Linux XFS filesystem development
 help / color / mirror / Atom feed
From: Dave Chinner <dgc@kernel.org>
To: linux-xfs@vger.kernel.org
Cc: cem@kernel.org
Subject: [PATCH 14/59] xfs: track transaction header decode state explicitly
Date: Tue, 17 Nov 2026 10:14:31 +1100	[thread overview]
Message-ID: <20261116231707.3625263-15-dgc@kernel.org> (raw)
In-Reply-To: <20261116231707.3625263-1-dgc@kernel.org>

Recovery decides whether an incoming op record is part of the transaction
header by checking whether the transaction item queue is empty. That is an
indirect signal. It only works because no item is added until the header is
complete.

Add an explicit flag to the recovery transaction. It is set once the header
has been fully assembled, at the same point the first item is added. Use it to
route op records instead of the item queue state. There is no functional
change.

Assisted-by: LLM
Signed-off-by: Dave Chinner <dgc@kernel.org>
---
 fs/xfs/libxfs/xfs_log_recover.h |  1 +
 fs/xfs/xfs_log_recover.c        | 24 ++++++++++++++----------
 2 files changed, 15 insertions(+), 10 deletions(-)

diff --git a/fs/xfs/libxfs/xfs_log_recover.h b/fs/xfs/libxfs/xfs_log_recover.h
index 9e712e62369c..ad73a1a6abf8 100644
--- a/fs/xfs/libxfs/xfs_log_recover.h
+++ b/fs/xfs/libxfs/xfs_log_recover.h
@@ -115,6 +115,7 @@ struct xlog_recover {
 	int			r_state;	/* not needed */
 	xfs_lsn_t		r_lsn;		/* xact lsn */
 	struct list_head	r_itemq;	/* q for items */
+	bool			r_hdr_decoded;	/* trans header fully decoded */
 };
 
 #define ITEM_TYPE(i)	(*(unsigned short *)(i)->ri_buf[0].iov_base)
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 494bf5ebfa7b..c50f85757216 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -2155,15 +2155,19 @@ xlog_recover_init_new_trans(
 				sizeof(struct xfs_trans_header) - len;
 	}
 
+	memcpy(ptr, dp, len);
+
 	/*
-	 * Add an item to the transaction once the header is complete: for an
-	 * unsplit header that is this initial fragment (len == full header),
+	 * The header is complete once the full struct has been assembled: for
+	 * an unsplit header that is this initial fragment (len == full header),
 	 * and for a split header it is the continuation fragment that finishes
-	 * it.
+	 * it. Mark it decoded and add the item that subsequent log item regions
+	 * will be decoded into.
 	 */
-	if (cont || len == sizeof(struct xfs_trans_header))
+	if (cont || len == sizeof(struct xfs_trans_header)) {
+		trans->r_hdr_decoded = true;
 		xlog_recover_add_item(&trans->r_itemq);
-	memcpy(ptr, dp, len);
+	}
 	return 0;
 }
 
@@ -2319,14 +2323,14 @@ xlog_recovery_process_trans(
 		flags &= ~XLOG_CONTINUE_TRANS;
 
 	/*
-	 * An empty item queue means we are still decoding the transaction
-	 * header at the start of the transaction rather than a log item. The
-	 * header can arrive whole (flags == 0), as an initial fragment
-	 * (XLOG_CONTINUE_TRANS) or as a continuation fragment
+	 * Until the transaction header has been fully decoded we are still
+	 * assembling it at the start of the transaction rather than decoding a
+	 * log item. The header can arrive whole (flags == 0), as an initial
+	 * fragment (XLOG_CONTINUE_TRANS) or as a continuation fragment
 	 * (XLOG_WAS_CONT_TRANS); XLOG_WAS_CONT_TRANS distinguishes the
 	 * continuation.
 	 */
-	if (list_empty(&trans->r_itemq) &&
+	if (!trans->r_hdr_decoded &&
 	    (!flags || (flags & (XLOG_CONTINUE_TRANS | XLOG_WAS_CONT_TRANS)))) {
 		error = xlog_recover_init_new_trans(log, trans, dp, len,
 					flags & XLOG_WAS_CONT_TRANS);
-- 
2.55.0


  parent reply	other threads:[~2026-11-16 23:17 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-16 23:14 [V2 PATCH 00/59] Validate journal log items during log recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 01/59] xfs: set the unmount record operation header length Dave Chinner
2026-11-16 23:14 ` [PATCH 02/59] xfs: fix the rt rmap btree maximum level checks Dave Chinner
2026-11-16 23:14 ` [PATCH 03/59] xfs: allow an empty rt refcount btree root before the rt volume exists Dave Chinner
2026-11-16 23:14 ` [PATCH 04/59] xfs: recompute the rt btree maxlevels when growfs changes them Dave Chinner
2026-11-16 23:14 ` [PATCH 05/59] xfs: recompute the transaction reservations after growfs Dave Chinner
2026-11-16 23:14 ` [PATCH 06/59] xfs: skip missing groups when freeing them Dave Chinner
2026-11-16 23:14 ` [PATCH 07/59] xfs: update the rt geometry when recovering a superblock change Dave Chinner
2026-11-16 23:14 ` [PATCH 08/59] xfs: reinitialise the filesystem geometry after log recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 09/59] xfs: apply mount superblock updates " Dave Chinner
2026-11-16 23:14 ` [PATCH 10/59] xfs: check the atomic write reservation against the current log size Dave Chinner
2026-11-16 23:14 ` [PATCH 11/59] xfs: fix the bmap btree maximum height calculation Dave Chinner
2026-11-16 23:14 ` [PATCH 12/59] xfs: add log recovery item validation design document Dave Chinner
2026-11-16 23:14 ` [PATCH 13/59] xfs: lift transaction header parsing out of the region assembly Dave Chinner
2026-11-16 23:14 ` Dave Chinner [this message]
2026-11-16 23:14 ` [PATCH 15/59] xfs: track the log item being rebuilt with an explicit pointer Dave Chinner
2026-11-16 23:14 ` [PATCH 16/59] xfs: complete log items explicitly during recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 17/59] xfs: add log item validation infrastructure to log recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 18/59] xfs: recover the transaction header as a validated item type Dave Chinner
2026-11-16 23:14 ` [PATCH 19/59] xfs: factor out xlog_recover_validate_ophdr() Dave Chinner
2026-11-16 23:14 ` [PATCH 20/59] xfs: validate operation header length and alignment during recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 21/59] xfs: validate the operation header padding " Dave Chinner
2026-11-16 23:14 ` [PATCH 22/59] xfs: validate the operation header flags " Dave Chinner
2026-11-16 23:14 ` [PATCH 23/59] xfs: enforce zero length control records " Dave Chinner
2026-11-16 23:14 ` [PATCH 24/59] xfs: validate the unmount record " Dave Chinner
2026-11-16 23:14 ` [PATCH 25/59] xfs: handle zero length continuation op headers " Dave Chinner
2026-11-16 23:14 ` [PATCH 26/59] xfs: bound the assembled region size " Dave Chinner
2026-11-16 23:14 ` [PATCH 27/59] xfs: dump the corrupt region when log item validation fails Dave Chinner
2026-11-16 23:14 ` [PATCH 28/59] xfs: validate inode create and quota off log items during recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 29/59] xfs: validate extent free " Dave Chinner
2026-11-16 23:14 ` [PATCH 30/59] xfs: validate and convert extent free intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 31/59] xfs: validate and convert extent free done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 32/59] xfs: validate rmap update intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 33/59] xfs: validate rmap update done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 34/59] xfs: validate refcount update intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 35/59] xfs: validate refcount update done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 36/59] xfs: validate bmap update intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 37/59] xfs: validate bmap update done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 38/59] xfs: validate mapping exchange intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 39/59] xfs: validate mapping exchange done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 40/59] xfs: validate dquot " Dave Chinner
2026-11-16 23:14 ` [PATCH 41/59] xfs: validate attr done " Dave Chinner
2026-11-16 23:14 ` [PATCH 42/59] xfs: validate attr intents " Dave Chinner
2026-11-16 23:15 ` [PATCH 43/59] xfs: convert inode items to host format " Dave Chinner
2026-11-16 23:15 ` [PATCH 44/59] xfs: allow xfs_imap() to map without an inode btree lookup Dave Chinner
2026-11-16 23:15 ` [PATCH 45/59] xfs: validate the inode item format header during recovery Dave Chinner
2026-11-16 23:15 ` [PATCH 46/59] xfs: validate the logged inode core " Dave Chinner
2026-11-16 23:15 ` [PATCH 47/59] xfs: validate the logged inode forks " Dave Chinner
2026-11-16 23:15 ` [PATCH 48/59] xfs: validate logged local fork contents " Dave Chinner
2026-11-16 23:15 ` [PATCH 49/59] xfs: validate logged extent " Dave Chinner
2026-11-16 23:15 ` [PATCH 50/59] xfs: allow a long format btree root to be checked without a cursor Dave Chinner
2026-11-16 23:15 ` [PATCH 51/59] xfs: validate logged btree fork roots during recovery Dave Chinner
2026-11-16 23:15 ` [PATCH 52/59] xfs: validate logged metadata " Dave Chinner
2026-11-16 23:15 ` [PATCH 53/59] xfs: check logged btree fork roots fit in the inode fork " Dave Chinner
2026-11-16 23:15 ` [PATCH 54/59] xfs: validate buffer item region count " Dave Chinner
2026-11-16 23:15 ` [PATCH 55/59] xfs: validate buffer item regions " Dave Chinner
2026-11-16 23:15 ` [PATCH 56/59] xfs: validate the whole buffer item " Dave Chinner
2026-11-16 23:15 ` [PATCH 57/59] xfs: remove redundant buffer checks from recovery replay Dave Chinner
2026-11-16 23:15 ` [PATCH 58/59] xfs: fail recovery on a buffer type mismatch Dave Chinner
2026-11-16 23:15 ` [PATCH 59/59] xfs: validate logged dquot buffers during recovery Dave Chinner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261116231707.3625263-15-dgc@kernel.org \
    --to=dgc@kernel.org \
    --cc=cem@kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox