* The question about the u-boot on intel ixp460?
@ 2009-05-15 1:43 guojin02
0 siblings, 0 replies; only message in thread
From: guojin02 @ 2009-05-15 1:43 UTC (permalink / raw)
To: linuxppc-embedded; +Cc: linuxppc-dev, wd, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 888 bytes --]
Hi, friends,
I move the u-boot patched from http://www.evidence.eu.com/content/view/104/169/ to my IXP460 board. There are some difference between ixdp465 board and my ixp460 board. The cpu part number is different, my ixp460 board have 128MB ddr memory(MT46V32M16-6T ), and 16MB flash (JS28F128J3D75), but the ixdp465 have 64MB ddr (MT46V16M16-6T) and 32MB flash(RC28F256J3C125). I am sure that the UART selected by me is right. I did not change any code from evidence, I used the arm-linux-tools-20061213, the build is success. then I used the BintoS19 convert u-boot.bin to S19 style, write to the flash by OCDemon flash memory programmer. but my ixp460 board had no any response from serial interface, my ixp460 board can work normally with REDBOOT, so the hardware have no problem. Could you tell me why? Thanks.
2009-05-15
郭 劲
13810607876
010-62771694
[-- Attachment #2: Type: text/html, Size: 2024 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-05-15 1:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-05-15 1:43 The question about the u-boot on intel ixp460? guojin02
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox