels (both of which
> support the Marvell SDIO WiFi card) we had a patch ("CHROMIUM: sdio:
> Defer SDIO interrupt handling until after resume") [2]. Presumably
> this is the same problem that was solved by that patch.
>
> [1] https://lkml.kernel.org/r/20190404040106.40519-1-dianders@chromium.org
> [2] https://crrev.com/c/230765
>
Sorry for late, but FWIW:
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
> Cc: <stable@vger.kernel.org> # 4.14.x
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
> I didn't put any "Fixes" tag here, but presumably this could be
> backported to whichever kernels folks found it useful for. I have at
> least confirmed that kernels v4.14 and v4.19 (as well as v5.1-rc2)
> show the problem. It is very easy to pick this to v4.19 and it
> definitely fixes the problem there.
>
> I haven't spent the time to pick this to 4.14 myself, but presumably
> it wouldn't be too hard to backport this as far as v4.13 since that
> contains commit 32dba73772f8 ("mmc: dw_mmc: Convert to use
> MMC_CAP2_SDIO_IRQ_NOTHREAD for SDIO IRQs"). Prior to that it might
> make sense for anyone experiencing this problem to just pick the old
> CHROMIUM patch to fix them.
>
> Changes in v2:
> - Suggested 4.14+ in the stable tag (Sasha-bot)
> - Extra note that this is a noop on non-SDIO (Shawn / Emil)
> - Make boolean logic cleaner as per https://crrev.com/c/1586207/1
> - Hopefully clear comments as per https://crrev.com/c/1586207/1
>
> drivers/mmc/host/dw_mmc.c | 27 +++++++++++++++++++++++----
> drivers/mmc/host/dw_mmc.h | 3 +++
> 2 files changed, 26 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 80dc2fd6576c..480067b87a94 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1664,7 +1664,8 @@ static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card)
> }
> }
>
> -static void __dw_mci_enable_sdio_irq(struct dw_mci_slot *slot, int enb)
> +static void __dw_mci_enable_sdio_irq(struct dw_mci_slot *slot, bool enb,
> + bool client_requested)
> {
> struct dw_mci *host = slot->host;
> unsigned long irqflags;
> @@ -1672,6 +1673,20 @@ static void __dw_mci_enable_sdio_irq(struct dw_mci_slot *slot, int enb)
>
> spin_lock_irqsave(&host->irq_lock, irqflags);
>
> + /*
> + * If we're being called directly from dw_mci_enable_sdio_irq()
> + * (which means that the client driver actually wants to enable or
> + * disable interrupts) then save the request. Otherwise this
> + * wasn't directly requested by the client and we should logically
> + * AND it with the client request since we want to disable if
> + * _either_ the client disabled OR we have some other reason to
> + * disable temporarily.
> + */
> + if (client_requested)
> + host->client_sdio_enb = enb;
> + else
> + enb &= host->client_sdio_enb;
> +
> /* Enable/disable Slot Specific SDIO interrupt */
> int_mask = mci_readl(host, INTMASK);
> if (enb)
> @@ -1688,7 +1703,7 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
> struct dw_mci_slot *slot = mmc_priv(mmc);
> struct dw_mci *host = slot->host;
>
> - __dw_mci_enable_sdio_irq(slot, enb);
> + __dw_mci_enable_sdio_irq(slot, enb, true);
>
> /* Avoid runtime suspending the device when SDIO IRQ is enabled */
> if (enb)
> @@ -1701,7 +1716,7 @@ static void dw_mci_ack_sdio_irq(struct mmc_host *mmc)
> {
> struct dw_mci_slot *slot = mmc_priv(mmc);
>
> - __dw_mci_enable_sdio_irq(slot, 1);
> + __dw_mci_enable_sdio_irq(slot, true, false);
> }
>
> static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
> @@ -2734,7 +2749,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
> if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
> mci_writel(host, RINTSTS,
> SDMMC_INT_SDIO(slot->sdio_id));
> - __dw_mci_enable_sdio_irq(slot, 0);
> + __dw_mci_enable_sdio_irq(slot, false, false);
> sdio_signal_irq(slot->mmc);
> }
>
> @@ -3424,6 +3439,8 @@ int dw_mci_runtime_suspend(struct device *dev)
> {
> struct dw_mci *host = dev_get_drvdata(dev);
>
> + __dw_mci_enable_sdio_irq(host->slot, false, false);
> +
> if (host->use_dma && host->dma_ops->exit)
> host->dma_ops->exit(host);
>
> @@ -3490,6 +3507,8 @@ int dw_mci_runtime_resume(struct device *dev)
> /* Now that slots are all setup, we can enable card detect */
> dw_mci_enable_cd(host);
>
> + __dw_mci_enable_sdio_irq(host->slot, true, false);
> +
> return 0;
>
> err:
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index 46e9f8ec5398..dfbace0f5043 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -127,6 +127,7 @@ struct dw_mci_dma_slave {
> * @cmd11_timer: Timer for SD3.0 voltage switch over scheme.
> * @cto_timer: Timer for broken command transfer over scheme.
> * @dto_timer: Timer for broken data transfer over scheme.
> + * @client_sdio_enb: The value last passed to enable_sdio_irq.
> *
> * Locking
> * =======
> @@ -234,6 +235,8 @@ struct dw_mci {
> struct timer_list cmd11_timer;
> struct timer_list cto_timer;
> struct timer_list dto_timer;
> +
> + bool client_sdio_enb;
> };
>
> /* DMA ops for Internal/External DMAC interface */
>
^ permalink raw reply
* [PATCH 2/3][V2] treewide: rename match_string() -> __match_string()
From: Alexandru Ardelean @ 2019-05-28 7:39 UTC (permalink / raw)
To: linuxppc-dev, linux-kernel, linux-ide, linux-clk,
linux-rpi-kernel, linux-arm-kernel, linux-rockchip, linux-pm,
linux-gpio, dri-devel, intel-gfx, linux-omap, linux-mmc,
linux-wireless, netdev, linux-pci, linux-tegra, devel, linux-usb,
kvm, linux-fbdev, linux-mtd, cgroups, linux-mm,
linux-security-module, linux-integrity, alsa-devel
Cc: heikki.krogerus, gregkh, andriy.shevchenko, Alexandru Ardelean
In-Reply-To: <20190528073932.25365-1-alexandru.ardelean@analog.com>
This change does a rename of match_string() -> __match_string().
There are a few parts to the intention here (with this change):
1. Align with sysfs_match_string()/__sysfs_match_string()
2. This helps to group users of `match_string()`:
a. those that use ARRAY_SIZE(_a) to specify the number of elements
b. those that use -1 to pass a NULL terminated array of strings
c. special users, which (after eliminating 1 & 2) are not that many
This change is done treewide. Updates to the new match_string() helper will
be done on a per-subsystem basis, as the cadence of each subsystem differs.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
arch/powerpc/xmon/xmon.c | 2 +-
arch/x86/kernel/cpu/mtrr/if.c | 2 +-
drivers/ata/pata_hpt366.c | 2 +-
drivers/ata/pata_hpt37x.c | 2 +-
drivers/base/devcon.c | 2 +-
drivers/base/property.c | 2 +-
drivers/clk/bcm/clk-bcm2835.c | 6 +++---
drivers/clk/rockchip/clk.c | 4 ++--
drivers/cpufreq/intel_pstate.c | 2 +-
drivers/gpio/gpiolib-of.c | 2 +-
drivers/gpu/drm/drm_edid_load.c | 2 +-
drivers/gpu/drm/drm_panel_orientation_quirks.c | 2 +-
drivers/gpu/drm/i915/intel_pipe_crc.c | 2 +-
drivers/ide/hpt366.c | 2 +-
drivers/mfd/omap-usb-host.c | 2 +-
drivers/mmc/host/sdhci-xenon-phy.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 2 +-
drivers/pci/pcie/aer.c | 2 +-
drivers/phy/tegra/xusb.c | 4 ++--
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 4 ++--
drivers/pinctrl/pinmux.c | 2 +-
drivers/power/supply/ab8500_btemp.c | 2 +-
drivers/power/supply/ab8500_charger.c | 2 +-
drivers/power/supply/ab8500_fg.c | 2 +-
drivers/power/supply/abx500_chargalg.c | 2 +-
drivers/power/supply/charger-manager.c | 4 ++--
drivers/staging/gdm724x/gdm_tty.c | 4 ++--
drivers/usb/common/common.c | 4 ++--
drivers/usb/typec/class.c | 10 +++++-----
drivers/usb/typec/tps6598x.c | 2 +-
drivers/vfio/vfio.c | 6 +++---
drivers/video/fbdev/pxafb.c | 2 +-
fs/ubifs/auth.c | 4 ++--
include/linux/string.h | 2 +-
kernel/cgroup/rdma.c | 2 +-
kernel/sched/debug.c | 2 +-
kernel/trace/trace.c | 2 +-
lib/string.c | 8 ++++----
mm/mempolicy.c | 2 +-
mm/vmpressure.c | 4 ++--
security/apparmor/lsm.c | 4 ++--
security/integrity/ima/ima_main.c | 2 +-
sound/firewire/oxfw/oxfw.c | 2 +-
sound/pci/oxygen/oxygen_mixer.c | 2 +-
sound/soc/codecs/max98088.c | 2 +-
sound/soc/codecs/max98095.c | 2 +-
sound/soc/soc-dapm.c | 2 +-
47 files changed, 67 insertions(+), 67 deletions(-)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 1b0149b2bb6c..8039759a9e82 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -3264,7 +3264,7 @@ scanhex(unsigned long *vp)
regname[i] = c;
}
regname[i] = 0;
- i = match_string(regnames, N_PTREGS, regname);
+ i = __match_string(regnames, N_PTREGS, regname);
if (i < 0) {
printf("invalid register name '%%%s'\n", regname);
return 0;
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index 4d36dcc1cf87..4ec7a5f7b94c 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -142,7 +142,7 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
return -EINVAL;
ptr = skip_spaces(ptr + 5);
- i = match_string(mtrr_strings, MTRR_NUM_TYPES, ptr);
+ i = __match_string(mtrr_strings, MTRR_NUM_TYPES, ptr);
if (i < 0)
return i;
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 2574d6fbb1ad..a23ec26cc95f 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -181,7 +181,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
- i = match_string(list, -1, model_num);
+ i = __match_string(list, -1, model_num);
if (i >= 0) {
pr_warn("%s is not supported for %s\n", modestr, list[i]);
return 1;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index fad6c6a87313..ac0499e4ae4b 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -229,7 +229,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
- i = match_string(list, -1, model_num);
+ i = __match_string(list, -1, model_num);
if (i >= 0) {
pr_warn("%s is not supported for %s\n", modestr, list[i]);
return 1;
diff --git a/drivers/base/devcon.c b/drivers/base/devcon.c
index 04db9ae235e4..7bc1c619b721 100644
--- a/drivers/base/devcon.c
+++ b/drivers/base/devcon.c
@@ -70,7 +70,7 @@ void *device_connection_find_match(struct device *dev, const char *con_id,
mutex_lock(&devcon_lock);
list_for_each_entry(con, &devcon_list, list) {
- ep = match_string(con->endpoint, 2, devname);
+ ep = __match_string(con->endpoint, 2, devname);
if (ep < 0)
continue;
diff --git a/drivers/base/property.c b/drivers/base/property.c
index 348b37e64944..67195d6bfdca 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -443,7 +443,7 @@ int fwnode_property_match_string(const struct fwnode_handle *fwnode,
if (ret < 0)
goto out;
- ret = match_string(values, nval, string);
+ ret = __match_string(values, nval, string);
if (ret < 0)
ret = -ENODATA;
out:
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 770bb01f523e..91bb94d68798 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1391,9 +1391,9 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
for (i = 0; i < data->num_mux_parents; i++) {
parents[i] = data->parents[i];
- ret = match_string(cprman_parent_names,
- ARRAY_SIZE(cprman_parent_names),
- parents[i]);
+ ret = __match_string(cprman_parent_names,
+ ARRAY_SIZE(cprman_parent_names),
+ parents[i]);
if (ret >= 0)
parents[i] = cprman->real_parent_names[ret];
}
diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c
index d5fac5a8a3d7..2163bb54a663 100644
--- a/drivers/clk/rockchip/clk.c
+++ b/drivers/clk/rockchip/clk.c
@@ -280,8 +280,8 @@ static struct clk *rockchip_clk_register_frac_branch(
struct clk *mux_clk;
int ret;
- frac->mux_frac_idx = match_string(child->parent_names,
- child->num_parents, name);
+ frac->mux_frac_idx = __match_string(child->parent_names,
+ child->num_parents, name);
frac->mux_ops = &clk_mux_ops;
frac->clk_nb.notifier_call = rockchip_clk_frac_notifier_cb;
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 34b54df41aaa..a1f79451308c 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -703,7 +703,7 @@ static ssize_t store_energy_performance_preference(
if (ret != 1)
return -EINVAL;
- ret = match_string(energy_perf_strings, -1, str_preference);
+ ret = __match_string(energy_perf_strings, -1, str_preference);
if (ret < 0)
return ret;
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index aec7bd86ae7e..527be82e1bac 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -278,7 +278,7 @@ static struct gpio_desc *of_find_regulator_gpio(struct device *dev, const char *
if (!con_id)
return ERR_PTR(-ENOENT);
- i = match_string(whitelist, ARRAY_SIZE(whitelist), con_id);
+ i = __match_string(whitelist, ARRAY_SIZE(whitelist), con_id);
if (i < 0)
return ERR_PTR(-ENOENT);
diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
index 1e5593575d23..53c55fc8b8c2 100644
--- a/drivers/gpu/drm/drm_edid_load.c
+++ b/drivers/gpu/drm/drm_edid_load.c
@@ -174,7 +174,7 @@ static void *edid_load(struct drm_connector *connector, const char *name,
int i, valid_extensions = 0;
bool print_bad_edid = !connector->bad_edid_counter || (drm_debug & DRM_UT_KMS);
- builtin = match_string(generic_edid_name, GENERIC_EDIDS, name);
+ builtin = __match_string(generic_edid_name, GENERIC_EDIDS, name);
if (builtin >= 0) {
fwdata = generic_edid[builtin];
fwsize = sizeof(generic_edid[builtin]);
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 521aff99b08a..063553adb22d 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -213,7 +213,7 @@ int drm_get_panel_orientation_quirk(int width, int height)
if (!bios_date)
continue;
- i = match_string(data->bios_dates, -1, bios_date);
+ i = __match_string(data->bios_dates, -1, bios_date);
if (i >= 0)
return data->orientation;
}
diff --git a/drivers/gpu/drm/i915/intel_pipe_crc.c b/drivers/gpu/drm/i915/intel_pipe_crc.c
index e7c7be4911c1..3e6af7600c25 100644
--- a/drivers/gpu/drm/i915/intel_pipe_crc.c
+++ b/drivers/gpu/drm/i915/intel_pipe_crc.c
@@ -440,7 +440,7 @@ display_crc_ctl_parse_source(const char *buf, enum intel_pipe_crc_source *s)
return 0;
}
- i = match_string(pipe_crc_sources, ARRAY_SIZE(pipe_crc_sources), buf);
+ i = __match_string(pipe_crc_sources, ARRAY_SIZE(pipe_crc_sources), buf);
if (i < 0)
return i;
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index fd3b5da44619..5e880a1ebcde 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -534,7 +534,7 @@ static const struct hpt_info hpt371n = {
static bool check_in_drive_list(ide_drive_t *drive, const char **list)
{
- return match_string(list, -1, (char *)&drive->id[ATA_ID_PROD]) >= 0;
+ return __match_string(list, -1, (char *)&drive->id[ATA_ID_PROD]) >= 0;
}
static struct hpt_info *hpt3xx_get_info(struct device *dev)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 800986a79704..9aaacb5bdb26 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -509,7 +509,7 @@ static int usbhs_omap_get_dt_pdata(struct device *dev,
continue;
/* get 'enum usbhs_omap_port_mode' from port mode string */
- ret = match_string(port_modes, ARRAY_SIZE(port_modes), mode);
+ ret = __match_string(port_modes, ARRAY_SIZE(port_modes), mode);
if (ret < 0) {
dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
i, mode);
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index 8d07ee1b8f08..59b7a6cac995 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -821,7 +821,7 @@ static int xenon_add_phy(struct device_node *np, struct sdhci_host *host,
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
int ret;
- priv->phy_type = match_string(phy_types, NR_PHY_TYPES, phy_name);
+ priv->phy_type = __match_string(phy_types, NR_PHY_TYPES, phy_name);
if (priv->phy_type < 0) {
dev_err(mmc_dev(host->mmc),
"Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n",
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
index d4ff6b44de2c..969f09a56ba7 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
@@ -667,7 +667,7 @@ iwl_dbgfs_bt_force_ant_write(struct iwl_mvm *mvm, char *buf,
};
int ret, bt_force_ant_mode;
- ret = match_string(modes_str, ARRAY_SIZE(modes_str), buf);
+ ret = __match_string(modes_str, ARRAY_SIZE(modes_str), buf);
if (ret < 0)
return ret;
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index b45bc47d04fe..02f54802fca0 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -206,7 +206,7 @@ void pcie_ecrc_get_policy(char *str)
{
int i;
- i = match_string(ecrc_policy_str, ARRAY_SIZE(ecrc_policy_str), str);
+ i = __match_string(ecrc_policy_str, ARRAY_SIZE(ecrc_policy_str), str);
if (i < 0)
return;
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 0417213ed68b..060ba6a0a031 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -119,7 +119,7 @@ int tegra_xusb_lane_parse_dt(struct tegra_xusb_lane *lane,
if (err < 0)
return err;
- err = match_string(lane->soc->funcs, lane->soc->num_funcs, function);
+ err = __match_string(lane->soc->funcs, lane->soc->num_funcs, function);
if (err < 0) {
dev_err(dev, "invalid function \"%s\" for lane \"%pOFn\"\n",
function, np);
@@ -568,7 +568,7 @@ static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
usb2->internal = of_property_read_bool(np, "nvidia,internal");
if (!of_property_read_string(np, "mode", &mode)) {
- int err = match_string(modes, ARRAY_SIZE(modes), mode);
+ int err = __match_string(modes, ARRAY_SIZE(modes), mode);
if (err < 0) {
dev_err(&port->dev, "invalid value %s for \"mode\"\n",
mode);
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index 6462d3ca7ceb..07a5bcaa0067 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -348,7 +348,7 @@ static int armada_37xx_pmx_set_by_name(struct pinctrl_dev *pctldev,
dev_dbg(info->dev, "enable function %s group %s\n",
name, grp->name);
- func = match_string(grp->funcs, NB_FUNCS, name);
+ func = __match_string(grp->funcs, NB_FUNCS, name);
if (func < 0)
return -ENOTSUPP;
@@ -938,7 +938,7 @@ static int armada_37xx_fill_func(struct armada_37xx_pinctrl *info)
struct armada_37xx_pin_group *gp = &info->groups[g];
int f;
- f = match_string(gp->funcs, NB_FUNCS, name);
+ f = __match_string(gp->funcs, NB_FUNCS, name);
if (f < 0)
continue;
diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index 4d0cc1889dd9..041326d0ab7b 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -348,7 +348,7 @@ int pinmux_map_to_setting(const struct pinctrl_map *map,
}
if (map->data.mux.group) {
group = map->data.mux.group;
- ret = match_string(groups, num_groups, group);
+ ret = __match_string(groups, num_groups, group);
if (ret < 0) {
dev_err(pctldev->dev,
"invalid group \"%s\" for function \"%s\"\n",
diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
index 708fd58cd62b..1cf3b43a41e4 100644
--- a/drivers/power/supply/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -858,7 +858,7 @@ static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data)
* For all psy where the name of your driver
* appears in any supplied_to
*/
- j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+ j = __match_string(supplicants, ext->num_supplicants, psy->desc->name);
if (j < 0)
return 0;
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index 98b335042ba6..8094f38e4085 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -1876,7 +1876,7 @@ static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data)
di = to_ab8500_charger_usb_device_info(usb_chg);
/* For all psy where the driver name appears in any supplied_to */
- j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+ j = __match_string(supplicants, ext->num_supplicants, psy->desc->name);
if (j < 0)
return 0;
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 776102c31305..408339c5a4a8 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -2174,7 +2174,7 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
* For all psy where the name of your driver
* appears in any supplied_to
*/
- j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+ j = __match_string(supplicants, ext->num_supplicants, psy->desc->name);
if (j < 0)
return 0;
diff --git a/drivers/power/supply/abx500_chargalg.c b/drivers/power/supply/abx500_chargalg.c
index 947709cdd14e..b2fcd0ba379d 100644
--- a/drivers/power/supply/abx500_chargalg.c
+++ b/drivers/power/supply/abx500_chargalg.c
@@ -946,7 +946,7 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data)
psy = (struct power_supply *)data;
di = power_supply_get_drvdata(psy);
/* For all psy where the driver name appears in any supplied_to */
- j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+ j = __match_string(supplicants, ext->num_supplicants, psy->desc->name);
if (j < 0)
return 0;
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index a6900aa0d2ed..70e758e4f4f4 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -2022,8 +2022,8 @@ void cm_notify_event(struct power_supply *psy, enum cm_event_types type,
mutex_lock(&cm_list_mtx);
list_for_each_entry(cm, &cm_list, entry) {
- if (match_string(cm->desc->psy_charger_stat, -1,
- psy->desc->name) >= 0) {
+ if (__match_string(cm->desc->psy_charger_stat, -1,
+ psy->desc->name) >= 0) {
found_power_supply = true;
break;
}
diff --git a/drivers/staging/gdm724x/gdm_tty.c b/drivers/staging/gdm724x/gdm_tty.c
index 6e813693a766..6e147a324652 100644
--- a/drivers/staging/gdm724x/gdm_tty.c
+++ b/drivers/staging/gdm724x/gdm_tty.c
@@ -56,8 +56,8 @@ static int gdm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
struct gdm *gdm = NULL;
int ret;
- ret = match_string(DRIVER_STRING, TTY_MAX_COUNT,
- tty->driver->driver_name);
+ ret = __match_string(DRIVER_STRING, TTY_MAX_COUNT,
+ tty->driver->driver_name);
if (ret < 0)
return -ENODEV;
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index 18f5dcf58b0d..97f87d758e8a 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -84,7 +84,7 @@ enum usb_device_speed usb_get_maximum_speed(struct device *dev)
if (ret < 0)
return USB_SPEED_UNKNOWN;
- ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed);
+ ret = __match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed);
return (ret < 0) ? USB_SPEED_UNKNOWN : ret;
}
@@ -122,7 +122,7 @@ static enum usb_dr_mode usb_get_dr_mode_from_string(const char *str)
{
int ret;
- ret = match_string(usb_dr_modes, ARRAY_SIZE(usb_dr_modes), str);
+ ret = __match_string(usb_dr_modes, ARRAY_SIZE(usb_dr_modes), str);
return (ret < 0) ? USB_DR_MODE_UNKNOWN : ret;
}
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index 2eb623841847..4abc5a76ec51 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1409,8 +1409,8 @@ EXPORT_SYMBOL_GPL(typec_set_pwr_opmode);
*/
int typec_find_port_power_role(const char *name)
{
- return match_string(typec_port_power_roles,
- ARRAY_SIZE(typec_port_power_roles), name);
+ return __match_string(typec_port_power_roles,
+ ARRAY_SIZE(typec_port_power_roles), name);
}
EXPORT_SYMBOL_GPL(typec_find_port_power_role);
@@ -1424,7 +1424,7 @@ EXPORT_SYMBOL_GPL(typec_find_port_power_role);
*/
int typec_find_power_role(const char *name)
{
- return match_string(typec_roles, ARRAY_SIZE(typec_roles), name);
+ return __match_string(typec_roles, ARRAY_SIZE(typec_roles), name);
}
EXPORT_SYMBOL_GPL(typec_find_power_role);
@@ -1438,8 +1438,8 @@ EXPORT_SYMBOL_GPL(typec_find_power_role);
*/
int typec_find_port_data_role(const char *name)
{
- return match_string(typec_port_data_roles,
- ARRAY_SIZE(typec_port_data_roles), name);
+ return __match_string(typec_port_data_roles,
+ ARRAY_SIZE(typec_port_data_roles), name);
}
EXPORT_SYMBOL_GPL(typec_find_port_data_role);
diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c
index c674abe3cf99..0389e4391faf 100644
--- a/drivers/usb/typec/tps6598x.c
+++ b/drivers/usb/typec/tps6598x.c
@@ -423,7 +423,7 @@ static int tps6598x_check_mode(struct tps6598x *tps)
if (ret)
return ret;
- switch (match_string(modes, ARRAY_SIZE(modes), mode)) {
+ switch (__match_string(modes, ARRAY_SIZE(modes), mode)) {
case TPS_MODE_APP:
return 0;
case TPS_MODE_BOOT:
diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index 82fcf07fa9ea..01c7bb7316fb 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -638,9 +638,9 @@ static bool vfio_dev_whitelisted(struct device *dev, struct device_driver *drv)
return true;
}
- return match_string(vfio_driver_whitelist,
- ARRAY_SIZE(vfio_driver_whitelist),
- drv->name) >= 0;
+ return __match_string(vfio_driver_whitelist,
+ ARRAY_SIZE(vfio_driver_whitelist),
+ drv->name) >= 0;
}
/*
diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index d59c8a59f582..0025781e6e1e 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -2129,7 +2129,7 @@ static int of_get_pxafb_display(struct device *dev, struct device_node *disp,
if (ret)
s = "color-tft";
- i = match_string(lcd_types, -1, s);
+ i = __match_string(lcd_types, -1, s);
if (i < 0) {
dev_err(dev, "lcd-type %s is unknown\n", s);
return i;
diff --git a/fs/ubifs/auth.c b/fs/ubifs/auth.c
index 60f43b93d06e..076feb5a9cb6 100644
--- a/fs/ubifs/auth.c
+++ b/fs/ubifs/auth.c
@@ -216,8 +216,8 @@ int ubifs_init_authentication(struct ubifs_info *c)
return -EINVAL;
}
- c->auth_hash_algo = match_string(hash_algo_name, HASH_ALGO__LAST,
- c->auth_hash_name);
+ c->auth_hash_algo = __match_string(hash_algo_name, HASH_ALGO__LAST,
+ c->auth_hash_name);
if ((int)c->auth_hash_algo < 0) {
ubifs_err(c, "Unknown hash algo %s specified",
c->auth_hash_name);
diff --git a/include/linux/string.h b/include/linux/string.h
index 4deb11f7976b..7149fcdf62df 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -195,7 +195,7 @@ static inline int strtobool(const char *s, bool *res)
return kstrtobool(s, res);
}
-int match_string(const char * const *array, size_t n, const char *string);
+int __match_string(const char * const *array, size_t n, const char *string);
int __sysfs_match_string(const char * const *array, size_t n, const char *s);
/**
diff --git a/kernel/cgroup/rdma.c b/kernel/cgroup/rdma.c
index 1d75ae7f1cb7..65d4df148603 100644
--- a/kernel/cgroup/rdma.c
+++ b/kernel/cgroup/rdma.c
@@ -367,7 +367,7 @@ static int parse_resource(char *c, int *intval)
if (!name || !value)
return -EINVAL;
- i = match_string(rdmacg_resource_names, RDMACG_RESOURCE_MAX, name);
+ i = __match_string(rdmacg_resource_names, RDMACG_RESOURCE_MAX, name);
if (i < 0)
return i;
diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index 678bfb9bd87f..ef89323c1541 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -111,7 +111,7 @@ static int sched_feat_set(char *cmp)
cmp += 3;
}
- i = match_string(sched_feat_names, __SCHED_FEAT_NR, cmp);
+ i = __match_string(sched_feat_names, __SCHED_FEAT_NR, cmp);
if (i < 0)
return i;
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 1c80521fd436..a818c6145d94 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -4625,7 +4625,7 @@ static int trace_set_options(struct trace_array *tr, char *option)
mutex_lock(&trace_types_lock);
- ret = match_string(trace_options, -1, cmp);
+ ret = __match_string(trace_options, -1, cmp);
/* If no option could be set, test the specific tracer options */
if (ret < 0)
ret = set_tracer_option(tr, cmp, neg);
diff --git a/lib/string.c b/lib/string.c
index e2cf5acc83bd..1797cf31760c 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -666,7 +666,7 @@ bool sysfs_streq(const char *s1, const char *s2)
EXPORT_SYMBOL(sysfs_streq);
/**
- * match_string - matches given string in an array
+ * __match_string - matches given string in an array
* @array: array of strings
* @n: number of strings in the array or -1 for NULL terminated arrays
* @string: string to match with
@@ -674,7 +674,7 @@ EXPORT_SYMBOL(sysfs_streq);
* Return:
* index of a @string in the @array if matches, or %-EINVAL otherwise.
*/
-int match_string(const char * const *array, size_t n, const char *string)
+int __match_string(const char * const *array, size_t n, const char *string)
{
int index;
const char *item;
@@ -692,7 +692,7 @@ int match_string(const char * const *array, size_t n, const char *string)
return -EINVAL;
}
-EXPORT_SYMBOL(match_string);
+EXPORT_SYMBOL(__match_string);
/**
* __sysfs_match_string - matches given string in an array
@@ -700,7 +700,7 @@ EXPORT_SYMBOL(match_string);
* @n: number of strings in the array or -1 for NULL terminated arrays
* @str: string to match with
*
- * Returns index of @str in the @array or -EINVAL, just like match_string().
+ * Returns index of @str in the @array or -EINVAL, just like __match_string().
* Uses sysfs_streq instead of strcmp for matching.
*/
int __sysfs_match_string(const char * const *array, size_t n, const char *str)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 2219e747df49..97bcf4658317 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2755,7 +2755,7 @@ int mpol_parse_str(char *str, struct mempolicy **mpol)
if (flags)
*flags++ = '\0'; /* terminate mode string */
- mode = match_string(policy_modes, MPOL_MAX, str);
+ mode = __match_string(policy_modes, MPOL_MAX, str);
if (mode < 0)
goto out;
diff --git a/mm/vmpressure.c b/mm/vmpressure.c
index 4854584ec436..d43f33139568 100644
--- a/mm/vmpressure.c
+++ b/mm/vmpressure.c
@@ -378,7 +378,7 @@ int vmpressure_register_event(struct mem_cgroup *memcg,
/* Find required level */
token = strsep(&spec, ",");
- level = match_string(vmpressure_str_levels, VMPRESSURE_NUM_LEVELS, token);
+ level = __match_string(vmpressure_str_levels, VMPRESSURE_NUM_LEVELS, token);
if (level < 0) {
ret = level;
goto out;
@@ -387,7 +387,7 @@ int vmpressure_register_event(struct mem_cgroup *memcg,
/* Find optional mode */
token = strsep(&spec, ",");
if (token) {
- mode = match_string(vmpressure_str_modes, VMPRESSURE_NUM_MODES, token);
+ mode = __match_string(vmpressure_str_modes, VMPRESSURE_NUM_MODES, token);
if (mode < 0) {
ret = mode;
goto out;
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index 87500bde5a92..45d28db85e5a 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -1480,7 +1480,7 @@ static int param_set_audit(const char *val, const struct kernel_param *kp)
if (apparmor_initialized && !policy_admin_capable(NULL))
return -EPERM;
- i = match_string(audit_mode_names, AUDIT_MAX_INDEX, val);
+ i = __match_string(audit_mode_names, AUDIT_MAX_INDEX, val);
if (i < 0)
return -EINVAL;
@@ -1509,7 +1509,7 @@ static int param_set_mode(const char *val, const struct kernel_param *kp)
if (apparmor_initialized && !policy_admin_capable(NULL))
return -EPERM;
- i = match_string(aa_profile_mode_names, APPARMOR_MODE_NAMES_MAX_INDEX,
+ i = __match_string(aa_profile_mode_names, APPARMOR_MODE_NAMES_MAX_INDEX,
val);
if (i < 0)
return -EINVAL;
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 357edd140c09..618842f85f2d 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -61,7 +61,7 @@ static int __init hash_setup(char *str)
goto out;
}
- i = match_string(hash_algo_name, HASH_ALGO__LAST, str);
+ i = __match_string(hash_algo_name, HASH_ALGO__LAST, str);
if (i < 0)
return 1;
diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c
index 3d27f3378d5d..9ec5316f3bb5 100644
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -57,7 +57,7 @@ static bool detect_loud_models(struct fw_unit *unit)
if (err < 0)
return false;
- return match_string(models, ARRAY_SIZE(models), model) >= 0;
+ return __match_string(models, ARRAY_SIZE(models), model) >= 0;
}
static int name_card(struct snd_oxfw *oxfw)
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index 81af21ac1439..13c2fb75fd71 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -1086,7 +1086,7 @@ static int add_controls(struct oxygen *chip,
err = snd_ctl_add(chip->card, ctl);
if (err < 0)
return err;
- j = match_string(known_ctl_names, CONTROL_COUNT, ctl->id.name);
+ j = __match_string(known_ctl_names, CONTROL_COUNT, ctl->id.name);
if (j >= 0) {
chip->controls[j] = ctl;
ctl->private_free = oxygen_any_ctl_free;
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index ca172a4b6849..3ef743075bda 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -1405,7 +1405,7 @@ static int max98088_get_channel(struct snd_soc_component *component, const char
{
int ret;
- ret = match_string(eq_mode_name, ARRAY_SIZE(eq_mode_name), name);
+ ret = __match_string(eq_mode_name, ARRAY_SIZE(eq_mode_name), name);
if (ret < 0)
dev_err(component->dev, "Bad EQ channel name '%s'\n", name);
return ret;
diff --git a/sound/soc/codecs/max98095.c b/sound/soc/codecs/max98095.c
index 3b3a10da7f40..cd69916d5dcb 100644
--- a/sound/soc/codecs/max98095.c
+++ b/sound/soc/codecs/max98095.c
@@ -1636,7 +1636,7 @@ static int max98095_get_bq_channel(struct snd_soc_component *component,
{
int ret;
- ret = match_string(bq_mode_name, ARRAY_SIZE(bq_mode_name), name);
+ ret = __match_string(bq_mode_name, ARRAY_SIZE(bq_mode_name), name);
if (ret < 0)
dev_err(component->dev, "Bad biquad channel name '%s'\n", name);
return ret;
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 81a7a12196ff..33ccea0518b1 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -753,7 +753,7 @@ static int dapm_connect_mux(struct snd_soc_dapm_context *dapm,
item = 0;
}
- i = match_string(e->texts, e->items, control_name);
+ i = __match_string(e->texts, e->items, control_name);
if (i < 0)
return -ENODEV;
--
2.20.1
^ permalink raw reply related
* [PATCH 3/3][V2] lib: re-introduce new match_string() helper/macro
From: Alexandru Ardelean @ 2019-05-28 7:39 UTC (permalink / raw)
To: linuxppc-dev, linux-kernel, linux-ide, linux-clk,
linux-rpi-kernel, linux-arm-kernel, linux-rockchip, linux-pm,
linux-gpio, dri-devel, intel-gfx, linux-omap, linux-mmc,
linux-wireless, netdev, linux-pci, linux-tegra, devel, linux-usb,
kvm, linux-fbdev, linux-mtd, cgroups, linux-mm,
linux-security-module, linux-integrity, alsa-devel
Cc: heikki.krogerus, gregkh, andriy.shevchenko, Alexandru Ardelean
In-Reply-To: <20190528073932.25365-1-alexandru.ardelean@analog.com>
This change re-introduces `match_string()` as a macro that uses
ARRAY_SIZE() to compute the size of the array.
After this change, work can start on migrating subsystems to use this new
helper. Since the original helper is pretty used, migrating to this new one
will take a while, and will be reviewed by each subsystem.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
include/linux/string.h | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/include/linux/string.h b/include/linux/string.h
index 7149fcdf62df..34491b075449 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -198,6 +198,15 @@ static inline int strtobool(const char *s, bool *res)
int __match_string(const char * const *array, size_t n, const char *string);
int __sysfs_match_string(const char * const *array, size_t n, const char *s);
+/**
+ * match_string - matches given string in an array
+ * @_a: array of strings
+ * @_s: string to match with
+ *
+ * Helper for __match_string(). Calculates the size of @a automatically.
+ */
+#define match_string(_a, _s) __match_string(_a, ARRAY_SIZE(_a), _s)
+
/**
* sysfs_match_string - matches given string in an array
* @_a: array of strings
--
2.20.1
^ permalink raw reply related
* [PATCH 1/3][V2] lib: fix match_string() helper on -1 array size
From: Alexandru Ardelean @ 2019-05-28 7:39 UTC (permalink / raw)
To: linuxppc-dev, linux-kernel, linux-ide, linux-clk,
linux-rpi-kernel, linux-arm-kernel, linux-rockchip, linux-pm,
linux-gpio, dri-devel, intel-gfx, linux-omap, linux-mmc,
linux-wireless, netdev, linux-pci, linux-tegra, devel, linux-usb,
kvm, linux-fbdev, linux-mtd, cgroups, linux-mm,
linux-security-module, linux-integrity, alsa-devel
Cc: heikki.krogerus, gregkh, andriy.shevchenko, Alexandru Ardelean
In-Reply-To: <20190508112842.11654-1-alexandru.ardelean@analog.com>
The documentation the `_match_string()` helper mentions that `n`
should be:
* @n: number of strings in the array or -1 for NULL terminated arrays
The behavior of the function is different, in the sense that it exits on
the first NULL element in the array, regardless of whether `n` is -1 or a
positive number.
This patch changes the behavior, to exit the loop when a NULL element is
found and n == -1. Essentially, this aligns the behavior with the
doc-string.
There are currently many users of `match_string()`, and so, in order to go
through them, the next patches in the series will focus on doing some
cosmetic changes, which are aimed at grouping the users of
`match_string()`.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
Changelog v1 -> v2:
* split the initial series into just 3 patches that fix the
`match_string()` helper and start introducing a new version of this
helper, which computes array-size of static arrays
lib/string.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/lib/string.c b/lib/string.c
index 6016eb3ac73d..e2cf5acc83bd 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -681,8 +681,11 @@ int match_string(const char * const *array, size_t n, const char *string)
for (index = 0; index < n; index++) {
item = array[index];
- if (!item)
+ if (!item) {
+ if (n != (size_t)-1)
+ continue;
break;
+ }
if (!strcmp(item, string))
return index;
}
--
2.20.1
^ permalink raw reply related
* Re: brcmfmac support for BCM4359 sdio on arm64
From: Neil Armstrong @ 2019-05-28 7:28 UTC (permalink / raw)
To: Christian Hewitt, arend.vanspriel
Cc: linux-wireless, brcm80211-dev-list.pdl, brcm80211-dev-list,
Wright.Feng, Christoph Muellner
In-Reply-To: <9B1E511E-A6F7-4907-953B-537EC7F75EEE@gmail.com>
Hi,
On 28/05/2019 09:19, Christian Hewitt wrote:
> Hello Arend,
>
> Last October Christoph Müllner reported BCM4359 SDIO issues here: https://www.spinics.net/lists/linux-wireless/msg178783.html but the investigation stalled after the needs/timescale of his project forced a change to an alternate (working) module.
Following Mullner's thread, this is what I collected with various fixes found on other repos :
===========><===================================================
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index d2f788d88668..aa434b787953 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -971,6 +971,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43455),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4356),
+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4359),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_CYPRESS_4373),
{ /* end: all zeroes */ }
};
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index 927d62b3d41b..21e947fb1537 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -681,7 +681,6 @@ static u32 brcmf_chip_tcm_rambase(struct brcmf_chip_priv *ci)
case BRCM_CC_43569_CHIP_ID:
case BRCM_CC_43570_CHIP_ID:
case BRCM_CC_4358_CHIP_ID:
- case BRCM_CC_4359_CHIP_ID:
case BRCM_CC_43602_CHIP_ID:
case BRCM_CC_4371_CHIP_ID:
return 0x180000;
@@ -691,6 +690,7 @@ static u32 brcmf_chip_tcm_rambase(struct brcmf_chip_priv *ci)
case BRCM_CC_4366_CHIP_ID:
case BRCM_CC_43664_CHIP_ID:
return 0x200000;
+ case BRCM_CC_4359_CHIP_ID:
case CY_CC_4373_CHIP_ID:
return 0x160000;
default:
@@ -1339,6 +1339,7 @@ bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
switch (pub->chip) {
case BRCM_CC_4354_CHIP_ID:
case BRCM_CC_4356_CHIP_ID:
+ case BRCM_CC_4359_CHIP_ID:
case BRCM_CC_4345_CHIP_ID:
/* explicitly check SR engine enable bit */
pmu_cc3_mask = BIT(2);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index a907d7b065fa..cf90a87bda60 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -617,6 +617,7 @@ BRCMF_FW_DEF(43430A1, "brcmfmac43430-sdio");
BRCMF_FW_DEF(43455, "brcmfmac43455-sdio");
BRCMF_FW_DEF(4354, "brcmfmac4354-sdio");
BRCMF_FW_DEF(4356, "brcmfmac4356-sdio");
+BRCMF_FW_DEF(4359, "brcmfmac4359-sdio");
BRCMF_FW_DEF(4373, "brcmfmac4373-sdio");
static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
@@ -637,6 +638,7 @@ static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455),
BRCMF_FW_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354),
BRCMF_FW_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356),
+ BRCMF_FW_ENTRY(BRCM_CC_4359_CHIP_ID, 0xFFFFFFFF, 4359),
BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373)
};
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 4224902a8e22..00e3f624baf2 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -41,6 +41,7 @@
#define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf
#define SDIO_DEVICE_ID_BROADCOM_4354 0x4354
#define SDIO_DEVICE_ID_BROADCOM_4356 0x4356
+#define SDIO_DEVICE_ID_BROADCOM_4359 0x4359
#define SDIO_DEVICE_ID_CYPRESS_4373 0x4373
#define SDIO_VENDOR_ID_INTEL 0x0089
===========><===================================================
But the driver stalls, without any errors.
I haven't activated debug traces in the brcmfmac driver to investigate further.
Neil
>
> BCM4359 is also being used in an increasing number of Amlogic devices the Kodi focussed distro LibreELEC supports. I’m one of the maintainers for the distro and I’d like to assist/resume the investigation.
>
> To recap: using changes from Wright Feng that can be found here https://github.com/RobertCNelson/ti-linux-kernel-dev/blob/65f17112e1c883d3c9f3fa68837e5f9b5eb7cfad/patches/cypress/v4.14.52-2018_0928/cypress-patch/0050-brcmfmac-Add-support-for-BCM4359-SDIO-chipset.patch results in the BCM4359 device being identified but firmware loading fails:
>
> [ 8.557929] brcmfmac: F1 signature read @0x18000000=0x17294359
> [ 8.562087] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9
> [ 8.775655] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed
> [ 8.775667] brcmfmac: brcmf_sdio_verifymemory: error -84 on reading 2048 membytes at 0x0025f0c0
> [ 8.775670] brcmfmac: brcmf_sdio_download_firmware: dongle nvram file download failed
>
> See: http://ix.io/1KfY for the full dmesg output on 5.1-rc1 kernel including a splat that may or may not be related/relevant. I am using the firmware and nvram files from https://github.com/LibreELEC/brcmfmac_sdio-firmware which match files found in several other github and public repo locations. The firmware/nvram are reported working in Android.
>
> BCMDHD is also reported working with the last few commits here: https://gitlab.com/baylibre/amlogic/atv/linux/commits/narmstrong/v5.1/aml/integ-5.1-bcmdhd but LibreELEC needs to support many different boards (with many different SDIO modules) from a single OS image, so BCMDHD is not the solution we need.
>
> One additional patch I spotted mentioning BCM4359 (also from Wright Feng) was https://github.com/RobertCNelson/ti-linux-kernel-dev/blob/65f17112e1c883d3c9f3fa68837e5f9b5eb7cfad/patches/cypress/v4.14.52-2018_0928/cypress-patch/0073-non-upstream-reset-two-D11-cores-if-chip-has-two-D11.patch but it makes no difference (the dmesg log above is with this patch applied).
>
> I’m happy building test kernels but I don’t write code so I can be fed patches and can provide logs/output as long as the instructions are fairly explicit. I’ve also CC’d LibreELEC colleague and linux-amlogic maintainer Neil Armstrong who has vastly superior skills to myself and can assist. NB: If direct access to hardware would help progress things I can easily organise remote access or get board samples shipped.
>
> How to resume things again?
>
> Christian
>
^ permalink raw reply related
* brcmfmac support for BCM4359 sdio on arm64
From: Christian Hewitt @ 2019-05-28 7:19 UTC (permalink / raw)
To: arend.vanspriel
Cc: linux-wireless, brcm80211-dev-list.pdl, brcm80211-dev-list,
Wright.Feng, Neil Armstrong, Christoph Muellner
Hello Arend,
Last October Christoph Müllner reported BCM4359 SDIO issues here: https://www.spinics.net/lists/linux-wireless/msg178783.html but the investigation stalled after the needs/timescale of his project forced a change to an alternate (working) module.
BCM4359 is also being used in an increasing number of Amlogic devices the Kodi focussed distro LibreELEC supports. I’m one of the maintainers for the distro and I’d like to assist/resume the investigation.
To recap: using changes from Wright Feng that can be found here https://github.com/RobertCNelson/ti-linux-kernel-dev/blob/65f17112e1c883d3c9f3fa68837e5f9b5eb7cfad/patches/cypress/v4.14.52-2018_0928/cypress-patch/0050-brcmfmac-Add-support-for-BCM4359-SDIO-chipset.patch results in the BCM4359 device being identified but firmware loading fails:
[ 8.557929] brcmfmac: F1 signature read @0x18000000=0x17294359
[ 8.562087] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9
[ 8.775655] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed
[ 8.775667] brcmfmac: brcmf_sdio_verifymemory: error -84 on reading 2048 membytes at 0x0025f0c0
[ 8.775670] brcmfmac: brcmf_sdio_download_firmware: dongle nvram file download failed
See: http://ix.io/1KfY for the full dmesg output on 5.1-rc1 kernel including a splat that may or may not be related/relevant. I am using the firmware and nvram files from https://github.com/LibreELEC/brcmfmac_sdio-firmware which match files found in several other github and public repo locations. The firmware/nvram are reported working in Android.
BCMDHD is also reported working with the last few commits here: https://gitlab.com/baylibre/amlogic/atv/linux/commits/narmstrong/v5.1/aml/integ-5.1-bcmdhd but LibreELEC needs to support many different boards (with many different SDIO modules) from a single OS image, so BCMDHD is not the solution we need.
One additional patch I spotted mentioning BCM4359 (also from Wright Feng) was https://github.com/RobertCNelson/ti-linux-kernel-dev/blob/65f17112e1c883d3c9f3fa68837e5f9b5eb7cfad/patches/cypress/v4.14.52-2018_0928/cypress-patch/0073-non-upstream-reset-two-D11-cores-if-chip-has-two-D11.patch but it makes no difference (the dmesg log above is with this patch applied).
I’m happy building test kernels but I don’t write code so I can be fed patches and can provide logs/output as long as the instructions are fairly explicit. I’ve also CC’d LibreELEC colleague and linux-amlogic maintainer Neil Armstrong who has vastly superior skills to myself and can assist. NB: If direct access to hardware would help progress things I can easily organise remote access or get board samples shipped.
How to resume things again?
Christian
^ permalink raw reply
* Re: [PATCH V2] iw: print HE capabilities
From: John Crispin @ 2019-05-28 7:03 UTC (permalink / raw)
To: Sven Eckelmann; +Cc: Johannes Berg, linux-wireless, Shashidhar Lakkavalli
In-Reply-To: <2100673.vGQeuS8Cl6@bentobox>
On 28/05/2019 09:02, Sven Eckelmann wrote:
> On Tuesday, 28 May 2019 08:58:28 CEST John Crispin wrote:
>> Print the HE MAC/PHY capabilities and MCS/NSS sets.
>>
>> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
>> Signed-off-by: John Crispin <john@phrozen.org>
>> ---
>> Changes in V2
>> * add a missing ',' in the iftypes name list
> The patch was already added with the bugfix [1].
>
> Kind regards,
> Sven
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/jberg/iw.git/commit/?id=c741be9f6ca34411c4dbeb03dd13e0dd794713a5
oh great, Thanks !
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox