[PATCH v4.1 backport 00/15] powerpc stable backports for v4.1

[PATCH v4.1 backport 00/15] powerpc stable backports for v4.1

[Michael Ellerman]

Hi Sasha,

This is a backport to v4.1 of the RFI flush series that went upstream recently.
There's also a few other commits I noticed had not made it to v4.1.

cheers

[PATCH v4.1 backport 01/15] powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper

[Michael Ellerman]

From: Michael Neuling <mikey@neuling.org>

commit 191eccb1580939fb0d47deb405b82a85b0379070 upstream.

A new hypervisor call has been defined to communicate various
characteristics of the CPU to guests. Add definitions for the hcall
number, flags and a wrapper function.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[Balbir fixed conflicts in backport]
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/include/asm/hvcall.h         | 17 +++++++++++++++++
 arch/powerpc/include/asm/plpar_wrappers.h | 14 ++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 85bc8c0d257b..51adbde09845 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -239,6 +239,7 @@
 #define H_GET_HCA_INFO          0x1B8
 #define H_GET_PERF_COUNT        0x1BC
 #define H_MANAGE_TRACE          0x1C0
+#define H_GET_CPU_CHARACTERISTICS 0x1C8
 #define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
 #define H_QUERY_INT_STATE       0x1E4
 #define H_POLL_PENDING		0x1D8
@@ -285,6 +286,17 @@
 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE	3
 #define H_SET_MODE_RESOURCE_LE			4
 
+/* H_GET_CPU_CHARACTERISTICS return values */
+#define H_CPU_CHAR_SPEC_BAR_ORI31	(1ull << 63) // IBM bit 0
+#define H_CPU_CHAR_BCCTRL_SERIALISED	(1ull << 62) // IBM bit 1
+#define H_CPU_CHAR_L1D_FLUSH_ORI30	(1ull << 61) // IBM bit 2
+#define H_CPU_CHAR_L1D_FLUSH_TRIG2	(1ull << 60) // IBM bit 3
+#define H_CPU_CHAR_L1D_THREAD_PRIV	(1ull << 59) // IBM bit 4
+
+#define H_CPU_BEHAV_FAVOUR_SECURITY	(1ull << 63) // IBM bit 0
+#define H_CPU_BEHAV_L1D_FLUSH_PR	(1ull << 62) // IBM bit 1
+#define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR	(1ull << 61) // IBM bit 2
+
 #ifndef __ASSEMBLY__
 
 /**
@@ -423,6 +435,11 @@ extern long pseries_big_endian_exceptions(void);
 
 #endif /* CONFIG_PPC_PSERIES */
 
+struct h_cpu_char_result {
+	u64 character;
+	u64 behaviour;
+};
+
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 67859edbf8fd..6e05cb397a5c 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -323,4 +323,18 @@ static inline long plapr_set_watchpoint0(unsigned long dawr0, unsigned long dawr
 	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR, dawr0, dawrx0);
 }
 
+static inline long plpar_get_cpu_characteristics(struct h_cpu_char_result *p)
+{
+	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+	long rc;
+
+	rc = plpar_hcall(H_GET_CPU_CHARACTERISTICS, retbuf);
+	if (rc == H_SUCCESS) {
+		p->character = retbuf[0];
+		p->behaviour = retbuf[1];
+	}
+
+	return rc;
+}
+
 #endif /* _ASM_POWERPC_PLPAR_WRAPPERS_H */
-- 
2.14.1

[PATCH v4.1 backport 02/15] powerpc/64: Add macros for annotating the destination of rfid/hrfid

[Michael Ellerman]

From: Nicholas Piggin <npiggin@gmail.com>

commit 50e51c13b3822d14ff6df4279423e4b7b2269bc3 upstream.

The rfid/hrfid ((Hypervisor) Return From Interrupt) instruction is
used for switching from the kernel to userspace, and from the
hypervisor to the guest kernel. However it can and is also used for
other transitions, eg. from real mode kernel code to virtual mode
kernel code, and it's not always clear from the code what the
destination context is.

To make it clearer when reading the code, add macros which encode the
expected destination context.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/include/asm/exception-64e.h |  6 ++++++
 arch/powerpc/include/asm/exception-64s.h | 29 +++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index a8b52b61043f..bd8958445336 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -208,5 +208,11 @@ exc_##label##_book3e:
 	ori	r3,r3,interrupt_base_book3e@l;	\
 	mtspr	SPRN_IVOR##vector_number,r3;
 
+#define RFI_TO_KERNEL							\
+	rfi
+
+#define RFI_TO_USER							\
+	rfi
+
 #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
 
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 77f52b26dad6..c8c8a81e3976 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -50,6 +50,35 @@
 #define EX_PPR		88	/* SMT thread status register (priority) */
 #define EX_CTR		96
 
+/* Macros for annotating the expected destination of (h)rfid */
+
+#define RFI_TO_KERNEL							\
+	rfid
+
+#define RFI_TO_USER							\
+	rfid
+
+#define RFI_TO_USER_OR_KERNEL						\
+	rfid
+
+#define RFI_TO_GUEST							\
+	rfid
+
+#define HRFI_TO_KERNEL							\
+	hrfid
+
+#define HRFI_TO_USER							\
+	hrfid
+
+#define HRFI_TO_USER_OR_KERNEL						\
+	hrfid
+
+#define HRFI_TO_GUEST							\
+	hrfid
+
+#define HRFI_TO_UNKNOWN							\
+	hrfid
+
 #ifdef CONFIG_RELOCATABLE
 #define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)			\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
-- 
2.14.1

[PATCH v4.1 backport 03/15] powerpc/64s: Simple RFI macro conversions

[Michael Ellerman]

From: Nicholas Piggin <npiggin@gmail.com>

commit 222f20f140623ef6033491d0103ee0875fe87d35 upstream.

This commit does simple conversions of rfi/rfid to the new macros that
include the expected destination context. By simple we mean cases
where there is a single well known destination context, and it's
simply a matter of substituting the instruction for the appropriate
macro.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[Balbir fixed issues with backporting to stable]
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/include/asm/exception-64s.h |  2 +-
 arch/powerpc/kernel/entry_64.S           | 11 ++++++++---
 arch/powerpc/kernel/exceptions-64s.S     | 18 +++++++++---------
 arch/powerpc/kvm/book3s_hv_rmhandlers.S  |  7 +++----
 arch/powerpc/kvm/book3s_rmhandlers.S     |  7 +++++--
 arch/powerpc/kvm/book3s_segment.S        |  4 ++--
 6 files changed, 28 insertions(+), 21 deletions(-)

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index c8c8a81e3976..6dfb6e928f81 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -220,7 +220,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 	mtspr	SPRN_##h##SRR0,r12;					\
 	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
 	mtspr	SPRN_##h##SRR1,r10;					\
-	h##rfid;							\
+	h##RFI_TO_KERNEL;						\
 	b	.	/* prevent speculative execution */
 #define EXCEPTION_PROLOG_PSERIES_1(label, h)				\
 	__EXCEPTION_PROLOG_PSERIES_1(label, h)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index de276553cc79..e3bb07c78cee 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -34,6 +34,11 @@
 #include <asm/ftrace.h>
 #include <asm/hw_irq.h>
 #include <asm/context_tracking.h>
+#ifdef CONFIG_PPC_BOOK3S
+#include <asm/exception-64s.h>
+#else
+#include <asm/exception-64e.h>
+#endif
 
 /*
  * System calls.
@@ -1030,7 +1035,7 @@ _GLOBAL(enter_rtas)
 	
 	mtspr	SPRN_SRR0,r5
 	mtspr	SPRN_SRR1,r6
-	rfid
+	RFI_TO_KERNEL
 	b	.	/* prevent speculative execution */
 
 rtas_return_loc:
@@ -1055,7 +1060,7 @@ rtas_return_loc:
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
-	rfid
+	RFI_TO_KERNEL
 	b	.	/* prevent speculative execution */
 
 	.align	3
@@ -1126,7 +1131,7 @@ _GLOBAL(enter_prom)
 	LOAD_REG_IMMEDIATE(r12, MSR_SF | MSR_ISF | MSR_LE)
 	andc	r11,r11,r12
 	mtsrr1	r11
-	rfid
+	RFI_TO_KERNEL
 #endif /* CONFIG_PPC_BOOK3E */
 
 1:	/* Return from OF */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 7662bfae0493..591efc03f80d 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -46,7 +46,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)				\
 	mtspr	SPRN_SRR0,r10 ; 				\
 	ld	r10,PACAKMSR(r13) ;				\
 	mtspr	SPRN_SRR1,r10 ; 				\
-	rfid ; 							\
+	RFI_TO_KERNEL ; 							\
 	b	. ;	/* prevent speculative execution */
 
 #define SYSCALL_PSERIES_3					\
@@ -54,7 +54,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)				\
 1:	mfspr	r12,SPRN_SRR1 ;					\
 	xori	r12,r12,MSR_LE ;				\
 	mtspr	SPRN_SRR1,r12 ;					\
-	rfid ;		/* return to userspace */		\
+	RFI_TO_USER ;		/* return to userspace */		\
 	b	. ;	/* prevent speculative execution */
 
 #if defined(CONFIG_RELOCATABLE)
@@ -508,7 +508,7 @@ BEGIN_FTR_SECTION
 	LOAD_HANDLER(r12, machine_check_handle_early)
 1:	mtspr	SPRN_SRR0,r12
 	mtspr	SPRN_SRR1,r11
-	rfid
+	RFI_TO_KERNEL
 	b	.	/* prevent speculative execution */
 2:
 	/* Stack overflow. Stay on emergency stack and panic.
@@ -602,7 +602,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	ld	r11,PACA_EXGEN+EX_R11(r13)
 	ld	r12,PACA_EXGEN+EX_R12(r13)
 	ld	r13,PACA_EXGEN+EX_R13(r13)
-	HRFID
+	HRFI_TO_UNKNOWN
 	b	.
 #endif
 
@@ -667,7 +667,7 @@ masked_##_H##interrupt:					\
 	ld	r10,PACA_EXGEN+EX_R10(r13);		\
 	ld	r11,PACA_EXGEN+EX_R11(r13);		\
 	GET_SCRATCH0(r13);				\
-	##_H##rfid;					\
+	##_H##RFI_TO_KERNEL;				\
 	b	.
 	
 	MASKED_INTERRUPT()
@@ -757,7 +757,7 @@ kvmppc_skip_interrupt:
 	addi	r13, r13, 4
 	mtspr	SPRN_SRR0, r13
 	GET_SCRATCH0(r13)
-	rfid
+	RFI_TO_KERNEL
 	b	.
 
 kvmppc_skip_Hinterrupt:
@@ -769,7 +769,7 @@ kvmppc_skip_Hinterrupt:
 	addi	r13, r13, 4
 	mtspr	SPRN_HSRR0, r13
 	GET_SCRATCH0(r13)
-	hrfid
+	HRFI_TO_KERNEL
 	b	.
 #endif
 
@@ -1447,7 +1447,7 @@ machine_check_handle_early:
 	li	r3,MSR_ME
 	andc	r10,r10,r3		/* Turn off MSR_ME */
 	mtspr	SPRN_SRR1,r10
-	rfid
+	RFI_TO_KERNEL
 	b	.
 2:
 	/*
@@ -1465,7 +1465,7 @@ machine_check_handle_early:
 	 */
 	bl	machine_check_queue_event
 	MACHINE_CHECK_HANDLER_WINDUP
-	rfid
+	RFI_TO_USER_OR_KERNEL
 9:
 	/* Deliver the machine check to host kernel in V mode. */
 	MACHINE_CHECK_HANDLER_WINDUP
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index a3018f109cd3..a7bd4100f158 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -64,7 +64,7 @@ _GLOBAL_TOC(kvmppc_hv_entry_trampoline)
 	mtmsrd	r0,1		/* clear RI in MSR */
 	mtsrr0	r5
 	mtsrr1	r6
-	RFI
+	RFI_TO_KERNEL
 
 kvmppc_call_hv_entry:
 	ld	r4, HSTATE_KVM_VCPU(r13)
@@ -164,7 +164,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 	mtsrr0	r8
 	mtsrr1	r7
 	beq	cr1, 13f		/* machine check */
-	RFI
+	RFI_TO_KERNEL
 
 	/* On POWER7, we have external interrupts set to use HSRR0/1 */
 11:	mtspr	SPRN_HSRR0, r8
@@ -877,8 +877,7 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	ld	r0, VCPU_GPR(R0)(r4)
 	ld	r4, VCPU_GPR(R4)(r4)
-
-	hrfid
+	HRFI_TO_GUEST
 	b	.
 
 secondary_too_late:
diff --git a/arch/powerpc/kvm/book3s_rmhandlers.S b/arch/powerpc/kvm/book3s_rmhandlers.S
index 16c4d88ba27d..a328f99a887c 100644
--- a/arch/powerpc/kvm/book3s_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_rmhandlers.S
@@ -46,6 +46,9 @@
 
 #define FUNC(name)		name
 
+#define RFI_TO_KERNEL	RFI
+#define RFI_TO_GUEST	RFI
+
 .macro INTERRUPT_TRAMPOLINE intno
 
 .global kvmppc_trampoline_\intno
@@ -141,7 +144,7 @@ kvmppc_handler_skip_ins:
 	GET_SCRATCH0(r13)
 
 	/* And get back into the code */
-	RFI
+	RFI_TO_KERNEL
 #endif
 
 /*
@@ -164,6 +167,6 @@ _GLOBAL_TOC(kvmppc_entry_trampoline)
 	ori	r5, r5, MSR_EE
 	mtsrr0	r7
 	mtsrr1	r6
-	RFI
+	RFI_TO_KERNEL
 
 #include "book3s_segment.S"
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S
index acee37cde840..af3a91c00b46 100644
--- a/arch/powerpc/kvm/book3s_segment.S
+++ b/arch/powerpc/kvm/book3s_segment.S
@@ -156,7 +156,7 @@ no_dcbz32_on:
 	PPC_LL	r9, SVCPU_R9(r3)
 	PPC_LL	r3, (SVCPU_R3)(r3)
 
-	RFI
+	RFI_TO_GUEST
 kvmppc_handler_trampoline_enter_end:
 
 
@@ -389,5 +389,5 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	cmpwi	r12, BOOK3S_INTERRUPT_DOORBELL
 	beqa	BOOK3S_INTERRUPT_DOORBELL
 
-	RFI
+	RFI_TO_KERNEL
 kvmppc_handler_trampoline_exit_end:
-- 
2.14.1

[PATCH v4.1 backport 04/15] powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL

[Michael Ellerman]

From: Nicholas Piggin <npiggin@gmail.com>

commit a08f828cf47e6c605af21d2cdec68f84e799c318 upstream.

Similar to the syscall return path, in fast_exception_return we may be
returning to user or kernel context. We already have a test for that,
because we conditionally restore r13. So use that existing test and
branch, and bifurcate the return based on that.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/entry_64.S | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index e3bb07c78cee..f7421248cbd8 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -845,7 +845,7 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	ACCOUNT_CPU_USER_EXIT(r2, r4)
 	REST_GPR(13, r1)
-1:
+
 	mtspr	SPRN_SRR1,r3
 
 	ld	r2,_CCR(r1)
@@ -858,8 +858,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	ld	r3,GPR3(r1)
 	ld	r4,GPR4(r1)
 	ld	r1,GPR1(r1)
+	RFI_TO_USER
+	b	.	/* prevent speculative execution */
+
+1:	mtspr	SPRN_SRR1,r3
 
-	rfid
+	ld	r2,_CCR(r1)
+	mtcrf	0xFF,r2
+	ld	r2,_NIP(r1)
+	mtspr	SPRN_SRR0,r2
+
+	ld	r0,GPR0(r1)
+	ld	r2,GPR2(r1)
+	ld	r3,GPR3(r1)
+	ld	r4,GPR4(r1)
+	ld	r1,GPR1(r1)
+	RFI_TO_KERNEL
 	b	.	/* prevent speculative execution */
 
 #endif /* CONFIG_PPC_BOOK3E */
-- 
2.14.1

[PATCH v4.1 backport 05/15] powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL

[Michael Ellerman]

From: Nicholas Piggin <npiggin@gmail.com>

commit b8e90cb7bc04a509e821e82ab6ed7a8ef11ba333 upstream.

In the syscall exit path we may be returning to user or kernel
context. We already have a test for that, because we conditionally
restore r13. So use that existing test and branch, and bifurcate the
return based on that.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/entry_64.S | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index f7421248cbd8..36a8bf3d053b 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -223,13 +223,23 @@ END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
 	ACCOUNT_CPU_USER_EXIT(r11, r12)
 	HMT_MEDIUM_LOW_HAS_PPR
 	ld	r13,GPR13(r1)	/* only restore r13 if returning to usermode */
+	ld	r2,GPR2(r1)
+	ld	r1,GPR1(r1)
+	mtlr	r4
+	mtcr	r5
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r8
+	RFI_TO_USER
+	b	.	/* prevent speculative execution */
+
+	/* exit to kernel */
 1:	ld	r2,GPR2(r1)
 	ld	r1,GPR1(r1)
 	mtlr	r4
 	mtcr	r5
 	mtspr	SPRN_SRR0,r7
 	mtspr	SPRN_SRR1,r8
-	RFI
+	RFI_TO_KERNEL
 	b	.	/* prevent speculative execution */
 
 syscall_error:	
-- 
2.14.1

[PATCH v4.1 backport 06/15] powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL

[Michael Ellerman]

From: Nicholas Piggin <npiggin@gmail.com>

commit c7305645eb0c1621351cfc104038831ae87c0053 upstream.

In the SLB miss handler we may be returning to user or kernel. We need
to add a check early on and save the result in the cr4 register, and
then we bifurcate the return path based on that.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Backport to 4.4 based on patch from Balbir]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 591efc03f80d..c7dfd67c14da 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1511,6 +1511,8 @@ slb_miss_realmode:
 
 	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
 	beq-	2f
+	andi.	r10,r12,MSR_PR	/* check for user mode (PR != 0) */
+	bne	1f
 
 .machine	push
 .machine	"power4"
@@ -1524,7 +1526,23 @@ slb_miss_realmode:
 	ld	r11,PACA_EXSLB+EX_R11(r13)
 	ld	r12,PACA_EXSLB+EX_R12(r13)
 	ld	r13,PACA_EXSLB+EX_R13(r13)
-	rfid
+	RFI_TO_KERNEL
+	b	.	/* prevent speculative execution */
+
+1:
+.machine	push
+.machine	"power4"
+	mtcrf	0x80,r9
+	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
+.machine	pop
+
+	RESTORE_PPR_PACA(PACA_EXSLB, r9)
+	ld	r9,PACA_EXSLB+EX_R9(r13)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	ld	r11,PACA_EXSLB+EX_R11(r13)
+	ld	r12,PACA_EXSLB+EX_R12(r13)
+	ld	r13,PACA_EXSLB+EX_R13(r13)
+	RFI_TO_USER
 	b	.	/* prevent speculative execution */
 
 2:	mfspr	r11,SPRN_SRR0
@@ -1533,7 +1551,7 @@ slb_miss_realmode:
 	mtspr	SPRN_SRR0,r10
 	ld	r10,PACAKMSR(r13)
 	mtspr	SPRN_SRR1,r10
-	rfid
+	RFI_TO_KERNEL
 	b	.
 
 unrecov_slb:
-- 
2.14.1

[PATCH v4.1 backport 07/15] powerpc/64s: Add support for RFI flush of L1-D cache

[Michael Ellerman]

commit aa8a5e0062ac940f7659394f4817c948dc8c0667 upstream.

On some CPUs we can prevent the Meltdown vulnerability by flushing the
L1-D cache on exit from kernel to user mode, and from hypervisor to
guest.

This is known to be the case on at least Power7, Power8 and Power9. At
this time we do not know the status of the vulnerability on other CPUs
such as the 970 (Apple G5), pasemi CPUs (AmigaOne X1000) or Freescale
CPUs. As more information comes to light we can enable this, or other
mechanisms on those CPUs.

The vulnerability occurs when the load of an architecturally
inaccessible memory region (eg. userspace load of kernel memory) is
speculatively executed to the point where its result can influence the
address of a subsequent speculatively executed load.

In order for that to happen, the first load must hit in the L1,
because before the load is sent to the L2 the permission check is
performed. Therefore if no kernel addresses hit in the L1 the
vulnerability can not occur. We can ensure that is the case by
flushing the L1 whenever we return to userspace. Similarly for
hypervisor vs guest.

In order to flush the L1-D cache on exit, we add a section of nops at
each (h)rfi location that returns to a lower privileged context, and
patch that with some sequence. Newer firmwares are able to advertise
to us that there is a special nop instruction that flushes the L1-D.
If we do not see that advertised, we fall back to doing a displacement
flush in software.

For guest kernels we support migration between some CPU versions, and
different CPUs may use different flush instructions. So that we are
prepared to migrate to a machine with a different flush instruction
activated, we may have to patch more than one flush instruction at
boot if the hypervisor tells us to.

In the end this patch is mostly the work of Nicholas Piggin and
Michael Ellerman. However a cast of thousands contributed to analysis
of the issue, earlier versions of the patch, back ports testing etc.
Many thanks to all of them.

Tested-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[Balbir - back ported to stable with changes]
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/include/asm/exception-64s.h  | 40 +++++++++++---
 arch/powerpc/include/asm/feature-fixups.h | 15 ++++++
 arch/powerpc/include/asm/paca.h           | 10 ++++
 arch/powerpc/include/asm/setup.h          | 13 +++++
 arch/powerpc/kernel/asm-offsets.c         |  4 ++
 arch/powerpc/kernel/exceptions-64s.S      | 86 +++++++++++++++++++++++++++++++
 arch/powerpc/kernel/setup_64.c            | 79 ++++++++++++++++++++++++++++
 arch/powerpc/kernel/vmlinux.lds.S         |  9 ++++
 arch/powerpc/lib/feature-fixups.c         | 42 +++++++++++++++
 9 files changed, 290 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 6dfb6e928f81..9bddbec441b8 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -50,34 +50,58 @@
 #define EX_PPR		88	/* SMT thread status register (priority) */
 #define EX_CTR		96
 
-/* Macros for annotating the expected destination of (h)rfid */
+/*
+ * Macros for annotating the expected destination of (h)rfid
+ *
+ * The nop instructions allow us to insert one or more instructions to flush the
+ * L1-D cache when returning to userspace or a guest.
+ */
+#define RFI_FLUSH_SLOT							\
+	RFI_FLUSH_FIXUP_SECTION;					\
+	nop;								\
+	nop;								\
+	nop
 
 #define RFI_TO_KERNEL							\
 	rfid
 
 #define RFI_TO_USER							\
-	rfid
+	RFI_FLUSH_SLOT;							\
+	rfid;								\
+	b	rfi_flush_fallback
 
 #define RFI_TO_USER_OR_KERNEL						\
-	rfid
+	RFI_FLUSH_SLOT;							\
+	rfid;								\
+	b	rfi_flush_fallback
 
 #define RFI_TO_GUEST							\
-	rfid
+	RFI_FLUSH_SLOT;							\
+	rfid;								\
+	b	rfi_flush_fallback
 
 #define HRFI_TO_KERNEL							\
 	hrfid
 
 #define HRFI_TO_USER							\
-	hrfid
+	RFI_FLUSH_SLOT;							\
+	hrfid;								\
+	b	hrfi_flush_fallback
 
 #define HRFI_TO_USER_OR_KERNEL						\
-	hrfid
+	RFI_FLUSH_SLOT;							\
+	hrfid;								\
+	b	hrfi_flush_fallback
 
 #define HRFI_TO_GUEST							\
-	hrfid
+	RFI_FLUSH_SLOT;							\
+	hrfid;								\
+	b	hrfi_flush_fallback
 
 #define HRFI_TO_UNKNOWN							\
-	hrfid
+	RFI_FLUSH_SLOT;							\
+	hrfid;								\
+	b	hrfi_flush_fallback
 
 #ifdef CONFIG_RELOCATABLE
 #define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)			\
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index 9a67a38bf7b9..7068bafbb2d6 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -184,4 +184,19 @@ label##3:					       	\
 	FTR_ENTRY_OFFSET label##1b-label##3b;		\
 	.popsection;
 
+#define RFI_FLUSH_FIXUP_SECTION				\
+951:							\
+	.pushsection __rfi_flush_fixup,"a";		\
+	.align 2;					\
+952:							\
+	FTR_ENTRY_OFFSET 951b-952b;			\
+	.popsection;
+
+
+#ifndef __ASSEMBLY__
+
+extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
+
+#endif
+
 #endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 70bd4381f8e6..45e2aefece16 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -192,6 +192,16 @@ struct paca_struct {
 #endif
 	struct kvmppc_host_state kvm_hstate;
 #endif
+#ifdef CONFIG_PPC_BOOK3S_64
+	/*
+	 * rfi fallback flush must be in its own cacheline to prevent
+	 * other paca data leaking into the L1d
+	 */
+	u64 exrfi[13] __aligned(0x80);
+	void *rfi_flush_fallback_area;
+	u64 l1d_flush_congruence;
+	u64 l1d_flush_sets;
+#endif
 };
 
 extern struct paca_struct *paca;
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index e9d384cbd021..7916b56f2e60 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -26,6 +26,19 @@ void initmem_init(void);
 void setup_panic(void);
 #define ARCH_PANIC_TIMEOUT 180
 
+void rfi_flush_enable(bool enable);
+
+/* These are bit flags */
+enum l1d_flush_type {
+	L1D_FLUSH_NONE		= 0x1,
+	L1D_FLUSH_FALLBACK	= 0x2,
+	L1D_FLUSH_ORI		= 0x4,
+	L1D_FLUSH_MTTRIG	= 0x8,
+};
+
+void __init setup_rfi_flush(enum l1d_flush_type, bool enable);
+void do_rfi_flush_fixups(enum l1d_flush_type types);
+
 #endif /* !__ASSEMBLY__ */
 
 #endif	/* _ASM_POWERPC_SETUP_H */
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index d8d332e65078..69761d8ad871 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -244,6 +244,10 @@ int main(void)
 #ifdef CONFIG_PPC_BOOK3S_64
 	DEFINE(PACAMCEMERGSP, offsetof(struct paca_struct, mc_emergency_sp));
 	DEFINE(PACA_IN_MCE, offsetof(struct paca_struct, in_mce));
+	DEFINE(PACA_RFI_FLUSH_FALLBACK_AREA, offsetof(struct paca_struct, rfi_flush_fallback_area));
+	DEFINE(PACA_EXRFI, offsetof(struct paca_struct, exrfi));
+	DEFINE(PACA_L1D_FLUSH_CONGRUENCE, offsetof(struct paca_struct, l1d_flush_congruence));
+	DEFINE(PACA_L1D_FLUSH_SETS, offsetof(struct paca_struct, l1d_flush_sets));
 #endif
 	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
 	DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index c7dfd67c14da..9c102be8cd97 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1572,6 +1572,92 @@ power4_fixup_nap:
 	blr
 #endif
 
+	.globl rfi_flush_fallback
+rfi_flush_fallback:
+	SET_SCRATCH0(r13);
+	GET_PACA(r13);
+	std	r9,PACA_EXRFI+EX_R9(r13)
+	std	r10,PACA_EXRFI+EX_R10(r13)
+	std	r11,PACA_EXRFI+EX_R11(r13)
+	std	r12,PACA_EXRFI+EX_R12(r13)
+	std	r8,PACA_EXRFI+EX_R13(r13)
+	mfctr	r9
+	ld	r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
+	ld	r11,PACA_L1D_FLUSH_SETS(r13)
+	ld	r12,PACA_L1D_FLUSH_CONGRUENCE(r13)
+	/*
+	 * The load adresses are at staggered offsets within cachelines,
+	 * which suits some pipelines better (on others it should not
+	 * hurt).
+	 */
+	addi	r12,r12,8
+	mtctr	r11
+	DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
+
+	/* order ld/st prior to dcbt stop all streams with flushing */
+	sync
+1:	li	r8,0
+	.rept	8 /* 8-way set associative */
+	ldx	r11,r10,r8
+	add	r8,r8,r12
+	xor	r11,r11,r11	// Ensure r11 is 0 even if fallback area is not
+	add	r8,r8,r11	// Add 0, this creates a dependency on the ldx
+	.endr
+	addi	r10,r10,128 /* 128 byte cache line */
+	bdnz	1b
+
+	mtctr	r9
+	ld	r9,PACA_EXRFI+EX_R9(r13)
+	ld	r10,PACA_EXRFI+EX_R10(r13)
+	ld	r11,PACA_EXRFI+EX_R11(r13)
+	ld	r12,PACA_EXRFI+EX_R12(r13)
+	ld	r8,PACA_EXRFI+EX_R13(r13)
+	GET_SCRATCH0(r13);
+	rfid
+
+	.globl hrfi_flush_fallback
+hrfi_flush_fallback:
+	SET_SCRATCH0(r13);
+	GET_PACA(r13);
+	std	r9,PACA_EXRFI+EX_R9(r13)
+	std	r10,PACA_EXRFI+EX_R10(r13)
+	std	r11,PACA_EXRFI+EX_R11(r13)
+	std	r12,PACA_EXRFI+EX_R12(r13)
+	std	r8,PACA_EXRFI+EX_R13(r13)
+	mfctr	r9
+	ld	r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
+	ld	r11,PACA_L1D_FLUSH_SETS(r13)
+	ld	r12,PACA_L1D_FLUSH_CONGRUENCE(r13)
+	/*
+	 * The load adresses are at staggered offsets within cachelines,
+	 * which suits some pipelines better (on others it should not
+	 * hurt).
+	 */
+	addi	r12,r12,8
+	mtctr	r11
+	DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
+
+	/* order ld/st prior to dcbt stop all streams with flushing */
+	sync
+1:	li	r8,0
+	.rept	8 /* 8-way set associative */
+	ldx	r11,r10,r8
+	add	r8,r8,r12
+	xor	r11,r11,r11	// Ensure r11 is 0 even if fallback area is not
+	add	r8,r8,r11	// Add 0, this creates a dependency on the ldx
+	.endr
+	addi	r10,r10,128 /* 128 byte cache line */
+	bdnz	1b
+
+	mtctr	r9
+	ld	r9,PACA_EXRFI+EX_R9(r13)
+	ld	r10,PACA_EXRFI+EX_R10(r13)
+	ld	r11,PACA_EXRFI+EX_R11(r13)
+	ld	r12,PACA_EXRFI+EX_R12(r13)
+	ld	r8,PACA_EXRFI+EX_R13(r13)
+	GET_SCRATCH0(r13);
+	hrfid
+
 /*
  * Hash table stuff
  */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 8161d66830a2..e76bcacaf150 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -807,4 +807,83 @@ static int __init disable_hardlockup_detector(void)
 	return 0;
 }
 early_initcall(disable_hardlockup_detector);
+
+#ifdef CONFIG_PPC_BOOK3S_64
+static enum l1d_flush_type enabled_flush_types;
+static void *l1d_flush_fallback_area;
+bool rfi_flush;
+
+static void do_nothing(void *unused)
+{
+	/*
+	 * We don't need to do the flush explicitly, just enter+exit kernel is
+	 * sufficient, the RFI exit handlers will do the right thing.
+	 */
+}
+
+void rfi_flush_enable(bool enable)
+{
+	if (rfi_flush == enable)
+		return;
+
+	if (enable) {
+		do_rfi_flush_fixups(enabled_flush_types);
+		on_each_cpu(do_nothing, NULL, 1);
+	} else
+		do_rfi_flush_fixups(L1D_FLUSH_NONE);
+
+	rfi_flush = enable;
+}
+
+static void init_fallback_flush(void)
+{
+	u64 l1d_size, limit;
+	int cpu;
+
+	l1d_size = ppc64_caches.dsize;
+	limit = min(safe_stack_limit(), ppc64_rma_size);
+
+	/*
+	 * Align to L1d size, and size it at 2x L1d size, to catch possible
+	 * hardware prefetch runoff. We don't have a recipe for load patterns to
+	 * reliably avoid the prefetcher.
+	 */
+	l1d_flush_fallback_area = __va(memblock_alloc_base(l1d_size * 2, l1d_size, limit));
+	memset(l1d_flush_fallback_area, 0, l1d_size * 2);
+
+	for_each_possible_cpu(cpu) {
+		/*
+		 * The fallback flush is currently coded for 8-way
+		 * associativity. Different associativity is possible, but it
+		 * will be treated as 8-way and may not evict the lines as
+		 * effectively.
+		 *
+		 * 128 byte lines are mandatory.
+		 */
+		u64 c = l1d_size / 8;
+
+		paca[cpu].rfi_flush_fallback_area = l1d_flush_fallback_area;
+		paca[cpu].l1d_flush_congruence = c;
+		paca[cpu].l1d_flush_sets = c / 128;
+	}
+}
+
+void __init setup_rfi_flush(enum l1d_flush_type types, bool enable)
+{
+	if (types & L1D_FLUSH_FALLBACK) {
+		pr_info("rfi-flush: Using fallback displacement flush\n");
+		init_fallback_flush();
+	}
+
+	if (types & L1D_FLUSH_ORI)
+		pr_info("rfi-flush: Using ori type flush\n");
+
+	if (types & L1D_FLUSH_MTTRIG)
+		pr_info("rfi-flush: Using mttrig type flush\n");
+
+	enabled_flush_types = types;
+
+	rfi_flush_enable(enable);
+}
+#endif /* CONFIG_PPC_BOOK3S_64 */
 #endif
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 1db685104ffc..b542a80477c8 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -72,6 +72,15 @@ SECTIONS
 	/* Read-only data */
 	RODATA
 
+#ifdef CONFIG_PPC64
+	. = ALIGN(8);
+	__rfi_flush_fixup : AT(ADDR(__rfi_flush_fixup) - LOAD_OFFSET) {
+		__start___rfi_flush_fixup = .;
+		*(__rfi_flush_fixup)
+		__stop___rfi_flush_fixup = .;
+	}
+#endif
+
 	EXCEPTION_TABLE(0)
 
 	NOTES :kernel :notes
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 7ce3870d7ddd..a18d648d31a6 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -20,6 +20,7 @@
 #include <asm/code-patching.h>
 #include <asm/page.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 
 
 struct fixup_entry {
@@ -113,6 +114,47 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 	}
 }
 
+#ifdef CONFIG_PPC_BOOK3S_64
+void do_rfi_flush_fixups(enum l1d_flush_type types)
+{
+	unsigned int instrs[3], *dest;
+	long *start, *end;
+	int i;
+
+	start = PTRRELOC(&__start___rfi_flush_fixup),
+	end = PTRRELOC(&__stop___rfi_flush_fixup);
+
+	instrs[0] = 0x60000000; /* nop */
+	instrs[1] = 0x60000000; /* nop */
+	instrs[2] = 0x60000000; /* nop */
+
+	if (types & L1D_FLUSH_FALLBACK)
+		/* b .+16 to fallback flush */
+		instrs[0] = 0x48000010;
+
+	i = 0;
+	if (types & L1D_FLUSH_ORI) {
+		instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
+		instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/
+	}
+
+	if (types & L1D_FLUSH_MTTRIG)
+		instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */
+
+	for (i = 0; start < end; start++, i++) {
+		dest = (void *)start + *start;
+
+		pr_devel("patching dest %lx\n", (unsigned long)dest);
+
+		patch_instruction(dest, instrs[0]);
+		patch_instruction(dest + 1, instrs[1]);
+		patch_instruction(dest + 2, instrs[2]);
+	}
+
+	printk(KERN_DEBUG "rfi-flush: patched %d locations\n", i);
+}
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
 void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 {
 	long *start, *end;
-- 
2.14.1

[PATCH v4.1 backport 08/15] powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti

[Michael Ellerman]

commit bc9c9304a45480797e13a8e1df96ffcf44fb62fe upstream.

Because there may be some performance overhead of the RFI flush, add
kernel command line options to disable it.

We add a sensibly named 'no_rfi_flush' option, but we also hijack the
x86 option 'nopti'. The RFI flush is not the same as KPTI, but if we
see 'nopti' we can guess that the user is trying to avoid any overhead
of Meltdown mitigations, and it means we don't have to educate every
one about a different command line option.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/setup_64.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index e76bcacaf150..a3993ac21b50 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -811,8 +811,29 @@ early_initcall(disable_hardlockup_detector);
 #ifdef CONFIG_PPC_BOOK3S_64
 static enum l1d_flush_type enabled_flush_types;
 static void *l1d_flush_fallback_area;
+static bool no_rfi_flush;
 bool rfi_flush;
 
+static int __init handle_no_rfi_flush(char *p)
+{
+	pr_info("rfi-flush: disabled on command line.");
+	no_rfi_flush = true;
+	return 0;
+}
+early_param("no_rfi_flush", handle_no_rfi_flush);
+
+/*
+ * The RFI flush is not KPTI, but because users will see doco that says to use
+ * nopti we hijack that option here to also disable the RFI flush.
+ */
+static int __init handle_no_pti(char *p)
+{
+	pr_info("rfi-flush: disabling due to 'nopti' on command line.\n");
+	handle_no_rfi_flush(NULL);
+	return 0;
+}
+early_param("nopti", handle_no_pti);
+
 static void do_nothing(void *unused)
 {
 	/*
@@ -883,7 +904,8 @@ void __init setup_rfi_flush(enum l1d_flush_type types, bool enable)
 
 	enabled_flush_types = types;
 
-	rfi_flush_enable(enable);
+	if (!no_rfi_flush)
+		rfi_flush_enable(enable);
 }
 #endif /* CONFIG_PPC_BOOK3S_64 */
 #endif
-- 
2.14.1

[PATCH v4.1 backport 09/15] powerpc/64s: Improve RFI L1-D cache flush fallback

[Michael Ellerman]

From: Nicholas Piggin <npiggin@gmail.com>

commit bfcd89a1d61a4a6bca3319e2ab70d7c745baf823 upstream.

The fallback RFI flush is used when firmware does not provide a way
to flush the cache. It's a "displacement flush" that evicts useful
data by displacing it with an uninteresting buffer.

The flush has to take care to work with implementation specific cache
replacment policies, so the recipe has been in flux. The initial
slow but conservative approach is to touch all lines of a congruence
class, with dependencies between each load. It has since been
determined that a linear pattern of loads without dependencies is
sufficient, and is significantly faster.

Measuring the speed of a null syscall with RFI fallback flush enabled
gives the relative improvement:

P8 - 1.83x
P9 - 1.75x

The flush also becomes simpler and more adaptable to different cache
geometries.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/paca.h      |  3 +-
 arch/powerpc/kernel/asm-offsets.c    |  3 +-
 arch/powerpc/kernel/exceptions-64s.S | 76 +++++++++++++++++-------------------
 arch/powerpc/kernel/setup_64.c       | 13 +-----
 4 files changed, 39 insertions(+), 56 deletions(-)

diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 45e2aefece16..08e5df3395fa 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -199,8 +199,7 @@ struct paca_struct {
 	 */
 	u64 exrfi[13] __aligned(0x80);
 	void *rfi_flush_fallback_area;
-	u64 l1d_flush_congruence;
-	u64 l1d_flush_sets;
+	u64 l1d_flush_size;
 #endif
 };
 
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 69761d8ad871..23fe603a98d3 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -246,8 +246,7 @@ int main(void)
 	DEFINE(PACA_IN_MCE, offsetof(struct paca_struct, in_mce));
 	DEFINE(PACA_RFI_FLUSH_FALLBACK_AREA, offsetof(struct paca_struct, rfi_flush_fallback_area));
 	DEFINE(PACA_EXRFI, offsetof(struct paca_struct, exrfi));
-	DEFINE(PACA_L1D_FLUSH_CONGRUENCE, offsetof(struct paca_struct, l1d_flush_congruence));
-	DEFINE(PACA_L1D_FLUSH_SETS, offsetof(struct paca_struct, l1d_flush_sets));
+	DEFINE(PACA_L1D_FLUSH_SIZE, offsetof(struct paca_struct, l1d_flush_size));
 #endif
 	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
 	DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 9c102be8cd97..3b8991df5101 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1579,39 +1579,37 @@ rfi_flush_fallback:
 	std	r9,PACA_EXRFI+EX_R9(r13)
 	std	r10,PACA_EXRFI+EX_R10(r13)
 	std	r11,PACA_EXRFI+EX_R11(r13)
-	std	r12,PACA_EXRFI+EX_R12(r13)
-	std	r8,PACA_EXRFI+EX_R13(r13)
 	mfctr	r9
 	ld	r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
-	ld	r11,PACA_L1D_FLUSH_SETS(r13)
-	ld	r12,PACA_L1D_FLUSH_CONGRUENCE(r13)
-	/*
-	 * The load adresses are at staggered offsets within cachelines,
-	 * which suits some pipelines better (on others it should not
-	 * hurt).
-	 */
-	addi	r12,r12,8
+	ld	r11,PACA_L1D_FLUSH_SIZE(r13)
+	srdi	r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
 	mtctr	r11
 	DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
 
 	/* order ld/st prior to dcbt stop all streams with flushing */
 	sync
-1:	li	r8,0
-	.rept	8 /* 8-way set associative */
-	ldx	r11,r10,r8
-	add	r8,r8,r12
-	xor	r11,r11,r11	// Ensure r11 is 0 even if fallback area is not
-	add	r8,r8,r11	// Add 0, this creates a dependency on the ldx
-	.endr
-	addi	r10,r10,128 /* 128 byte cache line */
+
+	/*
+	 * The load adresses are at staggered offsets within cachelines,
+	 * which suits some pipelines better (on others it should not
+	 * hurt).
+	 */
+1:
+	ld	r11,(0x80 + 8)*0(r10)
+	ld	r11,(0x80 + 8)*1(r10)
+	ld	r11,(0x80 + 8)*2(r10)
+	ld	r11,(0x80 + 8)*3(r10)
+	ld	r11,(0x80 + 8)*4(r10)
+	ld	r11,(0x80 + 8)*5(r10)
+	ld	r11,(0x80 + 8)*6(r10)
+	ld	r11,(0x80 + 8)*7(r10)
+	addi	r10,r10,0x80*8
 	bdnz	1b
 
 	mtctr	r9
 	ld	r9,PACA_EXRFI+EX_R9(r13)
 	ld	r10,PACA_EXRFI+EX_R10(r13)
 	ld	r11,PACA_EXRFI+EX_R11(r13)
-	ld	r12,PACA_EXRFI+EX_R12(r13)
-	ld	r8,PACA_EXRFI+EX_R13(r13)
 	GET_SCRATCH0(r13);
 	rfid
 
@@ -1622,39 +1620,37 @@ hrfi_flush_fallback:
 	std	r9,PACA_EXRFI+EX_R9(r13)
 	std	r10,PACA_EXRFI+EX_R10(r13)
 	std	r11,PACA_EXRFI+EX_R11(r13)
-	std	r12,PACA_EXRFI+EX_R12(r13)
-	std	r8,PACA_EXRFI+EX_R13(r13)
 	mfctr	r9
 	ld	r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
-	ld	r11,PACA_L1D_FLUSH_SETS(r13)
-	ld	r12,PACA_L1D_FLUSH_CONGRUENCE(r13)
-	/*
-	 * The load adresses are at staggered offsets within cachelines,
-	 * which suits some pipelines better (on others it should not
-	 * hurt).
-	 */
-	addi	r12,r12,8
+	ld	r11,PACA_L1D_FLUSH_SIZE(r13)
+	srdi	r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
 	mtctr	r11
 	DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
 
 	/* order ld/st prior to dcbt stop all streams with flushing */
 	sync
-1:	li	r8,0
-	.rept	8 /* 8-way set associative */
-	ldx	r11,r10,r8
-	add	r8,r8,r12
-	xor	r11,r11,r11	// Ensure r11 is 0 even if fallback area is not
-	add	r8,r8,r11	// Add 0, this creates a dependency on the ldx
-	.endr
-	addi	r10,r10,128 /* 128 byte cache line */
+
+	/*
+	 * The load adresses are at staggered offsets within cachelines,
+	 * which suits some pipelines better (on others it should not
+	 * hurt).
+	 */
+1:
+	ld	r11,(0x80 + 8)*0(r10)
+	ld	r11,(0x80 + 8)*1(r10)
+	ld	r11,(0x80 + 8)*2(r10)
+	ld	r11,(0x80 + 8)*3(r10)
+	ld	r11,(0x80 + 8)*4(r10)
+	ld	r11,(0x80 + 8)*5(r10)
+	ld	r11,(0x80 + 8)*6(r10)
+	ld	r11,(0x80 + 8)*7(r10)
+	addi	r10,r10,0x80*8
 	bdnz	1b
 
 	mtctr	r9
 	ld	r9,PACA_EXRFI+EX_R9(r13)
 	ld	r10,PACA_EXRFI+EX_R10(r13)
 	ld	r11,PACA_EXRFI+EX_R11(r13)
-	ld	r12,PACA_EXRFI+EX_R12(r13)
-	ld	r8,PACA_EXRFI+EX_R13(r13)
 	GET_SCRATCH0(r13);
 	hrfid
 
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index a3993ac21b50..55d8da909db5 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -873,19 +873,8 @@ static void init_fallback_flush(void)
 	memset(l1d_flush_fallback_area, 0, l1d_size * 2);
 
 	for_each_possible_cpu(cpu) {
-		/*
-		 * The fallback flush is currently coded for 8-way
-		 * associativity. Different associativity is possible, but it
-		 * will be treated as 8-way and may not evict the lines as
-		 * effectively.
-		 *
-		 * 128 byte lines are mandatory.
-		 */
-		u64 c = l1d_size / 8;
-
 		paca[cpu].rfi_flush_fallback_area = l1d_flush_fallback_area;
-		paca[cpu].l1d_flush_congruence = c;
-		paca[cpu].l1d_flush_sets = c / 128;
+		paca[cpu].l1d_flush_size = l1d_size;
 	}
 }
 
-- 
2.14.1

[PATCH v4.1 backport 10/15] powerpc/pseries: Query hypervisor for RFI flush settings

[Michael Ellerman]

From: Michael Neuling <mikey@neuling.org>

commit 8989d56878a7735dfdb234707a2fee6faf631085 upstream.

A new hypervisor call is available which tells the guest settings
related to the RFI flush. Use it to query the appropriate flush
instruction(s), and whether the flush is required.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/platforms/pseries/setup.c | 37 +++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index e6e8b241d717..b4867b4d5a1e 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -507,6 +507,39 @@ static void __init find_and_init_phbs(void)
 	}
 }
 
+static void pseries_setup_rfi_flush(void)
+{
+	struct h_cpu_char_result result;
+	enum l1d_flush_type types;
+	bool enable;
+	long rc;
+
+	/* Enable by default */
+	enable = true;
+
+	rc = plpar_get_cpu_characteristics(&result);
+	if (rc == H_SUCCESS) {
+		types = L1D_FLUSH_NONE;
+
+		if (result.character & H_CPU_CHAR_L1D_FLUSH_TRIG2)
+			types |= L1D_FLUSH_MTTRIG;
+		if (result.character & H_CPU_CHAR_L1D_FLUSH_ORI30)
+			types |= L1D_FLUSH_ORI;
+
+		/* Use fallback if nothing set in hcall */
+		if (types == L1D_FLUSH_NONE)
+			types = L1D_FLUSH_FALLBACK;
+
+		if (!(result.behaviour & H_CPU_BEHAV_L1D_FLUSH_PR))
+			enable = false;
+	} else {
+		/* Default to fallback if case hcall is not available */
+		types = L1D_FLUSH_FALLBACK;
+	}
+
+	setup_rfi_flush(types, enable);
+}
+
 static void __init pSeries_setup_arch(void)
 {
 	set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
@@ -523,7 +556,9 @@ static void __init pSeries_setup_arch(void)
 
 	fwnmi_init();
 
-	/* By default, only probe PCI (can be overriden by rtas_pci) */
+	pseries_setup_rfi_flush();
+
+	/* By default, only probe PCI (can be overridden by rtas_pci) */
 	pci_add_flags(PCI_PROBE_ONLY);
 
 	/* Find and initialize PCI host bridges */
-- 
2.14.1

[PATCH v4.1 backport 11/15] powerpc/powernv: Check device-tree for RFI flush settings

[Michael Ellerman]

From: Oliver O'Halloran <oohall@gmail.com>

commit 6e032b350cd1fdb830f18f8320ef0e13b4e24094 upstream.

New device-tree properties are available which tell the hypervisor
settings related to the RFI flush. Use them to determine the
appropriate flush instruction to use, and whether the flush is
required.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/platforms/powernv/setup.c | 49 ++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 20974478f8d0..e3c98361e6e4 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -38,14 +38,63 @@
 #include <asm/cputhreads.h>
 #include <asm/cpuidle.h>
 #include <asm/code-patching.h>
+#include <asm/setup.h>
 
 #include "powernv.h"
 #include "subcore.h"
 
+static void pnv_setup_rfi_flush(void)
+{
+	struct device_node *np, *fw_features;
+	enum l1d_flush_type type;
+	int enable;
+
+	/* Default to fallback in case fw-features are not available */
+	type = L1D_FLUSH_FALLBACK;
+	enable = 1;
+
+	np = of_find_node_by_name(NULL, "ibm,opal");
+	fw_features = of_get_child_by_name(np, "fw-features");
+	of_node_put(np);
+
+	if (fw_features) {
+		np = of_get_child_by_name(fw_features, "inst-l1d-flush-trig2");
+		if (np && of_property_read_bool(np, "enabled"))
+			type = L1D_FLUSH_MTTRIG;
+
+		of_node_put(np);
+
+		np = of_get_child_by_name(fw_features, "inst-l1d-flush-ori30,30,0");
+		if (np && of_property_read_bool(np, "enabled"))
+			type = L1D_FLUSH_ORI;
+
+		of_node_put(np);
+
+		/* Enable unless firmware says NOT to */
+		enable = 2;
+		np = of_get_child_by_name(fw_features, "needs-l1d-flush-msr-hv-1-to-0");
+		if (np && of_property_read_bool(np, "disabled"))
+			enable--;
+
+		of_node_put(np);
+
+		np = of_get_child_by_name(fw_features, "needs-l1d-flush-msr-pr-0-to-1");
+		if (np && of_property_read_bool(np, "disabled"))
+			enable--;
+
+		of_node_put(np);
+		of_node_put(fw_features);
+	}
+
+	setup_rfi_flush(type, enable > 0);
+}
+
 static void __init pnv_setup_arch(void)
 {
 	set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
 
+	pnv_setup_rfi_flush();
+
 	/* Initialize SMP */
 	pnv_smp_init();
 
-- 
2.14.1

[PATCH v4.1 backport 12/15] powerpc/64s: Allow control of RFI flush via debugfs

[Michael Ellerman]

commit 236003e6b5443c45c18e613d2b0d776a9f87540e upstream.

Expose the state of the RFI flush (enabled/disabled) via debugfs, and
allow it to be enabled/disabled at runtime.

eg: $ cat /sys/kernel/debug/powerpc/rfi_flush
    1
    $ echo 0 > /sys/kernel/debug/powerpc/rfi_flush
    $ cat /sys/kernel/debug/powerpc/rfi_flush
    0

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/setup_64.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 55d8da909db5..ec01a98a5978 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -38,6 +38,7 @@
 #include <linux/hugetlb.h>
 #include <linux/memory.h>
 #include <linux/nmi.h>
+#include <linux/debugfs.h>
 
 #include <asm/io.h>
 #include <asm/kdump.h>
@@ -896,5 +897,34 @@ void __init setup_rfi_flush(enum l1d_flush_type types, bool enable)
 	if (!no_rfi_flush)
 		rfi_flush_enable(enable);
 }
+
+#ifdef CONFIG_DEBUG_FS
+static int rfi_flush_set(void *data, u64 val)
+{
+	if (val == 1)
+		rfi_flush_enable(true);
+	else if (val == 0)
+		rfi_flush_enable(false);
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int rfi_flush_get(void *data, u64 *val)
+{
+	*val = rfi_flush ? 1 : 0;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_rfi_flush, rfi_flush_get, rfi_flush_set, "%llu\n");
+
+static __init int rfi_flush_debugfs_init(void)
+{
+	debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL, &fops_rfi_flush);
+	return 0;
+}
+device_initcall(rfi_flush_debugfs_init);
+#endif
 #endif /* CONFIG_PPC_BOOK3S_64 */
 #endif
-- 
2.14.1

[PATCH v4.1 backport 13/15] powerpc/pseries: include linux/types.h in asm/hvcall.h

[Michael Ellerman]

From: Michal Suchanek <msuchanek@suse.de>

commit 1b689a95ce7427075f9ac9fb4aea1af530742b7f upstream.

Commit 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush
settings") uses u64 in asm/hvcall.h without including linux/types.h

This breaks hvcall.h users that do not include the header themselves.

Fixes: 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/include/asm/hvcall.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 51adbde09845..449bbb87c257 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -298,6 +298,7 @@
 #define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR	(1ull << 61) // IBM bit 2
 
 #ifndef __ASSEMBLY__
+#include <linux/types.h>
 
 /**
  * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
-- 
2.14.1

[PATCH v4.1 backport 14/15] powerpc/ptrace: Fix out of bounds array access warning

[Michael Ellerman]

From: Khem Raj <raj.khem@gmail.com>

commit 1e407ee3b21f981140491d5b8a36422979ca246f upstream.

gcc-6 correctly warns about a out of bounds access

arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
        offsetof(struct thread_fp_state, fpr[32][0]));
                        ^

check the end of array instead of beginning of next element to fix this

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/ptrace.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index f21897b42057..93f200f14e19 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -376,7 +376,7 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 
 #else
 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
-		     offsetof(struct thread_fp_state, fpr[32][0]));
+		     offsetof(struct thread_fp_state, fpr[32]));
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fp_state, 0, -1);
@@ -404,7 +404,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 	return 0;
 #else
 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
-		     offsetof(struct thread_fp_state, fpr[32][0]));
+		     offsetof(struct thread_fp_state, fpr[32]));
 
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fp_state, 0, -1);
-- 
2.14.1

[PATCH v4.1 backport 15/15] powerpc/vdso64: Use double word compare on pointers

[Michael Ellerman]

From: Anton Blanchard <anton@samba.org>

commit 5045ea37377ce8cca6890d32b127ad6770e6dce5 upstream.

__kernel_get_syscall_map() and __kernel_clock_getres() use cmpli to
check if the passed in pointer is non zero. cmpli maps to a 32 bit
compare on binutils, so we ignore the top 32 bits.

A simple test case can be created by passing in a bogus pointer with
the bottom 32 bits clear. Using a clk_id that is handled by the VDSO,
then one that is handled by the kernel shows the problem:

  printf("%d\n", clock_getres(CLOCK_REALTIME, (void *)0x100000000));
  printf("%d\n", clock_getres(CLOCK_BOOTTIME, (void *)0x100000000));

And we get:

  0
  -1

The bigger issue is if we pass a valid pointer with the bottom 32 bits
clear, in this case we will return success but won't write any data
to the pointer.

I stumbled across this issue because the LLVM integrated assembler
doesn't accept cmpli with 3 arguments. Fix this by converting them to
cmpldi.

Fixes: a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel")
Cc: stable@vger.kernel.org # v2.6.15+
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/vdso64/datapage.S     | 2 +-
 arch/powerpc/kernel/vdso64/gettimeofday.S | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index 79796de11737..3263ee23170d 100644
--- a/arch/powerpc/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -57,7 +57,7 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
 	bl	V_LOCAL_FUNC(__get_datapage)
 	mtlr	r12
 	addi	r3,r3,CFG_SYSCALL_MAP64
-	cmpli	cr0,r4,0
+	cmpldi	cr0,r4,0
 	crclr	cr0*4+so
 	beqlr
 	li	r0,__NR_syscalls
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index a76b4af37ef2..382021324883 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -145,7 +145,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres)
 	bne	cr0,99f
 
 	li	r3,0
-	cmpli	cr0,r4,0
+	cmpldi	cr0,r4,0
 	crclr	cr0*4+so
 	beqlr
 	lis	r5,CLOCK_REALTIME_RES@h
-- 
2.14.1

Re: [PATCH v4.1 backport 00/15] powerpc stable backports for v4.1

[Sasha Levin]

All queued up, thank you!

On Fri, Mar 02, 2018 at 03:45:34PM +1100, Michael Ellerman wrote:
>Hi Sasha,
>
>This is a backport to v4.1 of the RFI flush series that went upstream rece=
ntly.
>There's also a few other commits I noticed had not made it to v4.1.
>
>cheers

--=20

Thanks,
Sasha=