* [PATCH v3 0/3] i2c-mpc: add support for the Freescale MPC512x and other fixes @ 2010-01-26 19:28 Wolfgang Grandegger 2010-01-26 19:28 ` [PATCH v3 1/3] i2c-mpc: use __init[data] for initialization functions and data Wolfgang Grandegger 0 siblings, 1 reply; 4+ messages in thread From: Wolfgang Grandegger @ 2010-01-26 19:28 UTC (permalink / raw) To: Linux-i2c; +Cc: Devicetree-discuss, Linuxppc-dev, Wolfgang Grandegger From: Wolfgang Grandegger <wg@denx.de> This patch series adds support for the MPC512x from Freescale to the i2c-mpc driver. At that occasion, issues with __devinit[data] have been fixed and the doc of the FSL I2C dts bindings updated. It has been tested on a MPC5121ADS, TQM5200 and TQM8560 board Changes since v1: - use macro MPC_I2C_CLOCK_PRESERVE/SAFE for the special clock settings. - document the special DTS node "fsl,mpc5121-i2c-ctrl". - update and correct the Kconfig help. - some other minor fixes as suggested by Wolfram. Changes since v2: - use __init[data] instead of __devinit[data] for this driver. Wolfgang Wolfgang Grandegger (3): i2c-mpc: use __init[data] for initialization functions and data i2c-mpc: add support for the MPC512x processors from Freescale powerpc: doc/dts-bindings: update doc of FSL I2C bindings Documentation/powerpc/dts-bindings/fsl/i2c.txt | 30 +++- drivers/i2c/busses/Kconfig | 7 +- drivers/i2c/busses/i2c-mpc.c | 197 +++++++++++++++--------- 3 files changed, 150 insertions(+), 84 deletions(-) ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v3 1/3] i2c-mpc: use __init[data] for initialization functions and data 2010-01-26 19:28 [PATCH v3 0/3] i2c-mpc: add support for the Freescale MPC512x and other fixes Wolfgang Grandegger @ 2010-01-26 19:28 ` Wolfgang Grandegger 2010-01-26 19:28 ` [PATCH v3 2/3] i2c-mpc: add support for the MPC512x processors from Freescale Wolfgang Grandegger 0 siblings, 1 reply; 4+ messages in thread From: Wolfgang Grandegger @ 2010-01-26 19:28 UTC (permalink / raw) To: Linux-i2c; +Cc: Devicetree-discuss, Linuxppc-dev, Wolfgang Grandegger From: Wolfgang Grandegger <wg@denx.de> "__devinit[data]" has been renamed to "__init[data]" as this is not a hotplugable device. Futhermore, all initialization functions and data are now marked properly. To avoid truncating lines, the struct "mpc_i2c_match_data" has been renamed to "mpc_i2c_data", which is even the better name. Signed-off-by: Wolfgang Grandegger <wg@denx.de> --- drivers/i2c/busses/i2c-mpc.c | 107 +++++++++++++++++++---------------------- 1 files changed, 50 insertions(+), 57 deletions(-) diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index f627001..222f6b8 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -66,7 +66,7 @@ struct mpc_i2c_divider { u16 fdr; /* including dfsrr */ }; -struct mpc_i2c_match_data { +struct mpc_i2c_data { void (*setclock)(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler); @@ -165,7 +165,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) } #ifdef CONFIG_PPC_MPC52xx -static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { +static const struct __initdata mpc_i2c_divider mpc_i2c_dividers_52xx[] = { {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28}, @@ -186,7 +186,8 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f} }; -int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler) +static int __init mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, + int prescaler) { const struct mpc_i2c_divider *div = NULL; unsigned int pvr = mfspr(SPRN_PVR); @@ -215,9 +216,9 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler) return div ? (int)div->fdr : -EINVAL; } -static void mpc_i2c_setclock_52xx(struct device_node *node, - struct mpc_i2c *i2c, - u32 clock, u32 prescaler) +static void __init mpc_i2c_setclock_52xx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock, u32 prescaler) { int ret, fdr; @@ -230,15 +231,15 @@ static void mpc_i2c_setclock_52xx(struct device_node *node, dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); } #else /* !CONFIG_PPC_MPC52xx */ -static void mpc_i2c_setclock_52xx(struct device_node *node, - struct mpc_i2c *i2c, - u32 clock, u32 prescaler) +static void __init mpc_i2c_setclock_52xx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock, u32 prescaler) { } #endif /* CONFIG_PPC_MPC52xx*/ #ifdef CONFIG_FSL_SOC -static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { +static const struct __initdata mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123}, {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102}, {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127}, @@ -258,7 +259,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { {49152, 0x011e}, {61440, 0x011f} }; -u32 mpc_i2c_get_sec_cfg_8xxx(void) +static u32 __init mpc_i2c_get_sec_cfg_8xxx(void) { struct device_node *node = NULL; u32 __iomem *reg; @@ -287,7 +288,8 @@ u32 mpc_i2c_get_sec_cfg_8xxx(void) return val; } -int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler) +static int __init mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, + u32 prescaler) { const struct mpc_i2c_divider *div = NULL; u32 divider; @@ -320,9 +322,9 @@ int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler) return div ? (int)div->fdr : -EINVAL; } -static void mpc_i2c_setclock_8xxx(struct device_node *node, - struct mpc_i2c *i2c, - u32 clock, u32 prescaler) +static void __init mpc_i2c_setclock_8xxx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock, u32 prescaler) { int ret, fdr; @@ -338,9 +340,9 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node, } #else /* !CONFIG_FSL_SOC */ -static void mpc_i2c_setclock_8xxx(struct device_node *node, - struct mpc_i2c *i2c, - u32 clock, u32 prescaler) +static void __init mpc_i2c_setclock_8xxx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock, u32 prescaler) { } #endif /* CONFIG_FSL_SOC */ @@ -489,8 +491,8 @@ static struct i2c_adapter mpc_ops = { .timeout = HZ, }; -static int __devinit fsl_i2c_probe(struct of_device *op, - const struct of_device_id *match) +static int __init fsl_i2c_probe(struct of_device *op, + const struct of_device_id *match) { struct mpc_i2c *i2c; const u32 *prop; @@ -529,8 +531,8 @@ static int __devinit fsl_i2c_probe(struct of_device *op, clock = *prop; if (match->data) { - struct mpc_i2c_match_data *data = - (struct mpc_i2c_match_data *)match->data; + struct mpc_i2c_data *data = + (struct mpc_i2c_data *)match->data; data->setclock(op->node, i2c, clock, data->prescaler); } else { /* Backwards compatibility */ @@ -566,7 +568,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op, return result; }; -static int __devexit fsl_i2c_remove(struct of_device *op) +static int __exit fsl_i2c_remove(struct of_device *op) { struct mpc_i2c *i2c = dev_get_drvdata(&op->dev); @@ -582,44 +584,35 @@ static int __devexit fsl_i2c_remove(struct of_device *op) return 0; }; +static struct mpc_i2c_data __initdata mpc_i2c_data_52xx = { + .setclock = mpc_i2c_setclock_52xx, +}; + +static struct mpc_i2c_data __initdata mpc_i2c_data_8313 = { + .setclock = mpc_i2c_setclock_8xxx, +}; + +static struct mpc_i2c_data __initdata mpc_i2c_data_8543 = { + .setclock = mpc_i2c_setclock_8xxx, + .prescaler = 2, +}; + +static struct mpc_i2c_data __initdata mpc_i2c_data_8544 = { + .setclock = mpc_i2c_setclock_8xxx, + .prescaler = 3, +}; + static const struct of_device_id mpc_i2c_of_match[] = { - {.compatible = "mpc5200-i2c", - .data = &(struct mpc_i2c_match_data) { - .setclock = mpc_i2c_setclock_52xx, - }, - }, - {.compatible = "fsl,mpc5200b-i2c", - .data = &(struct mpc_i2c_match_data) { - .setclock = mpc_i2c_setclock_52xx, - }, - }, - {.compatible = "fsl,mpc5200-i2c", - .data = &(struct mpc_i2c_match_data) { - .setclock = mpc_i2c_setclock_52xx, - }, - }, - {.compatible = "fsl,mpc8313-i2c", - .data = &(struct mpc_i2c_match_data) { - .setclock = mpc_i2c_setclock_8xxx, - }, - }, - {.compatible = "fsl,mpc8543-i2c", - .data = &(struct mpc_i2c_match_data) { - .setclock = mpc_i2c_setclock_8xxx, - .prescaler = 2, - }, - }, - {.compatible = "fsl,mpc8544-i2c", - .data = &(struct mpc_i2c_match_data) { - .setclock = mpc_i2c_setclock_8xxx, - .prescaler = 3, - }, + {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, + {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, }, + {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, + {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, }, + {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, }, + {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, }, /* Backward compatibility */ - }, {.compatible = "fsl-i2c", }, {}, }; - MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); @@ -627,7 +620,7 @@ MODULE_DEVICE_TABLE(of, mpc_i2c_of_match); static struct of_platform_driver mpc_i2c_driver = { .match_table = mpc_i2c_of_match, .probe = fsl_i2c_probe, - .remove = __devexit_p(fsl_i2c_remove), + .remove = __exit_p(fsl_i2c_remove), .driver = { .owner = THIS_MODULE, .name = DRV_NAME, -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v3 2/3] i2c-mpc: add support for the MPC512x processors from Freescale 2010-01-26 19:28 ` [PATCH v3 1/3] i2c-mpc: use __init[data] for initialization functions and data Wolfgang Grandegger @ 2010-01-26 19:28 ` Wolfgang Grandegger 2010-01-26 19:28 ` [PATCH v3 3/3] powerpc: doc/dts-bindings: update doc of FSL I2C bindings Wolfgang Grandegger 0 siblings, 1 reply; 4+ messages in thread From: Wolfgang Grandegger @ 2010-01-26 19:28 UTC (permalink / raw) To: Linux-i2c; +Cc: Devicetree-discuss, Linuxppc-dev, Wolfgang Grandegger From: Wolfgang Grandegger <wg@denx.de> The "setclock" initialization functions have been renamed to "setup" because I2C interrupts must be enabled for the MPC512x. This requires to handle "fsl,preserve-clocking" in a slighly different way. Also, the old settings are now reported calling dev_dbg(). For the MPC512x the clock setup function of the MPC52xx can be re-used. Furthermore, the Kconfig help has been updated and corrected. Signed-off-by: Wolfgang Grandegger <wg@denx.de> --- drivers/i2c/busses/Kconfig | 7 +-- drivers/i2c/busses/i2c-mpc.c | 122 ++++++++++++++++++++++++++++++----------- 2 files changed, 92 insertions(+), 37 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 5f318ce..5477e41 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -418,13 +418,12 @@ config I2C_IXP2000 instead. config I2C_MPC - tristate "MPC107/824x/85xx/52xx/86xx" + tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx" depends on PPC32 help If you say yes to this option, support will be included for the - built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and - MPC85xx/MPC8641 family processors. The driver may also work on 52xx - family processors, though interrupts are known not to work. + built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx, + MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors. This driver can also be built as a module. If so, the module will be called i2c-mpc. diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 222f6b8..faea046 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -31,6 +31,9 @@ #define DRV_NAME "mpc-i2c" +#define MPC_I2C_CLOCK_SAFE 0 +#define MPC_I2C_CLOCK_PRESERVE (~0U) + #define MPC_I2C_FDR 0x04 #define MPC_I2C_CR 0x08 #define MPC_I2C_SR 0x0c @@ -67,9 +70,8 @@ struct mpc_i2c_divider { }; struct mpc_i2c_data { - void (*setclock)(struct device_node *node, - struct mpc_i2c *i2c, - u32 clock, u32 prescaler); + void (*setup)(struct device_node *node, struct mpc_i2c *i2c, + u32 clock, u32 prescaler); u32 prescaler; }; @@ -164,7 +166,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) return 0; } -#ifdef CONFIG_PPC_MPC52xx +#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) static const struct __initdata mpc_i2c_divider mpc_i2c_dividers_52xx[] = { {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, @@ -216,12 +218,18 @@ static int __init mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, return div ? (int)div->fdr : -EINVAL; } -static void __init mpc_i2c_setclock_52xx(struct device_node *node, - struct mpc_i2c *i2c, - u32 clock, u32 prescaler) +static void __init mpc_i2c_setup_52xx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock, u32 prescaler) { int ret, fdr; + if (clock == MPC_I2C_CLOCK_PRESERVE) { + dev_dbg(i2c->dev, "using fdr %d\n", + readb(i2c->base + MPC_I2C_FDR)); + return; + } + ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler); fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ @@ -230,13 +238,49 @@ static void __init mpc_i2c_setclock_52xx(struct device_node *node, if (ret >= 0) dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); } -#else /* !CONFIG_PPC_MPC52xx */ -static void __init mpc_i2c_setclock_52xx(struct device_node *node, +#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */ +static void __init mpc_i2c_setup_52xx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock, u32 prescaler) +{ +} +#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */ + +#ifdef CONFIG_PPC_MPC512x +static void __init mpc_i2c_setup_512x(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { + struct device_node *node_ctrl; + void __iomem *ctrl; + const u32 *pval; + u32 idx; + + /* Enable I2C interrupts for mpc5121 */ + node_ctrl = of_find_compatible_node(NULL, NULL, + "fsl,mpc5121-i2c-ctrl"); + if (node_ctrl) { + ctrl = of_iomap(node_ctrl, 0); + if (ctrl) { + /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */ + pval = of_get_property(node, "reg", NULL); + idx = (*pval & 0xff) / 0x20; + setbits32(ctrl, 1 << (24 + idx * 2)); + iounmap(ctrl); + } + of_node_put(node_ctrl); + } + + /* The clock setup for the 52xx works also fine for the 512x */ + mpc_i2c_setup_52xx(node, i2c, clock, prescaler); } -#endif /* CONFIG_PPC_MPC52xx*/ +#else /* CONFIG_PPC_MPC512x */ +static void __init mpc_i2c_setup_512x(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock, u32 prescaler) +{ +} +#endif /* CONFIG_PPC_MPC512x */ #ifdef CONFIG_FSL_SOC static const struct __initdata mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { @@ -322,12 +366,19 @@ static int __init mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, return div ? (int)div->fdr : -EINVAL; } -static void __init mpc_i2c_setclock_8xxx(struct device_node *node, - struct mpc_i2c *i2c, - u32 clock, u32 prescaler) +static void __init mpc_i2c_setup_8xxx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock, u32 prescaler) { int ret, fdr; + if (clock == MPC_I2C_CLOCK_PRESERVE) { + dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n", + readb(i2c->base + MPC_I2C_DFSRR), + readb(i2c->base + MPC_I2C_FDR)); + return; + } + ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler); fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ @@ -340,9 +391,9 @@ static void __init mpc_i2c_setclock_8xxx(struct device_node *node, } #else /* !CONFIG_FSL_SOC */ -static void __init mpc_i2c_setclock_8xxx(struct device_node *node, - struct mpc_i2c *i2c, - u32 clock, u32 prescaler) +static void __init mpc_i2c_setup_8xxx(struct device_node *node, + struct mpc_i2c *i2c, + u32 clock, u32 prescaler) { } #endif /* CONFIG_FSL_SOC */ @@ -496,7 +547,7 @@ static int __init fsl_i2c_probe(struct of_device *op, { struct mpc_i2c *i2c; const u32 *prop; - u32 clock = 0; + u32 clock = MPC_I2C_CLOCK_SAFE; int result = 0; int plen; @@ -525,21 +576,21 @@ static int __init fsl_i2c_probe(struct of_device *op, } } - if (!of_get_property(op->node, "fsl,preserve-clocking", NULL)) { + if (of_get_property(op->node, "fsl,preserve-clocking", NULL)) { + clock = MPC_I2C_CLOCK_PRESERVE; + } else { prop = of_get_property(op->node, "clock-frequency", &plen); if (prop && plen == sizeof(u32)) clock = *prop; + } - if (match->data) { - struct mpc_i2c_data *data = - (struct mpc_i2c_data *)match->data; - data->setclock(op->node, i2c, clock, data->prescaler); - } else { - /* Backwards compatibility */ - if (of_get_property(op->node, "dfsrr", NULL)) - mpc_i2c_setclock_8xxx(op->node, i2c, - clock, 0); - } + if (match->data) { + struct mpc_i2c_data *data = match->data; + data->setup(op->node, i2c, clock, data->prescaler); + } else { + /* Backwards compatibility */ + if (of_get_property(op->node, "dfsrr", NULL)) + mpc_i2c_setup_8xxx(op->node, i2c, clock, 0); } dev_set_drvdata(&op->dev, i2c); @@ -584,21 +635,25 @@ static int __exit fsl_i2c_remove(struct of_device *op) return 0; }; +static struct mpc_i2c_data __initdata mpc_i2c_data_512x = { + .setup = mpc_i2c_setup_512x, +}; + static struct mpc_i2c_data __initdata mpc_i2c_data_52xx = { - .setclock = mpc_i2c_setclock_52xx, + .setup = mpc_i2c_setup_52xx, }; static struct mpc_i2c_data __initdata mpc_i2c_data_8313 = { - .setclock = mpc_i2c_setclock_8xxx, + .setup = mpc_i2c_setup_8xxx, }; static struct mpc_i2c_data __initdata mpc_i2c_data_8543 = { - .setclock = mpc_i2c_setclock_8xxx, + .setup = mpc_i2c_setup_8xxx, .prescaler = 2, }; static struct mpc_i2c_data __initdata mpc_i2c_data_8544 = { - .setclock = mpc_i2c_setclock_8xxx, + .setup = mpc_i2c_setup_8xxx, .prescaler = 3, }; @@ -606,6 +661,7 @@ static const struct of_device_id mpc_i2c_of_match[] = { {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, }, {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, }, + {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, }, {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, }, {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, }, {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, }, @@ -648,5 +704,5 @@ module_exit(fsl_i2c_exit); MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and " - "MPC824x/85xx/52xx processors"); + "MPC824x/85xx/512x/52xx processors"); MODULE_LICENSE("GPL"); -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v3 3/3] powerpc: doc/dts-bindings: update doc of FSL I2C bindings 2010-01-26 19:28 ` [PATCH v3 2/3] i2c-mpc: add support for the MPC512x processors from Freescale Wolfgang Grandegger @ 2010-01-26 19:28 ` Wolfgang Grandegger 0 siblings, 0 replies; 4+ messages in thread From: Wolfgang Grandegger @ 2010-01-26 19:28 UTC (permalink / raw) To: Linux-i2c; +Cc: Devicetree-discuss, Linuxppc-dev, Wolfgang Grandegger From: Wolfgang Grandegger <wg@denx.de> This patch adds the MPC5121 to the list of supported devices, enhances the doc of the "clock-frequency" property and removes the obsolete "cell-index" property from the example nodes. Furthermore and example for the MPC5121 has been added. Signed-off-by: Wolfgang Grandegger <wg@denx.de> --- Documentation/powerpc/dts-bindings/fsl/i2c.txt | 30 +++++++++++++++++++---- 1 files changed, 24 insertions(+), 6 deletions(-) diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt index b6d2e21..2f62dae 100644 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -9,8 +9,9 @@ Recommended properties : - compatible : compatibility list with 2 entries, the first should be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor, - e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one - should be "fsl-i2c". + e.g. mpc8313, mpc8543, mpc8544, mpc5121, mpc5200 or mpc5200b. The + second one should be "fsl-i2c". For the mpc5121, an additional node + "fsl,mpc5121-i2c-ctrl" is required as shown in the example below. - interrupts : <a b> where a is the interrupt number and b is a field that represents an encoding of the sense and level information for the interrupt. This should be encoded based on @@ -20,29 +21,46 @@ Recommended properties : services interrupts for this device. - fsl,preserve-clocking : boolean; if defined, the clock settings from the bootloader are preserved (not touched). - - clock-frequency : desired I2C bus clock frequency in Hz. + - clock-frequency : desired I2C bus clock frequency in Hz. If this + property and "fsl,preserve-clocking" is not defined, a safe fixed + clock divider value is used (resulting in a small clock frequency). Examples : + /* MPC5121 based board */ + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <100000>; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + /* MPC5200B based board */ i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; interrupts = <2 15 0>; interrupt-parent = <&mpc5200_pic>; fsl,preserve-clocking; }; + /* MPC8544 base board */ i2c@3100 { #address-cells = <1>; #size-cells = <0>; - cell-index = <1>; compatible = "fsl,mpc8544-i2c", "fsl-i2c"; reg = <0x3100 0x100>; interrupts = <43 2>; interrupt-parent = <&mpic>; clock-frequency = <400000>; }; - -- 1.6.2.5 ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-01-26 19:28 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-01-26 19:28 [PATCH v3 0/3] i2c-mpc: add support for the Freescale MPC512x and other fixes Wolfgang Grandegger 2010-01-26 19:28 ` [PATCH v3 1/3] i2c-mpc: use __init[data] for initialization functions and data Wolfgang Grandegger 2010-01-26 19:28 ` [PATCH v3 2/3] i2c-mpc: add support for the MPC512x processors from Freescale Wolfgang Grandegger 2010-01-26 19:28 ` [PATCH v3 3/3] powerpc: doc/dts-bindings: update doc of FSL I2C bindings Wolfgang Grandegger
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox