eldk4.0 ppc_85xx-gdb failure while debugging with BDI2000

[emre kara <emrekara2002@yahoo.co.uk>]

Dear All;
Is there any one use BDI2000 ppc_85xx-gdb (coming with
ELDK4.0 dist). Please examine the log below. 
Target is waiting in start_kernel func.

ppc_85xx-gdb vmlinux
......
......
(gdb) target remote 192.168.101.101:2001
Remote debugging using 192.168.101.101:2001
0x00000000 in ?? ()
(gdb) q

gdb can not display correct addr and debug anything.
but at this state, older version toolchain (eldk3.1)
is working properly.

Second problem, I have check denx web site for an gdb
update and found
gdb-ppc_85xx-6.3.0.0-1.21_3.ppc.rpm,but instalation
fails with the error below.
-----------------------------------------
ppc_85xx-rpm -U gdb-ppc_85xx-6.3.0.0-1.21_3.ppc.rpm
error: Failed dependencies:
        info-ppc_85xx is needed by
gdb-ppc_85xx-6.3.0.0-1.21_3.ppc
------------------------------------------

 Here is my bdi configuration file:
--------------------------------------------------
;bdiGDB configuration file for MPC8540ADS
;----------------------------------------

[INIT]
 WM32 0x000000f0 0x00000000 ;invalidate page table
base


[TARGET]
CPUTYPE     8540  ;the CPU type
JTAGCLOCK   0     ;use 16 MHz JTAG clock
STARTUP     STOP 100 ;halt core while HRESET is
asserted
BREAKMODE   SOFT  ;SOFT or HARD, HARD uses PPC
hardware breakpoint
STEPMODE    HWBP  ;JTAG or HWBP, HWBP uses a hardware
breakpoint
MMU         XLAT; for kernel debug
PTBASE      0xf0;for kernel debug
WAKEUP      500   ;give reset time to complete
POWERUP     5000  ;start delay after power-up detected
in ms

[HOST]
PROMPT 8540_KRNL>

[REGS]
FILE        $reg8560.def

How can I solve this problems?

Thanks.

Emre




	
	
		
___________________________________________________________ 
All new Yahoo! Mail "The new Interface is stunning in its simplicity and ease of use." - PC Magazine 
http://uk.docs.yahoo.com/nowyoucan.html