* real time clock seems stuck!
@ 2002-06-11 9:22 zhongqx
0 siblings, 0 replies; 2+ messages in thread
From: zhongqx @ 2002-06-11 9:22 UTC (permalink / raw)
To: linuxppc-embedded
Sir,
I use SMC2 for Console,this time message come from SMC2,but it has warning message like following:
warning: Real time clock seems stuck, then it is dead!
it seems calibrate_delay() function can not go forward(perhaps), Do you know why? Should I add CONFIG_RTC?
it looks like jiffies can not be updated. Do you have some good idea for this.do not forget send your
.config for me.thank you again.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: real time clock seems stuck!
@ 2002-06-12 6:56 Mészáros Lajos
0 siblings, 0 replies; 2+ messages in thread
From: Mészáros Lajos @ 2002-06-12 6:56 UTC (permalink / raw)
To: linuxppc-embedded
zhongqx wrote:
> I use SMC2 for Console,this time message come from SMC2,but it has
warning message
> like following:
> warning: Real time clock seems stuck, then it is dead!
> it seems calibrate_delay() function can not go forward(perhaps), Do you
know why?
> Should I add CONFIG_RTC?
IF it comes from PpcBoot AND your kernel is after 2.4.5
THEN unconfig CONFIG_CLOCKS_IN_MHZ in PpcBoot. (the kernel requires Hz but
get MHz)
The "Real time clock seems stuck" warning remains, but calibrate_delay()
goes on.
Ludwig
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-06-12 6:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-06-11 9:22 real time clock seems stuck! zhongqx
-- strict thread matches above, loose matches on Subject: below --
2002-06-12 6:56 Mészáros Lajos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox