* How to initialize the extended ROM/Flash interface of MPC8245?
@ 2005-01-19 5:57 chao yu
0 siblings, 0 replies; only message in thread
From: chao yu @ 2005-01-19 5:57 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 533 bytes --]
Hi,all
I have a CPLD connected to the RCS3 of MPC 8245 processor.
Does the initialization of MPC8245's extended rom interface follow the two steps below?
1. Set the Bit 21 of MCCR registers with 1 to enable the extended rom/falsh interface?
2. Set the ERCR2 register(0xD4) and ERCR4 register(0xDC).
Any extra steps must be go? Thx.
Regards,
Yu.Chao
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[-- Attachment #2: Type: text/html, Size: 778 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-01-19 5:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-19 5:57 How to initialize the extended ROM/Flash interface of MPC8245? chao yu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox