[PATCH] powerpc: mpc832x mds: Fix board PHY reset code

[Kim Phillips <kim.phillips@freescale.com>]

currently the board-level PHY reset code for the mpc832x MDS messes with
reset configuration words source settings which is plain wrong (it
looks like this board code was cut-n-pasted from the mpc8360 mds code,
which has the PHY reset bits in a different BCSR); this patch points
the PHY reset code to the proper mpc832x mds PHY reset bits in the BCSR.

Signed-off-by: Peter Van Ackeren <peter.vanackeren@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
 arch/powerpc/platforms/83xx/mpc832x_mds.c |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 972fa85..9e3bfcc 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -90,10 +90,11 @@ static void __init mpc832x_sys_setup_arch(void)
 
 	if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
 			!= NULL){
-		/* Reset the Ethernet PHY */
-		bcsr_regs[9] &= ~0x20;
+		/* Reset the Ethernet PHYs */
+#define BCSR8_FETH_RST 0x50
+		bcsr_regs[8] &= ~BCSR8_FETH_RST;
 		udelay(1000);
-		bcsr_regs[9] |= 0x20;
+		bcsr_regs[8] |= BCSR8_FETH_RST;
 		iounmap(bcsr_regs);
 		of_node_put(np);
 	}
-- 
1.5.2.2