fix oops due to i2c-keylarge -> i2c-powermac rename

fix oops due to i2c-keylarge -> i2c-powermac rename

[Guido Guenther]

Hi,
the i2c-keywest module has been renamed to i2c-powermac during the
2.6.16 development cycle. This fixes the corresponding request_module
calls so the module gets loaded again and we don't oops on i2c accesses.
Patch applies against current Linus git. Please apply:

Singend-Off-By: Guido Guenther <agx@sigxcpu.org>

--- orig/linux-2.6.16.7/sound/ppc/tumbler.c	2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16.7/sound/ppc/tumbler.c	2006-04-19 23:15:20.000000000 +0200
@@ -1314,7 +1314,7 @@
 
 #ifdef CONFIG_KMOD
 	if (current->fs->root)
-		request_module("i2c-keywest");
+		request_module("i2c-powermac");
 #endif /* CONFIG_KMOD */	
 
 	mix = kmalloc(sizeof(*mix), GFP_KERNEL);
--- orig/linux-2.6.16.7/sound/ppc/daca.c	2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16.7/sound/ppc/daca.c	2006-04-19 23:14:33.000000000 +0200
@@ -256,7 +256,7 @@
 
 #ifdef CONFIG_KMOD
 	if (current->fs->root)
-		request_module("i2c-keywest");
+		request_module("i2c-powermac");
 #endif /* CONFIG_KMOD */	
 
 	mix = kmalloc(sizeof(*mix), GFP_KERNEL);
--- orig/linux-2.6.16.7/sound/oss/dmasound/tas_common.c	2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16.7/sound/oss/dmasound/tas_common.c	2006-04-20 20:46:55.000000000 +0200
@@ -195,8 +195,8 @@
 
 	printk(KERN_INFO "tas driver [%s])\n", driver_name);
 
-#ifndef CONFIG_I2C_KEYWEST
-	request_module("i2c-keywest");
+#ifndef CONFIG_I2C_POWERMAC
+	request_module("i2c-powermac");
 #endif
 	tas_node = find_devices("deq");
 	if (tas_node == NULL)
--- orig/linux-2.6.16.7/drivers/macintosh/therm_adt746x.c	2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16.7/drivers/macintosh/therm_adt746x.c	2006-04-20 20:45:32.000000000 +0200
@@ -627,8 +627,8 @@
 	if(therm_type == ADT7460)
 		device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
 
-#ifndef CONFIG_I2C_KEYWEST
-	request_module("i2c-keywest");
+#ifndef CONFIG_I2C_POWERMAC
+	request_module("i2c-powermac");
 #endif
 
 	return i2c_add_driver(&thermostat_driver);

Cheers,
 -- Guido