* Yosemite board w/ppc440ep NETDEV WATCHDOG: eth0: transmit timed out
@ 2006-09-05 16:14 Michael Alievsky
0 siblings, 0 replies; 2+ messages in thread
From: Michael Alievsky @ 2006-09-05 16:14 UTC (permalink / raw)
To: linuxppc-embedded
Hi Rocky,
We have experienced absolutely the same problem with the Yosemite board.
The problem is releated to the simultanious recieve on both Ethernet ports.
Did you get more information about the problem?
Regards,
Michael Alievsky
^ permalink raw reply [flat|nested] 2+ messages in thread
* Yosemite board w/ppc440ep NETDEV WATCHDOG: eth0: transmit timed out
@ 2006-06-29 1:10 Rocky Mussadi
0 siblings, 0 replies; 2+ messages in thread
From: Rocky Mussadi @ 2006-06-29 1:10 UTC (permalink / raw)
To: linuxppc-embedded
Hi,
We are on the Yosemite reference board with IBM PPC440EP ver 2.0. On
this board, if we pass traffic from eth0 to eth1 and back, we run into
an eth0 and eth1 transmit lockup consistently. We use "nuttcp -T 2" to
generate the traffic. The interfaces are operating at 100/full
(autonegotiated). We have seen this with several different kernels up to
kernel 2.6.17. When the lockup occurs we see the message:
NETDEV WATCHDOG: eth0: transmit timed out
The only way to recover is via reboot.
Please note, we are running no software on the board except for the
kernel. This is the kernel that came with the reference board. The
driver being used is the ibm_emac driver.
Thanks for any help!
Rocky
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-09-05 16:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-09-05 16:14 Yosemite board w/ppc440ep NETDEV WATCHDOG: eth0: transmit timed out Michael Alievsky
-- strict thread matches above, loose matches on Subject: below --
2006-06-29 1:10 Rocky Mussadi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox