From: "Mark A. Greer" <mgreer@mvista.com>
To: linuxppc-dev <Linuxppc-dev@ozlabs.org>
Subject: [PATCH v2 1/2] powerpc: prpmc2800 - Add MTD support
Date: Thu, 25 Oct 2007 19:19:15 -0700 [thread overview]
Message-ID: <20071026021915.GA2035@mag.az.mvista.com> (raw)
In-Reply-To: <20071025233948.GA22703@mag.az.mvista.com>
From: Mark A. Greer <mgreer@mvista.com>
Create necessary device nodes so that the MTD subsystem recognizes
the MTD entries in the prpmc2800's DTS file. Also bring MTD section
of the prpmc2800's DTS file up to the current DTS specification.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
---
With Stephen's comments addressed. Much nicer. Thanks again, Stephen.
arch/powerpc/boot/dts/prpmc2800.dts | 39 +++++++++++----
arch/powerpc/platforms/embedded6xx/prpmc2800.c | 12 ++++
2 files changed, 41 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts
index 297dfa5..24944ca 100644
--- a/arch/powerpc/boot/dts/prpmc2800.dts
+++ b/arch/powerpc/boot/dts/prpmc2800.dts
@@ -55,17 +55,36 @@
f2000000 f2000000 00040000>; /* Integrated SRAM */
flash@a0000000 {
- device_type = "rom";
- compatible = "direct-mapped";
- reg = <a0000000 4000000>; /* Default (64MB) */
- probe-type = "CFI";
+ compatible = "cfi-flash";
+ reg = <a0000000 04000000>;
bank-width = <4>;
- partitions = <00000000 00100000 /* RO */
- 00100000 00040001 /* RW */
- 00140000 00400000 /* RO */
- 00540000 039c0000 /* RO */
- 03f00000 00100000>; /* RO */
- partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ fw@0 {
+ label = "FW Image A";
+ reg = <00000000 00100000>;
+ read-only;
+ };
+ cfg@100000 {
+ label = "FW Config Data"; /* RW */
+ reg = <00100000 00040000>;
+ };
+ kernel@140000 {
+ label = "Kernel Image";
+ reg = <00140000 00400000>;
+ read-only;
+ };
+ fs@540000 {
+ label = "Filesystem";
+ reg = <00540000 039c0000>;
+ read-only;
+ };
+ fw@3f00000 {
+ label = "FW Image B";
+ reg = <03f00000 00100000>;
+ read-only;
+ };
};
mdio {
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
index e484cac..2506f38 100644
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/seq_file.h>
+#include <linux/of_platform.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -68,6 +69,17 @@ static void __init prpmc2800_setup_arch(void)
printk("Motorola %s\n", prpmc2800_platform_name);
}
+static int __init prpmc2800_register_mtd(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "cfi-flash")
+ of_platform_device_create(np, NULL, NULL);
+
+ return 0;
+}
+device_initcall(prpmc2800_register_mtd);
+
static void prpmc2800_reset_board(void)
{
u32 temp;
prev parent reply other threads:[~2007-10-26 2:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-25 23:39 [PATCH 1/2] powerpc: prpmc2800 - Add MTD support Mark A. Greer
2007-10-25 23:42 ` [PATCH 2/2] powerpc: prpmc2800 - Don't overwrite user FLASH size Mark A. Greer
2007-10-26 0:23 ` [PATCH 1/2] powerpc: prpmc2800 - Add MTD support Stephen Rothwell
2007-10-26 1:06 ` Mark A. Greer
2007-10-26 2:19 ` Mark A. Greer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071026021915.GA2035@mag.az.mvista.com \
--to=mgreer@mvista.com \
--cc=Linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox