* [PATCH v2 1/3] powerpc/dts: Factorize the clock control node
@ 2014-11-06 15:48 Emil Medve
2014-11-06 15:48 ` [PATCH v2 2/3] dt/bindings: qoriq-clock: Add binding for the platform PLL Emil Medve
2014-11-06 15:48 ` [PATCH v2 3/3] powerpc/dts: Add node(s) " Emil Medve
0 siblings, 2 replies; 3+ messages in thread
From: Emil Medve @ 2014-11-06 15:48 UTC (permalink / raw)
To: scottwood, yuantian.tang, linuxppc-dev, devicetree; +Cc: Emil Medve
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I25ce24a25862b4ca460164159867abefe00ccdd1
---
v2: Whitespace fixes
arch/powerpc/boot/dts/b4860emu.dts | 4 +-
arch/powerpc/boot/dts/fsl/b4420si-post.dtsi | 28 +--------
arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 28 +--------
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 48 +---------------
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 48 +---------------
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 48 +---------------
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 48 +---------------
arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 48 +---------------
arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi | 78 ++++++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 61 ++++++++++++++++++++
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 30 +---------
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 29 +---------
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 29 +---------
arch/powerpc/boot/dts/t4240emu.dts | 4 +-
14 files changed, 163 insertions(+), 368 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
diff --git a/arch/powerpc/boot/dts/b4860emu.dts b/arch/powerpc/boot/dts/b4860emu.dts
index 85646b4..2aa5cd3 100644
--- a/arch/powerpc/boot/dts/b4860emu.dts
+++ b/arch/powerpc/boot/dts/b4860emu.dts
@@ -193,9 +193,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "fsl/qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
- reg = <0xe1000 0x1000>;
};
/include/ "fsl/qoriq-dma-0.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
index b34c62e..aced374 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -80,33 +80,9 @@
compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
mux0: mux0@0 {
#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
index 256fac8..3b9bb37 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -273,33 +273,9 @@
compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
mux0: mux0@0 {
#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index f297514..3320341 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -313,53 +313,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
mux2: mux2@40 {
#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index b3f89ce..b28964f 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -340,53 +340,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
mux2: mux2@40 {
#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index e410b15..eb043a7 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -360,35 +360,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
pll2: pll2@840 {
#clock-cells = <1>;
@@ -406,24 +380,6 @@
clock-output-names = "pll3", "pll3-div2";
};
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
-
mux2: mux2@40 {
#clock-cells = <0>;
reg = <0x40 0x4>;
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index d07c771..b70c8c3 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -345,53 +345,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
};
rcpm: global-utilities@e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 243574b..b459b7e 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -305,53 +305,9 @@
#sleep-cells = <2>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen1.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
mux2: mux2@40 {
#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
new file mode 100644
index 0000000..4871048
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
@@ -0,0 +1,78 @@
+/*
+ * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+global-utilities@e1000 {
+ compatible = "fsl,qoriq-clockgen-1.0";
+ ranges = <0x0 0xe1000 0x1000>;
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock";
+ clock-output-names = "sysclk";
+ };
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+ mux0: mux0@0 {
+ #clock-cells = <0>;
+ reg = <0x0 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux0";
+ };
+ mux1: mux1@20 {
+ #clock-cells = <0>;
+ reg = <0x20 0x4>;
+ compatible = "fsl,qoriq-core-mux-1.0";
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux1";
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
new file mode 100644
index 0000000..5d18d2a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
@@ -0,0 +1,61 @@
+/*
+ * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+global-utilities@e1000 {
+ compatible = "fsl,qoriq-clockgen-2.0";
+ ranges = <0x0 0xe1000 0x1000>;
+ reg = <0xe1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysclk: sysclk {
+ #clock-cells = <0>;
+ compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock";
+ clock-output-names = "sysclk";
+ };
+ pll0: pll0@800 {
+ #clock-cells = <1>;
+ reg = <0x800 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+ };
+ pll1: pll1@820 {
+ #clock-cells = <1>;
+ reg = <0x820 0x4>;
+ compatible = "fsl,qoriq-core-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index e989b6a..b726be1 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -432,35 +432,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk", "fixed-clock";
- };
-
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
mux0: mux0@0 {
#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index dfbe499..b71dd1c 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -553,34 +553,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk", "fixed-clock";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
mux0: mux0@0 {
#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index d2ecd86..c0fcd6b 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -1032,34 +1032,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
- ranges = <0x0 0xe1000 0x1000>;
- reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-2.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2", "pll0-div4";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-2.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2", "pll1-div4";
- };
pll2: pll2@840 {
#clock-cells = <1>;
diff --git a/arch/powerpc/boot/dts/t4240emu.dts b/arch/powerpc/boot/dts/t4240emu.dts
index bc12127a..decaf35 100644
--- a/arch/powerpc/boot/dts/t4240emu.dts
+++ b/arch/powerpc/boot/dts/t4240emu.dts
@@ -250,9 +250,9 @@
fsl,liodn-bits = <12>;
};
- clockgen: global-utilities@e1000 {
+/include/ "fsl/qoriq-clockgen2.dtsi"
+ global-utilities@e1000 {
compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
- reg = <0xe1000 0x1000>;
};
/include/ "fsl/qoriq-dma-0.dtsi"
--
2.1.3
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2 2/3] dt/bindings: qoriq-clock: Add binding for the platform PLL
2014-11-06 15:48 [PATCH v2 1/3] powerpc/dts: Factorize the clock control node Emil Medve
@ 2014-11-06 15:48 ` Emil Medve
2014-11-06 15:48 ` [PATCH v2 3/3] powerpc/dts: Add node(s) " Emil Medve
1 sibling, 0 replies; 3+ messages in thread
From: Emil Medve @ 2014-11-06 15:48 UTC (permalink / raw)
To: scottwood, yuantian.tang, linuxppc-dev, devicetree; +Cc: Emil Medve
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I7950afa9650d15ec7ce2cca89bb2a1e38586d4a5
---
v2: Whitespace fixes
Documentation/devicetree/bindings/clock/qoriq-clock.txt | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index 5666812..266ff9d 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -62,6 +62,8 @@ Required properties:
It takes parent's clock-frequency as its clock.
* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
It takes parent's clock-frequency as its clock.
+ * "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
+ * "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
- #clock-cells: From common clock binding. The number of cells in a
clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
@@ -128,8 +130,16 @@ Example for clock block and clock provider:
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux1";
};
+
+ platform-pll: platform-pll@c00 {
+ #clock-cells = <1>;
+ reg = <0xc00 0x4>;
+ compatible = "fsl,qoriq-platform-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "platform-pll", "platform-pll-div2";
+ };
};
- }
+};
Example for clock consumer:
@@ -139,4 +149,4 @@ Example for clock consumer:
clocks = <&mux0>;
...
};
- }
+};
--
2.1.3
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2 3/3] powerpc/dts: Add node(s) for the platform PLL
2014-11-06 15:48 [PATCH v2 1/3] powerpc/dts: Factorize the clock control node Emil Medve
2014-11-06 15:48 ` [PATCH v2 2/3] dt/bindings: qoriq-clock: Add binding for the platform PLL Emil Medve
@ 2014-11-06 15:48 ` Emil Medve
1 sibling, 0 replies; 3+ messages in thread
From: Emil Medve @ 2014-11-06 15:48 UTC (permalink / raw)
To: scottwood, yuantian.tang, linuxppc-dev, devicetree; +Cc: Emil Medve
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: If76cd705a01813abe53396c1486bc13c4289ee92
---
arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi | 7 +++++++
arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 7 +++++++
2 files changed, 14 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
index 4871048..4ece1ed 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
@@ -75,4 +75,11 @@ global-utilities@e1000 {
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux1";
};
+ platform_pll: platform-pll@c00 {
+ #clock-cells = <1>;
+ reg = <0xc00 0x4>;
+ compatible = "fsl,qoriq-platform-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "platform-pll", "platform-pll-div2";
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
index 5d18d2a..48e0b6e 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
@@ -58,4 +58,11 @@ global-utilities@e1000 {
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2", "pll1-div4";
};
+ platform_pll: platform-pll@c00 {
+ #clock-cells = <1>;
+ reg = <0xc00 0x4>;
+ compatible = "fsl,qoriq-platform-pll-2.0";
+ clocks = <&sysclk>;
+ clock-output-names = "platform-pll", "platform-pll-div2";
+ };
};
--
2.1.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-11-06 15:57 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-11-06 15:48 [PATCH v2 1/3] powerpc/dts: Factorize the clock control node Emil Medve
2014-11-06 15:48 ` [PATCH v2 2/3] dt/bindings: qoriq-clock: Add binding for the platform PLL Emil Medve
2014-11-06 15:48 ` [PATCH v2 3/3] powerpc/dts: Add node(s) " Emil Medve
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox