[PATCH] I2C: Add I2C support for the MPC8260

* [PATCH] I2C: Add I2C support for the MPC8260
@ 2005-11-21 15:55 Heiko Schocher
  2005-11-23  7:01 ` Kumar Gala
  0 siblings, 1 reply; 7+ messages in thread
From: Heiko Schocher @ 2005-11-21 15:55 UTC (permalink / raw)
  To: linuxppc-dev; +Cc: lm-sensors

Hello,

the following Patch (against 2.6 kernel.org tree, COMMIT_ID:
f093182d313edde9b1f86dbdaf40ba4da2dbd0e7) adds support for
the I2C on a MPC8260.
---
 drivers/i2c/busses/Kconfig       |   10 +
 drivers/i2c/busses/Makefile      |    1
 drivers/i2c/busses/i2c-mpc8260.c |  617 ++++++++++++++++++++++++++++++++++++++
 include/linux/i2c-algo-8260.h    |   26 ++
 include/linux/i2c-id.h           |    3
 5 files changed, 657 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4010fe9..77f9c69 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -270,6 +270,16 @@ config I2C_MPC
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mpc.

+config I2C_MPC8260
+	tristate "MPC 8260"
+	depends on I2C && PPC32
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface on the MPC8260.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-m8260.
+
 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
 	depends on I2C && PCI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index f1df00f..b4d8cea 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
 obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
+obj-$(CONFIG_I2C_MPC8260)	+= i2c-mpc8260.o

 ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/busses/i2c-mpc8260.c b/drivers/i2c/busses/i2c-mpc8260.c
new file mode 100644
index 0000000..f1bfa51
--- /dev/null
+++ b/drivers/i2c/busses/i2c-mpc8260.c
@@ -0,0 +1,617 @@
+/*
+ * (C) Copyright 2005
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This is a combined i2c adapter and algorithm driver for the
+ * MPC8260 Processor
+ *
+ * Release 0.1
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+
+#include <linux/i2c-algo-8260.h>
+#include <linux/platform_device.h>
+
+#define CPM_MAX_READ	513
+
+static wait_queue_head_t iic_wait;
+static ushort r_tbase, r_rbase;
+
+int cpm_scan = 0;
+int cpm_debug = 0;
+
+struct mpc_i2c {
+	u32 interrupt;
+	wait_queue_head_t queue;
+	struct i2c_adapter adap;
+	int irq;
+	u32 flags;
+	struct i2c_algo_8260_data *data;
+};
+
+static struct i2c_algo_8260_data pm82x_data;
+
+static void
+mpc8260_iic_init(struct i2c_algo_8260_data *data)
+{
+	volatile cpm_cpm2_t *cp;
+	volatile cpm2_map_t *immap;
+
+	cp = cpmp;	/* Get pointer to Communication Processor */
+	immap = (cpm2_map_t *)CPM_MAP_ADDR;	/* and to internal registers */
+
+	*(ushort *)(&immap->im_dprambase[PROFF_I2C_BASE]) = PROFF_I2C;
+	data->iip = (iic_t *)&immap->im_dprambase[PROFF_I2C];
+
+	data->i2c = (i2c_cpm2_t *)&(immap->im_i2c);
+	data->cp = cp;
+
+	/* Initialize Port D IIC pins.
+	*/
+	immap->im_ioport.iop_ppard |= 0x00030000;
+	immap->im_ioport.iop_pdird &= ~0x00030000;
+	immap->im_ioport.iop_podrd |= 0x00030000;
+	immap->im_ioport.iop_psord |= 0x00030000;
+
+	/* Allocate space for two transmit and two receive buffer
+	 * descriptors in the DP ram.
+	 */
+	data->dp_addr = cpm_dpalloc(sizeof(cbd_t) * 4, 8);
+
+	/* ptr to i2c area */
+	data->i2c = (i2c_cpm2_t *)&(((cpm2_map_t *)CPM_MAP_ADDR)->im_i2c);
+}
+
+static irqreturn_t mpc8260_i2c_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct mpc_i2c *mpc_i2c = dev_id;
+	struct i2c_algo_8260_data *cpm_adap = mpc_i2c->data;
+	volatile i2c_cpm2_t *i2c = cpm_adap->i2c;
+
+	if (cpm_debug > 1)
+		printk(KERN_DEBUG "cpm_iic_interrupt(dev_id=%p)\n", dev_id);
+
+	/* Clear interrupt.
+	*/
+	i2c->i2c_i2cer = 0xff;
+
+	/* Get 'me going again.
+	*/
+	wake_up_interruptible(&iic_wait);
+	return IRQ_HANDLED;
+}
+
+
+static void
+cpm_iic_init(struct i2c_algo_8260_data *cpm_adap)
+{
+	volatile iic_t		*iip = cpm_adap->iip;
+	volatile i2c_cpm2_t	*i2c = cpm_adap->i2c;
+
+	if (cpm_debug) printk(KERN_DEBUG "cpm_iic_init() - iip=%p\n",iip);
+
+	/* Initialize the parameter ram.
+	 * We need to make sure many things are initialized to zero,
+	 * especially in the case of a microcode patch.
+	 */
+	iip->iic_rstate = 0;
+	iip->iic_rdp = 0;
+	iip->iic_rbptr = 0;
+	iip->iic_rbc = 0;
+	iip->iic_rxtmp = 0;
+	iip->iic_tstate = 0;
+	iip->iic_tdp = 0;
+	iip->iic_tbptr = 0;
+	iip->iic_tbc = 0;
+	iip->iic_txtmp = 0;
+
+	/* Set up the IIC parameters in the parameter ram.
+	*/
+	iip->iic_tbase = r_tbase = cpm_adap->dp_addr;
+	iip->iic_rbase = r_rbase = cpm_adap->dp_addr + sizeof(cbd_t)*2;
+
+	iip->iic_tfcr = CPMFCR_GBL | CPMFCR_EB;
+	iip->iic_rfcr = CPMFCR_GBL | CPMFCR_EB;
+
+	/* Set maximum receive size.
+	*/
+	iip->iic_mrblr = CPM_MAX_READ;
+
+		/* Initialize Tx/Rx parameters.
+		*/
+	{
+		volatile cpm_cpm2_t *cp = cpm_adap->cp;
+		cp->cp_cpcr =
+			mk_cr_cmd(CPM_CR_I2C_PAGE, CPM_CR_I2C_SBLOCK, 0x00, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+		while (cp->cp_cpcr & CPM_CR_FLG);
+	}
+
+	/* Select an arbitrary address.  Just make sure it is unique.
+	*/
+	i2c->i2c_i2add = 0x34;
+
+	/* Divider is 2 * ( 15 + 3 )
+	*/
+	i2c->i2c_i2brg = 0x0f;
+
+	/* Pre-divider is BRGCLK/4
+	 */
+	i2c->i2c_i2mod = 0x06;
+
+	/* Disable interrupts.
+	*/
+	i2c->i2c_i2cmr = 0;
+	i2c->i2c_i2cer = 0xff;
+
+	init_waitqueue_head(&iic_wait);
+}
+
+
+#if 0
+static int
+cpm_iic_shutdown(struct i2c_algo_8260_data *cpm_adap)
+{
+	volatile i2c_cpm2_t *i2c = cpm_adap->i2c;
+
+	/* Shut down IIC.
+	*/
+	i2c->i2c_i2mod = 0;
+	i2c->i2c_i2cmr = 0;
+	i2c->i2c_i2cer = 0xff;
+
+	return(0);
+}
+#endif
+
+static void
+cpm_reset_iic_params(volatile iic_t *iip)
+{
+	iip->iic_tbase = r_tbase;
+	iip->iic_rbase = r_rbase;
+
+	iip->iic_tfcr = CPMFCR_GBL | CPMFCR_EB;
+	iip->iic_rfcr = CPMFCR_GBL | CPMFCR_EB;
+
+	iip->iic_mrblr = CPM_MAX_READ;
+
+	iip->iic_rstate = 0;
+	iip->iic_rdp = 0;
+	iip->iic_rbptr = 0;
+	iip->iic_rbc = 0;
+	iip->iic_rxtmp = 0;
+	iip->iic_tstate = 0;
+	iip->iic_tdp = 0;
+	iip->iic_tbptr = 0;
+	iip->iic_tbc = 0;
+	iip->iic_txtmp = 0;
+}
+
+#define BD_SC_NAK		((ushort)0x0004) /* NAK - did not respond */
+#define CPM_CR_CLOSE_RXBD	((ushort)0x0007)
+
+static void force_close(struct i2c_algo_8260_data *cpm)
+{
+#if 0
+	volatile cpm_cpm2_t *cp = cpm->cp;
+
+	if (cpm_debug) printk(KERN_DEBUG "force_close()\n");
+	cp->cp_cpcr =
+		mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_CLOSE_RXBD) |
+		CPM_CR_FLG;
+
+	while (cp->cp_cpcr & CPM_CR_FLG);
+#endif
+}
+
+
+/* Read from IIC...
+ * abyte = address byte, with r/w flag already set
+ */
+static int
+cpm_iic_read(struct i2c_algo_8260_data *cpm, u_char abyte, char *buf, int count)
+{
+	volatile cpm2_map_t *immap = (cpm2_map_t *)CPM_MAP_ADDR;
+	volatile iic_t *iip = cpm->iip;
+	volatile i2c_cpm2_t *i2c = cpm->i2c;
+	volatile cbd_t	*tbdf, *rbdf;
+	u_char *tb;
+	unsigned long flags;
+
+	if (count >= CPM_MAX_READ)
+		return -EINVAL;
+
+	tbdf = (cbd_t *)&immap->im_dprambase[iip->iic_tbase];
+	rbdf = (cbd_t *)&immap->im_dprambase[iip->iic_rbase];
+
+	/* To read, we need an empty buffer of the proper length.
+	 * All that is used is the first byte for address, the remainder
+	 * is just used for timing (and doesn't really have to exist).
+	 */
+	if (/*cpm->reloc*/0) {
+		cpm_reset_iic_params(iip);
+	}
+	tb = cpm->temp;
+	tb = (u_char *)(((uint)tb + 15) & ~15);
+	tb[0] = abyte;		/* Device address byte w/rw flag */
+
+	dma_cache_wback_inv (tb, 1);
+
+	if (cpm_debug) printk(KERN_DEBUG "cpm_iic_read(abyte=0x%x)\n", abyte);
+
+	tbdf->cbd_bufaddr = __pa(tb);
+	tbdf->cbd_datlen = count + 1;
+	tbdf->cbd_sc =
+		BD_SC_READY | BD_SC_INTRPT | BD_SC_LAST |
+		BD_SC_WRAP | BD_IIC_START;
+
+	rbdf->cbd_datlen = 0;
+	rbdf->cbd_bufaddr = __pa(buf);
+	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+
+	if (count > 0 && count < CPM_MAX_READ)
+		iip->iic_mrblr = count;	/* prevent excessive read */
+
+	dma_cache_inv (buf, count);
+
+	/* Chip bug, set enable here */
+	local_irq_save(flags);
+	i2c->i2c_i2cmr = 0x13;	/* Enable some interupts */
+	i2c->i2c_i2cer = 0xff;
+	i2c->i2c_i2mod |= 1;	/* Enable */
+	i2c->i2c_i2com = 0x81;	/* Start master */
+
+	/* Wait for IIC transfer */
+	interruptible_sleep_on(&iic_wait);
+	local_irq_restore(flags);
+	if (signal_pending(current))
+		return -EIO;
+
+	if (cpm_debug) {
+		printk(KERN_DEBUG "tx sc %04x, rx sc %04x\n",
+		       tbdf->cbd_sc, rbdf->cbd_sc);
+	}
+
+	if (tbdf->cbd_sc & BD_SC_NAK) {
+		printk(KERN_INFO "IIC read; no ack\n");
+		return 0;
+	}
+
+	if (rbdf->cbd_sc & BD_SC_EMPTY) {
+		printk(KERN_INFO "IIC read; complete but rbuf empty\n");
+		force_close(cpm);
+		printk(KERN_INFO "tx sc %04x, rx sc %04x\n",
+		       tbdf->cbd_sc, rbdf->cbd_sc);
+	}
+
+	if (cpm_debug) printk(KERN_DEBUG "read %d bytes\n", rbdf->cbd_datlen);
+
+	if (rbdf->cbd_datlen < count) {
+		printk(KERN_INFO "IIC read; short, wanted %d got %d\n",
+		       count, rbdf->cbd_datlen);
+		return 0;
+	}
+	if (cpm_debug) {
+			int u;
+			for (u = 0; u < count; u++) {
+				printk(KERN_DEBUG "buf[%d] = 0x%x\n", u, buf[u]);
+			}
+			}
+
+
+	return count;
+}
+
+/* Write to IIC...
+ * addr = address byte, with r/w flag already set
+ */
+static int
+cpm_iic_write(struct i2c_algo_8260_data *cpm, u_char abyte, char *buf,int count)
+{
+	volatile cpm2_map_t *immap = (cpm2_map_t *)CPM_MAP_ADDR;
+	volatile iic_t *iip = cpm->iip;
+	volatile i2c_cpm2_t *i2c = cpm->i2c;
+	volatile cbd_t	*tbdf;
+	u_char *tb;
+	unsigned long flags;
+
+	tb = cpm->temp;
+	tb = (u_char *)(((uint)tb + 15) & ~15);
+	*tb = abyte;		/* Device address byte w/rw flag */
+
+	dma_cache_wback_inv (tb, 1);
+	dma_cache_wback_inv (buf, count);
+
+	if (cpm_debug) printk(KERN_DEBUG "cpm_iic_write(abyte=0x%x)\n", abyte);
+	if (cpm_debug) printk(KERN_DEBUG "buf[0] = 0x%x, buf[1] = 0x%x\n", buf[0], buf[1]);
+
+	/* set up 2 descriptors */
+	tbdf = (cbd_t *)&immap->im_dprambase[iip->iic_tbase];
+
+	tbdf[0].cbd_bufaddr = __pa(tb);
+	tbdf[0].cbd_datlen = 1;
+	tbdf[0].cbd_sc = BD_SC_READY | BD_IIC_START;
+
+	tbdf[1].cbd_bufaddr = __pa(buf);
+	tbdf[1].cbd_datlen = count;
+	tbdf[1].cbd_sc = BD_SC_READY | BD_SC_INTRPT | BD_SC_LAST | BD_SC_WRAP;
+
+	/* Chip bug, set enable here */
+	local_irq_save(flags);;
+	i2c->i2c_i2cmr = 0x13;	/* Enable some interupts */
+	i2c->i2c_i2cer = 0xff;
+	i2c->i2c_i2mod |= 1;	/* Enable */
+	i2c->i2c_i2com = 0x81;	/* Start master */
+
+	/* Wait for IIC transfer */
+	interruptible_sleep_on(&iic_wait);
+	local_irq_restore(flags);
+	if (signal_pending(current))
+		return -EIO;
+
+	if (cpm_debug) {
+		printk(KERN_DEBUG "tx0 sc %04x, tx1 sc %04x\n",
+		       tbdf[0].cbd_sc, tbdf[1].cbd_sc);
+	}
+
+	if (tbdf->cbd_sc & BD_SC_NAK) {
+		printk(KERN_INFO "IIC write; no ack\n");
+		return 0;
+	}
+
+	if (tbdf->cbd_sc & BD_SC_READY) {
+		printk(KERN_INFO "IIC write; complete but tbuf ready\n");
+		return 0;
+	}
+
+	return count;
+}
+
+#if 0
+/* See if an IIC address exists..
+ * addr = 7 bit address, unshifted
+ */
+static int
+cpm_iic_tryaddress(struct i2c_algo_8260_data *cpm, int addr)
+{
+	volatile cpm2_map_t *immap = (cpm2_map_t *)CPM_MAP_ADDR;
+	volatile iic_t *iip = cpm->iip;
+	volatile i2c_cpm2_t *i2c = cpm->i2c;
+	volatile cbd_t *tbdf, *rbdf;
+	u_char *tb;
+	unsigned long flags, len;
+
+	if (cpm_debug > 1)
+		printk(KERN_DEBUG "cpm_iic_tryaddress(cpm=%p,addr=%d)\n", cpm, addr);
+
+	if (cpm_debug && addr == 0) {
+		printk(KERN_DEBUG "iip %p, dp_addr 0x%x\n", cpm->iip, cpm->dp_addr);
+		printk(KERN_DEBUG "iic_tbase %d, r_tbase %d\n", iip->iic_tbase, r_tbase);
+	}
+
+	tbdf = (cbd_t *)&immap->im_dprambase[iip->iic_tbase];
+	rbdf = (cbd_t *)&immap->im_dprambase[iip->iic_rbase];
+
+	tb = cpm->temp;
+	tb = (u_char *)(((uint)tb + 15) & ~15);
+
+	/* do a simple read */
+	tb[0] = (addr << 1) | 1;	/* device address (+ read) */
+	len = 2;
+
+	dma_cache_wback_inv (tb, 1);
+
+	tbdf->cbd_bufaddr = __pa(tb);
+	tbdf->cbd_datlen = len;
+	tbdf->cbd_sc =
+		BD_SC_READY | BD_SC_INTRPT | BD_SC_LAST |
+		BD_SC_WRAP | BD_IIC_START;
+
+	rbdf->cbd_datlen = 0;
+	rbdf->cbd_bufaddr = __pa(tb+2);
+	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+
+	local_irq_save(flags);
+	i2c->i2c_i2cmr = 0x13;	/* Enable some interupts */
+	i2c->i2c_i2cer = 0xff;
+	i2c->i2c_i2mod |= 1;	/* Enable */
+	i2c->i2c_i2com = 0x81;	/* Start master */
+
+	if (cpm_debug > 1) printk(KERN_DEBUG "about to sleep\n");
+
+	/* wait for IIC transfer */
+	interruptible_sleep_on(&iic_wait);
+	local_irq_restore(flags);
+	if (signal_pending(current))
+		return -EIO;
+
+	if (cpm_debug > 1) printk(KERN_DEBUG "back from sleep\n");
+
+	if (tbdf->cbd_sc & BD_SC_NAK) {
+		if (cpm_debug > 1) printk(KERN_DEBUG "IIC try; no ack\n");
+		return 0;
+	}
+
+	if (tbdf->cbd_sc & BD_SC_READY) {
+		printk(KERN_INFO "IIC try; complete but tbuf ready\n");
+	}
+
+	return 1;
+}
+#endif
+
+static int mpc8260_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct i2c_msg *pmsg;
+	int i;
+	int ret = 0;
+	struct mpc_i2c *mpc_i2c = i2c_get_adapdata(adap);
+	struct i2c_algo_8260_data *data = mpc_i2c->data;
+	u_char addr;
+
+	for (i = 0; i < num; i++) {
+			pmsg = &msgs[i];
+
+		if (cpm_debug)
+			printk(KERN_DEBUG "i2c-algo-8260.o: "
+			       "#%d addr=0x%x flags=0x%x len=%d\n",
+			       i, pmsg->addr, pmsg->flags, pmsg->len);
+
+		addr = pmsg->addr << 1;
+		if (pmsg->flags & I2C_M_RD )
+			addr |= 1;
+		if (pmsg->flags & I2C_M_REV_DIR_ADDR )
+			addr ^= 1;
+
+		if (!(pmsg->flags & I2C_M_NOSTART)) {
+		}
+		if (pmsg->flags & I2C_M_RD ) {
+			/* read bytes into buffer*/
+			ret = cpm_iic_read(data, addr, pmsg->buf, pmsg->len);
+			if (cpm_debug)
+				printk(KERN_DEBUG "i2c-algo-8260.o: read %d bytes\n", ret);
+			if (ret < pmsg->len ) {
+				return (ret<0)? ret : -EREMOTEIO;
+			}
+		} else {
+			/* write bytes from buffer */
+			ret = cpm_iic_write(data, addr, pmsg->buf, pmsg->len);
+			if (cpm_debug)
+				printk(KERN_DEBUG "i2c-algo-8260.o: wrote %d\n", ret);
+			if (ret < pmsg->len ) {
+				return (ret<0) ? ret : -EREMOTEIO;
+			}
+		}
+	}
+	return (ret < 0) ? ret : num;
+}
+
+static u32 mpc8260_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+	       I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+static struct i2c_algorithm mpc8260_algo = {
+	.master_xfer = mpc8260_xfer,
+	.functionality = mpc8260_functionality,
+};
+
+static struct i2c_adapter mpc8260_ops = {
+	.owner = THIS_MODULE,
+	.name = "MPC 8260 adapter",
+	.id = I2C_HW_MPC8260,
+	.algo = &mpc8260_algo,
+	.class = I2C_CLASS_HWMON,
+	.timeout = 1,
+	.retries = 1
+};
+
+static int fsl_i2c_probe(struct device *device)
+{
+	int result = 0;
+	struct mpc_i2c *i2c;
+	struct platform_device *pdev = to_platform_device(device);
+	struct fsl_i2c_platform_data *pdata;
+
+	pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
+
+	if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
+		return -ENOMEM;
+	}
+	memset(i2c, 0, sizeof(*i2c));
+
+	i2c->data = &pm82x_data;
+	/* CPM Plattform initialisation */
+	mpc8260_iic_init (i2c->data);
+	/* CPM init */
+	cpm_iic_init (i2c->data);
+	i2c->irq = platform_get_irq(pdev, 0);
+
+	if (i2c->irq != 0) {
+		if ((result = request_irq(i2c->irq, mpc8260_i2c_isr,
+					  SA_SHIRQ, "i2c-mpc", i2c)) < 0) {
+			printk(KERN_ERR
+			       "i2c-mpc - failed to attach interrupt\n");
+			goto fail_irq;
+		}
+	}
+	dev_set_drvdata(device, i2c);
+
+	i2c->adap = mpc8260_ops;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.dev.parent = &pdev->dev;
+	if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
+		printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
+		goto fail_add;
+	}
+
+	return result;
+
+  fail_add:
+	if (i2c->irq != 0)
+		free_irq(i2c->irq, NULL);
+  fail_irq:
+	kfree(i2c);
+	return result;
+};
+
+static int fsl_i2c_remove(struct device *device)
+{
+	struct mpc_i2c *i2c = dev_get_drvdata(device);
+
+	/* hier noich irgendwo das dpalloc wieder freigeben */
+	cpm_dpfree (i2c->data->dp_addr);
+
+	i2c_del_adapter(&i2c->adap);
+	dev_set_drvdata(device, NULL);
+
+	if (i2c->irq != 0)
+		free_irq(i2c->irq, i2c);
+
+	kfree(i2c);
+	return 0;
+};
+
+/* Structure for a device driver */
+static struct device_driver fsl_i2c_driver = {
+	.name = "fsl-cpm-i2c",
+	.bus = &platform_bus_type,
+	.probe = fsl_i2c_probe,
+	.remove = fsl_i2c_remove,
+};
+
+static int __init fsl_i2c_init(void)
+{
+	return driver_register(&fsl_i2c_driver);
+}
+
+static void __exit fsl_i2c_exit(void)
+{
+	driver_unregister(&fsl_i2c_driver);
+}
+
+module_init(fsl_i2c_init);
+module_exit(fsl_i2c_exit);
+
+MODULE_AUTHOR("Heiko Schocher <hs@denx.de>");
+MODULE_DESCRIPTION
+    ("I2C-Bus adapter for MPC8260 processors");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/i2c-algo-8260.h b/include/linux/i2c-algo-8260.h
new file mode 100644
index 0000000..73b3e33
--- /dev/null
+++ b/include/linux/i2c-algo-8260.h
@@ -0,0 +1,26 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-8260.h i2c driver algorithms for MPX8260 CPM		     */
+/* ------------------------------------------------------------------------- */
+
+/* $Id$ */
+
+#ifndef I2C_ALGO_8260_H
+#define I2C_ALGO_8260_H 1
+
+#include <linux/i2c.h>
+
+struct i2c_algo_8260_data {
+	uint dp_addr;
+	int reloc;
+	volatile i2c_cpm2_t *i2c;
+	volatile iic_t	*iip;
+	volatile cpm_cpm2_t *cp;
+
+	int	(*setisr) (int irq,
+			   void (*func)(int, void (*)(void *), void *),
+			   void *data);
+
+	u_char	temp[513];
+};
+
+#endif /* I2C_ALGO_8260_H */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 1543daa..35b0a57 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -223,6 +223,9 @@
 /* --- PowerPC on-chip adapters						*/
 #define I2C_HW_OCP		0x120000 /* IBM on-chip I2C adapter */

+/* --- MPC8260 PowerPC adapters					*/
+#define I2C_HW_MPC8260    	0x100002 /* MPC8260 I2C adapter */
+
 /* --- Broadcom SiByte adapters						*/
 #define I2C_HW_SIBYTE		0x150000



\f
!-------------------------------------------------------------flip-



Signed-off-by: Heiko Schocher <hs@denx.de>

^ permalink raw reply related	[flat|nested] 7+ messages in thread