* [PATCH 2/2] eSPI: fix wrong setting of the address in the command buffer
@ 2010-12-21 1:27 Mingkai Hu
2010-12-24 8:55 ` Grant Likely
0 siblings, 1 reply; 2+ messages in thread
From: Mingkai Hu @ 2010-12-21 1:27 UTC (permalink / raw)
To: linuxppc-dev, spi-devel-general; +Cc: kumar.gala, Mingkai Hu
Or else we cann't operate on the right address when the trans length
is greater than 65535.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
---
drivers/spi/spi_fsl_espi.c | 16 +++++++++-------
1 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c
index ae78926..a99e233 100644
--- a/drivers/spi/spi_fsl_espi.c
+++ b/drivers/spi/spi_fsl_espi.c
@@ -258,18 +258,18 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
return mpc8xxx_spi->count;
}
-static void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
+static inline void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
{
- if (cmd[1] && cmd[2] && cmd[3]) {
+ if (cmd) {
cmd[1] = (u8)(addr >> 16);
cmd[2] = (u8)(addr >> 8);
cmd[3] = (u8)(addr >> 0);
}
}
-static unsigned int fsl_espi_cmd2addr(u8 *cmd)
+static inline unsigned int fsl_espi_cmd2addr(u8 *cmd)
{
- if (cmd[1] && cmd[2] && cmd[3])
+ if (cmd)
return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0;
return 0;
@@ -395,9 +395,11 @@ static void fsl_espi_rw_trans(struct spi_message *m,
}
}
- addr = fsl_espi_cmd2addr(local_buf);
- addr += pos;
- fsl_espi_addr2cmd(addr, local_buf);
+ if (pos > 0) {
+ addr = fsl_espi_cmd2addr(local_buf);
+ addr += pos;
+ fsl_espi_addr2cmd(addr, local_buf);
+ }
espi_trans->n_tx = n_tx;
espi_trans->n_rx = trans_len;
--
1.6.4
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH 2/2] eSPI: fix wrong setting of the address in the command buffer
2010-12-21 1:27 [PATCH 2/2] eSPI: fix wrong setting of the address in the command buffer Mingkai Hu
@ 2010-12-24 8:55 ` Grant Likely
0 siblings, 0 replies; 2+ messages in thread
From: Grant Likely @ 2010-12-24 8:55 UTC (permalink / raw)
To: Mingkai Hu; +Cc: linuxppc-dev, kumar.gala, spi-devel-general
On Tue, Dec 21, 2010 at 09:27:02AM +0800, Mingkai Hu wrote:
> Or else we cann't operate on the right address when the trans length
> is greater than 65535.
>
> Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Applied to merge branch for 2.6.27, thanks.
g.
> ---
> drivers/spi/spi_fsl_espi.c | 16 +++++++++-------
> 1 files changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c
> index ae78926..a99e233 100644
> --- a/drivers/spi/spi_fsl_espi.c
> +++ b/drivers/spi/spi_fsl_espi.c
> @@ -258,18 +258,18 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
> return mpc8xxx_spi->count;
> }
>
> -static void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
> +static inline void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
> {
> - if (cmd[1] && cmd[2] && cmd[3]) {
> + if (cmd) {
> cmd[1] = (u8)(addr >> 16);
> cmd[2] = (u8)(addr >> 8);
> cmd[3] = (u8)(addr >> 0);
> }
> }
>
> -static unsigned int fsl_espi_cmd2addr(u8 *cmd)
> +static inline unsigned int fsl_espi_cmd2addr(u8 *cmd)
> {
> - if (cmd[1] && cmd[2] && cmd[3])
> + if (cmd)
> return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0;
>
> return 0;
> @@ -395,9 +395,11 @@ static void fsl_espi_rw_trans(struct spi_message *m,
> }
> }
>
> - addr = fsl_espi_cmd2addr(local_buf);
> - addr += pos;
> - fsl_espi_addr2cmd(addr, local_buf);
> + if (pos > 0) {
> + addr = fsl_espi_cmd2addr(local_buf);
> + addr += pos;
> + fsl_espi_addr2cmd(addr, local_buf);
> + }
>
> espi_trans->n_tx = n_tx;
> espi_trans->n_rx = trans_len;
> --
> 1.6.4
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-12-24 8:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-12-21 1:27 [PATCH 2/2] eSPI: fix wrong setting of the address in the command buffer Mingkai Hu
2010-12-24 8:55 ` Grant Likely
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox