[PATCH 11/14] ASoC: soc-acpi: fix all kernel-doc warnings

[Randy Dunlap <rdunlap@infradead.org>]

Add missing "struct" keyword to kernel-doc for structs.
Describe @mach_params in struct snd_soc_acpi_mach.
Don't document callback parameters with '@' as though they are kernel-doc.

These changes avoid all kernel-doc warnings in this header file.

Examples:
Warning: ../include/sound/soc-acpi.h:77 cannot understand function prototype: 'struct snd_soc_acpi_mach_params'
Warning: ../include/sound/soc-acpi.h:101 cannot understand function prototype: 'struct snd_soc_acpi_endpoint'
Warning: ../include/sound/soc-acpi.h:115 cannot understand function prototype: 'struct snd_soc_acpi_adr_device'
Warning: ../include/sound/soc-acpi.h:132 cannot understand function prototype: 'struct snd_soc_acpi_link_adr'
Warning: ../include/sound/soc-acpi.h:209 cannot understand function prototype: 'struct snd_soc_acpi_mach'

Warning: include/sound/soc-acpi.h:230 struct member 'mach_params' not described in 'snd_soc_acpi_mach'
Warning: include/sound/soc-acpi.h:230 Excess struct member 'card' description in 'snd_soc_acpi_mach'
Warning: include/sound/soc-acpi.h:230 Excess struct member 'mach' description in 'snd_soc_acpi_mach'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
---
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>

 include/sound/soc-acpi.h |   23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

--- linext-2026-0710.orig/include/sound/soc-acpi.h
+++ linext-2026-0710/include/sound/soc-acpi.h
@@ -57,7 +57,7 @@ static inline struct snd_soc_acpi_mach *
 #endif
 
 /**
- * snd_soc_acpi_mach_params: interface for machine driver configuration
+ * struct snd_soc_acpi_mach_params - interface for machine driver configuration
  *
  * @acpi_ipc_irq_index: used for BYT-CR detection
  * @platform: string used for HDAudio codec support
@@ -93,7 +93,7 @@ struct snd_soc_acpi_mach_params {
 };
 
 /**
- * snd_soc_acpi_endpoint - endpoint descriptor
+ * struct snd_soc_acpi_endpoint - endpoint descriptor
  * @num: endpoint number (mandatory, unique per device)
  * @aggregated: 0 (independent) or 1 (logically grouped)
  * @group_position: zero-based order (only when @aggregated is 1)
@@ -107,7 +107,7 @@ struct snd_soc_acpi_endpoint {
 };
 
 /**
- * snd_soc_acpi_adr_device - descriptor for _ADR-enumerated device
+ * struct snd_soc_acpi_adr_device - descriptor for _ADR-enumerated device
  * @adr: 64 bit ACPI _ADR value
  * @num_endpoints: number of endpoints for this device
  * @endpoints: array of endpoints
@@ -121,7 +121,7 @@ struct snd_soc_acpi_adr_device {
 };
 
 /**
- * snd_soc_acpi_link_adr - ACPI-based list of _ADR enumerated devices
+ * struct snd_soc_acpi_link_adr - ACPI-based list of _ADR enumerated devices
  * @mask: one bit set indicates the link this list applies to
  * @num_adr: ARRAY_SIZE of devices
  * @adr_d: array of devices
@@ -167,8 +167,8 @@ struct snd_soc_acpi_link_adr {
 #define SND_SOC_ACPI_TPLG_INTEL_CODEC_NAME BIT(4)
 
 /**
- * snd_soc_acpi_mach: ACPI-based machine descriptor. Most of the fields are
- * related to the hardware, except for the firmware and topology file names.
+ * struct snd_soc_acpi_mach - ACPI-based machine descriptor. Most of the fields
+ * are related to the hardware, except for the firmware and topology file names.
  * A platform supported by legacy and Sound Open Firmware (SOF) would expose
  * all firmware/topology related fields.
  *
@@ -192,6 +192,7 @@ struct snd_soc_acpi_link_adr {
  * the initial selection in the snd_soc_acpi_mach table.
  * @pdata: intended for platform data or machine specific-ops. This structure
  *  is not constant since this field may be updated at run-time
+ * @mach_params: machine driver configuration
  * @sof_tplg_filename: Sound Open Firmware topology file name, if enabled
  * @tplg_quirk_mask: quirks to select different topology files dynamically
  * @get_function_tplg_files: This is an optional callback, if specified then instead of
@@ -199,11 +200,11 @@ struct snd_soc_acpi_link_adr {
  *	files to be loaded.
  *	Return value: The number of the files or negative ERRNO. 0 means that the single topology
  *		      file should be used, no function topology split can be used on the machine.
- *	@card: the pointer of the card
- *	@mach: the pointer of the machine driver
- *	@prefix: the prefix of the topology file name. Typically, it is the path.
- *	@tplg_files: the pointer of the array of the topology file names.
- *	@best_effort: ignore non supported links and try to build the card in best effort
+ *	card: the pointer of the card
+ *	mach: the pointer of the machine driver
+ *	prefix: the prefix of the topology file name. Typically, it is the path.
+ *	tplg_files: the pointer of the array of the topology file names.
+ *	best_effort: ignore non supported links and try to build the card in best effort
  *		      with supported links
  */
 /* Descriptor for SST ASoC machine driver */