* Galnet-II+ / PowerPC 82xx support
@ 2003-05-15 9:59 w.n. jacobs
0 siblings, 0 replies; only message in thread
From: w.n. jacobs @ 2003-05-15 9:59 UTC (permalink / raw)
To: linuxppc-embedded
We are currently developing a system based on Marvell's Galnet-II+ family
(GT-48300 crossbar switch and the GT-48350 ethernet switch) managed by a
MPC8250.
A search for Linux support (except the MPC82xx PCI driver) for above Galnet-II+
chip-set did not result in any hits. Are there Linux drivers for this chip-set
(or compatible Galnet-II chips) already developed?
For quick software development we are also looking for COTS development boards
(stand-alone, VME, cPCI) based on the Galnet-II+ and a MPC82xx (with
PCI). Currently only Interface Concept has two boards based on a MPC860 (direct
CPU connection to the Galnet), but no PCI connection to the Galnet. Marvell also
does not have development board(s) for this configuration.
Are there alternative boards somewhere available?
--
willy
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-05-15 9:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-05-15 9:59 Galnet-II+ / PowerPC 82xx support w.n. jacobs
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox