Status of fsl booke TLB and ATMU patches

Status of fsl booke TLB and ATMU patches

[Trent Piepho]

2.6.28 is out, can my existing patches be accepted?

[2/2] POWERPC/fsl-pci: Set relaxed ordering on prefetchable ranges
http://patchwork.ozlabs.org/patch/14546/

[1/2] POWERPC/fsl-pci: Better ATMU setup
http://patchwork.ozlabs.org/patch/14544/

[5/5] powerpc: booke: Allow larger CAM sizes than 256 MB
http://patchwork.ozlabs.org/patch/12885/

[4/5] powerpc: booke: Make CAM entries used for lowmem configurable
http://patchwork.ozlabs.org/patch/12884/

[3/5] powerpc: booke: Remove code duplication in lowmem mapping
http://patchwork.ozlabs.org/patch/12883/

[2/5] powerpc: booke: Remove num_tlbcam_entries
http://patchwork.ozlabs.org/patch/12882/

[1/5] powerpc: booke: Don't hard-code size of struct tlbcam
http://patchwork.ozlabs.org/patch/12881/

Re: Status of fsl booke TLB and ATMU patches

[Benjamin Herrenschmidt]

On Fri, 2009-01-02 at 16:18 -0800, Trent Piepho wrote:
> 2.6.28 is out, can my existing patches be accepted?

It's all FSL stuff and thus in Kumar's hands. I think there's a pending
pull request from him tho, thus maybe they are in there already :-)

I've just officially taken over so I'll scrub patchwork and outstanding
sub maintainer pull requests if any early next week.

Cheers,
Ben.

> [2/2] POWERPC/fsl-pci: Set relaxed ordering on prefetchable ranges
> http://patchwork.ozlabs.org/patch/14546/
> 
> [1/2] POWERPC/fsl-pci: Better ATMU setup
> http://patchwork.ozlabs.org/patch/14544/
> 
> [5/5] powerpc: booke: Allow larger CAM sizes than 256 MB
> http://patchwork.ozlabs.org/patch/12885/
> 
> [4/5] powerpc: booke: Make CAM entries used for lowmem configurable
> http://patchwork.ozlabs.org/patch/12884/
> 
> [3/5] powerpc: booke: Remove code duplication in lowmem mapping
> http://patchwork.ozlabs.org/patch/12883/
> 
> [2/5] powerpc: booke: Remove num_tlbcam_entries
> http://patchwork.ozlabs.org/patch/12882/
> 
> [1/5] powerpc: booke: Don't hard-code size of struct tlbcam
> http://patchwork.ozlabs.org/patch/12881/
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev

Re: Status of fsl booke TLB and ATMU patches

[Kumar Gala]

On Jan 2, 2009, at 11:30 PM, Benjamin Herrenschmidt wrote:

> On Fri, 2009-01-02 at 16:18 -0800, Trent Piepho wrote:
>> 2.6.28 is out, can my existing patches be accepted?
>
> It's all FSL stuff and thus in Kumar's hands. I think there's a  
> pending
> pull request from him tho, thus maybe they are in there already :-)
>
> I've just officially taken over so I'll scrub patchwork and  
> outstanding
> sub maintainer pull requests if any early next week.
>
> Cheers,
> Ben.

Neither of these patch sets are in my pull request.  The PCI ones  
should be ok, but I need to review.

The TLB ones I'm still a bit concerned about their impact on the KVM  
fsl-booke port.

>> [2/2] POWERPC/fsl-pci: Set relaxed ordering on prefetchable ranges
>> http://patchwork.ozlabs.org/patch/14546/
>>
>> [1/2] POWERPC/fsl-pci: Better ATMU setup
>> http://patchwork.ozlabs.org/patch/14544/
>>
>> [5/5] powerpc: booke: Allow larger CAM sizes than 256 MB
>> http://patchwork.ozlabs.org/patch/12885/
>>
>> [4/5] powerpc: booke: Make CAM entries used for lowmem configurable
>> http://patchwork.ozlabs.org/patch/12884/
>>
>> [3/5] powerpc: booke: Remove code duplication in lowmem mapping
>> http://patchwork.ozlabs.org/patch/12883/
>>
>> [2/5] powerpc: booke: Remove num_tlbcam_entries
>> http://patchwork.ozlabs.org/patch/12882/
>>
>> [1/5] powerpc: booke: Don't hard-code size of struct tlbcam
>> http://patchwork.ozlabs.org/patch/12881/
>>

- k