* brcm80211: ieee80211_register_hw failed, status -22
@ 2011-03-04 12:59 Sheldon Neuberger
2011-03-05 15:30 ` Arend van Spriel
0 siblings, 1 reply; 2+ messages in thread
From: Sheldon Neuberger @ 2011-03-04 12:59 UTC (permalink / raw)
To: linux-wireless
I'm using compat-wireless-2011-03-03 and when the brcm80211 module
loads at boot up, I'm getting an an error. See dmesg below.
uname -a:
Linux sheldon-lenovo 2.6.37.2-sheldon-u160lcd-powertop-1 #1 SMP Thu
Mar 3 21:22:39 EST 2011 x86_64 Intel(R) Core(TM) i5 CPU U 470 @
1.33GHz GenuineIntel GNU/Linux
lspci -vvn | grep 14e4:
04:00.0 0280: 14e4:4727 (rev 01)
Subsystem: 14e4:0510
dmesg:
s:agpgart
[ 7.502410] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 7.535645] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 7.552697] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 7.569634] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 7.586262] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 7.602587] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 7.628262] sd 0:0:0:0: rpm_resume flags 0x4
[ 7.628267] sd 0:0:0:0: rpm_resume returns 1
[ 7.636622] PM: Adding info for No Bus:eth0
[ 7.636970] atl1c 0000:03:00.0: version 1.0.1.0-NAPI
[ 7.637932] PM: Adding info for No Bus:BAT0
[ 7.657374] sd 0:0:0:0: rpm_resume flags 0x4
[ 7.657378] sd 0:0:0:0: rpm_resume returns 1
[ 7.658356] sd 0:0:0:0: rpm_resume flags 0x4
[ 7.658363] sd 0:0:0:0: rpm_resume returns 1
[ 7.662671] ACPI: Battery Slot [BAT0] (battery present)
[ 7.688581] Compat-wireless backport release:
compat-wireless-2011-01-31-25-g9d8e201
[ 7.694075] rtc_cmos 00:06: RTC can wake from S4
[ 7.695249] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
[ 7.695253] usb 2-1.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 7.695257] usb 2-1.5: Product: USB2.0-CRW
[ 7.695259] usb 2-1.5: Manufacturer: Generic
[ 7.695261] usb 2-1.5: SerialNumber: 20090516388200000
[ 7.695382] PM: Adding info for usb:2-1.5
[ 7.695454] usb 2-1.5: rpm_resume flags 0x4
[ 7.695457] usb 2-1.5: rpm_resume returns 1
[ 7.706735] Linux video capture interface: v2.00
[ 7.817342] Backport based on linux-next.git next-20110303
[ 7.818893] PM: Adding info for usb:2-1.5:1.0
[ 7.822530] usb 2-1.5: rpm_resume flags 0x4
[ 7.822533] usb 2-1.5: rpm_resume returns 1
[ 7.822640] scsi8 : usb-storage 2-1.5:1.0
[ 7.822662] PM: Adding info for scsi:host8
[ 7.822716] PM: Adding info for No Bus:host8
[ 7.822808] PM: Adding info for No Bus:ep_01
[ 7.822828] PM: Adding info for No Bus:ep_82
[ 7.822865] PM: Adding info for No Bus:usbdev2.3
[ 7.822915] PM: Adding info for No Bus:ep_00
[ 7.822922] hub 2-1:1.0: rpm_suspend flags 0x0
[ 7.822925] hub 2-1:1.0: rpm_suspend returns 0
[ 7.858372] PM: Adding info for No Bus:rtc0
[ 7.858419] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 7.874227] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 7.898401] brcm80211: module is from the staging directory, the
quality is unknown, you have been warned.
[ 7.900720] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 7.931521] usb 1-1.6: rpm_resume flags 0x4
[ 7.931526] usb 1-1.6: rpm_resume returns 1
[ 7.931543] [drm] Initialized drm 1.1.0 20060810
[ 7.931547] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0190)
[ 7.971829] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 7.971909] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.973572] PM: Adding info for No Bus:video0
[ 7.973734] PM: Adding info for No Bus:input4
[ 7.973782] input: Lenovo EasyCamera as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input4
[ 7.978551] brcm80211 0000:04:00.0: PCI INT A -> GSI 17 (level,
low) -> IRQ 17
[ 7.978560] brcm80211 0000:04:00.0: setting latency timer to 64
[ 8.008670] PM: Adding info for No Bus:0000:04:00.0
[ 8.009181] PM: Adding info for No Bus:event4
[ 8.009259] uvcvideo 1-1.6:1.0: rpm_suspend flags 0x0
[ 8.009270] uvcvideo 1-1.6:1.0: rpm_suspend returns 0
[ 8.009401] usbcore: registered new interface driver uvcvideo
[ 8.026970] USB Video Class driver (v1.0.0)
[ 8.028264] PM: Removing info for No Bus:0000:04:00.0
[ 8.028345] PM: Adding info for No Bus:0000:04:00.0
[ 8.046282] PM: Removing info for No Bus:0000:04:00.0
[ 8.046480] Found chip type AI (0x13814313)
[ 8.048297] uvcvideo 1-1.6:1.0: rpm_resume flags 0x4
[ 8.048303] usb 1-1.6: rpm_resume flags 0x0
[ 8.048306] usb 1-1.6: rpm_resume returns 1
[ 8.048311] uvcvideo 1-1.6:1.0: rpm_resume returns 0
[ 8.048451] uvcvideo 1-1.6:1.0: rpm_suspend flags 0x0
[ 8.048458] uvcvideo 1-1.6:1.0: rpm_suspend returns 0
[ 8.067035] Changing max_res_mask to 0xffff
[ 8.083136] Changing min_res_mask to 0x200d
[ 8.104910] Applying 4313 WARs
[ 8.120917] hda_codec: ALC269VB: BIOS auto-probing.
[ 8.121379] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x510
macaddr: ac:81:12:3a:59:4f
[ 8.121528] ------------[ cut here ]------------
[ 8.121539] WARNING: at
/home/sheldon/compat-wireless-2011-03-03/net/wireless/core.c:475
wiphy_register+0x2de/0x340 [cfg80211]()
[ 8.121542] Hardware name: 08945LU
[ 8.121543] Modules linked in: snd_hda_codec_realtek i915(+)
brcm80211(C+) drm_kms_helper uvcvideo drm snd_hda_intel(+)
snd_hda_codec mac80211 snd_hwdep snd_pcm videodev rtc_cmos compat
i2c_algo_bit v4l1_compat intel_agp v4l2_compat_ioctl32 atl1c acer_wmi
rtc_core cfg80211 evdev intel_gtt snd_timer battery i2c_i801 psmouse
rtc_lib sg video ac serio_raw snd agpgart shpchp processor thermal
btusb i2c_core output wmi button thermal_sys hwmon soundcore
snd_page_alloc bluetooth rfkill
[ 8.121571] Pid: 1504, comm: modprobe Tainted: G C
2.6.37.2-sheldon-u160lcd-powertop-1 #1
[ 8.121574] Call Trace:
[ 8.121586] [<ffffffff8104c2df>] warn_slowpath_common+0x7f/0xc0
[ 8.121590] [<ffffffff8104c33a>] warn_slowpath_null+0x1a/0x20
[ 8.121595] [<ffffffffa026223e>] wiphy_register+0x2de/0x340 [cfg80211]
[ 8.121601] [<ffffffff811135f7>] ? __kmalloc+0x127/0x1f0
[ 8.121610] [<ffffffffa02af22f>] ?
ieee80211_register_hw+0x9f/0x590 [mac80211]
[ 8.121615] [<ffffffffa02af323>] ieee80211_register_hw+0x193/0x590
[mac80211]
[ 8.121639] [<ffffffffa03468c5>] wl_pci_probe+0x656/0x7a0 [brcm80211]
[ 8.121645] [<ffffffff815f910e>] ? __pm_runtime_set_status+0x12e/0x200
[ 8.121650] [<ffffffff81567a3f>] local_pci_probe+0x5f/0xd0
[ 8.121654] [<ffffffff81568118>] pci_device_probe+0x88/0xb0
[ 8.121659] [<ffffffff815ef53a>] ? driver_sysfs_add+0x7a/0xb0
[ 8.121662] [<ffffffff815ef826>] driver_probe_device+0x96/0x1c0
[ 8.121666] [<ffffffff815ef9fb>] __driver_attach+0xab/0xb0
[ 8.121669] [<ffffffff815ef950>] ? __driver_attach+0x0/0xb0
[ 8.121672] [<ffffffff815ee73e>] bus_for_each_dev+0x5e/0x90
[ 8.121676] [<ffffffff815ef4be>] driver_attach+0x1e/0x20
[ 8.121679] [<ffffffff815eefe5>] bus_add_driver+0xd5/0x2d0
[ 8.121691] [<ffffffffa0159000>] ? wl_module_init+0x0/0x84 [brcm80211]
[ 8.121694] [<ffffffff815efc86>] driver_register+0x76/0x140
[ 8.121698] [<ffffffff81072cfd>] ? notifier_call_chain+0x4d/0x70
[ 8.121710] [<ffffffffa0159000>] ? wl_module_init+0x0/0x84 [brcm80211]
[ 8.121714] [<ffffffff815683b6>] __pci_register_driver+0x56/0xd0
[ 8.121725] [<ffffffffa0159082>] wl_module_init+0x82/0x84 [brcm80211]
[ 8.121729] [<ffffffff81000304>] do_one_initcall+0x44/0x170
[ 8.121733] [<ffffffff81088073>] sys_init_module+0xc3/0x210
[ 8.121736] [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b
[ 8.121739] ---[ end trace a8bbcf613a799428 ]---
[ 8.121742] wl_attach: ieee80211_register_hw failed, status -22
[ 8.121744] wl_set_hint: Sending country code US to MAC80211
[ 8.121750] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver 5.75.11
(1.82.8.0) (Compiled in . at 23:11:48 on Mar 3 2011)
[ 8.333625] Unable to query Synaptics hardware.
[ 9.585913] scsi host8: rpm_resume flags 0x4
[ 9.585918] scsi host8: rpm_resume returns 1
[ 9.585922] scsi host8: rpm_resume flags 0x4
[ 9.585924] scsi host8: rpm_resume returns 1
[ 9.585950] scsi target8:0:0: rpm_resume flags 0x4
[ 9.585952] scsi target8:0:0: rpm_resume returns -11
[ 9.588517] scsi 8:0:0:0: Direct-Access Generic- Multi-Card
1.00 PQ: 0 ANSI: 0 CCS
[ 9.608744] PM: Adding info for scsi:target8:0:0
[ 9.608797] scsi target8:0:0: rpm_resume flags 0x4
[ 9.608807] scsi target8:0:0: rpm_resume returns 1
[ 9.608815] scsi 8:0:0:0: rpm_resume flags 0x0
[ 9.608823] scsi 8:0:0:0: rpm_resume returns -11
[ 9.608831] scsi 8:0:0:0: rpm_resume flags 0x4
[ 9.608837] scsi 8:0:0:0: rpm_resume returns 1
[ 9.608921] PM: Adding info for scsi:8:0:0:0
[ 9.609042] PM: Adding info for No Bus:8:0:0:0
[ 9.609122] PM: Adding info for No Bus:8:0:0:0
[ 9.609281] PM: Adding info for No Bus:sg1
[ 9.609348] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 9.626102] PM: Adding info for No Bus:8:0:0:0
[ 9.626359] PM: Adding info for No Bus:8:16
[ 9.626407] scsi target8:0:1: rpm_resume flags 0x4
[ 9.626411] scsi target8:0:1: rpm_resume returns -11
[ 9.626425] PM: Adding info for No Bus:sdb
[ 9.626488] scsi target8:0:2: rpm_resume flags 0x4
[ 9.626492] scsi target8:0:2: rpm_resume returns -11
[ 9.629268] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 9.631082] scsi target8:0:3: rpm_resume flags 0x4
[ 9.631087] scsi target8:0:3: rpm_resume returns -11
[ 9.631182] scsi target8:0:4: rpm_resume flags 0x4
[ 9.631185] scsi target8:0:4: rpm_resume returns -11
[ 9.631265] scsi target8:0:5: rpm_resume flags 0x4
[ 9.631269] scsi target8:0:5: rpm_resume returns -11
[ 9.631346] scsi target8:0:6: rpm_resume flags 0x4
[ 9.631350] scsi target8:0:6: rpm_resume returns -11
[ 9.631426] scsi target8:0:7: rpm_resume flags 0x4
[ 9.631429] scsi target8:0:7: rpm_resume returns -11
[ 9.634076] sd 8:0:0:0: rpm_resume flags 0x4
[ 9.634084] sd 8:0:0:0: rpm_resume returns 1
[ 9.651826] PM: Adding info for No Bus:card0
[ 9.651895] PM: Adding info for No Bus:pcmC0D7p
[ 9.651944] PM: Adding info for No Bus:pcmC0D3p
[ 9.651984] PM: Adding info for No Bus:pcmC0D0p
[ 9.652024] PM: Adding info for No Bus:pcmC0D0c
[ 9.652069] PM: Adding info for No Bus:input5
[ 9.652089] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 9.670934] PM: Adding info for No Bus:event5
[ 9.671018] PM: Adding info for No Bus:input6
[ 9.671052] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 9.690541] PM: Adding info for No Bus:event6
[ 9.690630] PM: Adding info for No Bus:hwC0D3
[ 9.690714] PM: Adding info for No Bus:hwC0D0
[ 9.690809] PM: Adding info for No Bus:controlC0
[ 9.690878] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.706831] i915 0000:00:02.0: setting latency timer to 64
[ 9.708698] PM: Adding info for No Bus:controlD64
[ 9.708886] PM: Adding info for No Bus:card0
[ 9.809793] PM: Adding info for i2c:i2c-0
[ 9.809900] PM: Adding info for i2c:i2c-1
[ 9.809980] PM: Adding info for i2c:i2c-2
[ 9.810019] PM: Adding info for i2c:i2c-3
[ 9.810054] PM: Adding info for i2c:i2c-4
[ 9.810086] PM: Adding info for i2c:i2c-5
[ 9.810119] PM: Adding info for i2c:i2c-6
[ 9.810150] PM: Adding info for i2c:i2c-7
[ 9.810183] PM: Adding info for i2c:i2c-8
[ 9.810214] PM: Adding info for i2c:i2c-9
[ 9.810247] PM: Adding info for i2c:i2c-10
[ 9.810280] PM: Adding info for i2c:i2c-11
[ 9.810313] PM: Adding info for i2c:i2c-12
[ 9.810345] PM: Adding info for i2c:i2c-13
[ 9.810488] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 9.873921] PM: Adding info for No Bus:card0-LVDS-1
[ 9.874043] PM: Adding info for No Bus:card0-VGA-1
[ 9.874131] PM: Adding info for i2c:i2c-14
[ 9.876495] PM: Removing info for i2c:i2c-14
[ 9.876617] PM: Adding info for No Bus:card0-HDMI-A-1
[ 9.876752] PM: Adding info for No Bus:card0-DP-1
[ 9.877851] PM: Adding info for i2c:i2c-14
[ 9.877905] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.885692] usb 1-1.2: rpm_suspend flags 0x1
[ 9.885702] usb 1-1.2: rpm_suspend returns 0
[ 9.885714] usb 1-1.2: rpm_suspend flags 0x2
[ 9.896690] usb 1-1.2: rpm_suspend returns 0
[ 9.933865] checking generic (d0000000 3ff0000) vs hw (d0000000 10000000)
[ 9.933875] fb: conflicting fb hw usage inteldrmfb vs VESA VGA -
removing generic driver
[ 9.935814] Console: switching to colour dummy device 80x25
[ 9.935863] PM: Removing info for No Bus:fb0
[ 9.935995] PM: Removing info for No Bus:vtcon1
[ 9.936469] PM: Adding info for No Bus:fb0
[ 9.936546] PM: Adding info for No Bus:vtcon1
[ 9.991542] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max
PWM is zero.
[ 9.991569] Console: switching to colour frame buffer device 170x48
[ 10.000213] fb0: inteldrmfb frame buffer device
[ 10.000279] drm: registered panic notifier
[ 10.040598] PM: Adding info for No Bus:acpi_video0
[ 10.044564] PM: Adding info for No Bus:cooling_device4
[ 10.044584] acpi device:07: registered as cooling_device4
[ 10.044663] PM: Adding info for No Bus:acpi_video0
[ 10.045004] PM: Adding info for No Bus:input7
[ 10.045032] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 10.045130] PM: Adding info for No Bus:event7
[ 10.045143] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.045425] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.101670] sd 0:0:0:0: rpm_resume flags 0x4
[ 10.101680] sd 0:0:0:0: rpm_resume returns 1
[ 10.103228] sd 0:0:0:0: rpm_resume flags 0x4
[ 10.103231] sd 0:0:0:0: rpm_resume returns 1
[ 10.181761] PM: Adding info for No Bus:input8
[ 10.181805] input: PS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input8
[ 10.181960] PM: Adding info for No Bus:mouse0
[ 10.182022] PM: Adding info for No Bus:event8
[ 10.876482] usb 1-1.6: rpm_suspend flags 0x1
[ 10.876492] usb 1-1.6: rpm_suspend returns 0
[ 10.876508] usb 1-1.6: rpm_suspend flags 0x2
[ 10.887425] usb 1-1.6: rpm_suspend returns 0
[ 13.880726] usb 1-1: rpm_suspend flags 0x1
[ 13.880736] usb 1-1: rpm_suspend returns 0
[ 13.880751] usb 1-1: rpm_suspend flags 0x2
[ 13.891581] usb 1-1: rpm_suspend returns 0
[ 14.276290] Adding 4886304k swap on /dev/sda2. Priority:-1
extents:1 across:4886304k SS
[ 14.324217] fuse init (API version 7.15)
[ 14.324533] PM: Adding info for No Bus:fuse
[ 14.493930] sd 0:0:0:0: rpm_resume flags 0x4
[ 14.493935] sd 0:0:0:0: rpm_resume returns 1
[ 14.494112] EXT4-fs (sda1): re-mounted. Opts: discard
[ 14.506894] EXT4-fs (sda1): re-mounted. Opts: discard
[ 14.640154] PM: Adding info for platform:parport_pc.956
[ 14.640198] PM: Removing info for platform:parport_pc.956
[ 14.640252] PM: Adding info for platform:parport_pc.888
[ 14.640317] PM: Removing info for platform:parport_pc.888
[ 14.640370] PM: Adding info for platform:parport_pc.632
[ 14.640416] PM: Removing info for platform:parport_pc.632
[ 14.651184] lp: driver loaded but no devices found
[ 14.651548] ppdev: user-space parallel port driver
[ 16.868825] usb usb1: rpm_suspend flags 0x1
[ 16.868832] usb usb1: rpm_suspend returns 0
[ 16.868851] usb usb1: rpm_suspend flags 0x2
[ 16.868886] usb usb1: rpm_suspend returns 0
[ 17.986047] atl1c 0000:03:00.0: irq 43 for MSI/MSI-X
[ 36.538530] NET: Registered protocol family 10
[ 36.538739] lo: Disabled Privacy Extensions
[ 36.538858] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.346988] uvcvideo 1-1.6:1.0: rpm_resume flags 0x4
[ 37.346995] usb 1-1.6: rpm_resume flags 0x0
[ 37.346999] usb 1-1: rpm_resume flags 0x0
[ 37.347002] usb usb1: rpm_resume flags 0x0
[ 37.347006] ehci_hcd 0000:00:1a.0: rpm_resume flags 0x0
[ 37.347009] ehci_hcd 0000:00:1a.0: rpm_resume returns 1
[ 37.360282] sd 8:0:0:0: rpm_resume flags 0x4
[ 37.360289] sd 0:0:0:0: rpm_resume flags 0x4
[ 37.360295] sd 0:0:0:0: rpm_resume returns 1
[ 37.360299] sd 8:0:0:0: rpm_resume returns 1
[ 37.360427] sd 0:0:0:0: rpm_resume flags 0x4
[ 37.360431] sd 0:0:0:0: rpm_resume returns 1
[ 37.366480] usb usb1: rpm_resume returns 0
[ 37.366685] hub 1-0:1.0: rpm_resume flags 0x4
[ 37.366690] usb usb1: rpm_resume flags 0x0
[ 37.366694] usb usb1: rpm_resume returns 1
[ 37.366698] hub 1-0:1.0: rpm_resume returns 0
[ 37.366703] hub 1-0:1.0: rpm_suspend flags 0x0
[ 37.366708] hub 1-0:1.0: rpm_suspend returns 0
[ 37.404448] usb 1-1: rpm_resume returns 0
[ 37.404454] hub 1-1:1.0: rpm_resume flags 0x4
[ 37.404458] usb 1-1: rpm_resume flags 0x0
[ 37.404462] usb 1-1: rpm_resume returns 1
[ 37.404466] hub 1-1:1.0: rpm_resume returns 0
[ 37.404470] hub 1-1:1.0: rpm_suspend flags 0x0
[ 37.404473] hub 1-1:1.0: rpm_suspend returns 0
[ 37.442508] usb 1-1.6: rpm_resume returns 0
[ 37.442515] uvcvideo 1-1.6:1.0: rpm_resume returns 0
[ 37.443451] uvcvideo 1-1.6:1.0: rpm_suspend flags 0x0
[ 37.443457] uvcvideo 1-1.6:1.0: rpm_suspend returns 0
[ 38.330993] PM: Adding info for No Bus:mixer
[ 38.339935] PM: Adding info for No Bus:dsp
[ 38.340010] PM: Adding info for No Bus:audio
[ 38.352123] PM: Adding info for No Bus:seq
[ 38.360429] PM: Adding info for No Bus:sequencer
[ 38.360490] PM: Adding info for No Bus:sequencer2
[ 38.392837] PM: Adding info for No Bus:vcs2
[ 38.392924] PM: Adding info for No Bus:vcsa2
[ 38.393086] PM: Adding info for No Bus:vcs6
[ 38.393152] PM: Adding info for No Bus:vcsa6
[ 38.394528] PM: Adding info for No Bus:vcs4
[ 38.395185] PM: Adding info for No Bus:vcsa4
[ 38.395386] PM: Adding info for No Bus:vcs5
[ 38.395630] PM: Adding info for No Bus:vcsa5
[ 38.396091] PM: Adding info for No Bus:vcs3
[ 38.396376] PM: Adding info for No Bus:vcsa3
[ 39.847330] usb 1-1.6: rpm_suspend flags 0x1
[ 39.847338] usb 1-1.6: rpm_suspend returns 0
[ 39.847352] usb 1-1.6: rpm_suspend flags 0x2
[ 39.858353] usb 1-1.6: rpm_suspend returns 0
[ 42.843519] usb 1-1: rpm_suspend flags 0x1
[ 42.843524] usb 1-1: rpm_suspend returns 0
[ 42.843541] usb 1-1: rpm_suspend flags 0x2
[ 42.854500] usb 1-1: rpm_suspend returns 0
[ 45.839666] usb usb1: rpm_suspend flags 0x1
[ 45.839672] usb usb1: rpm_suspend returns 0
[ 45.839690] usb usb1: rpm_suspend flags 0x2
[ 45.839725] usb usb1: rpm_suspend returns 0
[ 54.133714] sd 8:0:0:0: rpm_resume flags 0x4
[ 54.133720] sd 8:0:0:0: rpm_resume returns 1
[ 54.140876] sd 8:0:0:0: rpm_resume flags 0x4
[ 54.140880] sd 8:0:0:0: rpm_resume returns 1
[ 54.155041] sd 8:0:0:0: rpm_resume flags 0x4
[ 54.155051] sd 8:0:0:0: rpm_resume returns 1
[ 71.113647] sd 8:0:0:0: rpm_resume flags 0x4
[ 71.113653] sd 8:0:0:0: rpm_resume returns 1
[ 88.090778] sd 8:0:0:0: rpm_resume flags 0x4
[ 88.090784] sd 8:0:0:0: rpm_resume returns 1
[ 105.068875] sd 8:0:0:0: rpm_resume flags 0x4
[ 105.068881] sd 8:0:0:0: rpm_resume returns 1
[ 122.047093] sd 8:0:0:0: rpm_resume flags 0x4
[ 122.047106] sd 8:0:0:0: rpm_resume returns 1
[ 139.026140] sd 8:0:0:0: rpm_resume flags 0x4
[ 139.026147] sd 8:0:0:0: rpm_resume returns 1
[ 156.004497] sd 8:0:0:0: rpm_resume flags 0x4
[ 156.004503] sd 8:0:0:0: rpm_resume returns 1
[ 172.982906] sd 8:0:0:0: rpm_resume flags 0x4
[ 172.982912] sd 8:0:0:0: rpm_resume returns 1
[ 189.961148] sd 8:0:0:0: rpm_resume flags 0x4
[ 189.961154] sd 8:0:0:0: rpm_resume returns 1
[ 206.939066] sd 8:0:0:0: rpm_resume flags 0x4
[ 206.939072] sd 8:0:0:0: rpm_resume returns 1
[ 223.906692] sd 8:0:0:0: rpm_resume flags 0x4
[ 223.906698] sd 8:0:0:0: rpm_resume returns 1
[ 240.895763] sd 8:0:0:0: rpm_resume flags 0x4
[ 240.895769] sd 8:0:0:0: rpm_resume returns 1
[ 257.873881] sd 8:0:0:0: rpm_resume flags 0x4
[ 257.873887] sd 8:0:0:0: rpm_resume returns 1
[ 274.852037] sd 8:0:0:0: rpm_resume flags 0x4
[ 274.852043] sd 8:0:0:0: rpm_resume returns 1
[ 291.830138] sd 8:0:0:0: rpm_resume flags 0x4
[ 291.830144] sd 8:0:0:0: rpm_resume returns 1
[ 308.808363] sd 8:0:0:0: rpm_resume flags 0x4
[ 308.808369] sd 8:0:0:0: rpm_resume returns 1
[ 325.775905] sd 8:0:0:0: rpm_resume flags 0x4
[ 325.775910] sd 8:0:0:0: rpm_resume returns 1
[ 342.764997] sd 8:0:0:0: rpm_resume flags 0x4
[ 342.765002] sd 8:0:0:0: rpm_resume returns 1
[ 359.743252] sd 8:0:0:0: rpm_resume flags 0x4
[ 359.743258] sd 8:0:0:0: rpm_resume returns 1
[ 376.721473] sd 8:0:0:0: rpm_resume flags 0x4
[ 376.721478] sd 8:0:0:0: rpm_resume returns 1
[ 393.699733] sd 8:0:0:0: rpm_resume flags 0x4
[ 393.699739] sd 8:0:0:0: rpm_resume returns 1
[ 410.677761] sd 8:0:0:0: rpm_resume flags 0x4
[ 410.677767] sd 8:0:0:0: rpm_resume returns 1
[ 427.645592] sd 8:0:0:0: rpm_resume flags 0x4
[ 427.645598] sd 8:0:0:0: rpm_resume returns 1
[ 444.634851] sd 8:0:0:0: rpm_resume flags 0x4
[ 444.634857] sd 8:0:0:0: rpm_resume returns 1
[ 461.613026] sd 8:0:0:0: rpm_resume flags 0x4
[ 461.613032] sd 8:0:0:0: rpm_resume returns 1
[ 478.591057] sd 8:0:0:0: rpm_resume flags 0x4
[ 478.591063] sd 8:0:0:0: rpm_resume returns 1
[ 495.569289] sd 8:0:0:0: rpm_resume flags 0x4
[ 495.569295] sd 8:0:0:0: rpm_resume returns 1
[ 512.547300] sd 8:0:0:0: rpm_resume flags 0x4
[ 512.547306] sd 8:0:0:0: rpm_resume returns 1
[ 529.525474] sd 8:0:0:0: rpm_resume flags 0x4
[ 529.525487] sd 8:0:0:0: rpm_resume returns 1
[ 546.504608] sd 8:0:0:0: rpm_resume flags 0x4
[ 546.504614] sd 8:0:0:0: rpm_resume returns 1
[ 563.482561] sd 8:0:0:0: rpm_resume flags 0x4
[ 563.482567] sd 8:0:0:0: rpm_resume returns 1
[ 580.460784] sd 8:0:0:0: rpm_resume flags 0x4
[ 580.460790] sd 8:0:0:0: rpm_resume returns 1
[ 597.439008] sd 8:0:0:0: rpm_resume flags 0x4
[ 597.439014] sd 8:0:0:0: rpm_resume returns 1
[ 614.416871] sd 8:0:0:0: rpm_resume flags 0x4
[ 614.416877] sd 8:0:0:0: rpm_resume returns 1
[ 631.384723] sd 8:0:0:0: rpm_resume flags 0x4
[ 631.384728] sd 8:0:0:0: rpm_resume returns 1
[ 648.373963] sd 8:0:0:0: rpm_resume flags 0x4
[ 648.373969] sd 8:0:0:0: rpm_resume returns 1
[ 665.352152] sd 8:0:0:0: rpm_resume flags 0x4
[ 665.352158] sd 8:0:0:0: rpm_resume returns 1
[ 682.330149] sd 8:0:0:0: rpm_resume flags 0x4
[ 682.330154] sd 8:0:0:0: rpm_resume returns 1
[ 699.308373] sd 8:0:0:0: rpm_resume flags 0x4
[ 699.308379] sd 8:0:0:0: rpm_resume returns 1
[ 716.286432] sd 8:0:0:0: rpm_resume flags 0x4
[ 716.286438] sd 8:0:0:0: rpm_resume returns 1
[ 733.264639] sd 8:0:0:0: rpm_resume flags 0x4
[ 733.264644] sd 8:0:0:0: rpm_resume returns 1
[ 750.243910] sd 8:0:0:0: rpm_resume flags 0x4
[ 750.243916] sd 8:0:0:0: rpm_resume returns 1
[ 767.222015] sd 8:0:0:0: rpm_resume flags 0x4
[ 767.222021] sd 8:0:0:0: rpm_resume returns 1
[ 784.200360] sd 8:0:0:0: rpm_resume flags 0x4
[ 784.200366] sd 8:0:0:0: rpm_resume returns 1
[ 801.178534] sd 8:0:0:0: rpm_resume flags 0x4
[ 801.178540] sd 8:0:0:0: rpm_resume returns 1
[ 818.156482] sd 8:0:0:0: rpm_resume flags 0x4
[ 818.156487] sd 8:0:0:0: rpm_resume returns 1
[ 835.134217] sd 8:0:0:0: rpm_resume flags 0x4
[ 835.134222] sd 8:0:0:0: rpm_resume returns 1
[ 852.113334] sd 8:0:0:0: rpm_resume flags 0x4
[ 852.113340] sd 8:0:0:0: rpm_resume returns 1
[ 869.091383] sd 8:0:0:0: rpm_resume flags 0x4
[ 869.091388] sd 8:0:0:0: rpm_resume returns 1
[ 886.069438] sd 8:0:0:0: rpm_resume flags 0x4
[ 886.069444] sd 8:0:0:0: rpm_resume returns 1
[ 903.047432] sd 8:0:0:0: rpm_resume flags 0x4
[ 903.047439] sd 8:0:0:0: rpm_resume returns 1
[ 920.026447] sd 8:0:0:0: rpm_resume flags 0x4
[ 920.026453] sd 8:0:0:0: rpm_resume returns 1
[ 937.003830] sd 8:0:0:0: rpm_resume flags 0x4
[ 937.003843] sd 8:0:0:0: rpm_resume returns 1
[ 953.983071] sd 8:0:0:0: rpm_resume flags 0x4
[ 953.983076] sd 8:0:0:0: rpm_resume returns 1
[ 970.961017] sd 8:0:0:0: rpm_resume flags 0x4
[ 970.961023] sd 8:0:0:0: rpm_resume returns 1
[ 987.939006] sd 8:0:0:0: rpm_resume flags 0x4
[ 987.939012] sd 8:0:0:0: rpm_resume returns 1
[ 1004.917008] sd 8:0:0:0: rpm_resume flags 0x4
[ 1004.917014] sd 8:0:0:0: rpm_resume returns 1
[ 1021.896125] sd 8:0:0:0: rpm_resume flags 0x4
[ 1021.896130] sd 8:0:0:0: rpm_resume returns 1
[ 1038.873427] sd 8:0:0:0: rpm_resume flags 0x4
[ 1038.873439] sd 8:0:0:0: rpm_resume returns 1
[ 1055.852432] sd 8:0:0:0: rpm_resume flags 0x4
[ 1055.852438] sd 8:0:0:0: rpm_resume returns 1
[ 1072.830616] sd 8:0:0:0: rpm_resume flags 0x4
[ 1072.830621] sd 8:0:0:0: rpm_resume returns 1
[ 1089.808787] sd 8:0:0:0: rpm_resume flags 0x4
[ 1089.808792] sd 8:0:0:0: rpm_resume returns 1
[ 1106.786818] sd 8:0:0:0: rpm_resume flags 0x4
[ 1106.786823] sd 8:0:0:0: rpm_resume returns 1
[ 1123.764909] sd 8:0:0:0: rpm_resume flags 0x4
[ 1123.764915] sd 8:0:0:0: rpm_resume returns 1
[ 1140.732898] sd 8:0:0:0: rpm_resume flags 0x4
[ 1140.732904] sd 8:0:0:0: rpm_resume returns 1
[ 1157.722173] sd 8:0:0:0: rpm_resume flags 0x4
[ 1157.722178] sd 8:0:0:0: rpm_resume returns 1
[ 1174.700496] sd 8:0:0:0: rpm_resume flags 0x4
[ 1174.700502] sd 8:0:0:0: rpm_resume returns 1
[ 1191.678373] sd 8:0:0:0: rpm_resume flags 0x4
[ 1191.678379] sd 8:0:0:0: rpm_resume returns 1
[ 1208.656500] sd 8:0:0:0: rpm_resume flags 0x4
[ 1208.656506] sd 8:0:0:0: rpm_resume returns 1
[ 1225.634527] sd 8:0:0:0: rpm_resume flags 0x4
[ 1225.634532] sd 8:0:0:0: rpm_resume returns 1
[ 1242.602069] sd 8:0:0:0: rpm_resume flags 0x4
[ 1242.602076] sd 8:0:0:0: rpm_resume returns 1
[ 1259.591251] sd 8:0:0:0: rpm_resume flags 0x4
[ 1259.591257] sd 8:0:0:0: rpm_resume returns 1
[ 1276.569682] sd 8:0:0:0: rpm_resume flags 0x4
[ 1276.569688] sd 8:0:0:0: rpm_resume returns 1
[ 1293.547856] sd 8:0:0:0: rpm_resume flags 0x4
[ 1293.547862] sd 8:0:0:0: rpm_resume returns 1
[ 1310.526259] sd 8:0:0:0: rpm_resume flags 0x4
[ 1310.526264] sd 8:0:0:0: rpm_resume returns 1
[ 1327.504255] sd 8:0:0:0: rpm_resume flags 0x4
[ 1327.504261] sd 8:0:0:0: rpm_resume returns 1
[ 1344.472135] sd 8:0:0:0: rpm_resume flags 0x4
[ 1344.472140] sd 8:0:0:0: rpm_resume returns 1
[ 1361.461341] sd 8:0:0:0: rpm_resume flags 0x4
[ 1361.461347] sd 8:0:0:0: rpm_resume returns 1
[ 1374.774686] hub 2-1:1.0: rpm_resume flags 0x4
[ 1374.774692] usb 2-1: rpm_resume flags 0x0
[ 1374.774695] usb 2-1: rpm_resume returns 1
[ 1374.774699] hub 2-1:1.0: rpm_resume returns 0
[ 1374.952451] usb 2-1.3: new high speed USB device using ehci_hcd and address 4
[ 1375.037345] usb 2-1.3: rpm_resume flags 0x0
[ 1375.037349] usb 2-1.3: rpm_resume returns -11
[ 1375.083154] usb 2-1.3: New USB device found, idVendor=1307, idProduct=0165
[ 1375.083159] usb 2-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1375.083163] usb 2-1.3: Product: USB Mass Storage Device
[ 1375.083166] usb 2-1.3: Manufacturer: USBest Technology
[ 1375.083169] usb 2-1.3: SerialNumber: 1001095703c1c5
[ 1375.083292] PM: Adding info for usb:2-1.3
[ 1375.083340] usb 2-1.3: rpm_resume flags 0x4
[ 1375.083344] usb 2-1.3: rpm_resume returns 1
[ 1375.083545] PM: Adding info for usb:2-1.3:1.0
[ 1375.083603] usb 2-1.3: rpm_resume flags 0x4
[ 1375.083608] usb 2-1.3: rpm_resume returns 1
[ 1375.083691] scsi9 : usb-storage 2-1.3:1.0
[ 1375.083730] PM: Adding info for scsi:host9
[ 1375.083805] PM: Adding info for No Bus:host9
[ 1375.083915] PM: Adding info for No Bus:ep_01
[ 1375.083966] PM: Adding info for No Bus:ep_82
[ 1375.084022] PM: Adding info for No Bus:ep_83
[ 1375.084073] PM: Adding info for No Bus:usbdev2.4
[ 1375.084187] PM: Adding info for No Bus:ep_00
[ 1375.084194] hub 2-1:1.0: rpm_suspend flags 0x0
[ 1375.084200] hub 2-1:1.0: rpm_suspend returns 0
[ 1376.082056] scsi host9: rpm_resume flags 0x4
[ 1376.082062] scsi host9: rpm_resume returns 1
[ 1376.082066] scsi host9: rpm_resume flags 0x4
[ 1376.082069] scsi host9: rpm_resume returns 1
[ 1376.082092] scsi target9:0:0: rpm_resume flags 0x4
[ 1376.082095] scsi target9:0:0: rpm_resume returns -11
[ 1376.082831] scsi 9:0:0:0: Direct-Access EDGE DiskGO
0.00 PQ: 0 ANSI: 2
[ 1376.082871] PM: Adding info for scsi:target9:0:0
[ 1376.082899] scsi target9:0:0: rpm_resume flags 0x4
[ 1376.082903] scsi target9:0:0: rpm_resume returns 1
[ 1376.082907] scsi 9:0:0:0: rpm_resume flags 0x0
[ 1376.082911] scsi 9:0:0:0: rpm_resume returns -11
[ 1376.082915] scsi 9:0:0:0: rpm_resume flags 0x4
[ 1376.082918] scsi 9:0:0:0: rpm_resume returns 1
[ 1376.082965] PM: Adding info for scsi:9:0:0:0
[ 1376.083056] PM: Adding info for No Bus:9:0:0:0
[ 1376.083109] PM: Adding info for No Bus:9:0:0:0
[ 1376.083214] PM: Adding info for No Bus:sg2
[ 1376.083292] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 1376.083360] PM: Adding info for No Bus:9:0:0:0
[ 1376.083491] scsi target9:0:1: rpm_resume flags 0x4
[ 1376.083496] scsi target9:0:1: rpm_resume returns -11
[ 1376.084106] sd 9:0:0:0: [sdc] 1974272 512-byte logical blocks:
(1.01 GB/964 MiB)
[ 1376.084258] scsi target9:0:2: rpm_resume flags 0x4
[ 1376.084269] scsi target9:0:2: rpm_resume returns -11
[ 1376.084796] sd 9:0:0:0: [sdc] Write Protect is off
[ 1376.084810] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 1376.084819] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 1376.084949] PM: Adding info for No Bus:8:32
[ 1376.085111] PM: Adding info for No Bus:sdc
[ 1376.085155] sd 9:0:0:0: rpm_resume flags 0x4
[ 1376.085165] sd 9:0:0:0: rpm_resume returns 1
[ 1376.085307] scsi target9:0:3: rpm_resume flags 0x4
[ 1376.085316] scsi target9:0:3: rpm_resume returns -11
[ 1376.085710] scsi target9:0:4: rpm_resume flags 0x4
[ 1376.085721] scsi target9:0:4: rpm_resume returns -11
[ 1376.086867] scsi target9:0:5: rpm_resume flags 0x4
[ 1376.086878] scsi target9:0:5: rpm_resume returns -11
[ 1376.087101] scsi target9:0:6: rpm_resume flags 0x4
[ 1376.087110] scsi target9:0:6: rpm_resume returns -11
[ 1376.087501] scsi target9:0:7: rpm_resume flags 0x4
[ 1376.087511] scsi target9:0:7: rpm_resume returns -11
[ 1376.088027] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 1376.208120] sdc:
[ 1376.209769] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 1376.209775] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 1376.214278] sd 9:0:0:0: rpm_resume flags 0x4
[ 1376.214288] sd 9:0:0:0: rpm_resume returns 1
[ 1376.480136] sd 9:0:0:0: rpm_resume flags 0x4
[ 1376.480146] sd 9:0:0:0: rpm_resume returns 1
[ 1376.541638] sd 9:0:0:0: rpm_resume flags 0x4
[ 1376.541651] sd 9:0:0:0: rpm_resume returns 1
[ 1378.424051] sd 8:0:0:0: rpm_resume flags 0x4
[ 1378.424057] sd 8:0:0:0: rpm_resume returns 1
[ 1386.390044] sd 9:0:0:0: rpm_resume flags 0x4
[ 1386.390054] sd 9:0:0:0: rpm_resume returns 1
[ 1386.646615] sd 9:0:0:0: rpm_resume flags 0x4
[ 1386.646625] sd 9:0:0:0: rpm_resume returns 1
[ 1393.419914] sd 9:0:0:0: rpm_resume flags 0x4
[ 1393.419919] sd 9:0:0:0: rpm_resume returns 1
[ 1393.425800] sd 9:0:0:0: rpm_resume flags 0x4
[ 1393.425810] sd 9:0:0:0: rpm_resume returns 1
[ 1395.401383] sd 9:0:0:0: rpm_resume flags 0x4
[ 1395.401393] sd 9:0:0:0: rpm_resume returns 1
[ 1395.417517] sd 8:0:0:0: rpm_resume flags 0x4
[ 1395.417526] sd 8:0:0:0: rpm_resume returns 1
[ 1395.453914] sd 9:0:0:0: rpm_resume flags 0x4
[ 1395.453923] sd 9:0:0:0: rpm_resume returns 1
[ 1410.397791] sd 9:0:0:0: rpm_resume flags 0x4
[ 1410.397797] sd 9:0:0:0: rpm_resume returns 1
[ 1412.396280] sd 8:0:0:0: rpm_resume flags 0x4
[ 1412.396285] sd 8:0:0:0: rpm_resume returns 1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: brcm80211: ieee80211_register_hw failed, status -22
2011-03-04 12:59 brcm80211: ieee80211_register_hw failed, status -22 Sheldon Neuberger
@ 2011-03-05 15:30 ` Arend van Spriel
0 siblings, 0 replies; 2+ messages in thread
From: Arend van Spriel @ 2011-03-05 15:30 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org, Sheldon Neuberger
On Fri, 04 Mar 2011 13:59:34 +0100, Sheldon Neuberger
<neuberger@gmail.com> wrote:
> I'm using compat-wireless-2011-03-03 and when the brcm80211 module
> loads at boot up, I'm getting an an error. See dmesg below.
>
I had a look at the tarball. The warning originates from following WARN_ON
call.
if (!have_band) {
WARN_ON(1);
return -EINVAL;
}
This would mean that the brcm80211 does not provide band information for
2.4GHz nor 5GHz bands. For the bcm4313 which is what you seem to have the
2.4 GHz band info should be provided. From the trace and log I see no
reason why brcm80211 would not fill this info.
Gr. AvS
--
"The most merciful thing in the world, I think, is the inability of the
human
mind to correlate all its contents." - "The Call of Cthulhu"
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-03-05 15:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-04 12:59 brcm80211: ieee80211_register_hw failed, status -22 Sheldon Neuberger
2011-03-05 15:30 ` Arend van Spriel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox