From: Dave Chinner <dgc@kernel.org>
To: linux-xfs@vger.kernel.org
Cc: cem@kernel.org
Subject: [PATCH 03/59] xfs: allow an empty rt refcount btree root before the rt volume exists
Date: Tue, 17 Nov 2026 10:14:20 +1100 [thread overview]
Message-ID: <20261116231707.3625263-4-dgc@kernel.org> (raw)
In-Reply-To: <20261116231707.3625263-1-dgc@kernel.org>
There is a transient state on disk where an rtrefcount inode has no contents,
because growfs can create rtrefcount inodes dynamically. m_rtrefc_maxlevels is
zero until growfs adds the first realtime volume. Growfs loads an existing
rtrefcount inode before it adds the space and recomputes m_rtrefc_maxlevels. An
inode left behind by an earlier growfs that failed after creating it is loaded
while m_rtrefc_maxlevels is still zero.
Commit cc3144da377d changed the root loader to reject levels at or above
m_rtrefc_maxlevels. That rejects every level when m_rtrefc_maxlevels is zero,
including the empty level zero root. A retried growfs then fails on a valid
inode.
Accept an empty level zero root when m_rtrefc_maxlevels is zero. A non-empty
level zero root is a normal leaf root that is still checked to fit within the
inode fork.
The inode repair code rejects only levels greater than m_rtrefc_maxlevels, so it
disagrees with the root loader. Give it the same root level rules.
Fixes: cc3144da377d ("xfs: fix off-by-one in rtrefcount btree root level validation")
Fixes: 92b2019493d1 ("xfs: repair inodes that have a refcount btree in the data fork")
Cc: stable@vger.kernel.org # v6.14
Assisted-by: LLM
Signed-off-by: Dave Chinner <dgc@kernel.org>
---
fs/xfs/libxfs/xfs_rtrefcount_btree.c | 27 +++++++++++++++++++++++----
fs/xfs/scrub/inode_repair.c | 7 ++++++-
2 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/fs/xfs/libxfs/xfs_rtrefcount_btree.c b/fs/xfs/libxfs/xfs_rtrefcount_btree.c
index 697f5e622685..b91b2f1895ce 100644
--- a/fs/xfs/libxfs/xfs_rtrefcount_btree.c
+++ b/fs/xfs/libxfs/xfs_rtrefcount_btree.c
@@ -559,17 +559,36 @@ xfs_iformat_rtrefcount(
numrecs = be16_to_cpu(dfp->bb_numrecs);
level = be16_to_cpu(dfp->bb_level);
- if (level >= mp->m_rtrefc_maxlevels ||
- xfs_rtrefcount_droot_space_calc(level, numrecs) > dsize) {
- xfs_inode_mark_sick(ip, XFS_SICK_INO_CORE);
- return -EFSCORRUPTED;
+ if (level == 0) {
+ /*
+ * rtrefcount inodes can be dynamically created by growfs,
+ * resulting in a transient state on disk where they can have no
+ * contents. Hence a rtrefcount inode with an empty level zero
+ * root is a valid state. Until growfs adds the first realtime
+ * volume there is nothing to count, so the root must be empty.
+ */
+ if (mp->m_rtrefc_maxlevels == 0 && numrecs != 0)
+ goto out_corrupt;
+ } else if (level >= mp->m_rtrefc_maxlevels) {
+ /*
+ * m_rtrefc_maxlevels includes the inode root level, so the
+ * deepest valid root level is one less than that.
+ */
+ goto out_corrupt;
}
+ if (xfs_rtrefcount_droot_space_calc(level, numrecs) > dsize)
+ goto out_corrupt;
+
broot = xfs_broot_alloc(xfs_ifork_ptr(ip, XFS_DATA_FORK),
xfs_rtrefcount_broot_space_calc(level, numrecs));
if (broot)
xfs_rtrefcountbt_from_disk(ip, dfp, dsize, broot);
return 0;
+
+out_corrupt:
+ xfs_inode_mark_sick(ip, XFS_SICK_INO_CORE);
+ return -EFSCORRUPTED;
}
/*
diff --git a/fs/xfs/scrub/inode_repair.c b/fs/xfs/scrub/inode_repair.c
index 4486881329b9..05bb4be29390 100644
--- a/fs/xfs/scrub/inode_repair.c
+++ b/fs/xfs/scrub/inode_repair.c
@@ -1002,8 +1002,13 @@ xrep_dinode_bad_rtrefcountbt_fork(
nrecs = be16_to_cpu(dfp->bb_numrecs);
level = be16_to_cpu(dfp->bb_level);
- if (level > sc->mp->m_rtrefc_maxlevels)
+ /* Same root level rules as xfs_iformat_rtrefcount(). */
+ if (level == 0) {
+ if (sc->mp->m_rtrefc_maxlevels == 0 && nrecs != 0)
+ return true;
+ } else if (level >= sc->mp->m_rtrefc_maxlevels) {
return true;
+ }
if (xfs_rtrefcount_droot_space_calc(level, nrecs) > dfork_size)
return true;
if (level > 0 && nrecs == 0)
--
2.55.0
next prev parent reply other threads:[~2026-11-16 23:17 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 23:14 [V2 PATCH 00/59] Validate journal log items during log recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 01/59] xfs: set the unmount record operation header length Dave Chinner
2026-11-16 23:14 ` [PATCH 02/59] xfs: fix the rt rmap btree maximum level checks Dave Chinner
2026-11-16 23:14 ` Dave Chinner [this message]
2026-11-16 23:14 ` [PATCH 04/59] xfs: recompute the rt btree maxlevels when growfs changes them Dave Chinner
2026-11-16 23:14 ` [PATCH 05/59] xfs: recompute the transaction reservations after growfs Dave Chinner
2026-11-16 23:14 ` [PATCH 06/59] xfs: skip missing groups when freeing them Dave Chinner
2026-11-16 23:14 ` [PATCH 07/59] xfs: update the rt geometry when recovering a superblock change Dave Chinner
2026-11-16 23:14 ` [PATCH 08/59] xfs: reinitialise the filesystem geometry after log recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 09/59] xfs: apply mount superblock updates " Dave Chinner
2026-11-16 23:14 ` [PATCH 10/59] xfs: check the atomic write reservation against the current log size Dave Chinner
2026-11-16 23:14 ` [PATCH 11/59] xfs: fix the bmap btree maximum height calculation Dave Chinner
2026-11-16 23:14 ` [PATCH 12/59] xfs: add log recovery item validation design document Dave Chinner
2026-11-16 23:14 ` [PATCH 13/59] xfs: lift transaction header parsing out of the region assembly Dave Chinner
2026-11-16 23:14 ` [PATCH 14/59] xfs: track transaction header decode state explicitly Dave Chinner
2026-11-16 23:14 ` [PATCH 15/59] xfs: track the log item being rebuilt with an explicit pointer Dave Chinner
2026-11-16 23:14 ` [PATCH 16/59] xfs: complete log items explicitly during recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 17/59] xfs: add log item validation infrastructure to log recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 18/59] xfs: recover the transaction header as a validated item type Dave Chinner
2026-11-16 23:14 ` [PATCH 19/59] xfs: factor out xlog_recover_validate_ophdr() Dave Chinner
2026-11-16 23:14 ` [PATCH 20/59] xfs: validate operation header length and alignment during recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 21/59] xfs: validate the operation header padding " Dave Chinner
2026-11-16 23:14 ` [PATCH 22/59] xfs: validate the operation header flags " Dave Chinner
2026-11-16 23:14 ` [PATCH 23/59] xfs: enforce zero length control records " Dave Chinner
2026-11-16 23:14 ` [PATCH 24/59] xfs: validate the unmount record " Dave Chinner
2026-11-16 23:14 ` [PATCH 25/59] xfs: handle zero length continuation op headers " Dave Chinner
2026-11-16 23:14 ` [PATCH 26/59] xfs: bound the assembled region size " Dave Chinner
2026-11-16 23:14 ` [PATCH 27/59] xfs: dump the corrupt region when log item validation fails Dave Chinner
2026-11-16 23:14 ` [PATCH 28/59] xfs: validate inode create and quota off log items during recovery Dave Chinner
2026-11-16 23:14 ` [PATCH 29/59] xfs: validate extent free " Dave Chinner
2026-11-16 23:14 ` [PATCH 30/59] xfs: validate and convert extent free intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 31/59] xfs: validate and convert extent free done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 32/59] xfs: validate rmap update intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 33/59] xfs: validate rmap update done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 34/59] xfs: validate refcount update intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 35/59] xfs: validate refcount update done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 36/59] xfs: validate bmap update intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 37/59] xfs: validate bmap update done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 38/59] xfs: validate mapping exchange intents " Dave Chinner
2026-11-16 23:14 ` [PATCH 39/59] xfs: validate mapping exchange done items " Dave Chinner
2026-11-16 23:14 ` [PATCH 40/59] xfs: validate dquot " Dave Chinner
2026-11-16 23:14 ` [PATCH 41/59] xfs: validate attr done " Dave Chinner
2026-11-16 23:14 ` [PATCH 42/59] xfs: validate attr intents " Dave Chinner
2026-11-16 23:15 ` [PATCH 43/59] xfs: convert inode items to host format " Dave Chinner
2026-11-16 23:15 ` [PATCH 44/59] xfs: allow xfs_imap() to map without an inode btree lookup Dave Chinner
2026-11-16 23:15 ` [PATCH 45/59] xfs: validate the inode item format header during recovery Dave Chinner
2026-11-16 23:15 ` [PATCH 46/59] xfs: validate the logged inode core " Dave Chinner
2026-11-16 23:15 ` [PATCH 47/59] xfs: validate the logged inode forks " Dave Chinner
2026-11-16 23:15 ` [PATCH 48/59] xfs: validate logged local fork contents " Dave Chinner
2026-11-16 23:15 ` [PATCH 49/59] xfs: validate logged extent " Dave Chinner
2026-11-16 23:15 ` [PATCH 50/59] xfs: allow a long format btree root to be checked without a cursor Dave Chinner
2026-11-16 23:15 ` [PATCH 51/59] xfs: validate logged btree fork roots during recovery Dave Chinner
2026-11-16 23:15 ` [PATCH 52/59] xfs: validate logged metadata " Dave Chinner
2026-11-16 23:15 ` [PATCH 53/59] xfs: check logged btree fork roots fit in the inode fork " Dave Chinner
2026-11-16 23:15 ` [PATCH 54/59] xfs: validate buffer item region count " Dave Chinner
2026-11-16 23:15 ` [PATCH 55/59] xfs: validate buffer item regions " Dave Chinner
2026-11-16 23:15 ` [PATCH 56/59] xfs: validate the whole buffer item " Dave Chinner
2026-11-16 23:15 ` [PATCH 57/59] xfs: remove redundant buffer checks from recovery replay Dave Chinner
2026-11-16 23:15 ` [PATCH 58/59] xfs: fail recovery on a buffer type mismatch Dave Chinner
2026-11-16 23:15 ` [PATCH 59/59] xfs: validate logged dquot buffers during recovery Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116231707.3625263-4-dgc@kernel.org \
--to=dgc@kernel.org \
--cc=cem@kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox