Linux IEEE 802.15.4 and 6LoWPAN development
 help / color / mirror / Atom feed
From: Stefan Schmidt <stefan@osg.samsung.com>
To: Alexander Aring <aar@pengutronix.de>, linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de, marcel@holtmann.org,
	jukka.rissanen@linux.intel.com, hannes@stressinduktion.org,
	mcr@sandelman.ca, werner@almesberger.net,
	linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org,
	"David S . Miller" <davem@davemloft.net>,
	Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>,
	James Morris <jmorris@namei.org>,
	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
	Patrick McHardy <kaber@trash.net>
Subject: Re: [PATCHv2 bluetooth-next 08/10] ipv6: export ndisc functions
Date: Wed, 4 May 2016 14:23:22 +0200	[thread overview]
Message-ID: <5729E9BA.50504@osg.samsung.com> (raw)
In-Reply-To: <1461140382-4784-9-git-send-email-aar@pengutronix.de>

Hello.

On 20/04/16 10:19, Alexander Aring wrote:
> This patch exports some neighbour discovery functions which can be used
> by 6lowpan neighbour discovery ops functionality then.
>
> Cc: David S. Miller<davem@davemloft.net>
> Cc: Alexey Kuznetsov<kuznet@ms2.inr.ac.ru>
> Cc: James Morris<jmorris@namei.org>
> Cc: Hideaki YOSHIFUJI<yoshfuji@linux-ipv6.org>
> Cc: Patrick McHardy<kaber@trash.net>
> Signed-off-by: Alexander Aring<aar@pengutronix.de>
> ---
>   include/net/ndisc.h | 16 ++++++++++++++++
>   net/ipv6/addrconf.c |  1 +
>   net/ipv6/ndisc.c    | 28 ++++++++++------------------
>   3 files changed, 27 insertions(+), 18 deletions(-)
>
> diff --git a/include/net/ndisc.h b/include/net/ndisc.h
> index 14ed016..35a4396 100644
> --- a/include/net/ndisc.h
> +++ b/include/net/ndisc.h
> @@ -53,6 +53,15 @@ enum {
>   
>   #include <net/neighbour.h>
>   
> +/* Set to 3 to get tracing... */
> +#define ND_DEBUG 1
> +
> +#define ND_PRINTK(val, level, fmt, ...)				\
> +do {								\
> +	if (val <= ND_DEBUG)					\
> +		net_##level##_ratelimited(fmt, ##__VA_ARGS__);	\
> +} while (0)
> +
>   struct ctl_table;
>   struct inet6_dev;
>   struct net_device;
> @@ -267,6 +276,13 @@ int ndisc_late_init(void);
>   void ndisc_late_cleanup(void);
>   void ndisc_cleanup(void);
>   
> +void ndisc_fill_addr_option(struct sk_buff *skb, int type, void *data,
> +			    int data_len);
> +struct sk_buff *ndisc_alloc_skb(struct net_device *dev, int len);
> +void ndisc_send_skb(struct sk_buff *skb, const struct in6_addr *daddr,
> +		    const struct in6_addr *saddr);
> +int pndisc_is_router(const void *pkey, struct net_device *dev);
> +
>   int ndisc_rcv(struct sk_buff *skb);
>   
>   void ndisc_send_rs(struct net_device *dev,
> diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
> index a2ef04b..8f05ef8 100644
> --- a/net/ipv6/addrconf.c
> +++ b/net/ipv6/addrconf.c
> @@ -1775,6 +1775,7 @@ struct inet6_ifaddr *ipv6_get_ifaddr(struct net *net, const struct in6_addr *add
>   
>   	return result;
>   }
> +EXPORT_SYMBOL(ipv6_get_ifaddr);
>   
>   /* Gets referenced address, destroys ifaddr */
>   
> diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
> index 297080a..dc8bfec 100644
> --- a/net/ipv6/ndisc.c
> +++ b/net/ipv6/ndisc.c
> @@ -73,15 +73,6 @@
>   #include <linux/netfilter.h>
>   #include <linux/netfilter_ipv6.h>
>   
> -/* Set to 3 to get tracing... */
> -#define ND_DEBUG 1
> -
> -#define ND_PRINTK(val, level, fmt, ...)				\
> -do {								\
> -	if (val <= ND_DEBUG)					\
> -		net_##level##_ratelimited(fmt, ##__VA_ARGS__);	\
> -} while (0)
> -
>   static u32 ndisc_hash(const void *pkey,
>   		      const struct net_device *dev,
>   		      __u32 *hash_rnd);
> @@ -150,8 +141,8 @@ struct neigh_table nd_tbl = {
>   };
>   EXPORT_SYMBOL_GPL(nd_tbl);
>   
> -static void ndisc_fill_addr_option(struct sk_buff *skb, int type, void *data,
> -				   int data_len)
> +void ndisc_fill_addr_option(struct sk_buff *skb, int type, void *data,
> +			    int data_len)
>   {
>   	int pad   = ndisc_addr_option_pad(skb->dev->type);
>   	int space = ndisc_opt_addr_space(skb->dev, data_len);
> @@ -171,6 +162,7 @@ static void ndisc_fill_addr_option(struct sk_buff *skb, int type, void *data,
>   	if (space > 0)
>   		memset(opt, 0, space);
>   }
> +EXPORT_SYMBOL(ndisc_fill_addr_option);

Hmm, one export in this files uses EXPORT_SYMBOL while another one uses  
EXPORT_SYMBOL_GPL. Not sure which one is preferred in this file.
>   
>   static struct nd_opt_hdr *ndisc_next_option(struct nd_opt_hdr *cur,
>   					    struct nd_opt_hdr *end)
> @@ -378,8 +370,7 @@ static void pndisc_destructor(struct pneigh_entry *n)
>   	ipv6_dev_mc_dec(dev, &maddr);
>   }
>   
> -static struct sk_buff *ndisc_alloc_skb(struct net_device *dev,
> -				       int len)
> +struct sk_buff *ndisc_alloc_skb(struct net_device *dev, int len)
>   {
>   	int hlen = LL_RESERVED_SPACE(dev);
>   	int tlen = dev->needed_tailroom;
> @@ -406,6 +397,7 @@ static struct sk_buff *ndisc_alloc_skb(struct net_device *dev,
>   
>   	return skb;
>   }
> +EXPORT_SYMBOL(ndisc_alloc_skb);

Same here.
>   
>   static void ip6_nd_hdr(struct sk_buff *skb,
>   		       const struct in6_addr *saddr,
> @@ -428,9 +420,8 @@ static void ip6_nd_hdr(struct sk_buff *skb,
>   	hdr->daddr = *daddr;
>   }
>   
> -static void ndisc_send_skb(struct sk_buff *skb,
> -			   const struct in6_addr *daddr,
> -			   const struct in6_addr *saddr)
> +void ndisc_send_skb(struct sk_buff *skb, const struct in6_addr *daddr,
> +		    const struct in6_addr *saddr)
>   {
>   	struct dst_entry *dst = skb_dst(skb);
>   	struct net *net = dev_net(skb->dev);
> @@ -479,6 +470,7 @@ static void ndisc_send_skb(struct sk_buff *skb,
>   
>   	rcu_read_unlock();
>   }
> +EXPORT_SYMBOL(ndisc_send_skb);

And here.
>   
>   static void ip6_ndisc_send_na(struct net_device *dev,
>   			      const struct in6_addr *daddr,
> @@ -692,8 +684,7 @@ static void ndisc_solicit(struct neighbour *neigh, struct sk_buff *skb)
>   	}
>   }
>   
> -static int pndisc_is_router(const void *pkey,
> -			    struct net_device *dev)
> +int pndisc_is_router(const void *pkey, struct net_device *dev)
>   {
>   	struct pneigh_entry *n;
>   	int ret = -1;
> @@ -706,6 +697,7 @@ static int pndisc_is_router(const void *pkey,
>   
>   	return ret;
>   }
> +EXPORT_SYMBOL(pndisc_is_router);
>   
>   static void ip6_ndisc_recv_ns(struct sk_buff *skb)
>   {

Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com>

regards
Stefan Schmidt

  parent reply	other threads:[~2016-05-04 12:23 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-20  8:19 [PATCHv2 bluetooth-next 00/10] 6lowpan: introduce basic 6lowpan-nd Alexander Aring
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 01/10] 6lowpan: add private neighbour data Alexander Aring
2016-05-02 18:59   ` Hannes Frederic Sowa
2016-05-04 10:43     ` Alexander Aring
2016-05-03 18:16   ` Stefan Schmidt
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 02/10] 6lowpan: add 802.15.4 short addr slaac Alexander Aring
2016-05-02 19:06   ` Hannes Frederic Sowa
2016-05-03 18:16   ` Stefan Schmidt
2016-05-06  9:26     ` Alexander Aring
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 03/10] 6lowpan: remove ipv6 module request Alexander Aring
2016-05-02 19:06   ` Hannes Frederic Sowa
2016-05-03 18:16   ` Stefan Schmidt
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 04/10] ndisc: add addr_len parameter to ndisc_opt_addr_space Alexander Aring
2016-05-02 19:37   ` Hannes Frederic Sowa
2016-05-04 12:30     ` Alexander Aring
2016-05-06 22:23       ` Hannes Frederic Sowa
2016-05-08 10:39         ` Alexander Aring
2016-05-03 18:17   ` Stefan Schmidt
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 05/10] ndisc: add addr_len parameter to ndisc_opt_addr_data Alexander Aring
2016-05-03 18:17   ` Stefan Schmidt
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 06/10] ndisc: add addr_len parameter to ndisc_fill_addr_option Alexander Aring
2016-05-03 18:17   ` Stefan Schmidt
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 07/10] ipv6: introduce neighbour discovery ops Alexander Aring
2016-05-02 19:36   ` Hannes Frederic Sowa
2016-05-03 18:17     ` Stefan Schmidt
2016-05-06  9:36       ` Alexander Aring
2016-05-04 12:23   ` Stefan Schmidt
2016-05-06  9:47     ` Alexander Aring
2016-05-06 10:19       ` Alexander Aring
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 08/10] ipv6: export ndisc functions Alexander Aring
2016-05-02 19:39   ` Hannes Frederic Sowa
2016-05-08 10:46     ` Alexander Aring
2016-05-04 12:23   ` Stefan Schmidt [this message]
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 09/10] 6lowpan: introduce 6lowpan-nd Alexander Aring
2016-05-04 12:23   ` Stefan Schmidt
2016-04-20  8:19 ` [PATCHv2 bluetooth-next 10/10] 6lowpan: add support for 802.15.4 short addr handling Alexander Aring
2016-05-04 12:23   ` Stefan Schmidt
2016-04-28 11:36 ` [PATCHv2 bluetooth-next 00/10] 6lowpan: introduce basic 6lowpan-nd Alexander Aring
2016-05-02 17:25 ` Marcel Holtmann
2016-05-02 19:52   ` Hannes Frederic Sowa
2016-05-02 23:17     ` Marcel Holtmann
2016-05-03 20:07       ` David Miller
2016-05-13  2:59   ` YOSHIFUJI Hideaki
2016-05-13 12:33     ` Alexander Aring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5729E9BA.50504@osg.samsung.com \
    --to=stefan@osg.samsung.com \
    --cc=aar@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=hannes@stressinduktion.org \
    --cc=jmorris@namei.org \
    --cc=jukka.rissanen@linux.intel.com \
    --cc=kaber@trash.net \
    --cc=kernel@pengutronix.de \
    --cc=kuznet@ms2.inr.ac.ru \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-wpan@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mcr@sandelman.ca \
    --cc=netdev@vger.kernel.org \
    --cc=werner@almesberger.net \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox